It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We have a lot of systemd and quadlet based tests in the system tests.
This test doesn't seem very useful and it seems to flake so just remove
it.
Fixes#23480
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Emergency update to get pasta 03-26. Also gives us crun 1.14.4.
One unexplained difference: fc39 and rawhide now create:
/run/log/journal/SOMETHING/system.journal
...and the SOMETHING is o-rwx. This triggers journalctl to spit out a warning:
Hint: You are currently not seeing messages from the system.
Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
Pass -q to turn off this notice.
...which in turn causes ExitCleanly() to fail.
It is not clear who/what is creating this journal directory, or
why it allofasudden started just now. Workaround is to add -q
to journalctl in one test.
One more difference, another test now requires SYSLOG capability.
VM package info:
https://github.com/containers/automation_images/pull/342
Signed-off-by: Ed Santiago <santiago@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Test "podman start container by systemd" is failed on the system in
which rootless users don't have accessibility to journald. Therefore,
skip the part that reads journal with journalctl.
Signed-off-by: Tsubasa Watanabe <w.tsubasa@fujitsu.com>
Final push on RUN-1907. Commit 1 of 2.
This is the final set of test/e2e/*_test.go files to be
converted from Exit(0) to ExitCleanly().
This commit is a mix of automated string-replace with
manual revert-back: tests that did not pass with ExitCleanly()
are reverted back to Exit(0), so they will not show up as
diffs in this commit. When possible, I address those in
my next commit.
My goal was to make this commit a don't-bother-reviewing one
that will also pass tests (so as not to break git-bisect).
The next commit is the important one to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
[October 2022] While mucking around in this test, I noticed that
a test was being unnecessarily skipped in rootless. Reason was,
test was creating a /etc/systemd file, which it really shouldn't
have been doing anyway.
[Flash forward to June 2023] Ugh. This got complicated, so I
abandoned it. But it's flaking in CI, so one focus-push later,
here's everything that this PR fixes:
- create systemd unit file in proper (safe) path.
- create it *with proper podman options!!!* As in, the
whole --this --that --root --tmpdir options! Sheesh!
- use a pseudorandom service name, not just "redis"
- invoke systemctl/journalctl with --system or --user
as appropriate.
- remove unnecessary "bash -c"
- remove SkipIfRootless, but add SkipIfRemote
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- fix a typo that was resulting in a test being a NOP, and
add actual testing to it.
- fix two Expects() with incorrectly-ordered actual/expects
- remove leading whitespace from an It() test name
- To(BeTrue()) is evil. Wherever possible, replace it with
useful string or field checks. When not possible, use
the annotation field to indicate what failed. I got
carried away here, #sorrynotsorry
- remove unused system-test code
Signed-off-by: Ed Santiago <santiago@redhat.com>
...at least as many as possible. "run/exec -it" make no sense
in a CI environment; I believe the vast majority of these are
the result of fingers typing on autopilot, then copy/pasting
cascades from those. This PR gets rid of as many -it/-ti as
possible. Some are still needed for testing purposes.
Y'all have no idea how much I hate #10927 (the "no logs from conmon"
flake). This does not fix the underlying problem, nor does it even
eliminate the flake (The "exec terminal doesn't hang" test needs
to keep the -ti flag, and that's one of the most popular flakers).
But this at least reduces the scope of the problem. It also removes
a ton of nasty orange "input device is not a TTY" warnings from logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Red Hat registry is too unreliable. (As of this writing
in January 2023, quay.io is not much better, but this is
a new flake. Ubi has been flaking for a year or more).
Instead of UBI, use the new systemd-image added to system tests
in #16814. Since this reduces the number of cached images,
a few unrelated tests (image count) need to be tweaked.
And, sigh, Fedora systemd colorizes boot messages by default,
causing a failure where we don't see an expected Reached Target
message. I don't want to rely on ASCII formatting codes, so
I've updated the build-systemd-image script so it disables
systemd colors, and have built a new systemd-image:20230106.
Made a few small usability improvements to the script as well.
Closes: #16695
Signed-off-by: Ed Santiago <santiago@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We've had some oopsies in system tests:
podman foo bar
run podman foo bar
...all of which should be run_podman with underscore. Those
have been passing because /usr/bin/podman is the fallback
from $PATH. In those (few) cases, we haven't actually been
testing the podman we should be testing.
Solution: nuke /usr/bin/podman and podman-remote before
invoking system and unit tests. As an extra level of
paranoia, check for other podmans in $PATH - if any
exist, bail out with a fatal error.
Also: in a few cases where runner.sh invokes podman for
containerized something-something, run bin/podman instead
of podman from $PATH.
Also: fix existing dependencies on /usr/bin/podman
Signed-off-by: Ed Santiago <santiago@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Replace `multi-user.target` with `default.target` across the code base.
It seems like the multi-user one is not available for (rootless) users
on F35 anymore is causing issues in all kinds of ways, for instance,
enabling the podman.service or generated systemd units.
Fixes: #12438
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
improve the heuristic to detect the scope that was created for the container.
This is necessary with systemd running as PID 1, since it moves itself
to a different sub-cgroup, thus stats would not account for other
processes in the same container.
Closes: https://github.com/containers/podman/issues/12400
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Previously this test used an ad-hoc timeout mechanism to synchronize
with output of the container ID. However, depending on runtime
conditions this may not correctly correspond with complete startup
of the systemd process. Consequently this test fails under some
conditions with an error like:
`System has not been booted with systemd as init system (PID 1). Can't
operate. Failed to connect to bus: Host is down`
Fix this by using the more appropriate `WaitContainerReady()`
against output from system startup, close to finalization. In this way,
the test status command cannot run until systemd is fully operational.
Signed-off-by: Chris Evich <cevich@redhat.com>
These tests were originally enabled in a situation where CI provided
false-positive results. Now that has been corrected, these tests all
fail under a CGv1 container environment with the error:
```
Error: unable to load cgroup at
/machine.slice/libpod-e4f...086.scope/libpod_parent/libpod-fbd...425:
cgroup deleted
```
This commit simply disables the tests under this specific environment.
Signed-off-by: Chris Evich <cevich@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
when looking up the container cgroup, ignore named hierarchies since
containers running systemd as payload will create a sub-cgroup and
move themselves there.
Closes: https://github.com/containers/podman/issues/10602
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
so that the PIDFile can be accessed also without being in the rootless
user namespace.
Closes: https://github.com/containers/podman/issues/8506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Followon to #7965 (mirror registry). mirror.gcr.io doesn't
cache all the images we need, and I can't find a way to
add to its cache, so let's just use quay.io for those
images that it can't serve.
Tools used:
skopeo copy --all docker://docker.io/library/alpine:3.10.2 \
docker://quay.io/libpod/alpine:3.10.2
...and also:
docker.io/library/alpine:3.2
docker.io/library/busybox:latest
docker.io/library/busybox:glibc
docker.io/library/busybox:1.30.1
docker.io/library/redis:alpine
docker.io/libpod/alpine-with-bogus-seccomp:label
docker.io/libpod/alpine-with-seccomp:label
docker.io/libpod/alpine_healthcheck:latest
docker.io/libpod/badhealthcheck:latest
Since most of those were new quay.io/libpod images, they required
going in through the quay.io GUI, image, settings, Make Public.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The systemd test was inaccurately being skipped when a userns env. var.
flag was set. At best this is confusing to new developers, and at worse
it actively blocks an otherwise legitimate class of tests. Improve the
accuracy of skip-logic by adding/using a purpose built set of
functions.
Signed-off-by: Chris Evich <cevich@redhat.com>
The system defaults /run to "exec" mode, and we default --read-only
mounts on /run to "exec", so --systemd should follow suit.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This allows us to determine if the container auto-detected that
systemd was in use, and correctly activated systemd integration.
Use this to wire up some integration tests to verify that systemd
integration is working properly.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
fedora removed the systemd package from its standard container image causing our systemd pid1 test to fail. Replacing usage of fedora to ubi-init.
adding ubi images to the cache for local tests.
also, remove installation of test/policy.json to the system wide /etc/containers
Signed-off-by: Brent Baude <bbaude@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
