Do not use the interspersed option for logs, it is not needed and just
restricts valid use cases.
Fixes#25653
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is valid and the upstream linter allows it but somehow with
golangci-lint it produces an error:
Success matcher only support a single error value, or function with Gomega as its first parameter
I reported a bug upstream[1] but for now let's just ignore it so we can
update the linter.
[1] https://github.com/golangci/golangci-lint/issues/5398
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Many dependencies started using go 1.22 which means we have to follow in
order to update.
Disable the now depracted exportloopref linter as it was replaced by
copyloopvar as go fixed the loop copy problem in 1.22[1]
Another new chnage in go 1.22 is the for loop syntax over ints, the
intrange linter chacks for this but there a lot of loops that have to be
converted so I didn't do it here and disable th elinter for now, th eold
syntax is still fine.
[1] https://go.dev/blog/loopvar-preview
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Followup to [1]#22270: wherever possible/practical, extend command
error checks to include explicit exit status codes and error strings.
Just trying to shrink down #22346 to a manageable, reviewable size.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
...from f38 + f37.
Requires one minor e2e test change, to handle an error logging
change in conmon 2.1.8.
Also, this is important, requires crun-1.9.1 because of a kernel
symlink change; see https://github.com/containers/crun/pull/1309
The VM images here were carefully built to include that. By the
time the next VM images get built, it should be default.
Since we've bumped crun, remove two obsolete skips
And, skip a flaky pasta test, #20170
Signed-off-by: Ed Santiago <santiago@redhat.com>
Commit 2 of 2: manual fixes to get tests to pass
Mostly adding "-q" to pull & push. In a few places that's
not possible, so revert to Exit(0) with stderr checks.
We do a *LOT* of image pulling! In a desperate attempt
to fix that, change some instances of ALPINE to CITEST_IMAGE.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We need to actually check the output not just exit codes. While doing
this it was clear that the first test was not checking what it should
be so I had to remove the quotes from the arg.
Also this check did not work with remote testing at all, we must set the
env then restart the server as the env for conmon must be set on the
server obviously.
Also we can only match the conmon error messages on the local client.
Lastly this test requires the journald driver but we cannot use the in
container tests so skip it there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
...to reduce flakes.
Reason: journald makes no guarantees. Just because a systemd job
has finished, or podman has written+flushed log entries, doesn't
mean that journald will actually know about them:
https://github.com/systemd/systemd/issues/28650
Workaround: wrap some podman-logs tests inside Eventually()
so they will be retried when log == journald
This addresses, but does not close, #18501. That's a firehose,
with many more failures than I can possibly cross-reference.
I will leave it open, then keep monitoring missing-logs flakes
over time, and pick those off as they occur.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Sometimes this tests flakes but in the CI log I see all expected lines
printed but still for some reason the matcher fails.
Right now it will truncate the array so it is not possible to verify
what the matcher sees. Change this be removing the truncate limit for
this specific test only.
see #18501
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
A few tests were doing "podman run -d" + "podman logs".
This is racy. Remove the unnecessary "-d".
And, as long as we're mucking around in here:
- remove the "-t" from the 800-lines test, so we get
clean output without ^Ms
- remove unnecessary "sh", "-c" from simple echo commands
- add actual error-message checks to two places that
were only checking exit status
Resolves one (not all) of the flakes tracked in #18501
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Yet another case of missing podman-wait. In these two, I see
no reason to run containers detached, so I just removed "-d"
Signed-off-by: Ed Santiago <santiago@redhat.com>
- fix a typo that was resulting in a test being a NOP, and
add actual testing to it.
- fix two Expects() with incorrectly-ordered actual/expects
- remove leading whitespace from an It() test name
- To(BeTrue()) is evil. Wherever possible, replace it with
useful string or field checks. When not possible, use
the annotation field to indicate what failed. I got
carried away here, #sorrynotsorry
- remove unused system-test code
Signed-off-by: Ed Santiago <santiago@redhat.com>
...at least as many as possible. "run/exec -it" make no sense
in a CI environment; I believe the vast majority of these are
the result of fingers typing on autopilot, then copy/pasting
cascades from those. This PR gets rid of as many -it/-ti as
possible. Some are still needed for testing purposes.
Y'all have no idea how much I hate #10927 (the "no logs from conmon"
flake). This does not fix the underlying problem, nor does it even
eliminate the flake (The "exec terminal doesn't hang" test needs
to keep the -ti flag, and that's one of the most popular flakers).
But this at least reduces the scope of the problem. It also removes
a ton of nasty orange "input device is not a TTY" warnings from logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
...mostly just test code that wasn't doing the required waits.
My first approach in the kube-play test was to add "--wait".
Bit mistake! The --wait flag, counterintuitively and counter to
documentation, actually destroys all pods+containers+everything
on exit. (Or tries -- see #17803). Since this violates POLA
and is undocumented, I include here a fix to the man page.
Despite my best intentions, I can't reasonably check every single
test for missing waits, especially in kube-play where failing
containers will get retried forever so we can't wait. We'll
just have to fix flakes as we see them.
Fixes: #17958Fixes: #18071
Signed-off-by: Ed Santiago <santiago@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It looks like #16132 was my fault: a missing 'wait' for a container
to exit. Let's see if this fixes the flake.
And, while poking through flake logs, I found another missing wait.
And... in wait_for_output(), address a potential race.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fixed issue where executing the command `podman pod logs -l` would panic
because it was indexing into an empty arguments array.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
In view of https://github.com/containers/storage/pull/1337, do this:
for f in $(git grep -l stringid.GenerateNonCryptoID | grep -v '^vendor/'); do
sed -i 's/stringid.GenerateNonCryptoID/stringid.GenerateRandomID/g' $f;
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The backend should not convert partial lines to full log lines. While
this works for most cases it cannot work when the last line is partial
since it will just be lost. The frontend logic can already display
partial lines correctly. The journald driver also works correctly since
it does not such conversion.
Fixes#14458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test calls podman run -d followed by podman logs. There is no
guarantee the the container or conmon has written all its output.
Adding an extra podman wait should fix this.
Do not remove the -d to not print 1000 unnecessary lines in the logs.
Fixes#14362
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Found by my find-obsolete-skips script. Let's see which, if any,
of these skipped tests can be reenabled.
Some Skips are "this will never work", not "this is expected to
work one day". Update the message on those to reflect that.
Some were real bugs in the test framework. Fix those.
And, joy of joys, some work today. Remove those skips.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The following problems regarding `logs --tail` with the journald log
driver are fixed:
- One more line than a specified value is displayed.
- '--tail 0' displays all lines while the other log drivers displays
nothing.
- Partial lines are not considered.
- If the journald events backend is used and a container has exited,
nothing is displayed.
Integration tests that should have detected the bugs are also fixed. The
tests are executed with json-file log driver three times without this
fix.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
we were adding a negative duration in podman events, causing inputs like
-5s to be correct and 5s to be incorrect.
fixes#11158
Signed-off-by: cdoern <cdoern@redhat.com>
compat containers/logs was missing actual usage of until query param.
This led me to implement the until param for libpod's container logs as well. Added e2e tests.
Signed-off-by: cdoern <cdoern@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix a race in the k8s-file logs driver. When "following" the logs,
Podman will print the container's logs until the end. Previously,
Podman logged until the state transitioned into something non-running
which opened up a race with the container still running, possibly in
the "stopping" state.
To fix the race, log until we've seen the wait event for the specific
container. In that case, conmon will have finished writing all logs to
the file, and Podman will read it until EOF.
Further tweak the integration tests for testing `logs -f` on a running
container. Previously, the test only checked for one of two lines
stating that there was a race. Indeed the race was in using `run --rm`
where a log file may be removed before we could fully read it.
Fixes: #10596
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a race in journald driver. Following the logs implies streaming
until the container is dead. Streaming happened in one goroutine,
waiting for the container to exit/die and signaling that event happened
in another goroutine.
The nature of having two goroutines running simultaneously is pretty
much the core of the race condition. When the streaming goroutines
received the signal that the container has exitted, the routine may not
have read and written all of the container's logs.
Fix this race by reading both, the logs and the events, of the container
and stop streaming when the died/exited event has been read. The died
event is guaranteed to be after all logs in the journal which guarantees
not only consistencty but also a deterministic behavior.
Note that the journald log driver now requires the journald event
backend to be set.
Fixes: #10323
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Some log tests were duplicated, and some didn't need to be repeated for
every driver. Also, added some comments
Signed-off-by: Ashley Cui <acui@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
