We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The allocated `tmpNetworkStatus` must be allocated with the length 0.
Otherwise append would add new elements to the end of the slice and
not at the beginning of the allocated memory.
This caused inspect to fail since the number of networks did not
matched the number of network statuses.
Fixes#9234
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The mtu default value is currently forced to 65520.
This let the user control it using the config key network_cmd_options,
i.e.: network_cmd_options=["mtu=9000"]
Signed-off-by: bitstrings <pino.silvaggio@gmail.com>
when inspecting a container that is only connected to the default
network, we should populate the default network in the container inspect
information.
Fixes: #6618
Signed-off-by: baude <bbaude@redhat.com>
MH: Small fixes, added another test
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
if a CNI network is added to the container, use the IP address in that
network instead of hard-coding the slirp4netns default.
commit 5e65f0ba30f3fca73f8c207825632afef08378c1 introduced this
regression.
Closes: https://github.com/containers/podman/issues/9065
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
set the source IP to the slirp4netns address instead of 127.0.0.1 when
using rootlesskit.
Closes: https://github.com/containers/podman/issues/5138
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Systemd is now complaining or mentioning /var/run as a legacy directory.
It has been many years where /var/run is a symlink to /run on all
most distributions, make the change to the default.
Partial fix for https://github.com/containers/podman/issues/8369
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Just checking for `rootless.IsRootless()` does not catch all the
cases where slirp4netns is in use - we actually allow it to be
used as root as well. Fortify the conditional here so we don't
fail in the root + slirp case.
Fixes#7883
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds a new command, 'podman network reload', to reload the
networks of existing containers, forcing recreation of firewall
rules after e.g. `firewall-cmd --reload` wipes them out.
Under the hood, this works by calling CNI to tear down the
existing network, then recreate it using identical settings. We
request that CNI preserve the old IP and MAC address in most
cases (where the container only had 1 IP/MAC), but there will be
some downtime inherent to the teardown/bring-up approach. The
architecture of CNI doesn't really make doing this without
downtime easy (or maybe even possible...).
At present, this only works for root Podman, and only locally.
I don't think there is much of a point to adding remote support
(this is very much a local debugging command), but I think adding
rootless support (to kill/recreate slirp4netns) could be
valuable.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
a bug was being caused by the fact that the container network results
were not being updated properly.
given that jhon is on PTO, this PR will replace #8362
Signed-off-by: baude <bbaude@redhat.com>
* Make endpoint compatibile with docker-py network expectations
* Update specgen helper when called from compat endpoint
* Update godoc on types
* Add test for network/container create using docker-py method
* Add syslog logging when DEBUG=1 for tests
Fixes#8361
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This makes things a lot more clear - if we are actually joining a
CNI network, we are guaranteed to get a non-zero length list of
networks.
We do, however, need to know if the network we are joining is the
default network for inspecting containers as it determines how we
populate the response struct. To handle this, add a bool to
indicate that the network listed was the default network, and
only the default network.
Signed-off-by: Matthew Heon <mheon@redhat.com>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The error message reported is overlay complicated and the added test does not
really help the user.
Currently the error looks like:
podman run -p 80:80 fedora echo hello
Error: failed to expose ports via rootlessport: "cannot expose privileged port 80, you might need to add "net.ipv4.ip_unprivileged_port_start=0" (currently 1024) to /etc/sysctl.conf, or choose a larger port number (>= 1024): listen tcp 0.0.0.0:80: bind: permission denied\n"
After this change
./bin/podman run -p 80:80 fedora echo hello
Error: cannot expose privileged port 80, you might need to add "net.ipv4.ip_unprivileged_port_start=0" (currently 1024) to /etc/sysctl.conf, or choose a larger port number (>= 1024): listen tcp 0.0.0.0:80: bind: permission denied
Control chars have been eliminated.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman can now support adding network aliases when running containers
(--network-alias). It requires an updated dnsname plugin as well as an
updated ocicni to work properly.
Signed-off-by: baude <bbaude@redhat.com>
When creating a container in a pod the podname was always set as
the dns entry. This is incorrect when the container is not part
of the pods network namespace. This happend both rootful and
rootless. To fix this check if we are part of the pods network
namespace and if not use the container name as dns entry.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When a container either joins a pod that shares the network
namespace or uses `--net=container:` to share the network
namespace of another container, it does not have its own copy of
the CNI results used to generate `podman inspect` output. As
such, to inspect these containers, we should be going to the
container we share the namespace with for network info.
Fixes#8073
Signed-off-by: Matthew Heon <mheon@redhat.com>
After seeing #7759, I decided to look at the calls in
Podman and Buildah to see if we had issues with strings.Split()
calls where an "=" (equals) sign was in play and we expected
to split on only the first one.
There were only one or two that I found in here that I think
might have been troubling, the remainder are just adding
some extra safety.
I also had another half dozen or so that were checking length
expectations appropriately, those I left alone.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
We were only including the CNI Network fields in the output of
`podman inspect` when the container was not running. It's simple
enough to fix (populate with empty structs, since we can't fill
anything without a CNI response to get IP address assigned, etc).
This is necessary for Docker compatibility.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like
fails, the error message already contains the file name and the
operation that fails, so there is no need to wrap the error with
something like "open %s failed".
While at it
- replace a few places with os.Open, ioutil.ReadAll with
ioutil.ReadFile.
- replace errors.Wrapf with errors.Wrap for cases where there
are no %-style arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Usage:
```
$ podman network create foo
$ podman run -d --name web --hostname web --network foo nginx:alpine
$ podman run --rm --network foo alpine wget -O - http://web.dns.podman
Connecting to web.dns.podman (10.88.4.6:80)
...
<h1>Welcome to nginx!</h1>
...
```
See contrib/rootless-cni-infra for the design.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
This adds support for the --cidr parameter that is supported
by slirp4netns since v0.3.0. This allows the user to change
the ip range that is used for the network inside the container.
Signed-off-by: Adis Hamzić <adis@hamzadis.com>
As of podman 1.8.0, because of commit da7595a, the default approach of providing
port-forwarding in rootless mode has switched (and been hard-coded) to rootlessport,
for the purpose of providing super performance. The side-effect of this switch is
source within the container to the port-forwarded service always appears to originate
from 127.0.0.1 (see issue #5138).
This commit allows a user to specify if they want to revert to the previous approach
of leveraging slirp4netns add_hostfwd() api which, although not as stellar performance,
restores usefulness of seeing incoming traffic origin IP addresses.
The change should be transparent; when not specified, rootlessport will continue to be
used, however if specifying --net slirp4netns:slirplisten the old approach will be used.
Note: the above may imply the restored port-forwarding via slirp4netns is not as
performant as the new rootlessport approach, however the figures shared in the original
commit that introduced rootlessport are as follows:
slirp4netns: 8.3 Gbps,
RootlessKit: 27.3 Gbps,
which are more than sufficient for many use cases where the origin of traffic is more
important than limits that cannot be reached due to bottlenecks elsewhere.
Signed-off-by: Aleks Mariusz <m.k@alek.cx>
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We had a field for this in the inspect data, but it was never
being populated. Because of this, `podman pod inspect` stopped
showing port bindings (and other infra container settings). Add
code to populate the infra container inspect data, and add a test
to ensure we don't regress again.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman containers can specify that they get their network
namespace from another container. This is automatic in pods, but
any container can do it.
The problem is that these containers are not guaranteed to have a
network namespace of their own; it is perfectly valid to join the
network namespace of a --net=host container, and both containers
will end up in the host namespace. The code for obtaining network
stats did not account for this, and could cause segfaults as a
result. Fortunately, the fix is simple - the function we use to
get said stats already performs appropriate checks, so we just
need to recursively call it.
Fixes#5652
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When creating a network we pass down a name which end up in the
K8S_POD_NAME argument to cni plugins. Currently this name is always
filled with the container name, so for pods it is the name of the
infra container, not really what one would expect.
This mess up with the dnsname plugin as it doesn't receive the pod
name in K8S_POD_NAME. To fix this pass the pod name when the container
is part of a pod, otherwise use the container name like before.
Signed-off-by: Alban Bedel <albeu@free.fr>
---
v2: Only call GetPod() when a pod id is set
We previously attempted to work within CNI to do this, without
success. So let's do it manually, instead. We know where the
files should live, so we can remove them ourselves instead. This
solves issues around sudden reboots where containers do not have
time to fully tear themselves down, and leave IP address
allocations which, for various reasons, are not stored in tmpfs
and persist through reboot.
Fixes#5433
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Specifically to get:
https://github.com/containernetworking/cni/pull/735
6f29b0165883b2b52ccd4dcb937162ea4c86927b intercept netplugin std err
But also pulls in some interface name validation and a compatibility
fix for configurations that don't set a CNI version.
Signed-off-by: Dan Williams <dcbw@redhat.com>
