skip the test "podman selinux: shared context in (some) namespaces" on
cgroupsv1 when running as rootless since the tests requires
--pid=container:.
If the container runtime cannot use cgroupsv1 and the container has no
pid namespace. then it is not possible to correctly terminate the
container. Without a cgroup or a pid namespace, the runtime has no
control on what processes are in the container.
Closes: https://github.com/containers/podman/issues/11785
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This matches what docker does. Also make sure the net aliases are also
shown when the container is stopped.
docker-compose uses this special alias entry to check if it is already
correctly connected to the network. [1]
Because we do not support static ips on network connect at the moment
calling disconnect && connect will loose the static ip.
Fixes#11748
[1] 0bea52b18d/compose/service.py (L663-L667)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- logs: remove unnecessary sleeps. This saves ~25s.
Unfortunately, journald seems to have some sort of lag,
so we need to keep retrying until we get the 'after' string.
- ps: add placeholder test for once buildah 3544 is fixed
- cp: bulk-kill containers when finished, instead of one by one.
This is a big change and only saves about 8s per run, but hey.
- mount,pause,healthcheck: 'podman stop -t 0' before rm'ing containers.
Easy 50s.
Have I mentioned, lately, that 'podman rm -f' needs a '-t 0' flag?
- play: same, and also 'podman pod stop'. Seems to shave ~20s.
- socket-activation: UGH! Buggy and useless tests! They were
running "sleep 90" containers for no reason whatsoever. I
assume the intention was to run them with "-d", so that's
what I've done here. Also fixed some language. 180 seconds!
(Unrelated: cleanup in 070-build, use $IMAGE, not alpine)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The podman integration tests run in parallel. Because all tests use the
same CNI config dir the podman network prune test will remove networks
which are used by other tests at the moment and thus creating
unexpected flakes.
The solution use an extra cni config dir for the network prune test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following commit ensures we silently return container id on `stop` if
container was never created in OCI runtime.
Following behaviour ensures that we are in parity with docker.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Fixes: https://github.com/containers/podman/issues/11745
[NO TESTS NEEDED] Since this is just a revendor and a one line
change for the revendor
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When performing an image build with play kube, we need to set the
context directory so things like file copies have the correct input
path.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The shell completion should only suggest arguments that work. Using a
image without tag does not work in many cases. Having both the version
with and without tag also forces users to press one key more because
tab completion will always stop at the colon.
Fixes#11673
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman inspect shows the healthcheck status in `.State.Healthcheck`,
docker uses `.State.Health`. To make sure docker scripts work we
should add the `Health` key. Because we do not want to display both keys
by default we only use the new `Health` key. This is a breaking change
for podman users but matches what docker does. To provide some form of
compatibility users can still use `--format {{.State.Healthcheck}}`. IT
is just not shown by default.
Fixes#11645
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The :U flag can be used to change the ownership of source volumes based on
the UID, GID of the container. This is only supported by the --volume option,
this will allow to use --mount option as well.
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
If the command came from the underlying image, then we should
not include it in the generate yaml file.
Fixes: https://github.com/containers/podman/issues/11672
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The health check result is stored in the container state. Since the
state can change or might not even be set we have to retrive the current
state before we try to read the health check result.
Fixes#11687
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
(Sorry, couldn't resist).
CI flakes have been coming down - thank you to everyone who has
been making them a priority.
This leaves a noisy subset that I've just been ignoring for months:
Running: podman ... -p 8080:something
...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use
Sometimes these are one-time errors resolved on 2nd try; sometimes
they fail three times, forcing CI user to hit Rerun. In all cases
they make noise in my flake logs, which costs me time.
My assumption is that this has to do with ginkgo running random
tests in parallel. Since many e2e tests simplemindedly use 8080,
collisions are inevitable.
Solution: simplemindedly replace 8080 with other (also arbitrarily
picked) numbers. This is imperfect -- it requires human developers
to pick a number NNNN and 'grep NNNN test/e2e/*' before adding
new tests, which I am 100% confident ain't gonna happen -- but
it's better than what we have now.
Side note: I considered writing and using a RandomAvailablePort()
helper, but that would still be racy. Plus, it would be a pain
to interpolate strings into so many places. Finally, with this
hand-tooled approach, if/when we _do_ get conflicts on port NNNN,
it should be very easy to grep for NNNN, find the offending tests
that reuse that port, and fix one of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add an option to `podman save` to allow uncompressed layers when
copying OCI images. Do the neccessary plumbing for the remote client,
add tests and vendor in the latest commit from c/common to fetch
the neccessary changes in libimage.
Closes: #11613
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
psgo added support for listing supplementary groups via
two new descriptors:
* `groups` for supplementary groups inside the container
* `hgroups` for the counterpart on the host
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When building releases, the definitive canonical version of podman (or
podman-remote) is needed. Previously this was accomplished by scraping
`version/version.go`. However, due to tooling differences across
platforms, this has proven problematic, unreliable, and hard to
maintain.
Fix this by building and caching a small golang binary who's only purpose
is to print the version number to stdout. This not only provides a quick
and reliable way to determine the current version, it also acts as a check
on the version API vs tooling that relies on it.
Lastly, remove several `RELEASE_*` Makefile definitions which aren't
actually used anywhere. These were originally added a very long time
ago to serve as part of a long since retired release process. The
remaining items, were updated to make use of the new `.podmanversion`
binary on an as-required basis (i.e. not every time `make` is run).
Signed-off-by: Chris Evich <cevich@redhat.com>
Currently we add the default PATH, TERM and container from Podman
to every kubernetes.yaml file. These values should not be recorded
in the yaml files.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Following PR allows containers to create and mount overlays on top of
named volumes instead of mounting actual volumes via already documented `:O`.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
- Added tests to help ensure there is no future regressions
- Added WaitWithTimeout(int) rather than calling
WaitWithDefaultTimeout() multiple times
- Exposed DefaultWaitTimeout to allow test to use a multiplier
Fixes#2221
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Fix a bug when remotely untagging an image via tag@digest.
The digest has been lost in the remote client and hence led
to a wrong behaviour on the server.
Fixes: #11557
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Docker adds the `sha256:` prefix to the image ID, so our compat endpoint
has to do this as well.
Fixes#11623
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* 070-build:
- remove workaround for #9567, which is closed.
- add many more cases to the ignorefile test,
to test complicated special cases of Buildah PR 3486.
* 160-volumes:
- remove a skip_if_remote, volumes now work on remote
- use a random name for tarball, and clean up when
done using it. This fixes a gating-test failure
(test runs as root, then rootless, and rootless
can't clobber root's file).
Signed-off-by: Ed Santiago <santiago@redhat.com>
The check for net=none was wrong. It just assumed when we do not create
the netns but have one set that we use the none mode. This however also
applies to a container which joins the pod netns.
To correctly check for the none mode use `config.NetMode.IsNone()`.
Fixes#11596
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Standardize on no-trunc through the code.
Alias notruncate where necessary.
Standardize on the man page display of no-trunc.
Fixes: https://github.com/containers/podman/issues/8941
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`podman network create` should not allow users to create networks with a
name which is already used for a network mode in `podman run --network`.
Fixes#11448
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
