Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
This is a follow up to 5389eee7376cf81fbfdaf58cd58d38b287f5da23
to add rooltess.md information to man pages to help users
discover solutions to troubleshooting and rooless issues.
Specicifally I was surprised when binding to ports < 1024 was
not covered in podman-troubleshooting.7 man page.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
HPC Community asked for this support specifically for using GPUs
within containers. Nvidia requires the correct shared library to
to be present in the directory that matches the device mounted
into the container. These libraries have random suffixes based
on versions of the installed libraries on the host.
podman run --mount type=glob:src=/usr/lib64/nvidia\*:ro=true. This helps
quadlets be more portable for this use case.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Only use the word "please" in these situations:
- reader is asked to do something inconvenient
- reader is asked for permission
- reader is asked for forgiveness
Remove other uses of the word "please" to
make the language more efficient.
[NO NEW TESTS NEEDED]
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
* add tests
* add documentation for --shm-size-systemd
* add support for both pod and standalone run
Signed-off-by: danishprakash <danish.prakash@suse.com>
Startup healthchecks are similar to K8S startup probes, in that
they are a separate check from the regular healthcheck that runs
before it. If the startup healthcheck fails repeatedly, the
associated container is restarted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This was a horrible one. I basically went with the podman-run
version, with a few minor changes. See PR for discussion of
diff review.
podman-build is not included here, it is too different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Accumulated cleanup from the man-page deduplication effort.
Various minor things that slipped.
--publish-all : remove duplicate "default is false" (toth @dilyanpalauzov)
--shm-size : rephrase 'you' and 'y'all'
--tls-verify : make narrower, add asterisks to true/false,
and linkify containers-registries.conf
--volume : incorporate feedback from @mheon
rename pid.md to pid.container.md, because there's a pid.pod.md
for the --pid option used in pod-related man pages.
...and some whitespace, comma, other minor edits
Fixes: #15356
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-create and -run; podman-start was too
different. (But please look into it, maybe there's a way
to reconcile the diffs).
Very minor formatting changes made to reconcile the two.
Easy to review using hack/markdown-preprocess-review
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-create and -run; the other meanings
of --pod are too different. This almost didn't feel worth
refactoring, except the podman-run version fixed a word
and added a possibly important note about infra containers.
I went with the podman-run version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Two different texts, split into two .md files. Nontrivial, but
still easy to review because the text is unchanged.
I was unable to reconcile either version with podman-build,
so that file remains with a separate version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Tricky one. In particular: podman-kube-play did not enumerate
the "host" option; here I take the liberty of using it in the
common network.md, so it will appear in podman-kube-play.1.
If that is wrong, please tell me ASAP: I will need to un-refactor
podman-kube-play.
Other decisions:
* move the "invalid if" text to the bottom, because it can't
be shared between pod and container man pages.
* ditto for "together with --pod"
* kube-play said "Change the network mode of"; all the others
said ">SET< the network mode >FOR< ...". I chose the latter,
so that's what kube-play will have also. Again, if that's
wrong, please lmk.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Simple in reality, but hard to review due to lots of little diffs:
- "Logging driver specific options" was only in podman-run; I added it
to create and kube-play.
- whitespace changes, the 'e.g.'s got consistent 4-space indentation
- the "same keys" and "supported only" sentences, I moved up to be
closer to **tag** and without intervening whitespace, because they
were unclear as they were: I believe the intent is to apply those
sentences only to **tag**, not to the **--log-opt** option itself.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Another easy one. Option is only present in these three man pages.
I took the liberty of changing the "See note" text, making it
the same as --env. I also took the liberty of hyphenating
"line-delimited" because that's the correct thing to do.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only among podman create, exec, run. The same option in
podman build, generate-systemd, and secret-create is too
different.
Should be a trivial one to review, the only difference is
a period at the end of one sentence. And, of course, the
"See Environment note" applies only to podman-create and
run, not exec, so it can't be deduplicated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-build, create, and run. podman-pod-create
is too different.
As usual I went with the podman-run version. This means
keeping the word "flag" (which should be "option"), for
ease of review. I will fix in my in-progress cleanup PR.
For podman-build, I removed "during the build" and changed
it to a note for that man page only.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Mostly went with the podman-run version. For ease of review, I
kept the "you" word -- I will fix that in my in-progress
cleanup PR.
This affects lots of files, each of which had slightly different
wording, but this actually isn't as bad as it looks. The diffs
were minor, and I'm pretty sure the new refactored text applies
equally well to all the man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Three simple options shared among podman-create, exec, run.
I mostly went with the podman-run versions. For --tty, this
means that create and exec get the long stdout/stderr note.
(The example, though, remains only in podman-run). For -i,
mostly boldspace changes.
For --preserve-fds, podman-exec now has the "not with remote"
note (which it didn't until now)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Similar to yesterday's --ip. No changes to content, all I did
was variableize the instances of 'container'/'pod'.
Did not touch podman-network-connect file, but if someone
wants to look at that one and tell me whether all this long
text is applicable to it (or not), I'd appreciate it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The default ip is 10.0.2.2 but is always the second ip from the
slirp4netns subnet, which can be changed via the cidr option.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2090166
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Ugh. This had about five different variations among twelve files.
I went with the version from podman-create, kube play, login, pull,
push, run. The others:
- manifest-add and create did not include the "true, false, missing"
text. Now they do. (If this text is N/A to these two, please yell).
Also, these two were written with "talking" instead of "contacting"
the registry.
- podman-build had "does not work with remote", but this
does not seem to be true, so I removed it. None of the
other files had that.
- the wording in podman-search is just weird, with "if needed"
and "is listed" and unclear "insecure registries". I just
nuked it all. If that wording was deliberate, for some reason
that applies only to podman-search, please yell.
- podman-container-runlabel has one diff that I like, actually
spelling out containers-registries.conf(5), but incorporating
that would make this even harder to review. I will add that
to my in-progress doc-cleanup PR.
Review recommendation: run hack/markdown-preprocess-review but
just quit out of it immediately (on both popups). Ignore it completely.
Then cd /tmp/markdown-preprocess-review.diffs/tls-verify and run
$ clear;for i in podman-*;do echo;echo $i;wdiff -t $i zzz-chosen.md;done
This will show the major diffs between each version and the chosen one.
Assumes you have wdiff installed. If you have another colorize-actual-
individual-word-diffs tool installed, use that. I like cdif[1].
[1] https://github.com/kaz-utashiro/sdif-tools
Signed-off-by: Ed Santiago <santiago@redhat.com>
Almost identical between podman-create, run, and pod-create.
The "Notes" are different, so I left those duplicated between
podman-create and run, and left the different one in pod-create.
podman-container-restore also has --publish but it's unrelated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only shared between podman-create and run. The latter was
updated in #5192, and that is the text I chose.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only shared by podman-create, -pull, -run. No changes
made other than whitespace, so this should be a gimme.
podman-build, import, and manifest-* also have --os options,
but those are unrelated and I can't find a way to combine
any two of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Between podman-create, run, and pod-create. The big difference
is that I changed 'IP' to 'IPv4' in podman-pod-create, I believe
that was an oversight in #12611.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman-create and -run only. The SELinux text was added
to podman-run (but not -create) in #3631, and reformatted
in #5192. I assume here that it also applies to podman-create.
Per feedback from Dan, added :s0 to SELinux context
Signed-off-by: Ed Santiago <santiago@redhat.com>
Removed a spurious right-bracket; went with upper-case for options;
removed 'you's; added some <<container|pod>>s.
Hard to review because none of the existing man pages had it
quite right.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This one is a nightmare, because --volume has been edited
in four different files throughout the years (five if you
count podman-build, which I am not including in this PR).
Those edits have not always been done in sync.
The list of options was reordered 2022-06-28 by Giuseppe in #14734,
but only in podman-create and -run (not in podman-pod-*). No
explanation of why, but I'll assume he knew what he was doing,
and have accepted that for the reference copy.
There was also a big edit in #8519.
The "Propagation property...bind mounted" sentence first appeared
in pod-clone, in #14299 by cdoern, with no obvious source of where
it came from. I choose to include it in the reference copy.
The "**copy**" option seems to work in pod-create, so I'm including
it in the reference copy. Someone please yell loudly if this is
not the case.
The "disables SELinux separation for containers used in the build",
no idea, changed that to just "for the container/pod"
The "advanced users / overlay / upperdir / workdir" paragraph
makes zero sense to me, but hey, I assume it applies to all
the commands, so I put it in the reference copy.
Finally, there's still a mishmash of backticks, asterisks, underscores,
and even quotation marks. Someone is gonna have to perform major
cleanup on this one day, but at least it'll be in only one place.
Signed-off-by: Ed Santiago <santiago@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
