Support loading and saving tarballs with more than one image.
Add a new `/libpod/images/export` endpoint to the rest API to
allow for exporting/saving multiple images into an archive.
Note that a non-release version of containers/image is vendored.
A release version must be vendored before cutting a new Podman
release. We force the containers/image version via a replace in
the go.mod file; this way go won't try to match the versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add support for generating systemd units
via the api and podman-remote.
Change the GenerateSystemdReport type to return the
units as map[string]string with the unit name as key.
Add `--format` flag to `podman generate systemd`
to allow the output to be formatted as json.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The APIv2 pod endpoints that operate on multiple containers, such
as Start, Kill, Pause, Unpause, do not report errors encountered
by individual containers, because they incorrectly assume that
any error is fatal. The documentation for the Libpod API calls
notes, however, that ErrPodPartialFail will *always* be returned
if any container failed; so we need to ignore that error and
continue to collating and returning container errors.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
`podman image search` returned wrong results for the image "Description" as
it was mapped to the wrong field ("ID") in the search results.
Basically cherry-picked into the api from
commit cf5c63b5c492e41d72b6e3b6d75b5f39b0a957fd.
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
Currently you can only specify multiple character for image names
when executing podman-remote commit
podman-remote commit a b
Will complete, but will save the image without a name.
podman-remote commit a bb
Works.
This PR fixes and now returns an error if the user doees not specify an
image name to commit to.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In the API, we are currently returning the image time of creation
as a string, in time.Time format. The API is for a 64 bit integer
representing Unix time.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
move the chown for newly created volumes after the spec generation so
the correct UID/GID are known.
Closes: https://github.com/containers/libpod/issues/5698
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The swagdoc in `register_volumes.go` already correctly notes that a 201
should be returned upon success, so we only need to change the handler
to match the spec.
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes#6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format.
Fixes: #6409
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add copy endpoint inputs and outputs. these endpoints are not implemented yet, nor are any bindings. this allows us to update this later without having to change our api version.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
The length and size of our error messages on failure to pull
is huge. This patch at least eliminates some of the wrapping.
But I think eventually we need to look at containers/image
and see if we can modify the error messages to something a little
more human friendly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
