Code is not directly reading XDG_RUNTIME_DIR, it is reading a value in
the state that may initially be from XDG_RUNTIME_DIR, but then is
overriden by a value from the boltdb that podman stores some state in.
XDG_RUNTIME_DIR and the RunRoot path may not have the same value, so
complaining about XDG_RUNTIME_DIR here may cause confusion when trying
to debug things.
[NO TESTS NEEDED]
Signed-off-by: Kevin Downey <hiredman@thelastcitadel.com>
Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* systemctl stop podman.service will now return exit code 0
* Update test framework to support JSON boolean and numeric values
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This primarily served to protect us against shutting down the
Libpod runtime while operations (like creating a container) were
happening. However, it was very inconsistently implemented (a lot
of our longer-lived functions, like pulling images, just didn't
implement it at all...) and I'm not sure how much we really care
about this very-specific error case?
Removing it also removes a lot of potential deadlocks, which is
nice.
[NO NEW TESTS NEEDED]
Signed-off-by: Matthew Heon <mheon@redhat.com>
move the check after the cgroup manager is set, so to correctly detect
--cgroup-manager=cgroupfs and do not raise a warning about dbus not
being present.
Closes: https://github.com/containers/podman/issues/12802
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Create a custom writer which logs the netavark output to logrus. This
will log to the syslog when it is enabled.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
To make testing easier we can overwrite the network backend with the
global `--network-backend` option.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
You can change the network backendend in containers.conf supported
values are "cni" and "netavark".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
commit 6b3b0a17c625bdf71b0ec8b783b288886d8e48d7 introduced a check for
the PID file before attempting to move the PID to a new scope.
This is still vulnerable to TOCTOU race condition though, since the
PID file or the PID can be removed/killed after the check was
successful but before it was used.
Closes: https://github.com/containers/podman/issues/12065
[NO NEW TESTS NEEDED] it fixes a CI flake
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The current implementation of the CNI network interface only loads the
networks on the first call and saves them in a map. This is done to safe
performance and not having to reload all configs every time which will be
costly for many networks.
The problem with this approach is that if a network is created by
another process it will not be picked up by the already running podman
process. This is not a problem for the short lived podman commands but
it is problematic for the podman service.
To make sure we always have the actual networks store the mtime of the
config directory. If it changed since the last read we have to read
again.
Fixes#11828
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new function to libpod to directly access the runtime
configuration without creating an expensive deep copy. Further migrate
a number of callers to this new function.
This drops the number of calls to JSONDeepCopy from 4 to 1 in a simple
`podman run --rm -d busybox top`.
Future work: Please note that there are more callers of GetConfig() that
can me migrated to GetConfigNoCopy().
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
make sure the pause process is moved to its own scope as well as what
we do when we join an existing user+mount namespace.
Closes: https://github.com/containers/podman/issues/11560
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The rootless integration tests show the XDG_RUNTIME_DIR warning without
any reasons. Podman runs without problems in these and yet the warning
is shown. I think the problem is that we check the permission before we
create the runroot directory.
[NO TESTS NEEDED]
Fixes#11521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not be exposing the store outside of Libpod. We want to
encapsulate it as an internal implementation detail - there's no
reason functions outside of Libpod should directly be
manipulating container storage. Convert the last use to invoke a
method on Libpod instead, and remove the function.
[NO TESTS NEEDED] as this is just a refactor.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Pull the trigger on the `pkg/registries` package which acted as a proxy
for `c/image/pkg/sysregistriesv2`. Callers should be using the packages
from c/image directly, if needed at all.
Also make use of libimage's SystemContext() method which returns a copy
of a system context, further reducing the risk of unintentionally
altering global data.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman does not need to watch the cni config directory. If a network is
not found in the cache, OCICNI will reload the networks anyway and thus
even podman system service should work as expected.
Also include a change to not mount a "new" /var by default in the
rootless cni ns, instead try to use /var/lib/cni first and then the
parent dir. This allows users to store cni configs under /var/... which
is the case for the CI compose test.
[NO TESTS NEEDED]
Fixes#10686
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Users are complaining about read/only /var/tmp failing
even if TMPDIR=/tmp is set.
This PR Fixes: https://github.com/containers/podman/issues/10698
[NO TESTS NEEDED] No way to test this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I believe moving the conmon probing code to c/common wasn't the best strategy.
Different container engines have different requrements of which conmon version is required
(based on what flags they use).
Signed-off-by: Peter Hunt <pehunt@redhat.com>
We originally added this in the *very early* days of Podman,
before a proper persistent state was written, so we had something
to test with. It was retained after the original SQLite state
(and current BoltDB state) were written so it could be used for
testing Libpod in unit tests with no requirement for on-disk
storage. Well, such unit tests never materialized, and if we were
to write some now the requirement to have a temporary directory
for storing data on disk is not that bad. I can basically
guarantee there are no users of this in the wild because, even if
you managed to figure out how to configure it when we don't
document it, it's completely unusable with Podman since all your
containers and pods will disappear every time Podman exits.
Given all this, and since it's an ongoing maintenance burden I no
longer wish to deal with, let's just remove it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently the debug line shows every runtime up until it finds
the correct one, confusing users on which runtime it is using.
Also move missing OCI runtime from containers/conf down to Debug level
and improved the debug message, to not report error.
[NO TESTS NEEDED] Since this is just debug.
Triggered by https://github.com/containers/podman/issues/4854
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
There was a potential race where two handlers could be added at
the same time. Go Maps are not thread-safe, so that could do
unpleasant things. Add a mutex to keep things safe.
Also, swap the order or Register and Start for the handlers in
Libpod runtime created. As written, there was a small gap between
Start and Register where SIGTERM/SIGINT would be completely
ignored, instead of stopping Podman. Swapping the two closes this
gap.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
