We bind ports to ensure there are no conflicts and we leak them into
conmon to keep them open. However we bound the ports after the network
was set up so it was possible for a second network setup to overwrite
the firewall configs of a previous container as it failed only later
when binding the port. As such we must ensure we bind before the network
is set up.
This is not so simple because we still have to take care of
PostConfigureNetNS bool in which case the network set up happens after
we launch conmon. Thus we end up with two different conditions.
Also it is possible that we "leak" the ports that are set on the
container until the garbage collector will close them. This is not
perfect but the alternative is adding special error handling on each
function exit after prepare until we start conmon which is a lot of work
to do correctly.
Fixes https://issues.redhat.com/browse/RHEL-50746
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: e62c928642 ("Make podman-compose refer to podman-compose(1) when using an external provider")
- test: add coverage for PODMAN_COMPOSE_WARNING_LOGS
Signed-off-by: Petter Mikkelsen <43xhyr9m@anonaddy.me>
I broke the kube external storage test in the course of my
safename PR: _write_test_yaml() with no command generated
a pod that did not trigger the conditions required for
this test.
Solution: run a container (top). Add new checks to prevent
this gap from happening again.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The value of the pointer might be changed while creating the container
causing unexpected side effects.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These test steps check the automount feature with multi images for
following item:
1. multi images can be auotmounted with yaml file.
2. if there are same path exist in the images, the last one
should trumps.
3. the volume is mounted readonly in the container.
4. the volumes are only mounted in the specific container, but
not the whole pods.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
validate that a "podman generate" and "podman play" cycle restores the
specified user namespace.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
layers restored from a tarball won't be converted to composefs so
disable the cache when using composefs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
the condition is based on the fact that podman save|podman load
doesn't recreate the same digest, thus it would fail if the image in
the additional store was pulled with a simple "podman pull".
The same sequence of commands would fail using podman manually after a
"podman pull alpine".
Ignore the cache and use only the images that were pulled in the main
store.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The tests didn't check anything actually because default_ifname requires
an ip version argument to work. Thus pasta_iface was empty, add new
checks to prevent this kind of error again.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test assumes that if more than 1 ip on the host we should be able to
set host.containers.internal. This however is not how the logic works in
the code. What it actually does is to check all ips in the
rootless-netns and then it knows that it cannot use any of these ips.
This includes any podman bridge ips.
You can reproduce the error when you have only one ipv4 on the host then
run a container as root in the background and run the test:
hack/bats --rootless 505:host.containers.internal
So the failure here was that there was already a podman container
running as root on the default bridge thus the test saw 2 ips but then
the rootless run also uses the same subnet for its bridge and the code
knew that ip would not work either. I could have made another special
condition in test but the better way to work around it is to create a
new network. A new network will make sure there are no conflicting
subnets assigned so the test will pass.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Continuing efforts on making system tests parallel-safe by
using unique names for containers and pods.
Signed-off-by: Ed Santiago <santiago@redhat.com>
"/my-alpine" is also being used by tests in search_test.go;
use unique names to make sure we are trying to pull the encrypted
images created in the test.
Purely to avoid doubt, this should not actually change (test) behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Two tests failing in gating but never CI; add some debug
instrumentation to make it possible to find out what
is going on
Signed-off-by: Ed Santiago <santiago@redhat.com>
These tests are flaking for unknown reasons. One problem could be ncat
did not bound the port before we connect to it. Simple fix do not use
ncat and just use the golang API to listen on the port without the
extra ncat process. This should be race free in theory.
Also do not run the nc container in the background, we want to see the
errors from the ncat process in the container.
And because both tests do the same thing deduplicate them into one that
just uses a loop to create both tests.
Fixes#23263
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Using the scanner is just unnecessary complicated an buggy as it will
not read the final line with a newline. There is also the problem that
it happens in a separate goroutine so it could loose output if we read
the array before the scanner was done.
The API accepts a Writer so we can just directly use a bytes.Buffer
which captures all output in memory without the need of another
goroutine.
This also means that now we always include the final newline in the
output. I checked with docker and they do the same so this is good.
Fixes#23332
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the file is empty it is possible our code panics as bar.ProxyReader
returns nil when the bar is finished which is the case for 0 size as it
doesn't have to read anything from there. However as this happens on
different goroutines it is race and most of the time still works.
To fix this simply skip the progress bar setup for empty files.
While at it fix the deprecated argument in the tests.
Fixes#23281
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
nmap-ncat has been downgraded on Fedora, to 7.92.
nc -l -p PORT requires 7.95. Switch to nc -l ADDR PORT.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The end goal is making this test file parallel-safe, by:
1) Having all tests use unique names for all objects; and
2) Not doing "rm -a" or "expect ps to be empty".
This commit is not enough to make tests parallel-safe. The
rest of the changes are not relevant for now. This set of
changes is _necessary_ for parallelizing, and is _meaningful_
(good practice) for current linear-testing podman without
introducing any unnecessary cruft.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make safename() invocations consistent within the same
test. This puts the onus on the caller to add a unique
element when calling multiple times, e.g. "ctr1-$(safename)".
This is not too much of a burden. Major benefit is making
it easy for a reader to associate containers, pods, volumes,
images within a given test.
And, use dashes, not underscores. "podman generate kube"
removes underscores, making it very difficult to do
things like "podman inspect $podname" (because we need
to generate "$podname_with_underscores_removed")
Signed-off-by: Ed Santiago <santiago@redhat.com>
Many instances. Simplify by having _write_test_yaml() define
the variable TESTYAML and make it available to callers.
Global replace, with care taken to undo any instances
where _write_test_yaml() is not invoked first.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Get rid of the last two instances of the clunky $testYaml
writing, by adding a 'volume=' arg to _write_test_yaml()
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remnant from the very early days of this test file. There's
a boilerplate $testYaml string used in many tests; each
use requires three clunky lines of prep. Most of those
were not needed; we can (and now do) use _write_test_yaml()
instead.
There are still two instances that could not be fixed in
this commit. I will do those next. This commit is kept
relatively simple for ease of review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
