The current implementation of the CNI network interface only loads the
networks on the first call and saves them in a map. This is done to safe
performance and not having to reload all configs every time which will be
costly for many networks.
The problem with this approach is that if a network is created by
another process it will not be picked up by the already running podman
process. This is not a problem for the short lived podman commands but
it is problematic for the podman service.
To make sure we always have the actual networks store the mtime of the
config directory. If it changed since the last read we have to read
again.
Fixes#11828
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
on create, libpod was only creating a new event if the pod had an infra container.
now, pod creation triggers a new pod event with or without infra
Signed-off-by: cdoern <cdoern@redhat.com>
added support for a volumes from container. this flag just required movement of the volumes-from flag declaration
out of the !IsInfra block, and minor modificaions to container_create.go
Signed-off-by: cdoern <cdoern@redhat.com>
This option will setup the containers to not modify their /etc/hosts
file and just use the one from the image.
Fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
...in volume test. Looks like Bodhi gating tests run from a
nonwritable directory. I feel really stupid for not realizing
this when I first tried to fix this bug two weeks ago.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix day-one sloppiness: when I first wrote this framework
it compared strings using 'expr', not '=', to be more
forgiving of extra cruft in output. This was a bad decision.
It means that warnings or additional text are ignored:
is "all is ok, NOT!" "all is ok" <-- this would pass
Solution: tighten up the 'is' check. Use '=' (direct
compare) first. If it fails, look for wild cards ('*')
or character classes ('[') in the expect string. If
so, and only then, use 'expr'. And, thanks to a clever
suggestion from Luap99, include '(using expr)' in the
error message when we do so; this could make it easier
for a developer to understand a string mismatch.
This change exposes a lot of instances in which we weren't
doing proper comparisons. Fix those. Thankfully, there
weren't as many as I'd feared.
Also, and completely unrelated, add '-T' flag to bats
helper, for showing timing results. (I will open this
as a separate PR if requested. I too find it offensive
to jumble together unrelated commits.)
Signed-off-by: Ed Santiago <santiago@redhat.com>
systemd sometimes spits out lines in the wrong order. Deal with it.
This fixes an infrequent flake that I haven't filed because I
didn't understand it well enough. (Hence, this reduces BUGS
but does not reduce BUG COUNT. Sorry!)
Signed-off-by: Ed Santiago <santiago@redhat.com>
When using play kube and generate kube, we need to support if bind
mounts have selinux options. As kubernetes does not support selinux in
this way, we tuck the selinux values into a pod annotation for
generation of the kube yaml. Then on play, we check annotations to see
if a value for the mount exists and apply it.
Fixes BZ #1984081
Signed-off-by: Brent Baude <bbaude@redhat.com>
skip the test "podman selinux: shared context in (some) namespaces" on
cgroupsv1 when running as rootless since the tests requires
--pid=container:.
If the container runtime cannot use cgroupsv1 and the container has no
pid namespace. then it is not possible to correctly terminate the
container. Without a cgroup or a pid namespace, the runtime has no
control on what processes are in the container.
Closes: https://github.com/containers/podman/issues/11785
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
added the option for the user to specify a rate, in bytes, at which they would like to be able
to read from the device being added to the pod. This is the first in a line of pod device options.
WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name
Signed-off-by: cdoern <cdoern@redhat.com>
As we were not updating the pod ID bucket, removing a pod with
containers still in it (including the infra container, which will
always suffer from this) will not properly update the name
registry to remove the name of any renamed containers. This
patch ensures that does not happen - all containers will be fully
removed, even if renamed.
Fixes#11750
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This matches what docker does. Also make sure the net aliases are also
shown when the container is stopped.
docker-compose uses this special alias entry to check if it is already
correctly connected to the network. [1]
Because we do not support static ips on network connect at the moment
calling disconnect && connect will loose the static ip.
Fixes#11748
[1] 0bea52b18d/compose/service.py (L663-L667)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- logs: remove unnecessary sleeps. This saves ~25s.
Unfortunately, journald seems to have some sort of lag,
so we need to keep retrying until we get the 'after' string.
- ps: add placeholder test for once buildah 3544 is fixed
- cp: bulk-kill containers when finished, instead of one by one.
This is a big change and only saves about 8s per run, but hey.
- mount,pause,healthcheck: 'podman stop -t 0' before rm'ing containers.
Easy 50s.
Have I mentioned, lately, that 'podman rm -f' needs a '-t 0' flag?
- play: same, and also 'podman pod stop'. Seems to shave ~20s.
- socket-activation: UGH! Buggy and useless tests! They were
running "sleep 90" containers for no reason whatsoever. I
assume the intention was to run them with "-d", so that's
what I've done here. Also fixed some language. 180 seconds!
(Unrelated: cleanup in 070-build, use $IMAGE, not alpine)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The podman integration tests run in parallel. Because all tests use the
same CNI config dir the podman network prune test will remove networks
which are used by other tests at the moment and thus creating
unexpected flakes.
The solution use an extra cni config dir for the network prune test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following commit ensures we silently return container id on `stop` if
container was never created in OCI runtime.
Following behaviour ensures that we are in parity with docker.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Fixes: https://github.com/containers/podman/issues/11745
[NO TESTS NEEDED] Since this is just a revendor and a one line
change for the revendor
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When performing an image build with play kube, we need to set the
context directory so things like file copies have the correct input
path.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The shell completion should only suggest arguments that work. Using a
image without tag does not work in many cases. Having both the version
with and without tag also forces users to press one key more because
tab completion will always stop at the colon.
Fixes#11673
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman inspect shows the healthcheck status in `.State.Healthcheck`,
docker uses `.State.Health`. To make sure docker scripts work we
should add the `Health` key. Because we do not want to display both keys
by default we only use the new `Health` key. This is a breaking change
for podman users but matches what docker does. To provide some form of
compatibility users can still use `--format {{.State.Healthcheck}}`. IT
is just not shown by default.
Fixes#11645
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The :U flag can be used to change the ownership of source volumes based on
the UID, GID of the container. This is only supported by the --volume option,
this will allow to use --mount option as well.
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
If the command came from the underlying image, then we should
not include it in the generate yaml file.
Fixes: https://github.com/containers/podman/issues/11672
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The health check result is stored in the container state. Since the
state can change or might not even be set we have to retrive the current
state before we try to read the health check result.
Fixes#11687
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
(Sorry, couldn't resist).
CI flakes have been coming down - thank you to everyone who has
been making them a priority.
This leaves a noisy subset that I've just been ignoring for months:
Running: podman ... -p 8080:something
...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use
Sometimes these are one-time errors resolved on 2nd try; sometimes
they fail three times, forcing CI user to hit Rerun. In all cases
they make noise in my flake logs, which costs me time.
My assumption is that this has to do with ginkgo running random
tests in parallel. Since many e2e tests simplemindedly use 8080,
collisions are inevitable.
Solution: simplemindedly replace 8080 with other (also arbitrarily
picked) numbers. This is imperfect -- it requires human developers
to pick a number NNNN and 'grep NNNN test/e2e/*' before adding
new tests, which I am 100% confident ain't gonna happen -- but
it's better than what we have now.
Side note: I considered writing and using a RandomAvailablePort()
helper, but that would still be racy. Plus, it would be a pain
to interpolate strings into so many places. Finally, with this
hand-tooled approach, if/when we _do_ get conflicts on port NNNN,
it should be very easy to grep for NNNN, find the offending tests
that reuse that port, and fix one of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
