Close loophole that would allow you to assign more memory than the
system has to a podman machine
Fixes: #18206
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman machine reset now removes and resets machines from all providers availabe on the platform.
On windows, if the user is does not have admin privs, machine will only reset WSL, but will emit a warning that it is unable to remove hyperV machines without elevated privs.
Signed-off-by: Ashley Cui <acui@redhat.com>
The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a user specifies a invalid connection in CONTAINER_CONNECTION then
podman should return a proper error saying so. Currently it ignored the
error and in rootFlags() just exited early with defining any flags. This
caused a panic then when trying to use the flags later.
In order to address this first store the connection error in the
PodmanConfig struct and not abort right away during flag setup. This is
important as the user might have specified a flag with a valid remote
connection. As such we check all flags and only when none were given we
return the connection error.
Also while at it I noticed that the default connection reported via
podman --help was wrong as it only used the old containers.conf field
for it and did not consider the podman-connections.json default.
New regression tests have been added to make sure it behaves correctly.
This fixes the problem reported in the PR #22997.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a new flag that allows to override the pull options configured in
the storage.conf file.
e.g.: --pull-option="enable_partial_images=false" can be specified to
Podman to disable partial pulls even if enabled.
Leave it as a hidden configuration flag for now since the API itself
is marked as experimental in c/storage.
Currently c/storage doesn't honor the overrides, being fixed with
https://github.com/containers/storage/pull/1966
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is the same as what --squash-all is doing, and we already support
--squash with --layers=true since this is the default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Testing `podman system check` requires that we have a way to
intentionally introduce storage corruptions. Add a hidden `podman
testing` command that provides the necessary internal logic in
subcommands. Stub out the tunnel implementation for now.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add a `podman system check` that performs consistency checks on local
storage, optionally removing damaged items so that they can be
recreated.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
Use the configuration parameters from the newly introduced
PodmanshConfig struct. This allows podmansh to be configured via
configuration files.
Signed-off-by: phoenix <felix.niederwanger@suse.com>
The function that's handing us events will return an error after closing
the channel over which it's sending events, and its caller (in its own
goroutine) will then send that error over another channel.
The logic that started the goroutine is likely to notice that the events
channel is closed before noticing that the error channel has a result
for it to read, so any error that would have been communicated would be
lost.
When we finish reading events, check if the reader returned an error
before telling our caller that there was no error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
Docker shows exposed ports as just PORT/PROTO so match that behavior. It
is not clear to me why someone needs that information in ps as "expose"
doesn't effect anything networking related.
Fixes https://issues.redhat.com/browse/RHEL-32154
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Contains a breaking change but also besides this renovate is not able to
update the import paths so this needs to be done by hand.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Windows is not guaranteed to have the SSH feature installed, so prefer the use
of the built-in ssh client for all operations other than podman machine ssh,
which requires terminal pty logic. This restores previous behavior in 4.x.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We need to take another lock to prevent concurrent starts from different
machines.
I manually tested it by starting three VM in parallel with:
podman machine start & podman machine start test1 & podman machine start test2
I also added a CI test that seems to work as expected (failed with the
old binary, worked with the new)
Before this patch I was able to start more than VM, with this patch it
now only starts one of them and the other ones will fail to start with
a proper error.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Move the writes into the shim level to make sure they happen while we
hold the machine lock to prevent any race conditions reading/writing the
file.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First make sure we check that a given VM exist when holding the VM lock
for it. The check in cmd/podman/machine/init.go is a nice quick out but
not enough to ensure that 2 processes to not create the same VM at the
same time. The only way to ensure this is by holding the lock and
checking if the VM config file exists.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure we only update the machine config when we are locked.
While it doesn't make a functional differnce for cpu and memory it was a
problem for disk size. The disk size must be larger than the previous
one so we must have accurate data on the previous value.
Thus change the settings only while locked and refresh the config so we
have the current up to date values.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
