This commit adds new Retry= and RetryDelay= options
to quadlet.go which result in --retry and --retry-delay
usage in podman run, image and build commands.
This allows configuring the retry logic in the systemd
files.
Fixes: #25109
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This commit simplifies the systemd parser logic, and it solves an
infinite loop when using a continuation line.
Closes: https://github.com/containers/podman/issues/24810
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
By default today, the container is always started if its pod is also
started. This prevents to create custom with systemd where containers in
a pod could be started through their `[Install]` section.
We add a key `StartWithPod=`, enabled by default, that enables one to
disable that behavior.
This prevents the pod service from changing the state of the container
service.
Fixes#24401
Signed-off-by: Farya L. Maerten <me@ltow.me>
There is no good reason for the special case, kube and pod units
definitely need it. Volume and network units maybe not but for
consistency we add it there as well. This makes the docs much easier to
write and understand for users as the behavior will not differ.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
As documented in the issue there is no way to wait for system units from
the user session[1]. This causes problems for rootless quadlet units as
they might be started before the network is fully up. TWhile this was
always the case and thus was never really noticed the main thing that
trigger a bunch of errors was the switch to pasta.
Pasta requires the network to be fully up in order to correctly select
the right "template" interface based on the routes. If it cannot find a
suitable interface it just fails and we cannot start the container
understandingly leading to a lot of frustration from users.
As there is no sign of any movement on the systemd issue we work around
here by using our own user unit that check if the system session
network-online.target it ready.
Now for testing it is a bit complicated. While we do now correctly test
the root and rootless generator since commit ada75c0bb8 the resulting
Wants/After= lines differ between them and there is no logic in the
testfiles themself to say if root/rootless to match specifics. One idea
was to use `assert-key-is-rootless/root` but that seemed like more
duplication for little reason so use a regex and allow both to make it
pass always. To still have some test coverage add a check in the system
test to ask systemd if we did indeed have the right depdendencies where
we can check for exact root/rootless name match.
[1] https://github.com/systemd/systemd/issues/3312Fixes#22197
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Quadlet inserts network-online.target Wants/After dependencies to ensure pulling works.
Those systemd statements cannot be subsequently reset.
In the cases where those dependencies are not wanted, we add a new
configuration item called `DefaultDependencies=` in a new section called
[Quadlet]. This section is shared between different unit types.
fixes#24193
Signed-off-by: Farya L. Maerten <me@ltow.me>
There is no reason to validate the args here, first podman may change
the syntax so this is just duplication that may hurt us long term. It
also added special handling of some options that just do not make sense,
i.e. removing 0.0.0.0, podman should really be the only parser here. And
more importantly this prevents variables from being used.
Fixes#24081
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
e.g.: if the pod name is systemd-awd, the name of its infra container will be systemd-awd-infra
Signed-off-by: Misaki Kasumi <misakikasumi@outlook.com>
Add support for the ServiceName key for all unit types
Extend the PodInfo struct into UnitInfo to consolidate all prepopulated data into a single map
Use the NodesInfo map instead of the resourceName
Update the UnitInfo in the convert function instead of returning it
No need to replace extension anymore just remove it
All e2e tests with dependencies on other Quadlet files moved to a separate section
Add the capability of overriding the service name in the test
Add e2e tests for the new functionality
Adjust integration tests
Update the MAN page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Adds a `NetworkAlias=` key to both .container and .pod quadlet files,
which translates to the `--network-alias` option to `podman run` and
`podman pod create` respectively. Can be repeated multiple times.
Signed-off-by: Félix Saparelli <felix@passcod.name>
I found that Quadlet didn't currently have support for log options.
This merge allows Quadlet to handle log options and correctly
pass those values through to `podman run` for Container and Kube
types.
Syntactically consistent with existing parameters:
```ini
[Container]
Image=localhost/imagename
LogOpt=path=/var/log/container/mycontainer.json
LogOpt=size=10mb
```
Signed-off-by: Brett Calliss <brett@obligatory.email>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
If a container unit starts on boot with a dependency on `default.target`
the image unit may start too soon, before network is ready. This cause
the unit to fail to pull the image.
- Add a dependency on `network-online.target` to make sure image pulls
don't fail.
See https://github.com/containers/podman/issues/21873
- Document the hardcoded dependency on `network-online.target` for images unit
and explain how it can be overriden if necessary.
- tests/e2e/quadlet: Add `assert-last-key-regex`
Required to test the `After=` override in [Unit] section
See https://github.com/containers/podman/pull/22057#issuecomment-2008959993
- quadlet/unitfile: add a prepenUnitLine method
Requirements on networks should be inserted at the top of the
section so the user can override them.
Signed-off-by: jbtrystram <jbtrystram@redhat.com>
AppleHV accepts a max 36 bytes for mount tags. Instead of using the fully qualified path for the mount tag, SHA256 the path, and truncate the shasum to 36 bytes.
Also correctly escape dashes in mounted paths.
Signed-off-by: Ashley Cui <acui@redhat.com>
