Pull policies in K8s yaml may be capitalized, so lower them before
parsing.
Fixes: bugzilla.redhat.com/show_bug.cgi?id=1985905
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
By proxy by vendoring containers/common. Previously, a "dangling" image
was an untagged image; just a described in the Docker docs. The
definition of dangling has now been refined to an untagged image without
children to be compatible with Docker.
Further update a redundant image-prune test.
Fixes: #10998Fixes: #10832
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
compat containers/logs was missing actual usage of until query param.
This led me to implement the until param for libpod's container logs as well. Added e2e tests.
Signed-off-by: cdoern <cdoern@redhat.com>
As a conclusion of a discussion in #10861, until filter is added
by this commit to volume ls filters.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Followup to #10932: add a validation check to prevent introduction
of new 'Expect(foo.ExitCode()).To(...)' patterns. If such use is
absolutely necessary -- there is one such instance in the code
already -- require that the assertion include a description.
Also: clean up instances that were introduced since the merging
of #10932.
Also: fix one remaining instance in run_exit_test.go: it had
a FIXME comment mentioning a race condition, but unfortunately
there was no issue or bug ID, hence no way to know if the race
is fixed or not. We will assume it is.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that containers configured for auto removal
(e.g., via `podman create --rm`) are removed in `podman start`
if starting the container failed.
Fixes: #10935
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
When optional information such as container IDs and names in pods, the
headers are not displayed. This fix restored the headers.
Documentation of this subcommand is also updated.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
First, make podman diff accept optionally a second argument. This allows
the user to specify a second image/container to compare the first with.
If it is not set the parent layer will be used as before.
Second, podman container diff should only use containers and podman
image diff should only use images. Previously, podman container diff
would use the image when both an image and container with this name
exists.
To make this work two new parameters have been added to the api. If they
are not used the previous behaviour is used. The same applies to the
bindings.
Fixes#10649
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
feat: read secret config from config file if the user hasn't entered
explicit config values
feat: allow to specify `--driver-opts opt1=val1,opt2=val2` in the secret
create command to allow overriding the default values
fix: show driver options in `podman secret inspect`
Signed-off-by: Tino Rusch <tino.rusch@gmail.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
added Avg Cpu calculation and CPU up time to podman stats. Adding different feature sets in different PRs, CPU first.
resolves#9258
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Refactor podman commands that have drifted from using
c/common report pkg. Report pkg is needed to implement
go template functions.
Removed obsolete code from podman which exists in c/common.
Latest template library added default newlines and method to
remove them. Incorporated needed changes in c/common PR below.
Depends on https://github.com/containers/common/pull/624
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1855983
Signed-off-by: Jhon Honce <jhonce@redhat.com>
runc-1.0-rc95 refuses destination paths that are not absolute.
The test was causing a mount with a destination "[/etc/foo]" causing
the OCI runtime to fail.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman uses the volume option map to check if it has to mount the volume
or not when the container is started. Commit 28138dafcc added to uid
and gid options to this map, however when only uid/gid is set we cannot
mount this volume because there is no filesystem or device specified.
Make sure we do not try to mount the volume when only the uid/gid option
is set since this is a simple chown operation.
Also when a uid/gid is explicity set, do not chown the volume based on
the container user when the volume is used for the first time.
Fixes#10620
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fix a race in the k8s-file logs driver. When "following" the logs,
Podman will print the container's logs until the end. Previously,
Podman logged until the state transitioned into something non-running
which opened up a race with the container still running, possibly in
the "stopping" state.
To fix the race, log until we've seen the wait event for the specific
container. In that case, conmon will have finished writing all logs to
the file, and Podman will read it until EOF.
Further tweak the integration tests for testing `logs -f` on a running
container. Previously, the test only checked for one of two lines
stating that there was a race. Indeed the race was in using `run --rm`
where a log file may be removed before we could fully read it.
Fixes: #10596
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Image prune --filter is fully implemented in the api, http api
yet not connected with the cli execution. User trying to use
filters does not see the effect. This commit adds glue code to enable
possiblity of using --filter in prune in the cli execution.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Certain event meta data was lost when converting the remote events to
libpod events and vice versa. Enable the skipped system tests for
remote.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
