honor eventual options set in the containers.userns setting in the
containers.conf file, e.g.:
[containers]
userns = "auto:size=8192"
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Quadlet was doing some custom handling of uid/gid remapping, originating
from pre --userns=auto support, including its own user for getting subuids
which kinda conflicts with the "container" user used for that.
This drops all the old support for id remapping in favour of a new set
of keys that more directly map to the podman run options.
We have essentially 3 modes now:
```
RemapUsers=manual
RemapUid=0:10000:10
RemapUid=10:20000:10
RemapGid=0:10000:10
RemapGid=10:20000:10
```
This maps to --uidmap and --gidmap options.
```
RemapUsers=auto
```
This maps to --userns=auto. But you can additionally specify RemapUid,
RemapGid and RemapUidSize which gets applied as options to the
--userns podman option.
```
RemapUsers=keep-id
```
This maps to --userns=keep-id and only works for user units.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
The 900-ssh test is not an actual test, and I'm unable to
figure out how to make it one. Skip it for now, but add a
bunch of FIXMEs some someone can come in later and actually
implement it.
Also removed lots of dead code and misleading comments.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The current test uses registry.redhat.io which does not support unauthenticated access
Replace the registry with registry.access.redhat.com which does
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
It's so easy to forget that "podman start" is nonblocking.
So podman create, start, restart has a race where "restart"
can run before the container actually starts.
Solution: start --attach. Thanks to @vrothberg for noticing that.
There are still a handful of other suspicious-looking restarts
in this test, but all involve "top" which of course has to be
detached. Since those don't have any flakes that I know of, I
choose to ignore them.
Fixes: #16505
Signed-off-by: Ed Santiago <santiago@redhat.com>
Podman --noout was not suppressing output from commands that do not
create the podman engine. Now, podman --noout properly suppresses output
from every command.
Fixes: https://github.com/containers/podman/issues/16201
Signed-off-by: Ashley Cui <acui@redhat.com>
No issue filed, because I thought these were related to 16132.
They're not: they're actual test bugs, running "play kube"
without actually waiting for the container to run. Fix that.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Weird one-off flake seen:
# ... healthcheck run <containername>
Error: container SHA is not running
The only way I can see this happening is if the healthcheck
auto-timer triggered, which seems impossible because that
should be 30s and the log timestamps show this test taking
18s. But, shrug, let's see if disabling the timer works. I
don't have high hopes that this will fix anything, but it's
probably a good idea regardless.
Also, since this test loops over different policies, include
policy name in error messages as a courtesy. (It's obtainable
anyway by scrolling up)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Docker's newer clients popuates `cacheFrom` and `cacheTo` parameter
by default as empty array for all commands but buildah's design of
distributed cache expects this to be a repo not image hence parse
only the first populated repo and igore if empty array.
Signed-off-by: Aditya R <arajan@redhat.com>
Fix a bug for special-casing "." where Podman has mistakenly been
looking for a "." suffix instead of interpreting it as a path.
Add regression tests for the host-to-container, container-to-host and
container-to-container use cases. Have separate tests for each to
verify that previous Podman versions fail each case.
Fixes: #16421
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--connection was failing due to the servicedestinations array being empty on runtime.
Fix by making sure the cached config is used
resolves#16282
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Attempts to fix#16419
podman generate systemd --restart-sec pod
^now generates RestartSec= both in pod service file and in container service file.
podman generate systemd --restart-sec container
^now generates RestartSec= in container service file.
Signed-off-by: Veronika Fuxova <vfuxova@redhat.com>
`--format json` should not be the same as `--format {{json .}}`, the
later should actually run through the go template and thus create one
json object per entry instead of an json array.
Includes a vendor of c/common@main since it requires a fix from there as
well.
This matches docker compat.
Fixes#16436
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman-remote` does not support `--events-backend`, which overrides a
log driver. When `--events-backend` is necessary in a test for
`podman-remote`, the test should be skipped.
We don't need to fix the other cases with
`_additional_events_backend()` because `_log_test_follow()` already has
the same skipping logic and `_log_test_multi()` always skips a test when
testing `podman-remote`.
Signed-off-by: Hironori Shiina <shiina.hironori@fujitsu.com>
Up - do not fail if volume already exists, use the existing one
Down - allow the user to remove the volume by passing --force
Add tests
Update the documentation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
When we are using a proxy, 'podman build - basic test'
will be failed on remote.
This test needs to add the '--http-proxy' option.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
_test_skopeo_credential_sharing() used port_is_free() to check if a
port has no active listeners. With the new implementation, this is
not equivalent anymore: a port might be in TIME_WAIT, so it's not
free, but the listener might be long gone.
Add tcp_port_probe() to check if there's an active listener on a
given port, and use it in _test_skopeo_credential_sharing().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These tests should cover all the basic networking functionality with
pasta(1). Namely, they check:
- IPv4 and IPv6 addressing and routing settings
- TCP and UDP port forwarding over IPv4 and IPv6
- data transfers and ICMP/ICMPv6 echo requests
- the (exceedingly simple) lifecycle handling
These tests need some new helpers, to obtain IPv4 and IPv4 addresses
and routes, as well as MTU and interface names. Those use jq(1) for
parsing.
Some availability checks are implemented as well, to skip tests if
pasta(1) is not available, or if IPv4 and IPv6 are not usable.
To get consistent outcomes across distributions, and to enable
uncomplicated termination for UDP tests based on zero-sized packets,
use socat(1), which, unlike netcat, doesn't suffer from option
inconsistencies depending on flavours (traditional, BSD, NMAP) and
versions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The main helpers.bash file is rather bloated and it's difficult to
find stuff there. Move networking functions to their own helper
file.
While at it, apply a consistent style, and rearrange logically
related functions into sections.
Suggested-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Using bash /dev/tcp/ pseudo-device files to probe for bound ports has
indeed the advantage of simplicity, but comes with a few drawbacks:
- it will actually send data to unsuspecting services that might be
running in the same network namespace as the tests, possibly
causing unwanted interactions
- it doesn't allow for UDP probing
- it makes it impossible to clearly distinguish between different
address bindings
Replace that approach with a new helper, port_is_bound(), that uses
procfs entries at /proc/net to detect bound ports, without the need
for active probing.
We can now implement optional parameters in callers, to check if a
port if free for binding to a given address, including any IPv4
(0.0.0.0) or any IPv6 (::0) address, and for a given protocol, TCP
or UDP.
Extend random_free_port() and random_free_port_range() to support
that.
The implementation of one function in the file
test/system/helpers.bash, namely ipv6_to_procfs(), and the
implementation of the corresponding own test, delimited by the
markers "# BEGIN ipv6_to_procfs" and "# END ipv6_to_procfs" in the
file test/system/helpers.c was provided, on the public forum at:
https://github.com/containers/podman/pull/16141
by Ed Santiago <santiago@redhat.com>, who expressly invited me to
include them in this code submission.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
