The `tag` parameter of the compat `images/create` endpoint can be both,
a tag and a digest. Fix parsing of the parameter to detect digests and
use the appropriate `@` separator.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1884668
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when creating a container using the compat endpoint, the interactive bool was being hard set to false and ignoring the user's input.
Signed-off-by: baude <bbaude@redhat.com>
id is the last image id from the set of id's returned via the images
stanza.
id may be deprecated in a future version of the API
Created test_rest_v2_0_0.py to reflect the bump in the API Version.
Fixes#7686
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman and podman-remote do not exactly match as the lower layer code
checks if the output is destined for a TTY before creating the progress
bars. A future PR for containers/images could change this behavior.
Fixes#7543
Tested with:
$ (echo '# start'; podman-remote pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
$ (echo '# start'; podman pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
* API-Version header now Major.Minor to support tools parsing this
header
* Libpod Version updated to 2.0.0 to reflect changes in API field
values
* API-Version and Libpod-API-Version headers are now included in all
results
Fixes#7327
* Header support tested against goland 2020.2 and
https://www.jetbrains.com/help/idea/docker.html plugin
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Do not wait for events to occur before writing the OK header.
Events can take an unknown amount of time to occur and clients
do not need to wait until then to know if the connection is
good.
Fixes: #7263
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Refactor/Rename channel.WriteCloser() to encapsulate the channel
* Refactor build endpoint to "live" stream buildah output channels
over API rather then buffering output
* Refactor bindings/tunnel build because endpoint changes
* building tar file now in bindings rather then depending on
caller
* Cleanup initiating extra image engine
* Remove setting fields to zero values (less noise in code)
* Update tests to support remote builds
Fixes#7136Fixes#7137
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Invert the branch logic to match the comment. Docker seems to wait for
the container while Podman does not.
Enable the remote-disabled system test as well.
Fixes: #7135
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support loading and saving tarballs with more than one image.
Add a new `/libpod/images/export` endpoint to the rest API to
allow for exporting/saving multiple images into an archive.
Note that a non-release version of containers/image is vendored.
A release version must be vendored before cutting a new Podman
release. We force the containers/image version via a replace in
the go.mod file; this way go won't try to match the versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the filter option to the libpod endpoint.
Add support for the name filter on the docker endpoint.
Add apiv2 tests for the network list endpoints.
Enable podman network integration tests for remote.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add support for generating systemd units
via the api and podman-remote.
Change the GenerateSystemdReport type to return the
units as map[string]string with the unit name as key.
Add `--format` flag to `podman generate systemd`
to allow the output to be formatted as json.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The APIv2 pod endpoints that operate on multiple containers, such
as Start, Kill, Pause, Unpause, do not report errors encountered
by individual containers, because they incorrectly assume that
any error is fatal. The documentation for the Libpod API calls
notes, however, that ErrPodPartialFail will *always* be returned
if any container failed; so we need to ignore that error and
continue to collating and returning container errors.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Our previous flow was to perform a hijack before passing a
connection into Libpod, and then Libpod would attach to the
container's attach socket and begin forwarding traffic.
A problem emerges: we write the attach header as soon as the
attach complete. As soon as we write the header, the client
assumes that all is ready, and sends a Start request. This Start
may be processed *before* we successfully finish attaching,
causing us to lose output.
The solution is to handle hijacking inside Libpod. Unfortunately,
this requires a downright extensive refactor of the Attach and
HTTP Exec StartAndAttach code. I think the result is an
improvement in some places (a lot more errors will be handled
with a proper HTTP error code, before the hijack occurs) but
other parts, like the relocation of printing container logs, are
just *bad*. Still, we need this fixed now to get CI back into
good shape...
Fixes#7195
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Listing images has shown increasing performance penalties with an
increasing number of images. Unless `--all` is specified, Podman
will filter intermediate images. Determining intermediate images
has been done by finding (and comparing!) parent images which is
expensive. We had to query the storage many times which turned it
into a bottleneck.
Instead, create a layer tree and assign one or more images to nodes that
match the images' top layer. Determining the children of an image is
now exponentially faster as we already know the child images from the
layer graph and the images using the same top layer, which may also be
considered child images based on their history.
On my system with 510 images, a rootful image list drops from 6 secs
down to 0.3 secs.
Also use the tree to compute parent nodes, and to filter intermediate
images for pruning.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
even though the official documentation suggests that application/x-tar should be used for tar files, it seems docker-compose uses application/tar. we now accept them and issue a warning.
Fixes: #7185
Signed-off-by: Brent Baude <bbaude@redhat.com>
`podman image search` returned wrong results for the image "Description" as
it was mapped to the wrong field ("ID") in the search results.
Basically cherry-picked into the api from
commit cf5c63b5c492e41d72b6e3b6d75b5f39b0a957fd.
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
Currently you can only specify multiple character for image names
when executing podman-remote commit
podman-remote commit a b
Will complete, but will save the image without a name.
podman-remote commit a bb
Works.
This PR fixes and now returns an error if the user doees not specify an
image name to commit to.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are returning bogus data in podman-remote images --format json.
This change will match the same data returned my podman images --format json.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
