Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
By moving a couple of variables from libpod/libpod to libpod/libpod/define
I am able shrink the podman-remote-* executables by another megabyte.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This one was a massive pain to track down.
The original symptom was an error message from rootless Podman
trying to make a container in a pod. I unfortunately did not look
at the error message closely enough to realize that the namespace
in question was the cgroup namespace (the reproducer pod was
explicitly set to only share the network namespace), else this
would have been quite a bit shorter.
I spent considerable effort trying to track down differences
between the inspect output of the two containers, and when that
failed I was forced to resort to diffing the OCI specs. That
finally proved fruitful, and I was able to determine what should
have been obvious all along: the container was joining the cgroup
namespace of the infra container when it really ought not to
have.
From there, I discovered a variable collision in pod config. The
UsePodCgroup variable means "create a parent cgroup for the pod
and join containers in the pod to it". Unfortunately, it is very
similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares
this namespace", so an accessor was accidentally added for it
that indicated the pod shared the cgroup namespace when it really
did not. Once I realized that, it was a quick fix - add a bool to
the pod's configuration to indicate whether the cgroup ns was
shared (distinct from UsePodCgroup) and use that for the
accessor.
Also included are fixes for `podman inspect` and
`podman pod inspect` that fix them to actually display the state
of the cgroup namespace (for container inspect) and what
namespaces are shared (for pod inspect). Either of those would
have made tracking this down considerably quicker.
Fixes#6149
Signed-off-by: Matthew Heon <mheon@redhat.com>
enabled integration tests for volumes. there are two exceptions that still need work because of something not yet implemented.
also, add code to deal with the fact that containers conf appears to set a local volume driver where it used to be simply blank.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Instead of getting mount options from /proc/self/mountinfo, which is
very costly to read/parse (and can even be unreliable), let's use
statfs(2) to figure out the flags we need.
[v2: move getting default options to pkg/util, make it linux-specific]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Also adds some basic tests for these two. More tests are needed
but will have to wait for state to be finished.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add support to auto-update containers running in systemd units as
generated with `podman generate systemd --new`.
`podman auto-update` looks up containers with a specified
"io.containers.autoupdate" label (i.e., the auto-update policy).
If the label is present and set to "image", Podman reaches out to the
corresponding registry to check if the image has been updated. We
consider an image to be updated if the digest in the local storage is
different than the one of the remote image. If an image must be
updated, Podman pulls it down and restarts the container. Note that the
restarting sequence relies on systemd.
At container-creation time, Podman looks up the "PODMAN_SYSTEMD_UNIT"
environment variables and stores it verbatim in the container's label.
This variable is now set by all systemd units generated by
`podman-generate-systemd` and is set to `%n` (i.e., the name of systemd
unit starting the container). This data is then being used in the
auto-update sequence to instruct systemd (via DBUS) to restart the unit
and hence to restart the container.
Note that this implementation of auto-updates relies on systemd and
requires a fully-qualified image reference to be used to create the
container. This enforcement is necessary to know which image to
actually check and pull. If we used an image ID, we would not know
which image to check/pull anymore.
Fixes: #3575
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Until now, we've been validating every part of container
configuration through the With... functions that set the options.
This if fine when we are just validating the options to an
individual function, but things get complicated once we need to
validate conflicts between different options. We don't know the
order in which things were passed, so we need the validation on
both of the potential options that can conflict, resulting in
significant code duplication. To solve this, add a validate()
function for containers, and use this to check whether everything
is in a good state.
We can probably move more into this function (there are other
parts of container creation that also do validation of a sort)
but this is a good start to simplifying our options.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Before Libpod supported named volumes, we approximated image
volumes by bind-mounting in per-container temporary directories.
This was handled by Libpod, and had a corresponding database
entry to enable/disable it.
However, when we enabled named volumes, we completely rewrote the
old implementation; none of the old bind mount implementation
still exists, save one flag in the database. With nothing
remaining to use it, it has no further purpose.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes#2808Fixes#3837Fixes#4432Fixes#4718Fixes#4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds network-related options to the pod in the database. We
are going to add the CLI frontend in further patches.
In short, this should greatly improve the ability of pods to
configure networking, once the CLI parsing is added.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In Podman 1.6.3, we added support for anonymous volumes - fixing
our old, broken support for named volumes that were created with
containers. Unfortunately, this reused the database field we used
for the old implementation, and toggled volume removal on for
`podman run --rm` - so now, we were removing *named* volumes
created with older versions of Podman.
We can't modify these old volumes in the DB, so the next-safest
thing to do is swap to a new field to indicate volumes should be
removed. Problem: Volumes created with 1.6.3 and up until this
lands, even anonymous volumes, will not be removed. However, this
is safer than removing too many volumes, as we were doing before.
Fixes#5009
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it allows to disable cgroups creation only for the conmon process.
A new cgroup is created for the container payload.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
support a custom tag to add to each log for the container.
It is currently supported only by the journald backend.
Closes: https://github.com/containers/libpod/issues/3653
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Store the full command plus arguments of the process the container has
been created with. Expose this data as a `Config.CreateCommand` field
in the container-inspect data as well.
This information can be useful for debugging, as we can find out which
command has created the container, and, if being created via the Podman
CLI, we know exactly with which flags the container has been created
with.
The immediate motivation for this change is to use this information for
`podman-generate-systemd` to generate systemd-service files that allow
for creating new containers (in contrast to only starting existing
ones).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
These only conflict when joining more than one network. We can
still set a single CNI network and set a static IP and/or static
MAC.
Fixes#4500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When Libpod removes a container, there is the possibility that
removal will not fully succeed. The most notable problems are
storage issues, where the container cannot be removed from
c/storage.
When this occurs, we were faced with a choice. We can keep the
container in the state, appearing in `podman ps` and available for
other API operations, but likely unable to do any of them as it's
been partially removed. Or we can remove it very early and clean
up after it's already gone. We have, until now, used the second
approach.
The problem that arises is intermittent problems removing
storage. We end up removing a container, failing to remove its
storage, and ending up with a container permanently stuck in
c/storage that we can't remove with the normal Podman CLI, can't
use the name of, and generally can't interact with. A notable
cause is when Podman is hit by a SIGKILL midway through removal,
which can consistently cause `podman rm` to fail to remove
storage.
We now add a new state for containers that are in the process of
being removed, ContainerStateRemoving. We set this at the
beginning of the removal process. It notifies Podman that the
container cannot be used anymore, but preserves it in the DB
until it is fully removed. This will allow Remove to be run on
these containers again, which should successfully remove storage
if it fails.
Fixes#3906
Signed-off-by: Matthew Heon <mheon@redhat.com>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Everything else is a flag to mount, but "uid" and "gid" are not.
We need to parse them out of "o" and handle them separately.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I mount, say, /usr/bin into my container - I expect to be able
to run the executables in that mount. Unconditionally applying
noexec would be a bad idea.
Before my patches to change mount options and allow exec/dev/suid
being set explicitly, we inferred the mount options from where on
the base system the mount originated, and the options it had
there. Implement the same functionality for the new option
handling.
There's a lot of performance left on the table here, but I don't
know that this is ever going to take enough time to make it worth
optimizing.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Previously, we explicitly set noexec/nosuid/nodev on every mount,
with no ability to disable them. The 'mount' command on Linux
will accept their inverses without complaint, though - 'noexec'
is counteracted by 'exec', 'nosuid' by 'suid', etc. Add support
for passing these options at the command line to disable our
explicit forcing of security options.
This also cleans up mount option handling significantly. We are
still parsing options in more than one place, which isn't good,
but option parsing for bind and tmpfs mounts has been unified.
Fixes: #3819Fixes: #3803
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
Begin to separate the internal structures and frontend for
inspect on volumes. We can't rely on keeping internal data
structures for external presentation - separating presentation
and internal data format is good practice.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
some podman commands do not require the use of a container/image store.
in those cases, it is more effecient to not open the store, because that
results in having to also close the store which can be costly when the
system is under heavy write I/O loads.
Signed-off-by: baude <bbaude@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
