Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when creating a pod with --infra-image and using a untagged image for
the infra-image (none/none), the lookup for the image's name was
creating a panic.
Fixes: #9374
Signed-off-by: baude <bbaude@redhat.com>
When we stop a container we are printing the full id,
this does not match Docker behaviour or the start behavior.
We should be printing the users rawInput when we successfully
stop the container.
Fixes: https://github.com/containers/podman/issues/9386
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman is always chowning the WORKDIR to root:root
This PR will return if the WORKDIR already exists.
Fixes: https://github.com/containers/podman/issues/9387
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The logic in the e2e test for multiple network aliases is indicating the
test should wait for the containerized nginx to be ready. As this may
take some time, the test does an exponential backoff starting at 2050ms.
Fix the logic by removing the `Expect(...)` call during the exponential
backoff. Otherwise, the test errors immediately.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The timestamps of some images must have changed changing the number of
expected filtered images. The test conditions seem fragile but for now
it's more important to get CI back.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
now getCgroupProcess takes the longest path on cgroup v1, instead of
complaining if the paths are different.
This should help when --cgroups=split is used on cgroup v1 and the
process cgroups look like:
$ cat /proc/self/cgroup
11:pids:/user.slice/user-0.slice/session-4.scope
10:blkio:/
9:cpuset:/
8:devices:/user.slice
7:freezer:/
6:memory:/user.slice/user-0.slice/session-4.scope
5:net_cls,net_prio:/
4:hugetlb:/
3:cpu,cpuacct:/
2:perf_event:/
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when printing out json format, we mistakenly changed the Created field
output to be a time.time in a different commit. This allows for
override of the Created field to be a unix ts as type int64.
Fixes: #9315
Signed-off-by: baude <bbaude@redhat.com>
When doing a container inspect on a container with unlimited ulimits,
the value should be -1. But because the OCI spec requires the ulimit
value to be uint64, we were displaying the inspect values as a uint64 as
well. Simple change to display as an int64.
Fixes: #9303
Signed-off-by: baude <bbaude@redhat.com>
The old copy-up implementation was very unhappy with symlinks,
which could cause containers to fail to start for unclear reasons
when a directory we wanted to copy-up contained one. Rewrite to
use the Buildah Copier, which is more recent and should be both
safer and less likely to blow up over links.
At the same time, fix a deadlock in copy-up for volumes requiring
mounting - the Mountpoint() function tried to take the
already-acquired volume lock.
Fixes#6003
Signed-off-by: Matthew Heon <mheon@redhat.com>
Service needs to be restarted in order to read the CONTAINERS_CONF file.
Not resetting this can lead to lots of flakes, since the test will use
whatever the host system has to be set in it's containers.conf.
Fixes: https://github.com/containers/podman/issues/9286
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Do not play with capabilities for privileged containers where all
capabilities will be set implicitly.
Also, avoid the device check when running privileged since all of /dev/*
will be mounted in any case.
Fixes: #8897
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
The c/storage library is subject to TOCTOUs as the central container and
image storage may be shared by many instances of many tools. As shown
in #6510, it's fairly easy to have multiple instances of Podman running
in parallel and yield image-lookup errors when removing them.
The underlying issue is the TOCTOU of removal being split into multiple
stages of first reading the local images and then removing them. Some
images may already have been removed in between the two stages. To make
image removal more robust, handle errors at stage two when a given image
is not present (anymore) in the storage.
Fixes: #6510
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Buildah bud passes a bunch more flags then podman build.
We need to implement hook up all of these flags to get full functionality.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability to prune unused cni networks. filters are not implemented
but included both compat and podman api endpoints.
Fixes :#8673
Signed-off-by: baude <bbaude@redhat.com>
The allocated `tmpNetworkStatus` must be allocated with the length 0.
Otherwise append would add new elements to the end of the slice and
not at the beginning of the allocated memory.
This caused inspect to fail since the number of networks did not
matched the number of network statuses.
Fixes#9234
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The spec of a Kube Container has a `Command` and `Args`. While both are
slices, the `Command` is the counterpart of the entrypoint of a libpod
container. Kube is also happily accepting the arguments to as following
items in the slice but it's cleaner to move those to `Args`.
Fixes: #9211
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when creating a macvlan network, we should honor gateway, subnet, and
mtu as provided by the user.
Fixes: #9167
Signed-off-by: baude <bbaude@redhat.com>
The mtu default value is currently forced to 65520.
This let the user control it using the config key network_cmd_options,
i.e.: network_cmd_options=["mtu=9000"]
Signed-off-by: bitstrings <pino.silvaggio@gmail.com>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
instead of using the --macvlan to indicate that you want to make a
macvlan network, podman network create now honors the driver name of
*macvlan*. Any options to macvlan, like the parent device, should be
specified as a -o option. For example, -o parent=eth0.
the --macvlan option was marked as deprecated in the man page but is
still supported for the duration of 3.0.
Signed-off-by: baude <bbaude@redhat.com>
