These tests simply will not work under these conditions.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
When running as rootless, on a CgroupV1 host these tests all report:
`Error: pod stats is not supported in rootless mode without cgroups v2`
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
This should be addressed by PR
https://github.com/containers/podman/pull/8685
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
Nearly/all of the 'podman stats' tests fail on Fedora when
executing testing inside a container, and CGroupsV1 is used on the
host. The typical failure message is of the form `Error: unable to
load cgroup at /machine.slice/.../: cgroup deleted`.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
These tests fail with `Error: opening file `io.bfq.weight` for writing:
Permission denied: OCI permission denied`. Upon examination of the
VMs, it was found the kernel and OS lacks support for the `BFQ`
scheduler (which supplies the `weight` option). The only available
schedulers are `none` and `mq-deadline`.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
Previously automation always dropped the minor version number for
distributions. This was intended for presentation and conditional
simplicity. Bash does not support non-integer comparison natively.
With the release of version 20.10, supporting testing with it and
the LTS release (20.04) requires scripts to consider minor version
numbers for Ubuntu VMs. This is necessary because many times in
the past, some behaviors needed to be conditional on the release
version number.
With this commit, the images and embedded scripts/tooling uses an
altered format of `$UBUNTU_NAME', `$PRIOR_UBUNTU_NAME`, and (crucially)
`$OS_RELEASE_VER` and `$OS_REL_VER`. Any `.` characters appearing
in the official version (from `/etc/os-release`) are dropped, and
the result is concatenated.
For example the current Ubuntu LTS version is `20.04`. Prior to
this commit, `$OS_RELEASE_VER` would have been `20`. With this
change, `$OS_RELEASE_VER` will now show `2004`. Similarly `20.10`
is shown as `2010`.
Signed-off-by: Chris Evich <cevich@redhat.com>
Begin the migration of the image bindings for podman 3.0. this includes
the use of options for each binding. build was intentionally not
converted as I believe it needs more discussion before migration.
specifically, the build options themselves.
also noteworthly is that the remove image and remove images bindings
were merged into one. the remove images (or batch remove) has one
downside in that the errors return no longer adhere to http return
codes. this should be discussed and reimplemented in subsequent code.
Signed-off-by: baude <bbaude@redhat.com>
remove unused mirror from list of required host/ports: the host is
unreachable due to DNS misconfiguration, and it doesn't look like we
need it for anything anyway.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Change the log level when running as rootless when moving conmon to a
different cgroup.
Closes: https://github.com/containers/podman/issues/8721
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Currently we hard code TMPDIR environment variable to /var/tmp
if it is not set in the Environment. This causes TMPDIR environment
variable to be ignored if set in containers.conf.
This change now uses the host environment TMPDIR, followed by
containers.conf and then hard codes TMPDIR, if it was not set.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- run test: minor cleanup to .containerenv test. Basically,
make it do only two podman-runs (they're expensive) and
tighten up the results checks
- ps test: add ps -a --storage. Requires small tweak to
run_podman helper, so we can have "timeout" be an expected
result
- sdnotify test: workaround for #8718 (seeing MAINPID=xxx as
last output line instead of READY=1). As found by the
newly-added debugging echos, what we are seeing is:
MAINPID=103530
READY=1
MAINPID=103530
It's not supposed to be that way; it's supposed to be just
the first two. But when faced with reality, we must bend
to accommodate it, so let's accept READY=1 anywhere in
the output stream, not just as the last line.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #8284, due to my not having noticed #8096.
RHEL gating tests are failing again due to rhbz#1895105, the
one where we can't run journalctl rootless on RHEL. #8284 fixed
this for some RHEL builds of older podman, but I missed #8096
which added yet another logs test.
This brings us to three journalctl exceptions, which means
it gets complicated because I have to refactor it all.
**THIS IS NOT SUSTAINABLE**. We need some way to have a similar
setup in CI, with a permission-less rootless login, so we don't
add yet another logs test some day and discover, months later,
that it doesn't work on RHEL and then have to go into crisis
mode.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This change adds support for the `--filter` / `?filters` arguments on
the `podman volume prune` subcommand.
* Adds ParseFilterArgumentsIntoFilters helper for consistent
Filter string slice handling
* Adds `--filter` support to podman volume prune cli
* Adds `?filters...` support to podman volume prune api
* Updates apiv2 / e2e tests
Closes#8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
The podman events aren't read until the given timestamp if the
timestamp is in the future. It just reads all events until now
and exits afterwards.
This does not make sense and does not match docker. The correct
behavior is to read all events until the given time is reached.
This fixes a bug where the wrong event log file path was used
when running first time with a new storage location.
Fixes#8694
This also fixes the events api endpoint which only exited when
an error occurred. Otherwise it just hung after reading all events.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
podman image sign handles muti-arch images.
--all option to create signature for each manifest from the image manifest list.
Signed-off-by: Qi Wang <qiwan@redhat.com>
git-fetch a set of docker-compose examples
Add a mechanism for 'curl'ing to verify that service is up.
For each docker-compose directory:
1) test that it comes up
2) use 'curl' to confirm that the service is up
3) bring it back down
Signed-off-by: Ed Santiago <santiago@redhat.com>
do not check whether the specified ID is valid in the user namespace.
crun handles this case[1], so the check in Podman prevents to get to
the OCI runtime at all.
$ podman run --user 10:0 --uidmap 0:0:1 --rm -ti fedora:33 sh -c 'id; cat /proc/self/uid_map'
uid=10(10) gid=0(root) groups=0(root),65534(nobody)
10 0 1
[1] https://github.com/containers/crun/pull/556
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
CNI sometimes leaves Network information in /var/lib/cni/networks
when the system crashes or containers do not shut down properly.
This PR will cleanup these left over files, so that container engines
will get a clean enviroment when the system reboots.
Related to: https://github.com/containers/podman/issues/3759
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Network create could panic when used with a json body like this:
`{"Name":"net","IPAM":{"Config":[]}}`
The network scope for list and inspect should not be empty. It can
be swarm, global or local. We only support local networks so
hardcode this field to local.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Move all public key handling into one AuthMethod. Prioritize ssh-agent
keys over identity files.
* Cache server connection when tunneling, saves one RoundTrip on ssh
handshake
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Make the ContainerLogsOptions support two io.Writers,
one for stdout and the other for stderr. The logline already
includes the information to which Writer it has to be written.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
