When the OCI Runtime tries to set certain settings in cgroups
it can get the error "no such file or directory", the wrapper
ends up reporting a bogus error like:
```
Request Failed(Internal Server Error): open io.max: No such file or directory: OCI runtime command not found error
{"cause":"OCI runtime command not found error","message":"open io.max: No such file or directory: OCI runtime command not found error","response":500}
```
On first reading of this, you would think the OCI Runtime (crun or runc) were not found. But the error is actually reporting
message":"open io.max: No such file or directory
Which is what we want the user to concentrate on.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If you use additional stores and pull the same image into
writable stores, you can end up with the situation where
you have the same image twice. This causes image exists
to return the wrong error. It should return true in this
situation rather then an error.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The `podman ps --all` command will now show containers that
are under the control of other c/storage container systems and
the new `ps --storage` option will show only containers that are
in c/storage but are not controlled by libpod.
In the below examples, the '*working-container' entries were created
by Buildah.
```
podman ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9257ef8c786c docker.io/library/busybox:latest ls /etc 8 hours ago Exited (0) 8 hours ago gifted_jang
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago storage busybox-working-container
7a5a7b099d33 localhost/tom:latest ls -alF 30 hours ago Exited (0) 30 hours ago hopeful_hellman
01d601fca090 localhost/tom:latest ls -alf 30 hours ago Exited (1) 30 hours ago determined_panini
ee58f429ff26 localhost/tom:latest buildah 33 hours ago storage alpine-working-container
podman ps --external
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago external busybox-working-container
ee58f429ff26 localhost/tom:latest buildah 33 hours ago external alpine-working-container
```
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes:
* static IP (v4 and v6)
* static mac
* ports -p (i.e. -p 8080:80)
* exposed ports (i.e. 222-225)
* publish ports from image -P
Signed-off-by: Brent Baude <bbaude@redhat.com>
The define package under Libpod is intended to be an extremely
minimal package, including constants and very little else.
However, as a result of some legacy code, it was dragging in all
of libpod/image (and, less significantly, the util package).
Fortunately, this was just to ensure that error constants were
not duplicating, and there's nothing preventing us from
importing in the other direction and keeping libpod/define free
of dependencies.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The infra/abi code for pods was written in a flawed way, assuming
that the map[string]error containing individual container errors
was only set when the global error for the pod function was nil;
that is not accurate, and we are actually *guaranteed* to set the
global error when any individual container errors. Thus, we'd
never actually include individual container errors, because the
infra code assumed that err being set meant everything failed and
no container operations were attempted.
We were originally setting the cause of the error to something
nonsensical ("container already exists"), so I made a new error
indicating that some containers in the pod failed. We can then
ignore that error when building the report on the pod operation
and actually return errors from individual containers.
Unfortunately, this exposed another weakness of the infra code,
which was discarding the container IDs. Errors from individual
containers are not guaranteed to identify which container they
came from, hence the use of map[string]error in the Pod API
functions. Rather than restructuring the structs we return from
pkg/infra, I just wrapped the returned errors with a message
including the ID of the container.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Throw an error if a specified tag does not exist. Also make sure that
the user input is normalized as we already do for `podman tag`.
To prevent regressions, add a set of end-to-end and systemd tests.
Last but not least, update the docs and add bash completions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the container uses journald logging, we don't want to
automatically use the same driver for its exec sessions. If we do
we will pollute the journal (particularly in the case of
healthchecks) with large amounts of undesired logs. Instead,
force exec sessions logs to file for now; we can add a log-driver
flag later (we'll probably want to add a `podman logs` command
that reads exec session logs at the same time).
As part of this, add support for the new 'none' logs driver in
Conmon. It will be the default log driver for exec sessions, and
can be optionally selected for containers.
Great thanks to Joe Gooch (mrwizard@dok.org) for adding support
to Conmon for a null log driver, and wiring it in here.
Fixes#6555
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This came out of a conversation with Valentin about
systemd-managed Podman. He discovered that unit files did not
properly handle cases where Conmon was dead - the ExecStopPost
`podman rm --force` line was not actually removing the container,
but interestingly, adding a `podman cleanup --rm` line would
remove it. Both of these commands do the same thing (minus the
`podman cleanup --rm` command not force-removing running
containers).
Without a running Conmon instance, the container process is still
running (assuming you killed Conmon with SIGKILL and it had no
chance to kill the container it managed), but you can still kill
the container itself with `podman stop` - Conmon is not involved,
only the OCI Runtime. (`podman rm --force` and `podman stop` use
the same code to kill the container). The problem comes when we
want to get the container's exit code - we expect Conmon to make
us an exit file, which it's obviously not going to do, being
dead. The first `podman rm` would fail because of this, but
importantly, it would (after failing to retrieve the exit code
correctly) set container status to Exited, so that the second
`podman cleanup` process would succeed.
To make sure the first `podman rm --force` succeeds, we need to
catch the case where Conmon is already dead, and instead of
waiting for an exit file that will never come, immediately set
the Stopped state and remove an error that can be caught and
handled.
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Introduced define.ErrImageInUse to assist in determining the exit code
without resorting string searches.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We can easily tell if we're going to deadlock by comparing lock
IDs before actually taking the lock. Add a few checks for this in
common places where deadlocks might occur.
This does not yet cover pod operations, where detection is more
difficult (and costly) due to the number of locks being involved
being higher than 2.
Also, add some error wrapping on the Podman side, so we can tell
people to use `system renumber` when it occurs.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Also, ensure that we don't try to mount them without root - it
appears that it can somehow not error and report that mount was
successful when it clearly did not succeed, which can induce this
case.
We reuse the `--force` flag to indicate that a volume should be
removed even after unmount errors. It seems fairly natural to
expect that --force will remove a volume that is otherwise
presenting problems.
Finally, ignore EINVAL on unmount - if the mount point no longer
exists our job is done.
Fixes: #4247Fixes: #4248
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add ability to evict a container when it becomes unusable. This may
happen when the host setup changes after a container creation, making it
impossible for that container to be used or removed.
Evicting a container is done using the `rm --force` command.
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This includes:
Implement exec -i and fix some typos in description of -i docs
pass failed runtime status to caller
Add resize handling for a terminal connection
Customize exec systemd-cgroup slice
fix healthcheck
fix top
add --detach-keys
Implement podman-remote exec (jhonce)
* Cleanup some orphaned code (jhonce)
adapt remote exec for conmon exec (pehunt)
Fix healthcheck and exec to match docs
Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error
Use these different errors in branching for exit code in healthcheck and exec
Set conmon to use new api version
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Peter Hunt <pehunt@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
