Renamed podman pod stats test specs to distinguish them from podman stats tests.
podman stats tests where disabled by a +build flag.
Fix podman stats format test, add negative test.
Fix podman stats cli command, exit non-zero on invalid format string.
Add tests for podman stats interval flag.
Signed-off-by: Thomas Weber <towe75@googlemail.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
implement remote API for --all and --ignore flags for podman stop
implement remote API for --all flags for podman stop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
I found several problems with container remove
podman-remote rm --all
Was not handled
podman-remote rm --ignore
Was not handled
Return better errors when attempting to remove an --external container.
Currently we return the container does not exists, as opposed to container
is an external container that is being used.
This patch also consolidates the tunnel code to use the same code for
removing the container, as the local API, removing duplication of code
and potential problems.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It turns out an options was added to container exists so it makes sense
to have pods and container exists calls have an optional structure for
options.
Signed-off-by: baude <bbaude@redhat.com>
This change adds code to report the reclaimed space after a prune.
Reclaimed space from volumes, images, and containers is recorded
during the prune call in a PruneReport struct. These structs are
collected into a slice during a system prune and processed afterwards
to calculate the total reclaimed space.
Closes#8658
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
External containers are containers created outside of Podman.
For example Buildah and CRI-O Containers.
$ buildah from alpine
alpine-working-container
$ buildah run alpine-working-container touch /test
$ podman container exists --external alpine-working-container
$ podman container diff alpine-working-container
C /etc
A /test
Added --external flag to refer to external containers, rather then --storage.
Added --external for podman container exists and modified podman ps to use
--external rather then --storage. It was felt that --storage would confuse
the user into thinking about changing the storage driver or options.
--storage is still supported through the use of aliases.
Finally podman contianer diff, does not require the --external flag, since it
there is little change of users making the mistake, and would just be a pain
for the user to remember the flag.
podman container exists --external is required because it could fool scripts
that rely on the existance of a Podman container, and there is a potential
for a partial deletion of a container, which could mess up existing users.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new endpoint for container stats allowing for batch operations on
more than one container. The new endpoint deprecates the
single-container endpoint which will eventually be removed with the next
major release.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Our previous flow was to perform a hijack before passing a
connection into Libpod, and then Libpod would attach to the
container's attach socket and begin forwarding traffic.
A problem emerges: we write the attach header as soon as the
attach complete. As soon as we write the header, the client
assumes that all is ready, and sends a Start request. This Start
may be processed *before* we successfully finish attaching,
causing us to lose output.
The solution is to handle hijacking inside Libpod. Unfortunately,
this requires a downright extensive refactor of the Attach and
HTTP Exec StartAndAttach code. I think the result is an
improvement in some places (a lot more errors will be handled
with a proper HTTP error code, before the hijack occurs) but
other parts, like the relocation of printing container logs, are
just *bad*. Still, we need this fixed now to get CI back into
good shape...
Fixes#7195
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
the go binding for remove container was using 'vols' for a key to remove volumes associated to the container. the correct key should be "v" and is documented as such.
Fixes: #7128
Signed-off-by: Brent Baude <bbaude@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add support for /exec/{id}/resize
* Add support for ErrSessionNotFound
* Resize container TTY as stdin changes size
* Refactor all resize functions into one handler
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Change function call to use readers/writers in place channels
* Support stdin for pushing data from client to container
* Add bindings test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Adds ability to prune containers for v2.
Adds client side prompt with force flag and filters options to prune.
Signed-off-by: Sujil02 <sushah@redhat.com>
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
adding more image tests for go bindings. one big change is that the params were converted from map[string]string to url.values to account for the ability to send []string as query params
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Make context keys package safe
* Add support for PODMAN_HOST and PODMAN_SSHKEY
* Add slight increasing delay when client connections fail
* Remove usages of path.Join(), added JoinURL(). '/' is not OS
dependent.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
container filters were being double encoded (maybe triple) which resulted in the wrong encoding representation of filters being sent by the go-bindings. Also, on the server side, Filter needed to be changed to Filter to decode properly. Finally, due to the changed return type of List Containers, the go bindings return values needed to be changed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add binding for networks and begin documentation for binding methods for godoc. Also, add major functions to their own subpackages so reduce the amount of of method confusion. So instead of: bindings.ListImages(), we now do a [bindings].images.List().
Also, the connection is passed to each binding method via a context to allow for future growth.
Lastly, add first set of tests. There are a couple of things to work out for rootless tests yet.
Signed-off-by: Brent Baude <bbaude@redhat.com>
