Run root e2e & system tests using composefs on rawhide.
Write magic settings to storage.conf. That part is easy.
e2e tests, however, ignore storage.conf. They require everything
to be specified on the command line. And "everything", in the
case of composefs, includes a long complicated --pull-options
string which in turn requires containers-storage PR 1966
which, as of this writing, is finally vendored into podman.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
The new file was not really documented, so leave some pointers on how it
works and that the new file should not be edited manually.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We now no longer write containers.conf, instead system connections and
farms are written to a new file called podman-connections.conf.
This is a major rework and I had to change a lot of things to get this
to compile again with my c/common changes.
It is a breaking change for users as connections/farms added before this
commit can now no longer be removed or modified directly. However because
the logic keeps reading from containers.conf the old connections can
still be used to connect to a remote host.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Let's support --config option by setting environment variable
DOCKER_CONFIG instead of ignoring it for docker compatibility, so
it could be used to locate config.json as authentication file.
Also add a test case for this change, remove the deprecated one.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
The docs were rather vague about the deprecation of CNI, make it clear
that we are going to remove it with 5.0 as we decided to do that in our
planning.
Also while looking at the podman network create docs I noticed
--ipam-driver dhcp was still documented as not supported with netavark
so I fixed that as well.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The --module can only be parsed on the root level. It cannot work on
the command level, because it must be "manually" parsed on init() to
make sure the specified configuration files/modules are loaded prior to
parsing the flags via Cobra.
Hence move --module from the "persistent" to the "local" flags which
will yield an error instead of doing nothing when being specified on the
command level:
```
$ ./bin/podman run --module=foo.conf --rm alpine
Error: unknown flag: --module
See 'podman run --help'
```
Reported in #20000.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Support a new concept in containers.conf called "modules". A "module"
is a containers.conf file located at a specific directory. More than
one module can be loaded in the specified order, following existing
override semantics.
There are three directories to load modules from:
- $CONFIG_HOME/containers/containers.conf.modules
- /etc/containers/containers.conf.modules
- /usr/share/containers/containers.conf.modules
With CONFIG_HOME pointing to $HOME/.config or, if set, $XDG_CONFIG_HOME.
Absolute paths will be loaded as is, relative paths will be resolved
relative to the three directories above allowing for admin configs
(/etc/) to override system configs (/usr/share/) and user configs
($CONFIG_HOME) to override admin configs.
Pulls in containers/common/pull/1599.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
**podman compose** is a thin wrapper around an external compose provider
such as docker-compose or podman-compose. This means that `podman
compose` is executing another tool that implements the compose
functionality but sets up the environment in a way to let the compose
provider communicate transparently with the local Podman socket. The
specified options as well the command and argument are passed directly
to the compose provider.
The default compose providers are `docker-compose` and `podman-compose`.
If installed, `docker-compose` takes precedence since it is the original
implementation of the Compose specification and is widely used on the
supported platforms (i.e., Linux, Mac OS, Windows).
If you want to change the default behavior or have a custom installation
path for your provider of choice, please change the `compose_provider`
field in `containers.conf(5)`. You may also set the
`PODMAN_COMPOSE_PROVIDER` environment variable.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Only use the word "please" in these situations:
- reader is asked to do something inconvenient
- reader is asked for permission
- reader is asked for forgiveness
Remove other uses of the word "please" to
make the language more efficient.
[NO NEW TESTS NEEDED]
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Add support for `--imagestore` in podman which allows users to split the filesystem of containers vs image store, imagestore if configured will pull images in image storage instead of the graphRoot while keeping the other parts still in the originally configured graphRoot.
This is an implementation of
https://github.com/containers/storage/pull/1549 in podman.
Signed-off-by: Aditya R <arajan@redhat.com>
- [service_destinations] should be [engine.service_destinations]
- service_destinations does not read from
`/usr/share/containers/containers.conf` because podman uses config.ReadCustomConfig().
Fixes: #15615
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Short description in man pages:
* Use imperative form
Command help (cobra.Command.Short):
* Capitalize first letter
* Use imperative form
* Remove ending full stop when the short description
only contains one sentence without any commas
Command help (cobra.Command.Long):
* Capitalize first letter unless the sentence starts
with a command "podman command ..."
* Use imperative form when the long description is
identical or almost identical to the short description.
This modification was only done in a few places.
Command tables:
* Use imperative form in the "Description" column
[NO NEW TESTS NEEDED]
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
The `--network-cmd-path` CLI option only affects rootless networks using `slirp4netns(1)`, not `pasta(1)`. Following #18568 Podman should rather use the more generic `r.config.FindHelperBinary()` method (and therefore honour the `helper_binaries_dir` config) to find the path to the `slirp4netns` binary and deprecate the misleading `--network-cmd-path` CLI option. However, since this wasn't implemented yet we can't deprecate `--network-cmd-path` as of now. Adding a note anyway.
Fixes#18560
Signed-off-by: Daniel Rudolf <github.com@daniel-rudolf.de>
Commands like podman-create(1), podman-run(1), podman-inspect(1),
podman-ps(1) will emit formatted output upon success. This allows
the output from commands to be emitted directly to a file and
can supersede the --noout parameter by using /dev/null. An issue
with --noout was also remedied.
This closes issue #18120.
Signed-off-by: Ali Rizvi-Santiago <arizvisa@gmail.com>
We had a number of references, mostly in docs, to the word master that
can now be changed to main. This PR does that and makes the project a
bit more inclusive.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
Where the terms CNI and cni are used in documentation like man pages,
readme's, and tutorials, we have begun to add deprecation notices where
applicable. In cases where netavark cannot do what CNI can, those have
been left alone.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This changes references to `/etc/containers/storage.conf` (and similar) to
links to `containers-storage.conf(5)`, as there are alternative locations
for this file.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This handles the transient store options from the container/storage
configuration in the runtime/engine.
Changes are:
* Print transient store status in `podman info`
* Print transient store status in runtime debug output
* Add --transient-store argument to override config option
* Propagate config state to conmon cleanup args so the callback podman
gets the same config.
Note: This doesn't really change any behaviour yet (other than the changes
in containers/storage).
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Command flags (OPTIONS) in man pages have to date been in
haphazard order. Sometimes that order is sensible, e.g.,
most-important options first, but more often they're
just in arbitrary places. This makes life hard for users.
Here, I update the man-page-check Makefile script so it
checks and enforces alphabetical order in OPTIONS sections.
Then -- the hard part -- update all existing man pages to
conform to this requirement.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add some docs about the different network backends. Also remove the CNI
word from network since we refer to either a netavark or CNI config.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Document the recognized `schema` types that can be used in a value
passed to the `--url` command line flag.
[CI:DOCS]
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
