Commit f131eaa74a changed restart to a stop+start motivated by
comments in the systemd man pages that restart behaves different than
stop+start, for instance, that it keeps certain resources open and
treats timers differently. Yet, the actually fix for #17607 in the very
same commit was dealing with an ENOENT of the CID file on container
removal.
As it turns out in in #18926, changing to stop+start regressed on
restarting dependencies when auto updating a systemd unit. Hence, move
back to using restart to make sure that dependent systemd units are
restarted as well.
An alternative could be recommending to use `BindsTo=` in Quadlet files
but this seems less common than `Requires=` and hence more risky to
cause issues on user sites.
Fixes: #18926
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The code was moved to c/common so use that instead. Also add tests for
the new pasta_options config field. However there is one outstanding
problem[1]: pasta rejects most options when set more than once. Thus it is
impossible to overwrite most of them on the cli. If we cannot fix this
in pasta I need to make further changes in c/common to dedup the
options.
[1] https://archives.passt.top/passt-dev/895dae7d-3e61-4ef7-829a-87966ab0bb3a@redhat.com/
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit creates a new command `podmansh` command which can be used by
administrators to provide a confined shell to their users.
The user will only have access to the volumes and capabilities for that
user.
Co-authored-by: Paul Holzinger <pholzing@redhat.com>
Co-authored-by: Daniel Walsh <dwalsh@redhat.com>
Co-authored-by: Petr Lautrbach <lautrbach@redhat.com>
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
podman info prints the network information about binary path,
package version, program version and DNS information.
Fixes: #18443
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Remove an outdated comment on the absence of exit-code propagation when
running K8s workloads in systemd. The `podman-kube@` systemd template
is using default restart policy of the system. The exit-code
propagation is tested in other tests, so we can keep the logic as is.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
For filter=id=XXX (containers, pods) and =ctr-ids=XXX (pods):
if XXX is only hex characters, treat it as a PREFIX
otherwise, treat it as a REGEX
Add tests. Update documentation. And fix an incorrect help message.
Fixes: #18471
Signed-off-by: Ed Santiago <santiago@redhat.com>
Test that pasta generates a sensible error message if asked to forward a
protocol it doesn't understand.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We _usually_ have only one image in store, $IMAGE, but it's
perfectly fine to also have $SYSTEMD_IMAGE also. Fix a few
tests so they can handle that condition.
And, cleanup:
- remove a no-longer-useful test ("podman load NEWNAME",
functionality that was removed 2+ years ago in #8877)
- reorder some tests in the image-mount test, to make
them safer and easier to understand
- use no-such-image, not no-such-container, in image-mount test.
Computer don't care, but this human felt confused for a sec.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The current way of bind mounting the host timezone file has problems.
Because /etc/localtime in the image may exist and is a symlink under
/usr/share/zoneinfo it will overwrite the targetfile. That confuses
timezone parses especially java where this approach does not work at
all. So we end up with an link which does not reflect the actual truth.
The better way is to just change the symlink in the image like it is
done on the host. However because not all images ship tzdata we cannot
rely on that either. So now we do both, when tzdata is installed then
use the symlink and if not we keep the current way of copying the host
timezone file in the container to /etc/localtime.
Also note that we need to rebuild the systemd image to include tzdata in
order to test this as our images do not contain the tzdata by default.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2149876
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Systemd doesn't support `never` and logs a warning, systemd uses no as
default so we do not have to specify it at all.
Check systemd.service(5) for the systemd docs.
Fixes#18743
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Reduce sleep-loop time in logs test, from 1s to 0.1s,
to make 'podman stop' take effect more quickly. With 1s,
and testing with 1s resolution, we get flakes.
Fixes: #17826
Signed-off-by: Ed Santiago <santiago@redhat.com>
The new exit-code propagation test is racy: 'podman wait' can
fail if the service container has already been cleaned up by
systemd.
Solution: run the inspect and wait tests opportunistically, i.e.,
only if those commands succeed. If they fail, confirm that they
fail with ENOSUCHCONTAINER. This may silently lose us some
coverage ... but none of it is important. The important
test, systemctl final status, remains.
Also, as drive-bys:
- add a FIXME comment documenting another race condition
that I'm not bothering to fix right now
- give distinct names to unit files, for readability in
test failures
Fixes: #18732
Signed-off-by: Ed Santiago <santiago@redhat.com>
When we do path completion in images a user could try to complete a
simple relative path, e.g. podman run $IMAGE e... should complete to etc
if this path exists in the image. Right now we panic in this case as the
current check didn't account for an empty string in simplePathJoinUnix().
In such a case return the path directly because we can not alter what
the user typed on the cli and must return a path without slash as well
in order for the shell to suggest the completion.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2209809
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There are quite a lot of places in podman were we have some signal
handlers, most notably libpod/shutdown/handler.go.
However when we rexec we do not want any of that and just send all
signals we get down to the child obviously. So before we install our
signal handler we must first reset all others with signal.Reset().
Also while at it fix a problem were the joinUserAndMountNS() code path
would not forward signals at all. This code path is used when you have
running containers but the pause process was killed.
Fixes#16091
Given that signal handlers run in different goroutines parallel it would
explain why it flakes sometimes in CI. However to my understanding this
flake can only happen when the pause process is dead before we run the
podman command. So the question still is what kills the pause process?
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use ExecStopPost instead of ExecStop to make sure containers, pods, etc.
are all cleaned up even in case of an error.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add a new field `ExitCodePropagation` field to allow for configuring the
newly added functionality of controlling how the main PID of a kube
service exits.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Implement means for reflecting failed containers (i.e., those having
exited non-zero) to better integrate `kube play` with systemd. The
idea is to have the main PID of `kube play` exit non-zero in a
configurable way such that systemd's restart policies can kick in.
When using the default sdnotify-notify policy, the service container
acts as the main PID to further reduce the resource footprint. In that
case, before stopping the service container, Podman will lookup the exit
codes of all non-infra containers. The service will then behave
according to the following three exit-code policies:
- `none`: exit 0 and ignore containers (default)
- `any`: exit non-zero if _any_ container did
- `all`: exit non-zero if _all_ containers did
The upper values can be passed via a hidden `kube play
--service-exit-code-propagation` flag which can be used by tests and
later on by Quadlet.
In case Podman acts as the main PID (i.e., when at least one container
runs with an sdnotify-policy other than "ignore"), Podman will continue
to wait for the service container to exit and reflect its exit code.
Note that this commit also fixes a long-standing annoyance of the
service container exiting non-zero. The underlying issue was that the
service container had been stopped with SIGKILL instead of SIGTERM and
hence exited non-zero. Fixing that was a prerequisite for the exit-code
propagation to work but also improves the integration of `kube play`
with systemd and hence Quadlet with systemd.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
RHEL gating tests failing, because (sigh) journalctl doesn't
work rootless on RHEL.
I think the flake is fixed anyway, so we don't need this.
This reverts commit ba141adce4.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Instrument system tests in hopes of tracking down #17216,
the unlinkat-ebusy-hosed flake.
Oh, also, timestamp.awk: timestamps have always been UTC, but
add a 'Z' to make it unambiguous.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure to look for the container's exit code when it's in stopped
state. With `--restart=always`, the container seems to stay in the
stopped state which led the wait logic to loop until the 20 seconds
timeout for the cleanup process to have finished kicks in.
Also defensively make sure to loop when the container is in stopped
state but no exit code has been written yet.
Add a regression test to make sure Podman doesn't wait more than 20
seconds. Even on a CI machine under high load I expect it to take much
much much less than that, so I do not expect this test to flake in the
future.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Enable the --configmap flag for the remote case of podman
kube play. Users can pass in the paths to the configmap files
for kube play to use when creating the pods and containers from
a kube yaml file. The configmap file is read and the contents are
appended to the contents of the main yaml file before passed to the
remote client.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
In run_podman(), display a nanosecond-level timestamp next to
each command and its output.
Because this clutters the results, teach logformatter to grok
these new timestamps, strip them, and display a more human-readable
time delta in the left-hand timestamp column. logformatter started off
as a mess and is now, well, 🤮. I'm sorry. I just hope its results
make it worthwhile.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Read the entire YAML file in case of a multi-doc file
Adjust the unit test
Add a system test
Add comment in the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Several tweaks to see if we can track down #17216, the unlinkat-ebusy
flake:
- teardown(): if a cleanup command fails, display it and its
output to the debug channel. This should never happen, but
it can and does (see #18180, dependent containers). We
need to know about it.
- selinux tests: use unique pod names. This should help when
scanning journal logs.
- many tests: add "-f -t0" to "pod rm"
And, several unrelated changes caught by accident:
- images-commit-with-comment test: was leaving a stray image
behind. Clean it up, and make a few more readability tweaks
- podman-remote-group-add test: add an explicit skip()
when not remote. (Otherwise, test passes cleanly on
podman local, which is misleading)
- lots of container cleanup and/or adding "--rm" to run commands,
to avoid leaving stray containers
Signed-off-by: Ed Santiago <santiago@redhat.com>
Run $QUADLET and all systemctl/journalctl commands using 'timeout'.
Nothing should ever, ever take more than the default 2 minutes.
Followup to #18514, in which quadlet tests are found to be
taking 9-10 minutes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
