This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes#6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a bug when parsing the `ExposedPorts` of the image that lead to
panics when the field was set. The OCI image spec allows three valid
formats: `tcp/port`, `udp/port` and `port`
Fixes: #6490
Reported-by: @jgallucci32
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented.
Fixes#6448
Signed-off-by: Brent Baude <bbaude@redhat.com>
In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format.
Fixes: #6409
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add copy endpoint inputs and outputs. these endpoints are not implemented yet, nor are any bindings. this allows us to update this later without having to change our api version.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
this is a very basic implementation of build. some of the more advanced options need to be included still as well. i think the endpoints for compat and libpod will have to split given buildahs more advanced set of options. that should probably be done by someone more experienced with build internals.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Update blang/semver to allow ParseTolerant() support
* Provide helper functions for API handlers to obtain client's 'version'
path variable focused on API endpoint tree: libpod vs. compat
* Introduce new errors:
* version not given in path, endpoints may determine if this is a hard
error (ErrVersionNotGiven)
* given version not supported (ErrVersionNotSupported), only a soft
error if the handler is going to hijack the connection
* Added unit tests for version parsing
* bindings check version on connect:
* client <= Server API version connection is continued
* client >= Server API version connection fails
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add support for /exec/{id}/resize
* Add support for ErrSessionNotFound
* Resize container TTY as stdin changes size
* Refactor all resize functions into one handler
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Jhon is working on an alternative version that will combine
container and exec session resize, so we'll wait for that.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
for the remote client, add the ability to attach to a container, start a container, and run a container.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The usual flow for exec is going to be:
- Create exec session
- Start and attach to exec session
- Exec session exits, attach session terminates
- Client does an exec inspect to pick up exit code
The safest point to remove the exec session, without doing any
database changes to track stale sessions, is to remove during the
last part of this - the single inspect after the exec session
exits.
This is definitely different from Docker (which would retain the
exec session for up to 10 minutes after it exits, where we will
immediately discard) but should be close enough to be not
noticeable in regular usage.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is still very early not not well tested, and missing resize
capability, but it does provide the first bits of exec.
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
