Add a new option to allow for mounting artifacts in the container, the
syntax is added to the existing --mount option:
type=artifact,src=$artifactName,dest=/path[,digest=x][,title=x]
This works very similar to image mounts. The name is passed down into
the container config and then on each start we lookup the artifact and
the figure out which blobs to mount. There is no protaction against a
user removing the artifact while still being used in a container. When
the container is running the bind mounted files will stay there (as the
kernel keeps the mounts active even if the bind source was deleted).
On the next start it will fail to start as if it does not find the
artifact. The good thing is that this technically allows someone to
update the artifact with the new file by creating a new artifact with
the same name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I'm not sure if there is an equivalent to CAP_SYS_RESOURCE on FreeBSD
but for now, I have added a no-op stub which returns false.
Signed-off-by: Doug Rabson <dfr@rabson.org>
Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Return the error not just log as the caller can then decide to log this
and exit > 0. I also removed the c.valid check as I do not see what the
purpose of this would be. c.valid is only false when the ctr was removed
but then we should never get there as Cleanup() will not work on a
container in removing state.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We bind ports to ensure there are no conflicts and we leak them into
conmon to keep them open. However we bound the ports after the network
was set up so it was possible for a second network setup to overwrite
the firewall configs of a previous container as it failed only later
when binding the port. As such we must ensure we bind before the network
is set up.
This is not so simple because we still have to take care of
PostConfigureNetNS bool in which case the network set up happens after
we launch conmon. Thus we end up with two different conditions.
Also it is possible that we "leak" the ports that are set on the
container until the garbage collector will close them. This is not
perfect but the alternative is adding special error handling on each
function exit after prepare until we start conmon which is a lot of work
to do correctly.
Fixes https://issues.redhat.com/browse/RHEL-50746
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
By default we just ignored any localhost reolvers, this is problematic
for anyone with more complicated dns setups, i.e. split dns with
systemd-reolved. To address this we now make use of the build in dns
proxy in pasta. As such we need to set the default nameserver ip now.
A second change is the option to exclude certain ips when generating the
host.containers.internal ip. With that we no longer set it to the same
ip as is used in the netns. The fix is not perfect as it could mean on a
system with a single ip we no longer add the entry, however given the
previous entry was incorrect anyway this seems like the better behavior.
Fixes#22044
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Right now, we always use a private UTS namespace on FreeBSD. This should
be made optional but implementing that cleanly needs a FreeBSD extension
to the OCI runtime config. The process for that is starting
(https://github.com/opencontainers/tob/pull/133) but in the meantime,
assume that the UTS namespace is private on FreeBSD.
This moves the Linux-specific namespace logic to
container_internal_linux.go and adds a FreeBSD stub.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
In FreeBSD-14.0, it is possible to configure a jail's network settings
from outside the jail using ifconfig and route's new '-j' option. This
removes the need for a separate jail to own the container's vnet.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
I don't really like this solution because it can't be undone by
`--security-opt unmask=all` but I don't see another way to make
this retroactive. We can potentially change things up to do this
the right way with 5.0 (actually have it in the list of masked
paths, as opposed to adding at spec finalization as now).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This changes /run to /var/run for .containerenv and secrets in FreeBSD
containers for consistency with FreeBSD path conventions. Running Linux
containers on FreeBSD hosts continue to use /run for compatibility.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This shares code with 'container top' which runs ps on the host,
filtering for the containers that are part of the pod.
(*Container).jailName is modified to take into account the possiblity
that the container is in a pod - this also fixes stats reporting for
pods on FreeBSD.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This file has not been present in BSD systems since 2.9.1 BSD and as far
as I remember /proc/mounts has never existed on BSD systems.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Most of the code moved there so if from there and remove it here.
Some extra changes are required here. This is a bit of a mess. The pipe
handling makes this a bit more difficult.
[NO NEW TESTS NEEDED] This is just a rework, existing tests must pass.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a function to securely mount a subpath inside a volume. We cannot
trust that the subpath is safe since it is beneath a volume that could
be controlled by a separate container. To avoid TOCTOU races between
when we check the subpath and when the OCI runtime mounts it, we open
the subpath, validate it, bind mount to a temporary directory and use
it instead of the original path.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This should simplify the db logic. We no longer need a extra db bucket
for the netns, it is still supported in read only mode for backwards
compat. The old version required us to always open the netns before we
could attach it to the container state struct which caused problem in
some cases were the netns was no longer valid.
Now we use the netns as string throughout the code, this allow us to
only open it when needed reducing possible errors.
[NO NEW TESTS NEEDED] Existing tests should cover it and it is only a
flake so hard to reproduce the error.
Fixes#16140
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since mountStorage and createNetNS run in parallel, the directory file
descriptors used by mountStorage were (rarely) propagated to the CNI
plugins. On FreeBSD, the CNI bridge plugin needs to make changes to the
network jail. This fails if there are any descriptors to open directories
to protect against host directories being visible to the jail's chroot.
Adding O_CLOEXEC to the unix.Open call in openDirectory ensures that these
descriptors are not visible to podman's child processes.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Some error reporting logic got lost from (*Container).prepare during the
port. This adds the missing logic, similar to the Linux version.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This allows us to add a simple stub for FreeBSD which returns -1,
leading WaitForExit to fall back to the sleep loop approach.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This uses a jail to manage the container's network. Container jails for
all containers in a pod are nested within this and share the network
resources.
There is some code in networking_freebsd.go which is common with
networking_linux.go. Subsequent commits will move the shared code to
networking_common.go to reduce this duplication.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This replaces the NetworkJail string field with a struct pointer named
NetNS. This does not try to emulate the complete NetNS interface but does
help to re-use code that just refers to c.state.NetNS.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This adds a new per-platform method makePlatformBindMounts and moves the
/etc/hostname mount. This file is only needed on Linux.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It turns out that field names in syscall.Stat_t are platform-specific.
An alternative to this could change fixVolumePermissions to use
unix.Lstat since unix.Stat_t uses the same mmember name for Atim on both
Linux and FreeBSD.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This contains a lot of code in common with container_internal_linux.go.
Subsequent commits will move the shared code to
container_internal_common.go to reduce the duplication.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
