The e2e tests already depend on skopeo anyway and pulling a over 300
MB image is not helpful for flakes but most importantly we see ENOSPC
flakes. I see them around the skopeo test so I assume the big image is
pushing the tmpfs limits so other tests running in parallel can start
failing because of it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
the condition doesn't work when the runtime to use is specified
through its absolute path as the error message contains that.
Simplify the check and just look for "read from the init process".
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The command does not react on sigterm, so kube down needs to wait 10s.
To fix it first use a command that does but also write the yaml
directly instead of doing the podman create && kube generate dance.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
use a command that stops on SIGTERM not sleep, that way the tests can
continue to use podman kube down without waiting for the full stop
timeout every time.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This test is by far the slowest one taking over minute, the reason is
that it is checking every single podman command for shell completions.
The test is useful but it does not need to check the "..." argument 3
times. Test a second time to make sure not only the first arg is
completed. This change makes it about 15 seconds faster.
Long term we should get this test out of the main system tests together
with other cli only tests as they do not need to run on each OS, etc...
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The current logic used podman logs I don't understand way, all we care
about is the container output and we can just read the same with a
attached podman run, of course we have to move it into the background
but it did the some with logs.
This also allows us to remove the extra log-driver checks and because
podman logs seems to be much slower than the extra run we safe over 10s
with this change.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use only one retry and a short stop timeout to speed them up. I am not
sure if this will cause flakes, I have not seen any after trying for
some time so I think this works just as well. And is about 2-3 seconds
faster for both tests.
If it does start to flake we can revert this commit again or write the
test differently.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Do not wait 5 seconds, just stop the container directly.
This speeds up the test by more than 4 seconds.
One could make the case here that we want to check podman wait but
there are so many other podman wait tests that it should not matter.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Instead of iterating over all tmp dirs and creating test containers for
each one we can just pass all files to one touch call. With that we have
to create much less containers while still checking the same thing. This
speeds up the test by about 4 seconds.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test used sleep to synchronize log output between both containers
which is slow. There is actually no way to guarantee the ordering on
the reading side so just remove the sleep's and check the the lines
within the same container are in the right order.
Trying to preserve the orignal ordering is just not possible if we speed
up the test as it would flake to often.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no reason for this check to wait 4 seconds for the container to
run, instead make sure to have a running process and then stop it
directly with -t0 not have any delay.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This container did not react to sigterm thus we always waited 10s for it
to stop. Also do not wait 2s for the logs instead use a retry loop.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test does a normal stop on a command that does not react to sigterm.
As I cannot fix the system stop logic use a command which does. This
safes us 10s as it no longer waits for the timeout.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Both tests take 10s longer than they need to because they run the sleep
command int he container which does not react to sigterm, as such podman
waits 10s before killing it with sigkill.
To fix it just stop them with podman rm -fa -t0 to avoid the wait and do
not use podman kube down as we cannot set a timeout there. podman kube
down is still covered in many other tests so this is not an issue.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
IMO it is not important to cover each case with each sdnotify policy, to
speed them up we run all the exit code cases only once just twice for
each policy while switching the sdnotify policy between each case. This
way we safe 50% of runs and should still have sufficient coverage.
Before it took around 24 seconds, with this it is around 12 seconds now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is really no point in waiting 10s for the kill, let's use 2 this
should be good enough to observe the timing.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This test waits 15 seconds to send sigterm for no good reason, we can
just make the timeout shorter. Also make sure the podman command quit on
sigterm by looking for the output message.
While at it fix the tests to use $PODMAN_TMPDIR not /tmp and define the
yaml in the test instead of using the podman create && podman kube
generate && podman rm way to create the yaml as it is a bit slower as we
have to call three podman commands for it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Merge two podman event tests into one to speed them up as they did
mostly the same anyway. This way we only have to do the setup/teardown
once and only run one container.
Second, add the --since option because reading the journal can be slow
if you have thousands of event entries. This is not so critical in CI as
we run on fresh systems but on local dev machines I have almost 100k
events in the journal so parsing all of them makes this test slow (like
30s), with this change I can get it under 1s.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
Defining a timer with a fixed interval is not a good idea as we first
have to wait until the timer triggers, while the interval was every two
seconds it means that we have to wait at least 2s for it to start.
However much worse it means it triggers the unit over and over, this
seems to cause some soft of race with the output check. I have seen
this test run 10-60s which does not make much sense.
Switching the timer to trgger once on start seem to make the test run
consistently in 7s locally for me so this is much better.
There still is the question if we really have to test this at all on
each upstream PR but I left it for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It takes over 10 seconds for this test as it uses --wait 5 twice which
runs into the timeout. IMO this tests is just redundant as it is already
covered in the e2e tests much better. Thus remove it here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When an empty volume is mounted into a container, Docker will
chown that volume appropriately for use in the container. Podman
does this as well, but there are differences in the details. In
Podman, a chown is presently a one-and-done deal; in Docker, it
will continue so long as the volume remains empty. Mount into a
dozen containers, but never add content, the chown occurs every
time. The chown is also linked to copy-up; it will always occur
when a copy-up occurred, despite the volume now not being empty.
This PR changes our logic to (mostly) match Docker's.
For some reason, the chowning also stops if the volume is chowned
to root at any point. This feels like a Docker bug, but as they
say, bug for bug compatible.
In retrospect, using bools for NeedsChown and NeedsCopyUp was a
mistake. Docker isn't actually tracking this stuff; they're just
doing a copy-up and permissions change unconditionally as long as
the volume is empty. They also have the two linked as one
operation, seemingly, despite happening at very different times
during container init. Replicating that in our stateful system is
nontrivial, hence the need for the new CopiedUp field. Basically,
we never want to chown a volume with contents in it, except if
that data is a result of a copy-up that resulted from mounting
into the current container. Tracking who did the copy-up is the
easiest way to do this.
Fixes#22571
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Now WaitForExit returns the exit code as stored in the db instead of
returning an error when the container was removed.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
If a container unit starts on boot with a dependency on `default.target`
the image unit may start too soon, before network is ready. This cause
the unit to fail to pull the image.
- Add a dependency on `network-online.target` to make sure image pulls
don't fail.
See https://github.com/containers/podman/issues/21873
- Document the hardcoded dependency on `network-online.target` for images unit
and explain how it can be overriden if necessary.
- tests/e2e/quadlet: Add `assert-last-key-regex`
Required to test the `After=` override in [Unit] section
See https://github.com/containers/podman/pull/22057#issuecomment-2008959993
- quadlet/unitfile: add a prepenUnitLine method
Requirements on networks should be inserted at the top of the
section so the user can override them.
Signed-off-by: jbtrystram <jbtrystram@redhat.com>
The default_addr shell function in test/system/helpers.network is used to
get the host's default address, which is used in a number of pasta
networking tests. However, in certain circumstances it can incorrectly
pick a deprecated address as the primary address. Correct it to exclude
those.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have to exclude the ips in the rootless netns as they are not the
host. Now that fix only works if there are more than one ip one the
host available, if there is only one we do not set the entry at all
which I consider better as failing to resolve this name is a much better
error for users than connecting to a wrong ip. It also matches what
--network pasta already does.
The test is bit more compilcated as I would like, however it must deal
with both cases one ip, more than one so there is no way around it I
think.
Fixes#22653
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
