Currently if you attempt to create a kube.yaml file off of a non running
container where the container runs as a specific User, the creation
fails because the storage container is not mounted. Podman is supposed to
read the /etc/passwd entry inside of the container but since the
container is not mounted, the c.State.Mountpoint == "". Podman
incorrectly attempts to read /etc/passwd on the host, and fails if the
specified user is not in the hosts /etc/passwd.
This PR mounts the storage container, if it was not mounted so the read
succeeds.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --trace has helped in early stages analyze Podman code. However,
it's contributing to dependency and binary bloat. The standard go
tooling can also help in profiling, so let's turn `--trace` into a NOP.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Unlocking an already unlocked lock is a panic. As such, we have
to make sure that the deferred c.lock.Unlock() in
c.StopWithTimeout() always runs on a locked container. There was
a case in c.stop() where we could return an error after we unlock
the container to stop it, but before we re-lock it - thus
allowing for a double-unlock to occur. Fix the error return to
not happen until after the lock has been re-acquired.
Fixes#9615
Signed-off-by: Matthew Heon <mheon@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to pass the cni interface descriptions to cni teardowns.
Otherwise cni cannot find the correct cache files because the
interface name might not match the networks. This can only happen
when network disconnect was used.
Fixes#9602
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Server, bindings, and CLI all now pull version information from version
package.
* Current /libpod API version slaved to podman/libpod Version
* Bindings validate against libpod API Minimal version
* Remove pkg/bindings/bindings.go and updated tests
Fixes: #9207
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Fixes: https://github.com/containers/podman/issues/9582
This PR also adds tests to make sure SELinux labels match the runtime,
or if init is specified works with the correct label.
Add tests for selinux kvm/init labels
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some log tests were duplicated, and some didn't need to be repeated for
every driver. Also, added some comments
Signed-off-by: Ashley Cui <acui@redhat.com>
Move the core of renaming logic into the DB. This guarantees a
lot more atomicity than we have right now (our current solution,
removing the container from the DB and re-creating it, is *VERY*
not atomic and prone to leaving a corrupted state behind if
things go wrong. Moving things into the DB allows us to remove
most, but not all, of this - there's still a potential scenario
where the c/storage rename fails but the Podman rename succeeds,
and we end up with a mismatched state.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
To be able to reuse common checkpoint/restore functions this commit
moves code to pkg/checkpoint/crutils.
This commit has not functional changes. It only moves code around.
[NO TESTS NEEDED] - only moving code around
Signed-off-by: Adrian Reber <areber@redhat.com>
The storage can easily be corrupted when a build or pull process (or any
process *writing* to the storage) has been killed. The corruption
surfaces in Podman reporting that a given layer could not be found in
the layer tree. Those errors must not be fatal but only logged, such
that the image removal may continue. Otherwise, a user may be unable to
remove an image.
[NO TESTS NEEDED] as I do not yet have a reliable way to cause such a
storage corruption.
Reported-in: https://github.com/containers/podman/issues/8148#issuecomment-787598940
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
prune a dependency that was only being used for a simple struct. Should
correct checksum issue on tarballs
[NO TESTS NEEDED]
Fixes: #9355
Signed-off-by: baude <bbaude@redhat.com>
Only the the network mode bridge supports cni networks.
Other network modes cannot use network connect/disconnect
so we should throw a error.
Fixes#9496
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The order of CapAdd when inspecting containers is deterministic.
However, the order of CapDrop is not (for unclear reasons). Add a
quick sort on the final array to guarantee a consistent order.
Fixes#9490
Signed-off-by: Matthew Heon <mheon@redhat.com>
Since commit d54478d8ea, a container's lock is released before
attempting to stop it via the OCI runtime. This opened the window
for various kinds of race conditions. One of them led to #9479 where
the removal+cleanup sequences of a `run --rm` session overlapped with
`rm -af`. Make both execution paths more robust by handling the case of
an already removed container.
Fixes: #9479
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The libpod network logic knows about networks IDs but OCICNI
does not. We cannot pass the network ID to OCICNI. Instead we
need to make sure we only use network names internally. This
is also important for libpod since we also only store the
network names in the state. If we would add a ID there the
same networks could accidentally be added twice.
Fixes#9451
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Instead of using the container's mountpoint as the base of the
chroot and indexing from there by the volume directory, instead
use the full path of what we want to copy as the base of the
chroot and copy everything in it. This resolves the bug, ends up
being a bit simpler code-wise (no string concatenation, as we
already have the full path calculated for other checks), and
seems more understandable than trying to resolve things on the
destination side of the copy-up.
Fixes#9354
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This one is rather bizarre because it triggers only on some
systems. I've included a CI test, for example, but I'm 99% sure
we use images in CI that have volumes over empty directories, and
the earlier patch to change copy-up implementation passed CI
without complaint.
I can reproduce this on a stock F33 VM, but that's the only place
I have been able to see it.
Regardless, the issue: under certain as-yet-unidentified
environmental conditions, the copier.Get method will return an
ENOENT attempting to stream a directory that is empty. Work
around this by avoiding the copy altogether in this case.
Signed-off-by: Matthew Heon <mheon@redhat.com>
when creating a pod with --infra-image and using a untagged image for
the infra-image (none/none), the lookup for the image's name was
creating a panic.
Fixes: #9374
Signed-off-by: baude <bbaude@redhat.com>
Make sure that Podman's default OCI runtime is passed to Buildah in
`podman build`. In theory, Podman and Buildah should use the same
defaults but the projects move at different speeds and it turns out
we caused a regression in v3.0.
Fixes: #9365
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
