The --trace has helped in early stages analyze Podman code. However,
it's contributing to dependency and binary bloat. The standard go
tooling can also help in profiling, so let's turn `--trace` into a NOP.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
prune a dependency that was only being used for a simple struct. Should
correct checksum issue on tarballs
[NO TESTS NEEDED]
Fixes: #9355
Signed-off-by: baude <bbaude@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an API to libpod to resolve a path on the container. We can
refactor the code that was originally written for copy. Other
functions are requiring a proper path resolution, so libpod seems
like a reasonable home for sharing that code.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman defers stopping the container to the runtime, which can take some
time. Keeping the lock while waiting for the runtime to complete the
stop procedure, prevents other commands from acquiring the lock as shown
in #8501.
To improve the user experience, release the lock before invoking the
runtime, and re-acquire the lock when the runtime is finished. Also
introduce an intermediate "stopping" to properly distinguish from
"stopped" containers etc.
Fixes: #8501
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When migrating a container with associated volumes, the content of
these volumes should be made available on the destination machine.
This patch enables container checkpoint/restore with named volumes
by including the content of volumes in checkpoint file. On restore,
volumes associated with container are created and their content is
restored.
The --ignore-volumes option is introduced to disable this feature.
Example:
# podman container checkpoint --export checkpoint.tar.gz <container>
The content of all volumes associated with the container are included
in `checkpoint.tar.gz`
# podman container checkpoint --export checkpoint.tar.gz --ignore-volumes <container>
The content of volumes is not included in `checkpoint.tar.gz`. This is
useful, for example, when the checkpoint/restore is performed on the
same machine.
# podman container restore --import checkpoint.tar.gz
The associated volumes will be created and their content will be
restored. Podman will exit with an error if volumes with the same
name already exist on the system or the content of volumes is not
included in checkpoint.tar.gz
# podman container restore --ignore-volumes --import checkpoint.tar.gz
Volumes associated with container must already exist. Podman will not
create them or restore their content.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
This adds a new command, 'podman network reload', to reload the
networks of existing containers, forcing recreation of firewall
rules after e.g. `firewall-cmd --reload` wipes them out.
Under the hood, this works by calling CNI to tear down the
existing network, then recreate it using identical settings. We
request that CNI preserve the old IP and MAC address in most
cases (where the container only had 1 IP/MAC), but there will be
some downtime inherent to the teardown/bring-up approach. The
architecture of CNI doesn't really make doing this without
downtime easy (or maybe even possible...).
At present, this only works for root Podman, and only locally.
I don't think there is much of a point to adding remote support
(this is very much a local debugging command), but I think adding
rootless support (to kill/recreate slirp4netns) could be
valuable.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We only use this channel in terminal attach, and it was not a
buffered channel originally, so it would block on trying to send
unless a receiver was ready. In the non-terminal case, there was
no receiver, so attach blocked forever. Buffer the channel for a
single bool so that it will never block, even if unused.
Fixes#8154
Signed-off-by: Matthew Heon <mheon@redhat.com>
Basically, we want to force the application in the container to
(iff the container was made with a terminal) redraw said terminal
immediately after an attach completes, so the fresh Attach
session will be able to see what's going on (e.g. will have a
shell prompt). Our current attach functions are unfortunately
geared more towards `podman run` than `podman attach` and will
start forwarding resize events *immediately* instead of waiting
until the attach session is alive (much safer for short-lived
`podman run` sessions, but broken for the `podman attach` case).
To avoid a major rewrite, let's just manually send a SIGWINCH
after attach succeeds to force a redraw.
Fixes#6253
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Our previous flow was to perform a hijack before passing a
connection into Libpod, and then Libpod would attach to the
container's attach socket and begin forwarding traffic.
A problem emerges: we write the attach header as soon as the
attach complete. As soon as we write the header, the client
assumes that all is ready, and sends a Start request. This Start
may be processed *before* we successfully finish attaching,
causing us to lose output.
The solution is to handle hijacking inside Libpod. Unfortunately,
this requires a downright extensive refactor of the Attach and
HTTP Exec StartAndAttach code. I think the result is an
improvement in some places (a lot more errors will be handled
with a proper HTTP error code, before the hijack occurs) but
other parts, like the relocation of printing container logs, are
just *bad*. Still, we need this fixed now to get CI back into
good shape...
Fixes#7195
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
A few major fixes here:
- Support for attaching to Configured containers, to match Docker
behavior.
- Support for stream parameter has been improved (we now properly
handle cases where it is not set).
- Initial support for logs parameter has been added.
- Setting attach streams when the container has a terminal is now
supported.
- Errors are properly reported once the hijack has begun.
Signed-off-by: Matthew Heon <mheon@redhat.com>
add the ability to attach to a running container. the tunnel side of this is not enabled yet as we have work on the endpoints and plumbing to do yet.
add the ability to exec a command in a running container. the tunnel side is also being deferred for same reason.
Signed-off-by: Brent Baude <bbaude@redhat.com>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This reverts commit 4b72f9e4013411208751df2a92ab9f322d4da5b2.
Continues what began with revert of
d3d97a25e8c87cf741b2e24ac01ef84962137106 in previous commit.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This reverts commit d3d97a25e8c87cf741b2e24ac01ef84962137106.
This does not resolve the issues we expected it would, and has
some unexpected side effects with the upcoming exec rework.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This reverts commit 4632b81c81a73025a960e339f40bc805f8a6c70a.
We are reverting #5373 as well, which lays the foundation for
this commit, so it has to go as well.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
this is a cosmetic change that makes sure podman returns a sane error code when conmon dies underneath it
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Before, we were using -1 as a bogus value in podman to signify something went wrong when reading from a conmon pipe. However, conmon uses negative values to indicate the runtime failed, and return the runtime's exit code.
instead, we should use a bogus value that is actually bogus. Define that value in the define package as MinInt32 (-1<< 31 - 1), which is outside of the range of possible pids (-1 << 31)
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Before, we were getting the exit code from the file, in which we waited an arbitrary amount of time (5 seconds) for the file, and segfaulted if we didn't find it. instead, we should be a bit more certain conmon has sent the exit code. Luckily, it sends the exit code along the sync pipe fd, so we can read it from there
Adapt the ExecContainer interface to pass along a channel to get the pid and exit code from conmon, to be able to read both from the pipe
Signed-off-by: Peter Hunt <pehunt@redhat.com>
This patch allows users to specify the list of capabilities required
to run their container image.
Setting a image/container label "io.containers.capabilities=setuid,setgid"
tells podman that the contained image should work fine with just these two
capabilties, instead of running with the default capabilities, podman will
launch the container with just these capabilties.
If the user or image specified capabilities that are not in the default set,
the container will print an error message and will continue to run with the
default capabilities.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This corrects a regression from Podman 1.4.x where container exec
sessions inherited supplemental groups from the container, iff
the exec session did not specify a user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add pkg/capabibilities to deal with capabilities. The code has been
copied from Docker (and attributed with the copyright) but changed
significantly to only do what we really need. The code has also been
simplified and will perform better due to removed redundancy.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The new APIv2 branch provides an HTTP-based remote API to Podman.
The requirements of this are, unfortunately, incompatible with
the existing Attach API. For non-terminal attach, we need append
a header to what was copied from the container, to multiplex
STDOUT and STDERR; to do this with the old API, we'd need to copy
into an intermediate buffer first, to handle the headers.
To avoid this, provide a new API to handle all aspects of
terminal and non-terminal attach, including closing the hijacked
HTTP connection. This might be a bit too specific, but for now,
it seems to be the simplest approach.
At the same time, add a Resize endpoint. This needs to be a
separate endpoint, so our existing channel approach does not work
here.
I wanted to rework the rest of attach at the same time (some
parts of it, particularly how we start the Attach session and how
we do resizing, are (in my opinion) handled much better here.
That may still be on the table, but I wanted to avoid breaking
existing APIs in this already massive change.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When a container is in a PID namespace, it is enought to send
the stop signal to the PID 1 of the namespace, only send signals
to all processes in the container when the container is not in
a pid namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We currently rely on exec sessions being removed from the state
by the Exec() API itself, on detecting the session stopping. This
is not a reliable method, though. The Podman frontend for exec
could be killed before the session ended, or another Podman
process could be holding the lock and prevent update (most
notable in `run --rm`, when a container with an active exec
session is stopped).
To resolve this, add a function to reap active exec sessions from
the state, and use it on cleanup (to clear sessions after the
container stops) and remove (to do the same when --rm is passed).
This is a bit more complicated than it ought to be because Kata
and company exist, and we can't guarantee the exec session has a
PID on the host, so we have to plumb this through to the OCI
runtime.
Fixes#4666
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When Libpod removes a container, there is the possibility that
removal will not fully succeed. The most notable problems are
storage issues, where the container cannot be removed from
c/storage.
When this occurs, we were faced with a choice. We can keep the
container in the state, appearing in `podman ps` and available for
other API operations, but likely unable to do any of them as it's
been partially removed. Or we can remove it very early and clean
up after it's already gone. We have, until now, used the second
approach.
The problem that arises is intermittent problems removing
storage. We end up removing a container, failing to remove its
storage, and ending up with a container permanently stuck in
c/storage that we can't remove with the normal Podman CLI, can't
use the name of, and generally can't interact with. A notable
cause is when Podman is hit by a SIGKILL midway through removal,
which can consistently cause `podman rm` to fail to remove
storage.
We now add a new state for containers that are in the process of
being removed, ContainerStateRemoving. We set this at the
beginning of the removal process. It notifies Podman that the
container cannot be used anymore, but preserves it in the DB
until it is fully removed. This will allow Remove to be run on
these containers again, which should successfully remove storage
if it fails.
Fixes#3906
Signed-off-by: Matthew Heon <mheon@redhat.com>
There were many situations that made exec act funky with input. pipes didn't work as expected, as well as sending input before the shell opened.
Thinking about it, it seemed as though the issues were because of how os.Stdin buffers (it doesn't). Dropping this input had some weird consequences.
Instead, read from os.Stdin as bufio.Reader, allowing the input to buffer before passing it to the container.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
We have a lot of checks for container state scattered throughout
libpod. Many of these need to ensure the container is in one of a
given set of states so an operation may safely proceed.
Previously there was no set way of doing this, so we'd use unique
boolean logic for each one. Introduce a helper to standardize
state checks.
Note that this is only intended to replace checks for multiple
states. A simple check for one state (ContainerStateRunning, for
example) should remain a straight equality, and not use this new
helper.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When a container is created with a given OCI runtime, but then it
is uninstalled or removed from the configuration file, Libpod
presently reacts very poorly. The EvictContainer code can
potentially remove these containers, but we still can't see them
in `podman ps` (aside from the massive logrus.Errorf messages
they create).
Providing a minimal OCI runtime implementation for missing
runtimes allows us to behave better. We'll be able to retrieve
containers from the database, though we still pop up an error for
each missing runtime. For containers which are stopped, we can
remove them as normal.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This change matches what is happening on the podman local side
and should eliminate a race condition.
Also exit commands on the server side should start to return to client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We have leaked the exit number codess all over the code, this patch
removes the numbers to constants.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
