Improve the error message when looking up the exit code of a container.
The state of the container may help us track down #14859 which flakes
rarely and is impossible to reproduce on my machine.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Most network commands/features work with both netavark and CNI. When
we added added netavark most docs were not vetted and thus still use CNI
network, it should just say network.
Fixes#14990
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
...and enable the at-test-time confirmation, the one that
double-checks that if CI requests runc we actually use runc.
This exposed a nasty surprise in our setup: there are steps to
define $OCI_RUNTIME, but that's actually a total fakeout!
OCI_RUNTIME is used only in e2e tests, it has no effect
whatsoever on actual podman itself as invoked via command
line such as in system tests. Solution: use containers.conf
Given how fragile all this runtime stuff is, I've also added
new tests (e2e and system) that will check $CI_DESIRED_RUNTIME.
Image source: https://github.com/containers/automation_images/pull/146
Since we haven't actually been testing with runc, we need
to fix a few tests:
- handle an error-message change (make it work in both crun and runc)
- skip one system test, "survive service stop", that doesn't
work with runc and I don't think we care.
...and skip a bunch, filing issues for each:
- #15013 pod create --share-parent
- #15014 timeout in dd
- #15015 checkpoint tests time out under $CONTAINER
- #15017 networking timeout with registry
- #15018 restore --pod gripes about missing --pod
- #15025 run --uidmap broken
- #15027 pod inspect cgrouppath broken
- ...and a bunch more ("podman pause") that probably don't
even merit filing an issue.
Also, use /dev/urandom in one test (was: /dev/random) because
the test is timing out and /dev/urandom does not block. (But
the test is still timing out anyway, even with this change)
Also, as part of the VM switch we are now using go 1.18 (up
from 1.17) and this broke the gitlab tests. Thanks to @Luap99
for a quick fix.
Also, slight tweak to #15021: include the timeout value, and
reword message so command string is at end.
Also, fixed a misspelling in a test name.
Fixes: #14833
Signed-off-by: Ed Santiago <santiago@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
It was not obvious enough in the scripts how much of a snowflake this
environment is. Fix that with lots of capitalized words and asterisks.
Signed-off-by: Chris Evich <cevich@redhat.com>
The memory both local and in the CI test is converted to 3822. I don't
know why this changed but I want to have this working again. For the
future we should look at a more robust solution.
Fixes#15012
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The same problem again as 4374038cc67405e3f5555b1870d5bb7f6570fa5d.
Also fix the incorrect --format autocompletion struct.
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rename all files to _test.go and rename the package to e2e_test. This
makes the linter less strict about things like dot imports.
Add some unused nolint directives to silence some warnings, these can be
used to find untested options so someone could add tests for them.
Fixes#14996
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman-remote push` has shown absolutely no progress at all. Fix that
by doing essentially the same as the remote-pull code does.
The get-free-out-of-jail-card for backwards compatibility is to let the
`quiet` parameter default to true. Since the --quioet flag wasn't
working before either, older Podman clients do not set it.
Also add regression tests to make sure we won't regress again.
Fixes: #11554Fixes: #14971
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The network backend always has default config in memory so there is no
need to copy it. Also netavark cannot use it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fix some network option parsing logic to use constants.
Always use the isolate option since this is what docker does.
Remove the icc option, this is different from isolate and it is not
implemented.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker uses "bridge" as default network name so some tools expect this
to work with network list or inspect. To fix this we change "bridge" to
the podman default ("podman") name.
Fixes#14983
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Progress bar in JSONMessage is missing compared to docker output both in
pull and push. Additionaly, pull was not using JSONMessage while push
was using the type.
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
By vendoring the fixes from containers/image. Also add a test (thanks
@edsantiago) to make sure we won't regress in the future again.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
do not attempt to lock all containers on pod rm since it can cause
deadlocks when other podman cleanup processes are attempting to lock
the same containers in a different order.
[NO NEW TESTS NEEDED]
Closes: https://github.com/containers/podman/issues/14929
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add support for both creating a secret using yaml and mounting a secret as a volume given a yaml file.
Kubernetes secrets have a different structure than podman and therefore have to be handeled differently.
In this PR, I have introduced the basic usecases of kube secrets with more implementations like env secrets
to come!
resolves#12396
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Podman is using pkg/hooks from c/common and following man page is moved
to c/common
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
PR https://github.com/containers/common/pull/1071 moved `pkg/hooks` to
`c/common` hence remove that from podman and use `pkg/hooks` from
`c/common`
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When running a single podman logs this is not really important since we
will exit when we finish reading the logs. However for the system
service this is very important. Leaking goroutines will cause an
increased memory and CPU ussage over time.
Both the the event and log backend have goroutine leaks with both the
file and journald drivers.
The journald backend has the problem that journal.Wait(IndefiniteWait)
will block until we get a new journald event. So when a client closes
the connection the goroutine would still wait until there is a new
journal entry. To fix this we just wait for a maximum of 5 seconds,
after that we can check if the client connection was closed and exit
correctly in this case.
For the file backend we can fix this by waiting for either the log line
or context cancel at the same time. Currently it would block waiting for
new log lines and only check afterwards if the client closed the
connection and thus hang forever if there are no new log lines.
[NO NEW TESTS NEEDED] I am open to ideas how we can test memory leaks in
CI.
To test manually run a container like this:
`podman run --log-driver $driver --name test -d alpine sh -c 'i=1; while [ "$i" -ne 1000 ]; do echo "line $i"; i=$((i + 1)); done; sleep inf'`
where `$driver` can be either `journald` or `k8s-file`.
Then start the podman system service and use:
`curl -m 1 --output - --unix-socket $XDG_RUNTIME_DIR/podman/podman.sock -v 'http://d/containers/test/logs?follow=1&since=0&stderr=1&stdout=1' &>/dev/null`
to get the logs from the API and then it closes the connection after 1 second.
Now run the curl command several times and check the memory usage of the service.
Fixes#14879
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
podman-remote has a dependency on $(SRCBINDIR), because on
Mac and Windows that's a special dir that may not exist.
But depending on a directory means depending on its mtime,
which changes every time a file in it is updated, which
means running 'make' twice in a row will rebuild podman-remote
for no good reason.
Solution: GNU Make has the concept of "order-only" prerequisites,
precisely for this situation. Use it. Since it's an obscure
feature, document it.
UPDATE: This exposed some nasty duplication wrt podman-remote rules.
Clean those up, and add comments to some confusing sections.
Fixes: #14756
(Also, drive-by edit to remove a stray misdocumented non-option)
Signed-off-by: Ed Santiago <santiago@redhat.com>
