This removes the ALL_OBJSECTIONS macro, replacing its uses with ranged
for loops.
The special code in this macro for noticing a "break" from the inner
loop was only needed in a single place; so rather than try to
replicate this, I've simply replaced that use with a "goto".
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symfile.c (overlay_invalidate_all, find_pc_overlay)
(find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update): Use all_objfiles.
* spu-tdep.c (spu_overlay_update): Use all_objfiles.
* printcmd.c (info_symbol_command): Use all_objfiles.
* objfiles.h (ALL_OBJSECTIONS): Remove.
* maint.c (maintenance_translate_address): Use all_objfiles.
* gcore.c (gcore_create_callback): Use all_objfiles.
(objfile_find_memory_regions): Likewise.
This removes the ALL_OBJFILES and ALL_FILETABS macros, replacing them
with ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (find_line_symtab, info_sources_command)
(make_source_files_completion_list): Use objfile_compunits.
* source.c (select_source_symtab): Use objfile_compunits.
* objfiles.h (struct objfile): Update comment.
(ALL_OBJFILES): Remove.
(ALL_FILETABS): Remove.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Use
objfile_compunits.
This removes ALL_OBJFILE_FILETABS, replacing its uses with ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Use compunit_filetabs.
* source.c (forget_cached_source_info_for_objfile): Use
compunit_filetabs.
* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
(ALL_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Use compunit_filetabs.
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for
loops.
Because this is still used in the ALL_OBJFILE_FILETABS macro, in some
places a declaration had to be removed or renamed to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
(compunit_filetabs): New.
* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
compunit_filetabs.
(info_sources_command, make_source_files_completion_list): Remove
declaration.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Remove declaration.
(maintenance_info_symtabs): Use compunit_filetabs.
(maintenance_info_line_tables): Likewise.
* source.c (select_source_symtab): Change local variable name.
(forget_cached_source_info_for_objfile): Remove declaration.
* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Remove declaration.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
declaration.
* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Remove declaration.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
compunit_filetabs.
This removes the ALL_COMPUNITS, replacing its uses with two nested
ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (lookup_objfile_from_block)
(find_pc_sect_compunit_symtab, search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_compunits.
* objfiles.h (ALL_COMPUNITS): Remove.
* maint.c (count_symtabs_and_blocks): Use objfile_compunits.
* cp-support.c (add_symbol_overload_list_qualified): Use
objfile_compunits.
* ada-lang.c (ada_collect_symbol_completion_matches)
(ada_add_global_exceptions): Use objfile_compunits.
This removes the ALL_MSYMBOLS and ALL_OBJFILE_MSYMBOLS macros,
replacing their uses with ranged for loops.
In a couple of spots, a new declaration was needed in order to work
around shadowing; these are just temporary and are removed in a
subsequent patch.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_msymbols.
* ada-lang.c (ada_lookup_simple_minsym)
(ada_collect_symbol_completion_matches): Use objfile_msymbols.
* minsyms.c (find_solib_trampoline_target): Use objfile_msymbols.
* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use
objfile_msymbols.
* coffread.c (coff_symfile_read): Use objfile_msymbols.
* symmisc.c (dump_msymbols): Use objfile_msymbols.
* objc-lang.c (find_methods): Use objfile_msymbols.
(info_selectors_command, info_classes_command): Likewise.
* stabsread.c (scan_file_globals): Use objfile_msymbols.
* objfiles.h (class objfile_msymbols): New.
(ALL_OBJFILE_MSYMBOLS): Remove.
(ALL_MSYMBOLS): Remove.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This removes the ALL_PSPACE_OBJFILES macro in favor of ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* probe.c (parse_probes_in_pspace): Use all_objfiles.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
all_objfiles.
* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables): Use
all_objfiles.
* source.c (forget_cached_source_info): Use all_objfiles.
* symfile-debug.c (set_debug_symfile): Use all_objfiles.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
* objfiles.c (update_section_map): Use all_objfiles.
(shared_objfile_contains_address_p): Likewise.
* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.
This introduces an iterable object which can be used to iterate over
objfiles. It also introduces a generic "next_iterator", which can be
used to iterate over types that have a "next" field.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* common/next-iterator.h: New file.
* objfiles.h (class all_objfiles): New.
(struct objfile_iterator): New.
2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Move the description of the changed "frame", "select-frame",
and "info frame" commands to the Changed commands section.
Check for null before dereferencing an operand pointer. Normally
this situation should never arise, but could happen if a "partial"
instruction is encountered at the end of a file or section.
opcodes/
* s12z-dis.c (print_insn_s12z): Do not dereference an
operand if it is null.
gas/
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
opcodes/
* s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
An upcoming sync with gcc's libiberty [1] will remove support for old
mangling schemes (GNU v2, Lucid, ARM, HP and EDG). It will remove the
cplus_demangle_opname function, so we need to get rid of its usages in
GDB (it's a GNU v2 specific function).
I think the changes are mostly relatively obvious, some hacks that were
necessary to support overloaded operators with GNU v2 mangling are not
needed anymore.
The change in stabsread.c is perhaps less obvious. I think we could get
rid of more code in that region that is specific to old mangling
schemes, but I chose to do only the minimal changes required to remove
the cplus_demangle_opname uses. There is also a detailed comment just
above that explaining how GNU v2 and v3 mangled symbols are handled, I
decided to leave it as-is, since I wasn't sure which part to remove,
change or leave there.
[1] The commit "Remove support for demangling GCC 2.x era mangling
schemes.", specifically.
gdb/ChangeLog:
* gdbtypes.c (check_stub_method_group): Remove handling of old
mangling schemes.
* linespec.c (find_methods): Likewise.
* stabsread.c (read_member_functions): Likewise.
* valops.c (search_struct_method): Likewise.
(value_struct_elt_for_reference): Likewise.
* NEWS: Mention this change.
gdb/testsuite/ChangeLog:
* gdb.cp/demangle.exp (test_gnu_style_demangling): Rename to...
(test_gnuv3_style_demangling): ... this.
(test_lucid_style_demangling): Remove.
(test_arm_style_demangling): Remove.
(test_hp_style_demangling): Remove.
(do_tests): Remove calls to the above.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Remove mention of specific
demangle-style values, just refer to the in-process help.
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
I noticed that when running this test:
make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"
I would occasionally see some UNRESOLVED test results like this:
(gdb)
PASS: gdb.mi/mi-break.exp: mi-mode=separate: breakpoint at main
Expecting: ^(kill[
]+)?(.*[
]+[(]gdb[)]
[ ]*)
kill
&"kill\n"
~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n"
=thread-group-exited,id="i1"
ERROR: Got interactive prompt.
UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
The problem appears to be that the expect buffer fills up to include
the '(y or n)' prompt without including the following lines.
The pattern supplied by the outer test script is looking for the
following lines. As the following lines are not present then expect
matches on the interactive prompt case rather than the case for the
user supplied pattern.
The problem with this is that we are not really at an interactive
prompt, GDB is providing an answer for us and then moving on. When I
examine a successful run of the test the output from GDB is identical,
the only difference is where expect happens to buffer the output from
GDB.
This patch remove all special handling of the interactive prompt
case. This means that if we ever break GDB and start seeing an
unexpected interactive prompt then tests will rely on a timeout to
fail, instead of having dedicated interactive prompt detection, but
this solves the problem that an auto-answered prompt looks very
similar to an interactive prompt.
With this patch in place I can now leave the following loop running
indefinitely, where before it would fail usually after ~10
iterations.
while make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"; \
do /bin/true; \
done
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_gdb_test): Remove interactive prompt
case.
Valgrind reports a leak in many tests, such as:
==9382== 16 bytes in 1 blocks are definitely lost in loss record 236 of 3,282
==9382== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==9382== by 0x4197AF: xrealloc (common-utils.c:64)
==9382== by 0x51D16A: xresizevec<linespec_canonical_name> (poison.h:170)
==9382== by 0x51D16A: add_sal_to_sals(linespec_state*, std::vector<symtab_and_line, std::allocator<symtab_and_line> >*, symtab_and_line*, char const*, int) (linespec.c:1041)
==9382== by 0x51E2BF: create_sals_line_offset (linespec.c:2215)
==9382== by 0x51E2BF: convert_linespec_to_sals(linespec_state*, linespec*) (linespec.c:2358)
==9382== by 0x521B5D: convert_explicit_location_to_sals (linespec.c:2473)
Fix leak by xfree-ing self->canonical_names in linespec_state_destructor.
The leak probably appeared with the patch 'Remove cleanup from linespec.c',
as there was a cleanup to xfree canonical_names before the patch.
Tested on Debian/amd64, native and under valgrind.
2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* linespec.c (linespec_state_destructor): Free self->canonical_names.
PR gdb/24060 points out a compilation failure of the C, Fortran and Pascal
parsers when they are built using the macOS system bison. The bug is a name
clash between the VARIABLE token name and the VARIABLE enumerator in ui-out.h.
This patch renames VARIABLE in c-exp.y, f-exp.y and p-exp.y to DOLLAR_VARIABLE
to avoid the clash. It also renames similar variables in other .y files so
that all languages use the same name.
gdb/ChangeLog
2019-01-07 Tom Tromey <tom@tromey.com>
2019-01-07 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/24060:
* ada-exp.y (DOLLAR_VARIABLE): Rename from SPECIAL_VARIABLE.
* ada-lex.l (DOLLAR_VARIABLE): Likewise.
* c-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.
* f-exp.y (DOLLAR_VARIABLE): Likewise.
* m2-exp.y (DOLLAR_VARIABLE): Rename from INTERNAL_VAR.
* p-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.
PR 24044
* cxxfilt.c (hp_symbol_characters): Delete.
(main): Remove depcreated demangling styles.
* stabs.c (parse_stab_argtypes): Remove support for old gnu v2
demangling opnames.
* testsuite/binutils-all/cxxfilt.exp: Use the
--no-strip-underscore option for targets that do prefix their
symbols with underscores.
Update tests to elimiate those that use gnu v2 encoding.
This adds support for the Arm Ares CPU for AArch64.
It implements the Armv8.2-A architecture with the optional features
of statistical profiling, dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-aarch64.c (aarch64_cpus): Add ares.
* doc/c-aarch64.texi (-mcpu): Document ares value.
This adds a new testcase for objcopy -O ihex to test
that it correctly works.
binutils/ChangeLog:
PR 24065
* testsuite/binutils-all/copy-6.d: New test.
* testsuite/binutils-all/objcopy.exp: Use it.
Declarations for functions in source.c are split between source.h and
symtab.h. This commit moves the small number that are in symtab.h
into source.h. There's just one file that needs to add an include of
source.h in order to build.
I've moved the function header comments from source.c to source.h
inline with the recommended GDB style.
gdb/ChangeLog:
* source.c (select_source_symtab): Move header comment to
declaration in source.h.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(identify_source_line): Likewise.
* source.h (identify_source_line): Move declaration from symtab.h
and add comment from source.c
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition from symtab.h.
* symtab.h (identify_source_line): Move declaration to source.h.
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition to source.h.
* tui/tui-hooks.c: Add 'source.h' include.
...by which I mean from high line number to low, not, actually
backward character by character!
Commit:
commit 62f29fda90cf1d5a1899f57ef78452471c707fd6
Date: Tue Oct 9 22:21:05 2018 -0600
Highlight source code using GNU Source Highlight
introduced a regression in the test gdb.linespec/explicit.exp, in
which a request is made to GDB to print a reverse sequence of lines,
from +10 to -10 from the current line number. The expected behaviour
is that GDB prints nothing. The above commit changed this so that GDB
now prints:
Line number 32 out of range; /path/to/gdb/testsuite/gdb.linespec/explicit.c has 71 lines.
which is a little confusing.
This commit fixes the regression, and restores the behaviour that GDB
prints nothing.
While I was passing I noticed a call to `back` on a std::string that I
was concerned could be empty if the request for source lines returns
an empty string. I don't know if it would be possible for a request
for lines to return an empty string, I guess it should be impossible,
in which case, maybe this should be an assertion, but adding a `empty`
check, seems like an easy and cheap safety net.
gdb/ChangeLog:
* source.c (print_source_lines_base): Handle requests to print
reverse line number sequences, and guard against empty lines
string.
In this commit:
commit 62f29fda90cf1d5a1899f57ef78452471c707fd6
Date: Tue Oct 9 22:21:05 2018 -0600
Highlight source code using GNU Source Highlight
A bug was introduced such that when displaying source code from a file
with lines `\r\n` GDB would print `^M` at the end of each line.
This caused a regression on the test gdb.fortran/nested-funcs.exp,
which happens to have `\r\n` line endings.
gdb/ChangeLog:
* source.c (print_source_lines_base): Fix skip of '\r' if next
character is '\n'.
The previous commit breaks the GDB build, which is still using functions
cplus_demangle_opname & co. Since removing these usages is not an
obvious fix, let's revert this patch until we get rid of them.
PR 24044
* stabs.c (parse_stab_argtypes): Remove call to
cplus_mangle_opcode.
* testsuite/binutils-all/cxxfilt.exp: Replace tests of v2 encoding
with v3 encoding. Add escape for known failures.
This adds support for the Arm Ares CPU in the arm port.
It implements the Armv8.2-A architecture with the relevant optional
features
of dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-arm.c (arm_cpus): Add ares.
* doc/c-arm.texi (-mcpu): Document ares value.
This removes the remaining cleanups from c-exp.y by moving some
globals into c_parse_state, and changing expansion_obstack to be an
auto_obstack.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
* c-exp.y (struct c_parse_state) <macro_original_text,
expansion_obstack>: New member.
(macro_original_text, expansion_obstack): Remove globals.
(scan_macro_expansion, scanning_macro_expansion)
(finished_macro_expansion): Update.
(scan_macro_cleanup): Remove.
(yylex, c_parse): Update.
This removes a string-related cleanup from c-exp.y, by adding a new
member to c_parse_state to store the strings.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
* c-exp.y (struct c_parse_state) <strings>: New member.
(operator_stoken): Update.
This removes the use of VEC from parse.c and, at the same time,
removes some related cleanups from c-exp.y.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
* parser-defs.h (type_ptr): Remove typedef. Don't declare VEC.
(union type_stack_elt) <typelist_val>: Now a pointer to
std::vector.
(type_stack_cleanup): Don't declare.
(push_typelist): Update.
* parse.c (pop_typelist): Return a std::vector.
(push_typelist): Take a std::vector.
(follow_types): Update. Do not free args.
(type_stack_cleanup): Remove.
* c-exp.y (struct c_parse_state): New.
(cpstate): New global.
(type_aggregate_p, exp, ptr_operator, parameter_typelist)
(nonempty_typelist): Update.
(func_mod): Create a new vector.
(c_parse): Create a c_parse_state.
(check_parameter_typelist): Do not delete params.
(function_method): Update. Do not delete type_list.
PR gdb/28155 notes a crash in "finish" that occurs with a particular
source file compiled by clang.
The bug is the typical gdb problem of a missing call to check_typedef.
clang emits a function whose return type is a typedef to void.
get_return_value asserts that the return type is not void, but the
callers were not using check_typedef first.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
PR gdb/28155:
* python/py-finishbreakpoint.c (bpfinishpy_init): Use
check_typedef.
* infcmd.c (finish_command_fsm_should_stop): Use check_typedef.
(print_return_value): Likewise.
gdb/testsuite/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
PR gdb/28155:
* gdb.dwarf2/typedef-void-finish.exp: New file.
Now that gdb is transitioning away from cleanups, there is no reason
to keep the cleanup and exception checker scripts around. This patch
removes them.
gdb/ChangeLog
2019-01-05 Tom Tromey <tom@tromey.com>
* contrib/cleanup_check.py: Remove.
* contrib/gcc-with-excheck: Remove.
* contrib/exsummary.py: Remove.
* contrib/excheck.py: Remove.
