tui_win_info::refresh_window simply calls wrefresh, which internally
does a doupdate.
This redraws the source background window without the source pad.
Then prefresh of the source pad draws the actual source code on top,
which flickers.
By changing this to wnoutrefresh, the actual drawing on the screen is
only done once in the following prefresh, without flickering.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Call wnoutrefresh instead of tui_win_info::refresh_window.
There a 2 spaces between the numbers and source code, but only one of
them was redrawn.
So if you increase the source window height, the second space keeps the
character of the border rectangle.
With this both spaces are redrawn, so the border rectangle character is
overwritten.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-source.c (tui_source_window::show_line_number):
Redraw second space after line number.
The smaxrow and smaxcol parameters of prefresh are the bottom right corner
of the text area inclusive, not exclusive.
And if the source window grows bigger in height, the pad has to grow as
well.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
PR tui/26927
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Fix source pad size in prefresh.
(tui_source_window_base::show_source_content): Grow source pad
if necessary.
While working on PR26935 I noticed that when running test-case
gdb.base/morestack.exp with target board unix/-m32/-fPIE/-pie and ld linker,
I get this linetable fragment for morestack.S using readelf -wL:
...
CU: ../../../../libgcc/config/i386/morestack.S:
Line number Starting address View Stmt
109 0xc9c x
...
838 0xe03 x
- 0xe04
636 0 x
637 0x3 x
- 0x4
...
but with "maint info line-table" I get:
...
INDEX LINE ADDRESS IS-STMT
0 END 0x00000004 Y
1 109 0x00000c9c Y
...
110 838 0x00000e03 Y
111 END 0x00000e04 Y
...
So, apparently the entries with addresses 0x0 and 0x3 are filtered out
because the addresses are out of range, but the same doesn't happen with the
end-of-seq terminator.
Fix this by filtering out end-of-seq terminators that do not actually
terminate anything.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-01-04 Tom de Vries <tdevries@suse.de>
* buildsym.c (buildsym_compunit::record_line): Filter out end-of-seq
terminators that do not terminate anything.
gdb/testsuite/ChangeLog:
2021-01-04 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: New file.
I spent a lot of time reading infrun debug logs recently, and I think
they could be made much more readable by being indented, to clearly see
what operation is done as part of what other operation. In the current
format, there are no visual cues to tell where things start and end,
it's just a big flat list. It's also difficult to understand what
caused a given operation (e.g. a call to resume_1) to be done.
To help with this, I propose to add the new scoped_debug_start_end
structure, along with a bunch of macros to make it convenient to use.
The idea of scoped_debug_start_end is simply to print a start and end
message at construction and destruction. It also increments/decrements
a depth counter in order to make debug statements printed during this
range use some indentation. Some care is taken to handle the fact that
debug can be turned on or off in the middle of such a range. For
example, a "set debug foo 1" command in a breakpoint command, or a
superior GDB manually changing the debug_foo variable.
Two macros are added in gdbsupport/common-debug.h, which are helpers to
define module-specific macros:
- scoped_debug_start_end: takes a message that is printed both at
construction / destruction, with "start: " and "end: " prefixes.
- scoped_debug_enter_exit: prints hard-coded "enter" and "exit"
messages, to denote the entry and exit of a function.
I added some examples in the infrun module to give an idea of how it can
be used and what the result looks like. The macros are in capital
letters (INFRUN_SCOPED_DEBUG_START_END and
INFRUN_SCOPED_DEBUG_ENTER_EXIT) to mimic the existing SCOPE_EXIT, but
that can be changed if you prefer something else.
Here's an excerpt of the debug
statements printed when doing "continue", where a displaced step is
started:
[infrun] proceed: enter
[infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT
[infrun] global_thread_step_over_chain_enqueue: enqueueing thread Thread 0x7ffff75a5640 (LWP 2289301) in global step over chain
[infrun] start_step_over: enter
[infrun] start_step_over: stealing global queue of threads to step, length = 1
[infrun] start_step_over: resuming [Thread 0x7ffff75a5640 (LWP 2289301)] for step-over
[infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [Thread 0x7ffff75a5640 (LWP 2289301)] at 0x5555555551bd
[displaced] displaced_step_prepare_throw: displaced-stepping Thread 0x7ffff75a5640 (LWP 2289301) now
[displaced] prepare: selected buffer at 0x5555555550c2
[displaced] prepare: saved 0x5555555550c2: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50
[displaced] amd64_displaced_step_copy_insn: copy 0x5555555551bd->0x5555555550c2: c7 45 fc 00 00 00 00 eb 13 8b 05 d4 2e 00 00 83
[displaced] displaced_step_prepare_throw: prepared successfully thread=Thread 0x7ffff75a5640 (LWP 2289301), original_pc=0x5555555551bd, displaced_pc=0x5555555550c2
[displaced] resume_1: run 0x5555555550c2: c7 45 fc 00
[infrun] infrun_async: enable=1
[infrun] prepare_to_wait: prepare_to_wait
[infrun] start_step_over: [Thread 0x7ffff75a5640 (LWP 2289301)] was resumed.
[infrun] operator(): step-over queue now empty
[infrun] start_step_over: exit
[infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop
[infrun] proceed: resuming Thread 0x7ffff7da7740 (LWP 2289296)
[infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7da7740 (LWP 2289296)] at 0x7ffff7f7d9b7
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: resuming Thread 0x7ffff7da6640 (LWP 2289300)
[infrun] resume_1: thread Thread 0x7ffff7da6640 (LWP 2289300) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0).
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: [Thread 0x7ffff75a5640 (LWP 2289301)] resumed
[infrun] proceed: resuming Thread 0x7ffff6da4640 (LWP 2289302)
[infrun] resume_1: thread Thread 0x7ffff6da4640 (LWP 2289302) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0).
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop
[infrun] proceed: exit
We can easily see where the call to `proceed` starts and end. We can
also see why there are a bunch of resume_1 calls, it's because we are
resuming threads, emulating all-stop on top of a non-stop target.
We also see that debug statements nest well with other modules that have
been migrated to use the "new" debug statement helpers (because they all
use debug_prefixed_vprintf in the end. I think this is desirable, for
example we could see the debug statements about reading the DWARF info
of a library nested under the debug statements about loading that
library.
Of course, modules that haven't been migrated to use the "new" helpers
will still print without indentations. This will be one good reason to
migrate them.
I think the runtime cost (when debug statements are disabled) of this is
reasonable, given the improvement in readability. There is the cost of
the conditionals (like standard debug statements), one more condition
(if (m_must_decrement_print_depth)) and the cost of constructing a stack
object, which means copying a fews pointers.
Adding the print in fetch_inferior_event breaks some tests that use "set
debug infrun", because it prints a debug statement after the prompt. I
adapted these tests to cope with it, by using the "-prompt" switch of
gdb_test_multiple to as if this debug statement is part of the expected
prompt. It's unfortunate that we have to do this, but I think the debug
print is useful, and I don't want a few tests to get in the way of
adding good debug output.
gdbsupport/ChangeLog:
* common-debug.h (debug_print_depth): New.
(struct scoped_debug_start_end): New.
(scoped_debug_start_end): New.
(scoped_debug_enter_exit): New.
* common-debug.cc (debug_prefixed_vprintf): Print indentation.
gdb/ChangeLog:
* debug.c (debug_print_depth): New.
* infrun.h (INFRUN_SCOPED_DEBUG_START_END): New.
(INFRUN_SCOPED_DEBUG_ENTER_EXIT): New.
* infrun.c (start_step_over): Use
INFRUN_SCOPED_DEBUG_ENTER_EXIT.
(proceed): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT and
INFRUN_SCOPED_DEBUG_START_END.
(fetch_inferior_event): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT.
gdbserver/ChangeLog:
* debug.cc (debug_print_depth): New.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Expect infrun debug print after
prompt.
* gdb.threads/ia64-sigill.exp: Likewise.
* gdb.threads/watchthreads-reorder.exp: Likewise.
Change-Id: I7c3805e6487807aa63a1bae318876a0c69dce949
The code in print_target_wait_results uses a single call to debug_printf
in order to make sure a single timestamp is emitted, despite printing
multiple lines. The result is:
941502.043284 [infrun] target_wait (-1.0.0, status) =
[infrun] 649832.649832.0 [process 649832],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
I find this decision a bit counter productive, because it messes up the
alignment of the three lines. We don't care that three (slightly
different) timestamps are printed.
I suggest to change this function to use infrun_debug_printf, with this
result:
941601.425771 [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
941601.425824 [infrun] print_target_wait_results: 651481.651481.0 [process 651481],
941601.425867 [infrun] print_target_wait_results: status->kind = stopped, signal = GDB_SIGNAL_TRAP
Note that the current code only prints the waiton_ptid as a string
between square brackets if pid != -1. I don't think this complexity is
needed in a debug print. I made it so it's always printed, which I
think results in a much simpler function.
gdb/ChangeLog:
* infrun.c (print_target_wait_results): Use infrun_debug_printf.
Change-Id: I817bd10286b8e641a6c751ac3a1bd1ddf9b18ce0
New in v2:
- implement by modifying vprintf_unfiltered rather than
debug_prefixed_vprintf.
I tried enabling debug timestamps, and realized that it doesn't play
well with the revamp of the debug printouts I've been working on:
$ ./gdb -q -nx --data-directory=data-directory -ex "set debug infrun" -ex "set debug timestamp" a.out
Reading symbols from a.out...
(gdb) start
Temporary breakpoint 1 at 0x1131: file test.c, line 2.
Starting program: /home/smarchi/build/binutils-gdb-all-targets/gdb/a.out
939897.769338 [infrun] infrun_async:
939897.769383 enable=1
939897.769409
939897.915218 [infrun] proceed:
939897.915281 addr=0x7ffff7fd0100, signal=GDB_SIGNAL_0
939897.915315
939897.915417 [infrun] start_step_over:
939897.915464 stealing global queue of threads to step, length = 0
939897.915502
939897.915567 [infrun] operator():
939897.915601 step-over queue now empty
939897.915633
939897.915690 [infrun] proceed:
939897.915729 resuming process 636244
939897.915768
939897.915892 [infrun] resume_1:
939897.915954 step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [process 636244] at 0x7ffff7fd0100
939897.915991
939897.916119 [infrun] prepare_to_wait:
939897.916153 prepare_to_wait
939897.916201
939897.916661 [infrun] target_wait (-1.0.0, status) =
[infrun] 636244.636244.0 [process 636244],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
939897.916734 [infrun] handle_inferior_event:
939897.916768 status->kind = stopped, signal = GDB_SIGNAL_TRAP
939897.916799
This is due to debug_prefixed_vprintf being implemented as three
separate calls to debug_printf / debug_vprintf. Each call gets its own
timestamp and newline, curtesy of vprintf_unfiltered.
My first idea was to add a "line_start" parameter to debug_vprintf,
allowing the caller to say whether the print is the start of the line.
A debug timestamp would only be printed if line_start was true.
However, that was much more invasive than the simple fix implemented in
this patch.
My second idea was to make debug_prefixed_vprintf use string_printf and
issue a single call to debug_printf. That would however prevent future
use of styling in the debug messages.
What is implemented in this patch is the same as is implemented in
GDBserver: the timestamp-printing code in GDB tracks whether the last
debug output ended with a newline. If so, it prints a timestamp on the
next debug output.
After the fix, it looks like this:
$ ./gdb -q -nx --data-directory=data-directory -ex "set debug infrun" -ex "set debug timestamp" a.out
Reading symbols from a.out...
(gdb) start
Temporary breakpoint 1 at 0x1131: file test.c, line 2.
Starting program: /home/smarchi/build/binutils-gdb-all-targets/gdb/a.out
941112.135662 [infrun] infrun_async: enable=1
941112.279930 [infrun] proceed: addr=0x7ffff7fd0100, signal=GDB_SIGNAL_0
941112.280064 [infrun] start_step_over: stealing global queue of threads to step, length = 0
941112.280125 [infrun] operator(): step-over queue now empty
941112.280194 [infrun] proceed: resuming process 646228
941112.280332 [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [process 646228] at 0x7ffff7fd0100
941112.280480 [infrun] prepare_to_wait: prepare_to_wait
941112.281004 [infrun] target_wait (-1.0.0, status) =
[infrun] 646228.646228.0 [process 646228],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
941112.281078 [infrun] handle_inferior_event: status->kind = stopped, signal = GDB_SIGNAL_TRAP
gdb/ChangeLog:
* utils.c (vfprintf_unfiltered): Print timestamp only when
previous debug output ended with a newline.
Change-Id: Idcfe3acc7e3d0f526a5f0a43a5e0884bf93c41ae
When I run some tests in gdb.server (fox example
gdb.server/ext-attach.exp) on Ubuntu 20.04 with separate debug info for
glibc installed, they often time out. This is because GDB reads the
debug info through the remote protocol which is particularly slow:
attach 316937
Attaching to program: /home/smarchi/build/binutils-gdb-all-targets/gdb/testsuite/outputs/gdb.server/ext-attach/ext-attach, process 316937
Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading symbols from target:/lib/x86_64-linux-gnu/libc.so.6...
Reading /lib/x86_64-linux-gnu/libc-2.31.so from remote target...
Reading /lib/x86_64-linux-gnu/.debug/libc-2.31.so from remote target...
Reading /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so from remote target...
FAIL: gdb.server/ext-attach.exp: attach to remote program 1 (timeout)
This is avoided in gdbserver boards by adding "set sysroot" to GDBFLAGS
(see boards/local-board.exp), which makes GDB read files from the local
filesystem. But gdb.server tests spawn GDBserver directly, so are ran
even when using the default unix board, where the "set sysroot" isn't
used.
Modify these tests to append "set sysroot" to the GDBFLAGS, a bit like
lib/local-board.exp does.
One special case is gdb.server/sysroot.exp, whose intent is to test
different "set sysroot" values. For this one, increase the timeout when
testing the "target:" sysroot.
gdb/testsuite/ChangeLog:
* gdb.server/abspath.exp: Append "set sysroot" to GDBFLAGS.
* gdb.server/connect-without-multi-process.exp: Likewise.
* gdb.server/exit-multiple-threads.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.server/ext-restart.exp: Likewise.
* gdb.server/ext-run.exp: Likewise.
* gdb.server/ext-wrapper.exp: Likewise.
* gdb.server/multi-ui-errors.exp: Likewise.
* gdb.server/no-thread-db.exp: Likewise.
* gdb.server/reconnect-ctrl-c.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Likewise.
* gdb.server/server-kill.exp: Likewise.
* gdb.server/server-run.exp: Likewise.
* gdb.server/solib-list.exp: Likewise.
* gdb.server/stop-reply-no-thread.exp: Likewise.
* gdb.server/wrapper.exp: Likewise.
* gdb.server/sysroot.exp: Increase timeout when testing the
target: sysroot.
Change-Id: I7451bcc737f90e2cd0b977e9f09da3710774b0bf
I think this sequence of commands can be replaced with clean_restart.
gdb/testsuite/ChangeLog:
* gdb.server/server-run.exp: Use clean_restart.
Change-Id: If8c3eaa89f4ee58901282f5f1d5d4e1100ce7ac5
I think the sequence of commands here could be replaced with
clean_restart. The test starts with GDB not started, so it should not
be started when we reach gdb_skip_xml_test.
gdb/testsuite/ChangeLog:
* gdb.server/ext-run.exp: Use clean_restart.
Change-Id: I8c033bad6c52f3d58d6aa377b8355fc633c7aede
This test uses prepare_for_testing, then does a clean_restart for each
test configuration. prepare_for_testing does a build_executable plus a
clean_restart. So the clean_restart inside prepare_for_testing is done
for nothing.
Change prepare_for_testing to just build_executable to avoid the
unnecessary clean_restart.
gdb/testsuite/ChangeLog:
* gdb.server/stop-reply-no-thread.exp: Use build_executable
instead of prepare_for_testing.
Change-Id: I8b2a2e90353c57c39c49a3665083331b4882fdd0
I think this sequence of commands can be replaced by clean_restart,
despite what the comment says, as long as we don't use the `binfile`
argument to clean_restart.
gdb/testsuite/ChangeLog:
* gdb.server/solib-list.exp: Use clean_restart.
Change-Id: I4930564c50a1865cbffe0d660a4296c9d2158084
While working on PR26935 I noticed that the test-case requires the gold
linker, but doesn't really need it.
The -fuse-ld=gold was added to support the printf in the test-case, which
prints some information but is not otherwise needed for the test-case.
Fix this by removing the printf and the corresponding -fuse-ld=gold.
Tested on x86_64-linux.
Also checked that the test still fails when the fix from the commit that added
the test-case is reverted.
gdb/testsuite/ChangeLog:
2021-01-04 Tom de Vries <tdevries@suse.de>
* gdb.base/morestack.c: Remove printf.
* gdb.base/morestack.exp: Don't use -fuse-ld=gold.
The following patch drops the overloading going on with the trad_frame_saved_reg
struct and defines a new struct with a KIND enum and a union of different
fields.
The new struct looks like this:
struct trad_frame_saved_reg
{
setters/getters
...
private:
trad_frame_saved_reg_kind m_kind;
union {
LONGEST value;
int realreg;
LONGEST addr;
const gdb_byte *value_bytes;
} m_reg;
};
And the enums look like this:
/* Describes the kind of encoding a stored register has. */
enum class trad_frame_saved_reg_kind
{
/* Register value is unknown. */
UNKNOWN = 0,
/* Register value is a constant. */
VALUE,
/* Register value is in another register. */
REALREG,
/* Register value is at an address. */
ADDR,
/* Register value is a sequence of bytes. */
VALUE_BYTES
};
The patch also adds setters/getters and updates all the users of the old
struct.
It is worth mentioning that due to the previous overloaded nature of the
fields, some tdep files like to store negative offsets and indexes in the ADDR
field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may
be better supported by a new enum entry.
I have not addressed those cases in this patch to prevent unwanted breakage,
given I have no way to test some of the targets. But it would be nice to
clean those up eventually.
The change to frame-unwind.* is to constify the parameter being passed to the
unwinding functions, given we now accept a "const gdb_byte *" for value bytes.
Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with
--enable-targets=all.
gdb/ChangeLog:
2021-01-04 Luis Machado <luis.machado@linaro.org>
Update all users of trad_frame_saved_reg to use the new member
functions.
Remote all struct keywords from declarations of trad_frame_saved_reg
types, except on forward declarations.
* aarch64-tdep.c: Update.
* alpha-mdebug-tdep.c: Update.
* alpha-tdep.c: Update.
* arc-tdep.c: Update.
* arm-tdep.c: Update.
* avr-tdep.c: Update.
* cris-tdep.c: Update.
* csky-tdep.c: Update.
* frv-tdep.c: Update.
* hppa-linux-tdep.c: Update.
* hppa-tdep.c: Update.
* hppa-tdep.h: Update.
* lm32-tdep.c: Update.
* m32r-linux-tdep.c: Update.
* m32r-tdep.c: Update.
* m68hc11-tdep.c: Update.
* mips-tdep.c: Update.
* moxie-tdep.c: Update.
* riscv-tdep.c: Update.
* rs6000-tdep.c: Update.
* s390-linux-tdep.c: Update.
* s390-tdep.c: Update.
* score-tdep.c: Update.
* sparc-netbsd-tdep.c: Update.
* sparc-sol2-tdep.c: Update.
* sparc64-fbsd-tdep.c: Update.
* sparc64-netbsd-tdep.c: Update.
* sparc64-obsd-tdep.c: Update.
* sparc64-sol2-tdep.c: Update.
* tilegx-tdep.c: Update.
* v850-tdep.c: Update.
* vax-tdep.c: Update.
* frame-unwind.c (frame_unwind_got_bytes): Make parameter const.
* frame-unwind.h (frame_unwind_got_bytes): Likewise.
* trad-frame.c: Update.
Remove TF_REG_* enum.
(trad_frame_alloc_saved_regs): Add a static assertion to check for
a trivially-constructible struct.
(trad_frame_reset_saved_regs): Adjust to use member function.
(trad_frame_value_p): Likewise.
(trad_frame_addr_p): Likewise.
(trad_frame_realreg_p): Likewise.
(trad_frame_value_bytes_p): Likewise.
(trad_frame_set_value): Likewise.
(trad_frame_set_realreg): Likewise.
(trad_frame_set_addr): Likewise.
(trad_frame_set_unknown): Likewise.
(trad_frame_set_value_bytes): Likewise.
(trad_frame_get_prev_register): Likewise.
* trad-frame.h: Update.
(trad_frame_saved_reg_kind): New enum.
(struct trad_frame_saved_reg) <addr, realreg, data>: Remove.
<m_kind, m_reg>: New member fields.
<set_value, set_realreg, set_addr, set_unknown, set_value_bytes>
<kind, value, realreg, addr, value_bytes, is_value, is_realreg>
<is_addr, is_unknown, is_value_bytes>: New member functions.
In struct dynamic_prop the members kind and data were renamed to m_kind and
m_data.
And flag_upper_bound_is_count is actually in bounds directly, not in its
high member.
gdb/ChangeLog:
2021-01-02 Hannes Domani <ssbssa@yahoo.de>
* gdb-gdb.py.in: Fix main_type.flds_bnds.bounds pretty printer.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
This commit adjusts GDB's copyright.py script, following two past changes:
- gdb/gdbserver/ being move to the toplevel directory;
- gdb/common/ being renamed to gdbsupport/.
gdb/ChangeLog:
* copyright.py (get_update_list): Add "gdbserver" and "gdbsupport"
to the list of directories to update.
As a results of the rotation, this introduces a new file which
needed to be added to DJGPP's fnchange.lst.
gdb/ChangeLog
* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2020.
Rust 1.49 was released today, and it includes some library changes
which caused some gdb.rust tests to fail. This patch adapts the test
suite to the new output. I also verified that this continues to work
with Rust 1.48.
gdb/testsuite/ChangeLog
2020-12-31 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Update output for Rust 1.49.
Fix a bug in the test where we were missing "additional_flags=",
causing -gstatement-frontiers not to be passed to the compiler.
The issue was introduced in
eb24648c453c28f2898fb599311ba004394a8b41 ("Fix gdb.cp/step-and-next-inline.exp with Clang").
gdb/testsuite:
2020-12-31 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.cp/step-and-next-inline.exp: Fix test case.
Use with_test_prefix to de-duplicate test names.
gdb/testsuite/ChangeLog:
* gdb.python/py-frame-args.exp: De-duplicate test names.
Change-Id: I5cc8bee692a0d071cb78258aca80ea642e00e7a8
The objects returned by FrameDecorator.frame_args need to implement a
method named symbol, not argument.
gdb/doc/ChangeLog:
2020-12-29 Hannes Domani <ssbssa@yahoo.de>
* python.texi (Frame Decorator API): Fix method name.
The MULTI_SUBSCRIPT code in evaluate_subexp_standard has a comment
saying that perhaps the EVAL_SKIP handling is incorrect. This patch
simplifies this code. In particular, it precomputes all the indices
in a separate loop and removes some complicated flow-control.
Tested using the gdb.modula2 and gdb.dlang test suites, as these are
the only parsers that emit MULTI_SUBSCRIPT.
gdb/ChangeLog
2020-12-27 Tom Tromey <tom@tromey.com>
* eval.c (evaluate_subexp_standard) <case MULTI_SUBSCRIPT>:
Simplify.
In PR gdb/27059 an issue was discovered where GDB would sometimes
trigger undefined behaviour in the form of signed integer overflow.
The problem here is that GDB was reading random garbage from the
inferior memory space, assuming this data was valid, and performing
arithmetic on it.
This bug raises an interesting general problem with GDB's DWARF
expression evaluator, which is this:
We currently assume that the DWARF expressions being evaluated are
well formed, and well behaving. As an example, this is the expression
that the bug was running into problems on, this was used as the
expression for a DW_AT_byte_stride of a DW_TAG_subrange_type:
DW_OP_push_object_address;
DW_OP_plus_uconst: 88;
DW_OP_deref;
DW_OP_push_object_address;
DW_OP_plus_uconst: 32;
DW_OP_deref;
DW_OP_mul
Two values are read from the inferior and multiplied together. GDB
should not assume that any value read from the inferior is in any way
sane, as such the implementation of DW_OP_mul should be guarding
against overflow and doing something semi-sane here.
However, it turns out that the original bug PR gdb/27059, is hitting a
more specific case, which doesn't require changes to the DWARF
expression evaluator, so I'm going to leave the above issue for
another day.
In the test mentioned in the bug GDB is actually trying to resolve the
dynamic type of a Fortran array that is NOT allocated. A
non-allocated Fortran array is one that does not have any data
allocated for it yet, and even the upper and lower bounds of the array
are not yet known.
It turns out that, at least for gfortran compiled code, the data
fields that describe the byte-stride are not initialised until the
array is allocated.
This leads me to the following conclusion: GDB should not try to
resolve the bounds, or stride information for an array that is not
allocated (or not associated, a similar, but slightly different
Fortran feature). Instead, each of these properties should be set to
undefined if the array is not allocated (or associated).
That is what this commit does. There's a new flag that is passed
around during the dynamic array resolution. When this flag is true
the dynamic properties are resolved using the DWARF expressions as
they currently are, but when this flag is false the expressions are
not evaluated, and instead the properties are set to undefined.
gdb/ChangeLog:
PR gdb/27059
* eval.c (evaluate_subexp_for_sizeof): Handle not allocated and
not associated arrays.
* f-lang.c (fortran_adjust_dynamic_array_base_address_hack): Don't
adjust arrays that are not allocated/associated.
* gdbtypes.c (resolve_dynamic_range): Update header comment. Add
new parameter which is used to sometimes set dynamic properties to
undefined.
(resolve_dynamic_array_or_string): Update header comment. Add new
parameter which is used to guard evaluating dynamic properties.
Resolve allocated/associated properties first.
gdb/testsuite/ChangeLog:
PR gdb/27059
* gdb.dwarf2/dyn-type-unallocated.c: New file.
* gdb.dwarf2/dyn-type-unallocated.exp: New file.
Adds the allocated and associated dynamic properties into the output
of the 'maintenance print type' command.
gdb/ChangeLog:
* gdbtypes (recursive_dump_type): Include allocated and associated
properties.
When called with an array type of unknown dimensions,
is_scalar_type_recursive ended up comparing uninitialized values.
This was picked up by the following compiler warning:
CXX gdbtypes.o
/binutils-gdb/gdb/gdbtypes.c: In function int is_scalar_type_recursive(type*):
/binutils-gdb/gdb/gdbtypes.c:3670:38: warning: high_bound may be used uninitialized in this function [-Wmaybe-uninitialized]
3670 | return high_bound == low_bound && is_scalar_type_recursive (elt_type);
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/binutils-gdb/gdb/gdbtypes.c:3670:38: warning: low_bound may be used uninitialized in this function [-Wmaybe-uninitialized]
This patch makes sure that when dealing with an array of unknown size
(or an array of more than 1 element), is_scalar_type_recursive returns
false.
gdb/ChangeLog:
* gdbtypes.c (is_scalar_type_recursive): Prevent comparison
between uninitialized values.
Change-Id: Ifc005ced166aa7a065fef3e652977bae67625bf4
This commit removes some, but not all, uses of LA_PRINT_STRING. In
this commit I've removed those uses where there is an obvious language
object on which I can instead call the printstr method.
In the remaining 3 uses it is harder to know if the correct thing is
to call printstr on the current language, or on a specific language.
Currently obviously, we always call on the current language (as that's
what LA_PRINT_STRING does), and clearly this behaviour is good enough
right now, but is it "right"? I've left them for now and will give
them more thought in the future.
gdb/ChangeLog:
* expprint.c (print_subexp_standard): Replace uses of
LA_PRINT_STRING.
* f-valprint.c (f_language::value_print_inner): Likewise.
* guile/scm-pretty-print.c (ppscm_print_string_repr): Likewise.
* p-valprint.c (pascal_language::value_print_inner): Likewise.
* python/py-prettyprint.c (print_string_repr): Likewise.
Move the rust_language class declaration into the rust-lang.h header
file. This allows for the function implementations called directly in
rust-lang.c and rust-exp.y without the need for trampoline functions.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* rust-exp.y (rust_parse): Rename to...
(rust_language::parser): ...this.
* rust-lang.c (-rust_printstr): Rename to...
(rust_language::printstr): ...this.
(rust_value_print_inner): Delete declaration.
(val_print_struct): Rename to...
(rust_language::val_print_struct): ...this. Update calls to
member functions.
(rust_print_enum): Rename to...
(rust_language::print_enum): ...this. Update calls to member
functions.
(rust_value_print_inner): Rename to...
(rust_language::value_print_inner): ...this. Update calls to
member functions.
(exp_descriptor_rust): Rename to...
(rust_language::exp_descriptor_tab): ...this.
(class rust_language): Move to rust-lang.h.
(rust_language::language_arch_info): Implementation moved to here
from class declaration.
(rust_language::print_type): Likewise.
(rust_language::emitchar): Likewise.
(rust_language::is_string_type_p): Likewise.
* rust-lang.h: Add 'demangle.h', 'language.h', 'value.h', and
'c-lang.h' includes.
(rust_parse): Delete declaration.
(class rust_language): Class declaration moved here from
rust-lang.c.
In this commit:
commit b7c6e27dbbbbe678b2e2f0bf617605e055e1b378
Date: Tue Aug 4 17:07:59 2020 +0100
gdb: Convert language_data::la_op_print_tab to a method
A bug was introduced, the objc language now returns the wrong op_print
table. Fixed in this commit.
gdb/ChangeLog:
* objc-lang.c (objc_language::opcode_print_table): Return
objc_op_print_tab.
Move the pascal_language class declaration into the p-lang.h header
file. This allows for the function implementations to be spread over
the different p-*.c files without the need for global trampoline
functions.
As a consequence of this change many of the Pascal value and type
printing helper functions have become member functions within the
pascal_language class.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* p-exp.y (exp): Update call to pascal_is_string_type.
(pascal_parse): Rename to...
(pascal_language::parser): ...this.
* p-lang.c (is_pascal_string_type): Rename to...
(pascal_is_string_type): ...this.
(pascal_one_char): Rename to...
(pascal_language::print_one_char): ...this.
(pascal_printchar): Rename to...
(pascal_language::printchar): ...this. Update call to
print_one_char member function.
(pascal_op_print_tab): Rename to...
(pascal_language::op_print_tab): ...this.
(class pascal_language): Moved to p-lang.h.
(pascal_language::language_arch_info): Function implementation
moved out of class declaration.
(pascal_language::printstr): Likewise.
* p-lang.h (pascal_parse): Delete declaration.
(pascal_is_string_type): Declare.
(pascal_print_type): Delete declaration.
(pascal_print_typedef): Delete declaration.
(pascal_value_print_inner): Delete declaration.
(pascal_value_print): Delete declaration.
(pascal_type_print_method_args): Delete declaration.
(is_pascal_string_type): Delete declaration.
(pascal_printchar): Delete declaration.
(pascal_builtin_types): Delete declaration.
(pascal_type_print_base): Delete declaration.
(pascal_type_print_varspec_prefix): Delete declaration.
(class pascal_language): Moved here from p-lang.c.
* p-typeprint.c (pascal_type_print_varspec_suffix): Delete
declaration.
(pascal_type_print_derivation_info): Delete declaration.
(pascal_print_type): Rename to...
(pascal_language::print_type): ...this. Update calls to member
functions.
(pascal_print_typedef): Rename to...
(pascal_language::print_typedef): ...this. Update calls to member
functions.
(pascal_type_print_derivation_info): Rename to...
(pascal_language::type_print_derivation_info): ...this.
(pascal_type_print_method_args): Rename to...
(pascal_language::type_print_method_args): ...this.
(pascal_type_print_varspec_prefix): Rename to...
(pascal_language::type_print_varspec_prefix): ...this. Update
calls to member functions.
(pascal_print_func_args): Rename to...
(pascal_language::print_func_args): ...this. Update calls to
member functions.
(pascal_type_print_func_varspec_suffix): Rename to...
(pascal_language::type_print_func_varspec_suffix): ...this.
Update calls to member functions.
(pascal_type_print_varspec_suffix): Rename to...
(pascal_language::type_print_varspec_suffix): ...this. Update
calls to member functions.
(pascal_type_print_base): Rename to...
(pascal_language::type_print_base): ...this. Update calls to
member functions.
* p-valprint.c (pascal_value_print_inner): Rename to...
(pascal_language::value_print_inner): ...this. Update calls to
member functions.
(pascal_value_print): Rename to...
(pascal_language::value_print): ...this. Update calls to member
functions.
Move the go_language class into go-lang.h, this allows us to have
member functions implemented directly in the different go-*.c files
instead of having to trampoline out to global functions.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* go-exp.y (go_parse): Rename to...
(go_language::parser): ...this.
* go-lang.c (go_demangle): Rename to...
(go_language::demangle_symbol): ...this.
(go_language::expression_ops): Implementation moved here out of
class declaration.
(go_op_print_tab): Rename to...
(go_language::op_print_tab): ...this, update comment.
(class go_language): Declaration moved to go-lang.h.
(go_language::language_arch_info): Implementation moved here out
of class declaration.
* go-lang.h (go_parse): Delete declaration.
(go_demangle): Delete declaration.
(go_print_type): Delete declaration.
(go_value_print_inner): Delete declaration.
(class go_language): Declaration moved here from go-lang.c.
* go-typeprint.c (go_print_type): Rename to...
(go_language::print_type): ...this.
* go-valprint.c (go_value_print_inner): Rename to...
(go_language::value_print_inner): ...this.
* symtab.c (demangle_for_lookup): Call demangle_symbol method on
the go_language object.
Now that every use of the LA_EMIT_CHAR macro is within a language_defn
member function we can simply call the emitchar member function
directly instead of using the LA_EMIT_CHAR macro.
If we are ever inside a language object, for example, cplus_language,
while current_language points at something other than cplus_language
then this commit will result in a change in behaviour. However, I
believe if we did have such a difference then this would be a bug in
GDB. AS such I'm going to claim there _should_ be no user visible
changes from this commit.
gdb/ChangeLog:
* c-lang.c (language_defn::printchar): Call emitchar, not
LA_EMIT_CHAR.
* f-lang.h (f_language::printchar): Likewise.
* language.h (LA_EMIT_CHAR): Delete macro.
* rust-lang.c (rust_language::printchar): Call emitchar, not
LA_EMIT_CHAR.
This commit removes the global function c_printchar and moves the
implementation into language_defn::printchar.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* c-lang.c (c_printchar): Rename to...
(language_defn::printchar): ...this.
* c-lang.h (c_printchar): Delete declaration.
* language.c (language_defn::printchar): Delete this
implementation. Is now implemented in c-lang.c.
The function c_printchar is called from two places; it provides the
implementation of language_defn::printchar and it is called from
dwarf2_compute_name.
It would be nice to rename c_printchar as language_defn::printchar and
so avoid the trampoline.
To achieve this, instead of calling c_printchar directly from the
DWARF code, I lookup the C++ language object and call the printchar
member function.
In a later commit I can then rename c_printchar.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* dwarf2/read.c (dwarf2_compute_name): Call methods on C++
language object instead of calling global functions directly.
Spotted that print_char_chars appears to be unused, delete it. There
should be no user visible changes after this commit.
gdb/ChangeLog:
* valprint.c (print_char_chars): Delete definition.
* valprint.h (print_char_chars): Delete declaration.
gnu-nat.c was getting the inclusion of vm_param.h only by luck. We need
to explicitly include it to be sure to get the definitions of
VM_MIN/MAX_ADDRESS.
gdb/ChangeLog:
* gnu-nat.c: Include <mach/vm_param.h>.
The word "regnum" in comments should be uppercase, because it
reflects a variable name in the code.
gdb/ChangeLog
* arc-linux-tdep.c: Replace "regnum" with "REGNUM" in comments.
With this patch in place it is possible to build a GDB that
can run on ARC (GNU/Linux) hosts for debugging ARC targets.
The "arc-linux-nat.c" is a rather small one that mostly deals
with registers and a few thread related hooks.
v2 [1]:
- Remove "void" from the input of "_initialize_arc_linux_nat ()"
[1] Tom's remark after the first patch
https://sourceware.org/pipermail/gdb-patches/2020-November/173223.html
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add arc-linux-nat.c.
* configure.host (host to gdb names): Add arc*-*-linux*.
* configure.nat (gdb_host_cpu): Add arc.
* arc-linux-nat.c: New.
All the arc_linux_supply_*() target operations and the
arc_linux_collect_v2_regset() in arc-linux-tdep.c were
supplying/collecting all the registers in regcache as if the
REGNUM was set to -1.
The more efficient behavior is to examine the REGNUM and act
accordingly. That is what this patch does.
gdb/ChangeLog:
* arc-linux-tdep.c (supply_register): New.
(arc_linux_supply_gregset, arc_linux_supply_v2_regset,
arc_linux_collect_v2_regset): Consider REGNUM.
Implement functions needed to unwind signal frames on ARC Linux targets.
gdb/ChangeLog
* arc-linux-tdep.c (arc_linux_sc_reg_offsets): New static variable.
(arc_linux_is_sigtramp): New function.
(arc_linux_sigcontext_addr): Likewise.
(arc_linux_init_osabi): Use them.
This patch adds the necessary infrastructure to handle signal frames for
ARC architecture. It is fairly similar to what any other architecture
would have. Linux specific parts will be in a separate patch.
v2 [1]:
- Make the logic of "arc_sigtramp_frame_sniffer ()" simpler.
[1] Tom's remark for the first version
https://sourceware.org/pipermail/gdb-patches/2020-November/173221.html
gdb/ChangeLog:
* arc-tdep.c (arc_make_sigtramp_frame_cache): New function.
(arc_sigtramp_frame_this_id): Likewise.
(arc_sigtramp_frame_prev_register): Likewise.
(arc_sigtramp_frame_sniffer): Likewise.
(arc_siftramp_frame_unwind): New global variable.
(arc_gdbarch_init): Use sigtramp capabilities.
(arc_dump_tdep): Print sigtramp fields.
* arc-tdep.h (gdbarch_tdep): Add sigtramp fields.
For the expression rewrite series, I needed to move enum noside
earlier in expression.h. Because this is a pure move, and because it
seems harmless and uncontroversial to move an enum definition earlier
in a file, I'm pushing it in early, to reduce the size of that series.
Tested by rebuilding.
gdb/ChangeLog
2020-12-21 Tom Tromey <tom@tromey.com>
* expression.h (enum noside): Move earlier.
