We use filepath.Clean() to remove trailing slashes to ensure that
when we supercede image mounts with mounts from --volume and
--mount, paths are consistent when we compare. Unfortunately,
while we used the cleaned path for the destination in the mount,
it was accidentally not used to index the maps that we use to
identify what to supercede, so our comparisons might be thrown
off by trailing slashes and similar.
Fixes#5219
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We attempted to share all logic for parsing labels and
environment variables, which on the surface makes lots of sense
(both are formatted key=value so parsing logic should be
identical) but has begun to fall apart now that we have added
additional logic to environment variable handling. Environment
variables that are unset, for example, are looked up against
environment variables set for the process. We don't want this for
labels, so we have to split parsing logic.
Fixes#3854
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add pkg/signal to deal with parts of signal processing and translating
signals from string to numeric representations. The code has been
copied from docker/docker (and attributed with the copyright) but been
reduced to only what libpod needs (on Linux).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The changes in #5075 turn out to be too aggressive; we should
only be setting --all if a status= filter is given. Otherwise
only running containers are filtered.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
fix#4876
Add `--device-cgroup-rule` to podman create and run. This enables to add device rules after the container has been created.
Signed-off-by: Qi Wang <qiwan@redhat.com>
When Docker performs a copy up, it first verifies that the volume
being copied into is empty; thus, for volumes that have been
modified elsewhere (e.g. manually copying into then), the copy up
will not be performed at all. Duplicate this behavior in Podman
by checking if the volume is empty before copying.
Furthermore, move setting copyup to false further up. This will
prevent a potential race where copy up could happen more than
once if Podman was killed after some files had been copied but
before the DB was updated.
This resolves CVE-2020-1726.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Lots has changed since I first checked this in:
* Switch to new podman system service invocation
* /containers API has changed drastically
* /pods API has some fixes; check for them (e.g.
container-exists is now 409 Conflict, not 500)
* One test ('?invalidparam=x') still doesn't work;
comment it out so we can get everything passing.
Also, some work on the test framework itself:
* Cleaner port-open testing (the bash /dev/tcp check).
* Add a 'podman' function to invoke local podman and
log its output.
The above two allow us to:
* Get rid of stderr special-casing
Furthermore:
* t() no longer needs leading '.'; this allows jq
features such as 'length' and perhaps other filters
* special-case handling of 204 and 304: rfc2616 demands
that they return no message body; assert that it is so.
* new root & rootless helper functions (check server)
* remove the "unlikely to work" message for rootless;
it seems to be working fine
* fix pod tests for rootless
* BUT: add a bolder FIXME because the ID field seems wrong
Signed-off-by: Ed Santiago <santiago@redhat.com>
The validation logic was failing on properly-formatted changes.
There's already validation in Commit itself, so no need to
duplicate.
Fixes#5148
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This patch lets valid values of --format be compatible with docker. Replace CreatedTime with CreatedAt, Created with CreatedSince.
Keep CreatedTime and Created are valid as hidden options.
Signed-off-by: Qi Wang <qiwan@redhat.com>
When we filter, it should be out of all containers, not just
running ones, by default - this is necessary to ensure Docker
compatability.
Fixes#5050
Signed-off-by: Matthew Heon <mheon@redhat.com>
On F31 CI tests, we have uncovered several failing tests as rootless that need to be fixed. For the interim, we are going to disable those tests. Issue #5006 has been created to track and complete this.
Signed-off-by: Brent Baude <bbaude@redhat.com>
When a container specification has a pull policy, we should honor it when recreating the pods/containers from yaml. furthermore, ini kube, if a tag is :latest, then the always pull policy is automatically instituted.
Fixes: #4880
Signed-off-by: Brent Baude <bbaude@redhat.com>
when a docker image has a defined healthcheck, it should be displayed with inspect. this is only valid for docker images as oci images are not aware of healthchecks.
Fixes: #4799
Signed-off-by: Brent Baude <bbaude@redhat.com>
Move the seccomp profile from a manifest annotation to a config label.
This way, we can support it for Docker images as well and provide an
easy way to add that data via Dockerfiles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Initial framework for testing the version 2 (HTTP) API.
Includes a collection of tests for some of the existing
endpoints. Not all tests are currently passing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The --ignore flag lets Podman ignore errors when a specified container
does not exist (anymore). That's a nice addition to generic services
generated via the --new flag. Those services create new containers and
can hence allows user to manually remove a container; may it only be by
accident.
The important part of using the --ignore flag is that Podman will exit 0
which plays nicer with most restart policies; a non-zero exit may yield
systemd to restart the entire service which is arguably wrong if the
user manually deletes the container.
If desired, users can still alter the generated files.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make the signal test more robust by just checking that the container's
exit code is non-zero. There are two possible exit codes (i.e., 130 and
137) depending on how the container is being killed, which is likely
responsible for CI flakes.
Fixes: #4886
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This should help use keep the codebase more consistent, and avoid sevel
whitespace related issues, or bad file permissions.
pre-commit allows us to easily introduce other linters in follow-ups,
like bashate.
Note: pre-commit tool does *not* install any git-hooks. Making commits
will will call the tool unless you deliverately tell it to install the
hooks.
Signed-off-by: Sorin Sbarnea <ssbarnea@redhat.com>
- run: --name (includes 'podman container exists' tests)
- run: --pull (always, never, missing)
- build: new test for ADD URL (#4420)
- exec: new test for issue #4785 (pipe getting lost)
- diff: new test
- selinux (mostly copied from docker-autotest)
Plus a bug fix: the wait_for_output() helper would continue
checking, eventually timing out, even if the container had
already exited (probably because of an error). Fix: as
part of the loop, run 'podman inspect' and bail out if
container is not running. Include exit code and logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Implement a policy for selecting a seccomp profile. In addition to the
default behaviour (default profile unless --security-opt seccomp is set)
add a second policy doing a lookup in the image annotation.
If the image has the "io.containers.seccomp.profile" set its value will be
interpreted as a seccomp profile. The policy can be selected via the
new --seccomp-policy CLI flag.
Once the containers.conf support is merged into libpod, we can add an
option there as well.
Note that this feature is marked as experimental and may change in the
future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a --new flag to podman-generate-systemd to create a new container
via podman-run instead of starting an existing container.
Creating a new container presents the challenge to find a reverse
mapping from a container to the CLI flags it can be created with. We
are doing this via `(Container).Config.CreateCommand` field, which
includes a copy of the process' command from procFS at creating time.
This field may not be useful when the container was not created via the
Podman CLI (e.g., via a Python script). Hence, we do not guarantee the
correctness of the generated files.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman now supports untagging images via the `untag` sub-command for the
root and `image` commands. Testing and documentation has been added as
well.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Add flag --seccomp-profile-root in play kube to allow users to specify where to look for seccomp profiles
update tests
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Keep the original input source path with "/." so podman can copy the content of the directory when copying from container to host.
Signed-off-by: Qi Wang <qiwan@redhat.com>
