Ignore .align at the start of a section may result in misalignment when
partial linking. Manually add -mignore-start-align option without partial
linking.
Gcc -falign-functions add .align 5 to the start of a section, it causes some
error message mismatch. Set these testcases to xfail on LoongArch target.
Given that the disassembler should never abort when decoding
(potentially random) data, assertion statements in the
`get_*reg_qualifier_from_value' function family prove problematic.
Consider the random 32-bit word W, encoded in a data segment and
encountered on execution of `objdump -D <obj_name>'.
If:
(W & ~opcode_mask) == valid instruction
Then before `print_insn_aarch64_word' has a chance to report the
instruction as potentially undefined, an attempt will be made to have
the qualifiers for the instruction's register operands (if any)
decoded. If the relevant bits do not map onto a valid qualifier for
the matched instruction-like word, an abort will be triggered and the
execution of objdump aborted.
As this scenario is perfectly feasible and, in light of the fact that
objdump must successfully decode all sections of a given object file,
it is not appropriate to assert in this family of functions.
Therefore, we add a new pseudo-qualifier `AARCH64_OPND_QLF_ERR' for
handling invalid qualifier-associated values and re-purpose the
assertion conditions in qualifier-retrieving functions to be the
predicate guarding the returning of the calculated qualifier type.
If the predicate fails, we return this new qualifier and allow the
caller to handle the error as appropriate.
As these functions are called either from within
`aarch64_extract_operand' or `do_special_decoding', both of which are
expected to return non-zero values, it suffices that callers return
zero upon encountering `AARCH64_OPND_QLF_ERR'.
Ar present the error presented in the hypothetical scenario has been
encountered in `get_sreg_qualifier_from_value', but the change is made
to the whole family to keep the interface consistent.
Bug: https://sourceware.org/PR31595
Support zcmp extension push/pop/popret and popret zero instructions.
The `reg_list' is a list containing 1 to 13 registers, we can use:
"{ra}, {ra, s0}, {ra, s0-s1}, {ra, s0-s2} ... {ra, s0-sN}"
to present this feature.
Passed gcc/binutils regressions of riscv-gnu-toolchain.
Most of work was finished by Sinan Lin.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subset): Imply zca for zcmp.
(riscv_supported_std_z_ext): Added zcmp with version 1.0.
(riscv_parse_check_conflicts): Zcmp conflicts with d/zcd.
(riscv_multi_subset_supports): Handle zcmp.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* config/tc-riscv.c (regno_to_reg_list): New function, used to map
register to reg_list number.
(reglist_lookup): Called reglist_lookup_internal. Return false if
reg_list number is zero, which is an invalid value.
(reglist_lookup_internal): Parse register list, and return the last
register by regno_to_reg_list.
(validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/march-help.l: Updated.
* testsuite/gas/riscv/zcmp-push-pop-fail.d: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.l: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.s: New test.
* testsuite/gas/riscv/zcmp-push-pop.d: New test.
* testsuite/gas/riscv/zcmp-push-pop.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH/MASK_CM_PUSH): New macros for zcmp.
(MATCH/MASK_CM_POP): Ditto.
(MATCH/MASK_CM_POPRET): Ditto.
(MATCH/MASK_CM_POPRETZ): Ditto.
(DECLARE_INSN): New declarations for zcmp.
* opcode/riscv.h (EXTRACT/ENCODE/VALID_ZCMP_SPIMM): Handle spimm
operand for zcmp.
(OP_MASK_REG_LIST): Handle operand for zcmp register list.
(OP_SH_REG_LIST): Ditto.
(ZCMP_SP_ALIGNMENT): New argument, used in riscv_get_sp_base.
(X_S0, X_S1, X_S2, X_S10, X_S11): New register numbers.
(enum riscv_insn_class): Added INSN_CLASS_ZCMP.
(extern riscv_get_sp_base): Added.
opcodes/ChangeLog:
* riscv-dis.c (print_reg_list): New function, used to get zcmp
reg_list field.
(riscv_get_spimm): New function, used to get zcmp sp adjustment
immediate.
(print_insn_args): Handle new operands for zcmp.
* riscv-opc.c (riscv_get_sp_base): New function, used by gas and
objdump. Get sp base adjustment.
(riscv_opcodes): Added zcmp instructions.
The following instructions are added in this patch:
- ADDPT and SUBPT - Add/Subtract checked pointer
- MADDPT and MSUBPT - Multiply Add/Subtract checked pointer
These instructions are part of Checked Pointer Arithmetic extension.
This patch adds assembler and disassembler support for these instructions
with relevant checks. Tests are included as well.
A new flag "+cpa" added to documentation. This flag enables CPA extension.
Regression tested on the aarch64-none-linux-gnu target and no regressions
have been found.
Print a warning message when the register type of a specified register
name does not match with the operand's register type:
operand {#}: expected {access|control|floating-point|general|vector}
register name [as {base|index} register]
Introduce a s390-specific assembler option "warn-regtype-mismatch"
with the values "strict", "relaxed", and "no" as well as an option
"no-warn-regtype-mismatch" which control whether the assembler
performs register name type checks and generates above warning messages.
warn-regtype-mismatch=strict:
Perform strict register name type checks.
warn-regtype-mismatch=relaxed:
Perform relaxed register name type checks, which allow floating-point
register (FPR) names %f0 to %f15 to be specified as argument to vector
register (VR) operands and vector register (VR) names %v0 to %v15 to
be specified as argument to floating-point register (FPR) operands.
This is acceptable as the FPRs are embedded into the lower halves of
the VRs. Make "relaxed" the default, as GCC generates assembler code
using FPR and VR interchangeably, which would cause assembler warnings
to be generated with "strict".
warn-regtype-mismatch=no:
no-warn-regtype-mismatch:
Disable any register name type checks.
Tag .insn pseudo mnemonics as such, to skip register name type checks
on those. They need to be skipped, as there do not exist .insn pseudo
mnemonics for every possible operand register type combination. Keep
track of the currently parsed operand number to provide it as reference
in warning messages.
To verify that the introduction of this change does not unnecessarily
affect the compilation of existing code the GNU Binutils, GNU C Library,
and Linux Kernel have been build with the new assembler, verifying that
the assembler did not generate any of the new warning messages.
gas/
* config/tc-s390.c: Handle new assembler options
"[no]warn-regtype-mismatch[=strict|relaxed|no". Annotate
parsed register expressions with register type. Keep track of
operand number being parsed. Print warning message in case of
register type mismatch between instruction operand and parsed
register expression.
* doc/as.texi: Document new s390-specific assembler options
"[no-]warn-regtype-mismatch[=strict|relaxed|no]".
* NEWS: Mention new s390-specific register name type checks and
related assembler option "warn-regtype-mismatch=strict|
relaxed|no".
* testsuite/gas/s390/s390.exp: Add test cases for new assembler
option "warn-regtype-mismatch={strict|relaxed}".
* testsuite/gas/s390/esa-g5.s: Fix register types in tests for
didbr, diebr, tbdr, and tbedr.
* testsuite/gas/s390/zarch-z13.s: Fix register types in tests
for vgef, vgeg, vscef, and vsceg.
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.s:
Tests for assembler option "warn-regtype-mismatch=strict".
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.l:
Likewise.
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.s:
Tests for assembler option "warn-regtype-mismatch=relaxed".
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.l:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s: Update
test cases for assembler option "warn-regtype-mismatch"
defaulting to "relaxed".
* testsuite/gas/s390/zarch-omitted-base-index-err.l: Likewise.
include/
* opcode/s390.h (S390_INSTR_FLAG_PSEUDO_MNEMONIC): Add
instruction flag to tag .insn pseudo-mnemonics.
opcodes/
* s390-opc.c (s390_opformats): Tag .insn pseudo-mnemonics as
such.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Hi,
Commits af1bd77 and 3f4ff08 introduced the Pointer Authentication feature with internal names that don't match the actual feature name pauth. The new feature PAuth_LR introduced in Armv9.5-A is an extension of the PAuth feature of Armv8.3-A. Using a different naming for it not based on the formerly "PAC" would create confusion.
Regression tested on aarch64-none-elf, and no regression found.
Ok for binutils-master? I don't have commit access so I need someone to commit on my behalf.
Regards,
Matthieu.
From 58b38358b2788939d81f2df7f5fb4c64a31ae06e Mon Sep 17 00:00:00 2001
From: Matthieu Longo <matthieu.longo@arm.com>
Date: Fri, 23 Feb 2024 11:30:40 +0000
Subject: [PATCH] aarch64: rename internals related to PAuth feature to use
pauth in their naming for coherency
Commits af1bd77 and 3f4ff08 introduced the Pointer Authentication feature
with internal names that don't match the actual feature name pauth. The new
feature PAuth_LR introduced in Armv9.5-A is an extension of the PAuth feature
of Armv8.3-A. Using a different naming for it not based on the formerly "PAC"
would create confusion.
TCA instructions start with an X, this introduces ambiguities when it
comes to XOR (Is it the OR on the TCA or the XOR of the core?). For this
reason, we rename OR to IOR and XOR to EOR.
OR and XOR variants are still valid on KV3-1 and KV3-2. However, they
have been completely removed from KV4-1.
opcodes/ChangeLog:
* kvx-opc.c: Regenerate.
include/ChangeLog:
* opcode/kvx.h: Regenerate.
gas/ChangeLog:
* config/kvx-parse.h: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-64.s: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-64.s: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-64.s: Regenerate.
DBNZ instruction decrements its source register operand, and if
the result is non-zero it branches to the location defined by a signed
half-word displacement operand.
DBNZ instruction is in BRANCH class as other branch instrucitons
like B, Bcc, etc. However, DBNZ is the only branch instruction
that stores a branch offset in the second operand. Thus it must
be placed in a distinct class and treated differently.
For example, current logic of arc_insn_get_branch_target in GDB
assumes that a branch offset is always stored in the first operand
for BRANCH class and it's wrong for DBNZ.
include/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* opcode/arc.h (enum insn_class_t): Add DBNZ class.
opcodes/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* arc-tbl.h (dbnz): Use "DBNZ" class.
* arc-dis.c (arc_opcode_to_insn_type): Handle "DBNZ" class.
gas/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* config/tc-arc.c (is_br_jmp_insn_p): Add check against "DBNZ".
There are no legacy ldind nor ldabs BPF instructions with BPF_SIZE_DW.
For some reason we were (incorrectly) supporting these. This patch
updates the opcodes so the instructions get removed and modifies the
GAS manual and testsuite accordingly.
See discussion at
https://lore.kernel.org/bpf/110aad7a-f8a3-46ed-9fda-2f8ee54dcb89@linux.dev
Tested in bpf-uknonwn-none target, x86-64-linux-gnu host.
include/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
opcodes/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
gas/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): There is no indirect 64-bit
load instruction.
(BPF Instructions): There is no absolute 64-bit load instruction.
* testsuite/gas/bpf/mem.s: Update test accordingly.
* testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-be.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.s: Likewise.
* testsuite/gas/bpf/mem.d: Likewise.
* testsuite/gas/bpf/mem.s: Likewise.
This matches the dependencies in the architecture, in LLVM, and even in the
original Binutils commit message that mistakenly included it only in armv9.4-a.
The particular choices of address indexing, along with their encoding
for RCPC3 instructions lead to the requirement of a new set of operand
descriptions, along with the relevant inserter/extractor set.
That is, for the integer load/stores, there is only a single valid
indexing offset quantity and offset mode is allowed - The value is
always equivalent to the amount of data read/stored by the
operation and the offset is post-indexed for Load-Acquire RCpc, and
pre-indexed with writeback for Store-Release insns.
This indexing quantity/mode pair is selected by the setting of a
single bit in the instruction. To represent these insns, we add the
following operand types:
- AARCH64_OPND_RCPC3_ADDR_OPT_POSTIND
- AARCH64_OPND_RCPC3_ADDR_OPT_PREIND_WB
In the case of loads and stores involving SIMD/FP registers, the
optional offset is encoded as an 8-bit signed immediate, but neither
post-indexing or pre-indexing with writeback is available. This
created the need for an operand type similar to
AARCH64_OPND_ADDR_OFFSET, with the difference that FLD_index should
not be checked.
We thus introduce the AARCH64_OPND_RCPC3_ADDR_OFFSET operand, a
variant of AARCH64_OPND_ADDR_OFFSET, w/o the FLD_index bitfield.
Beyond the need to encode any registers involved in data transfer and
the address base register for load/stores, it is necessary to specify
the data register addressing mode and whether the address register is
to be pre/post-indexed, whereby loads may be post-indexed and stores
pre-indexed with write-back.
The use of a single bit to specify both the indexing mode and indexing
value requires a novel function be written to accommodate this for
address operand insertion in assembly and another for extraction in
disassembly, along with the definition of two insn fields for use with
these instructions.
This therefore defines the following functions:
- aarch64_ins_rcpc3_addr_opt_offset
- aarch64_ins_rcpc3_addr_offset
- aarch64_ext_rcpc3_addr_opt_offset
- aarch64_ext_rcpc3_addr_offset
It extends the `do_special_{encoding|decoding}' functions and defines
two rcpc3 instruction fields:
- FLD_opc2
- FLD_rcpc3_size
The allowed immediate offsets in integer rcpc3 load store instructions
are not encoded explicitly in the instruction itself, being rather
implicitly equivalent to the amount of data loaded/stored by the
instruction.
This leads to the requirement that this quantity be calculated based on
the number of registers involved in the transfer, either as data
source or destination registers and their respective qualifiers.
This is done via `calc_ldst_datasize (const aarch64_opnd_info *opnds)'
implemented here, using a cumulative sum of qualifier sizes preceding
the address operand in the OPNDS operand list argument.
Indicating the presence of the Armv8.2-a feature adding further
support for the Release Consistency Model, the `+rcpc3' architectural
extension flag is added to the list of possible `-march' options in
Binutils, together with the necessary macro for encoding rcpc3
instructions.
Hi,
This patch add support for SVE2.1 instructions ld1q,
ld2q, ld3q and ld4q, st1q, st2q, st3q and st4q.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for SVE2.1 instruction dupq, eorqv and extq.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SVE2p1 (SVE2.1 Extension) feature
along with +sve2p1 optional flag to enabe this feature.
Also support for following SVE2p1 instructions is added
addqv, andqv, smaxqv, sminqv, umaxqv, uminqv and uminqv.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SME2p1 and "movaz" instructions
along with the optional flag +sme2p1.
Following "movaz" instructions are add:
Move and zero two ZA tile slices to vector registers.
Move and zero four ZA tile slices to vector registers.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for SVE2.1 and SME2.1 non-widening BFloat16
(FEAT_B16B16) instructions.
Following instructions predicated, unpredicated and indexed
variants are added in this patch.
bfadd, bfclamp, bfmax bfmaxnm, bfmin,bfminnm,
bfmla,bfmls,bfmul and bfsub.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Additionally, change FEAT_XS tlbi variants to be gated on "+xs" instead of
"+d128". This is an incremental improvement; there are still some FEAT_XS tlbi
variants that are gated incorrectly or missing entirely.
This patch adds support for the new AArch64 system registers that are part of the following extensions:
* FEAT_DEBUGv8p9
* FEAT_PMUv3p9
* FEAT_PMUv3_SS
* FEAT_PMUv3_ICNTR
* FEAT_SEBEP
This patch adds support for FEAT_THE doubleword and quadword instructions.
doubleword insturctions are enabled by "+the" flag whereas quadword
instructions are enabled on passing both "+the and +d128" flags.
Support for following sets of instructions is added in this patch.
Read check write compare and swap doubleword:
(rcwcas, rcwcasa, rcwcasal, rcwcasl)
Read check write compare and swap quadword:
(rcwcasp,rcwcaspa, rcwcaspal, rcwcaspl)
Read check write software compare and swap doubleword:
(rcwscas, rcwscasa, rcwscasal, rcwscasl)
Read check write software compare and swap quadword:
(rcwscasp, rcwscaspa, rcwscaspal, rcwscaspl)
Read check write atomic bit clear on doubleword:
(rcwclr, rcwclra, rcwclral, rcwclrl)
Read check write atomic bit clear on quadword:
(rcwclrp, rcwclrpa, rcwclrpal, rcwclrpl)
Read check write software atomic bit clear on doubleword:
(rcwsclr, rcwsclra, rcwsclral, rcwsclrl)
Read check write software atomic bit clear on quadword:
(rcwsclrp,rcwsclrpa, rcwsclrpal,rcwsclrpl)
Read check write atomic bit set on doubleword:
(rcwset,rcwseta, rcwsetal,rcwsetl)
Read check write atomic bit set on quadword:
(rcwsetp,rcwsetpa,rcwsetpal,rcwsetpl)
Read check write software atomic bit set on doubleword:
(rcwsset,rcwsseta,rcwssetal,rcwssetl)
Read check write software atomic bit set on quadword:
(rcwssetp,rcwssetpa,rcwssetpal,rcwssetpl)
Read check write swap doubleword:
(rcwswp,rcwswpa,rcwswpal,rcwswpl)
Read check write swap quadword:
(rcwswpp,rcwswppa, rcwswppal,rcwswppl)
Read check write software swap doubleword:
(rcwsswp,rcwsswpa,rcwsswpal,rcwsswpl)
Read check write software swap quadword:
(rcwsswpp,rcwsswppa,rcwsswppal,rcwsswppl)
With the addition of 128-bit system registers to the Arm architecture
starting with Armv9.4-a, a mechanism for manipulating their contents
is introduced with the `msrr' and `mrrs' instruction pair.
These move values from one such 128-bit system register into a pair of
contiguous general-purpose registers and vice-versa, as for example:
msrr ttlb0_el1, x0, x1
mrrs x0, x1, ttlb0_el1
This patch adds the necessary support for these instructions, adding
checks for system-register width by defining a new operand type in the
form of `AARCH64_OPND_SYSREG128' and the `aarch64_sys_reg_128bit_p'
predicate, responsible for checking whether the requested system
register table entry is marked as implemented in the 128-bit mode via
the F_REG_128 flag.
The addition of 128-bit page table descriptors and, with it, the
addition of 128-bit system registers for these means that special
"invalidate translation table entry" instructions are needed to cope
with the new 128-bit model. This is introduced with the `tlbpi'
instruction, implemented here.
While CRn and CRm fields in the SYSP instruction are 4-bit wide and
are thus able to accommodate values in the range 0-15, the
specifications for the SYSP instructions limit their ranges to 8-9 for
CRm and 0-7 in the case of CRn.
This led to the need to signal in some way to the operand parser that
a given operand is under special restrictions regarding its use. This
is done via the new `F_OPD_NARROW' flag, indicating a narrowing in the
range of operand values for fields in the instruction tagged with the
flag.
The flag is then used in `parse_operands' when the instruction is
assembled, but needs not be taken into consideration during
disassembly.
Two of the instructions added by the `+d128' architectural extension
add the flexibility to have two optional operands. Prior to the
addition of the `tlbip' and `sysp' instructions, no mnemonic allowed
more than one such optional operand.
With `tlbip' as an example, some TLBIP instruction names do not allow
for any optional operands, while others allow for both to be optional.
In the latter case, it is possible that either the second operand
alone is omitted or both operands are omitted.
Therefore, a considerable degree of flexibility needed to be added to
the way operands were parsed. It was, however, possible to achieve
this with relatively few changes to existing code.
it is noteworthy that opcode flags specifying the optional operand
number are non-orthogonal. For example, we have:
#define F_OPD1_OPT (2 << 12) : 0b10 << 12
#define F_OPD2_OPT (3 << 12) : 0b11 << 12
such that by virtue of the observation that
(F_OPD1_OPT | F_OPD2_OPT) == F_OPD2_OPT
it is impossible to mark both operands 1 and 2 as optional for an
instruction and it is assumed that a maximum of 1 operand can ever be
optional. This is not overly-problematic given that, for optional
pairs, the second optional operand is always found immediately after
the first. Thus, it suffices for us to flag that there is a second
optional operand. With this fact, we can infer its position in the
mnemonic from the position of the first (e.g. if the second operand in
the mnemonic is optional, we know the third is too). We therefore
define the `F_OPD_PAIR_OPT' flag and calculate its position in the
mnemonic from the value encoded by the `F_OPD<n>_OPT' flag.
Another observation is that there is a tight coupling between default
values assigned to the two registers when one (or both) are omitted
from the mnemonic. Namely, if Xt1 has a value of 0x1f (the zero
register is specified), Xt2 defaults to the same value, otherwise Xt2
will be assigned Xt + 1. This meant that where you have default value
validation, in checking the second optional operand's value, it is
also necessary to look at the value assigned to the
previously-processed operand value before deciding its validity. Thus
`process_omitted_operand' needs not only access to its `operand'
argument, but also to the global `inst' struct.
Analysis of the allowed operand values for `sysp' and `tlbip' reveals
a significant departure from the allowed behavior for operand register
pairs (hitherto labeled AARCH64_OPND_PAIRREG) observed for other
insns in this category.
For instructions `casp', `mrrs' and `msrr' the register pair must
always start at an even index and the second register in the pair is
the index + 1. This precludes the use of xzr as the first register,
given it corresponds to register number 31.
This is different in the case of `sysp' and `tlbip', however. These
allow the use of xzr and, where the first operand in the pair is
omitted, this is the default value assigned to it. When this
operand is assigned xzr, it is expected that the second operand will
likewise take on a value of xzr.
These two instructions therefore "break" two rules of register pairs:
* The first of the two registers is odd-numbered.
* The index of the second register is equal to that of the first,
and not n+1.
To allow for this departure from hitherto standard behavior, we
extend the functionality of the assembler by defining an extension of
the AARCH64_OPND_PAIRREG, called AARCH64_OPND_PAIRREG_OR_XZR.
It is used in defining `sysp' and `tlbip' and allows
`operand_general_constraint_met_p' to allow the pair to both take on
the value of xzr.
Given the introduction of the new Armv9.4-a `sysp' insn using the
following syntax:
sysp #<op1>, <Cn>, <Cm>, #<op2>{, <Xt1>, <Xt2>}
and by extension the need to encode 6 assembly operands, extend
Binutils to handle instructions taking 6 operands, up from a previous
maximum of 5.
Indicating the presence of the Armv9.4-a features concerning 128-bit
Page Table Descriptors, 128-bit System Registers and Instructions,
the "+d128" architectural extension flag is added to the list of
possible -march options in Binutils, together with the necessary macro
for encoding d128 instructions.
This patch adds AArch32 support for -march=armv8.9-a and
-march=armv9.4-a. The behaviour of the new options can be
expressed using a combination of existing feature flags
and tables.
The cpu_arch_ver entries for ARM_ARCH_V9_4A and ARM_ARCH_V8_9A
are technically redundant but it including them for macro code
consistency across architectures.
Since the particularity of "th.vsetvli" was not taken into account in the
initial support patches for XTheadVector, the program operation failed
due to instruction coding errors. According to T-Head SPEC ([1]), the
"vsetvl" in the XTheadVector extension consists of SEW, LMUL and EDIV,
which is quite different from the "V" extension. Therefore, we cannot
simply reuse the processing of vsetvl in V extension.
We have set up tens of thousands of test cases to ensure that no
further encoding issues are there, and and execute all compiled test
files on real HW and make sure they don't trigger SIGILL.
Ref:
[1] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add handling for
th.vsetvli.
(my_getThVsetvliExpression): New function.
(riscv_ip): Likewise.
* testsuite/gas/riscv/x-thead-vector.d: Likewise.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv.h (OP_MASK_XTHEADVLMUL): New macro.
(OP_SH_XTHEADVLMUL): Likewise.
(OP_MASK_XTHEADVSEW): Likewise.
(OP_SH_XTHEADVSEW): Likewise.
(OP_MASK_XTHEADVEDIV): Likewise.
(OP_SH_XTHEADVEDIV): Likewise.
(OP_MASK_XTHEADVTYPE_RES): Likewise.
(OP_SH_XTHEADVTYPE_RES): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Likewise.
* riscv-opc.c: Likewise.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Print instruction description as comment in disassembly with s390
architecture specific option "insndesc":
- For objdump it can be enabled with option "-M insndesc"
- In gdb it can be enabled with "set disassembler-options insndesc"
Since comments are not column aligned the output can enhanced for
readability by postprocessing using a filter such as "expand":
... | expand -t 8,16,24,32,40,80
Or when using in combination with objdump option --visualize-jumps:
... | expand | sed -e 's/ *#/\t#/' | expand -t 1,80
Note that the instruction descriptions add about 128 KB to s390-opc.o:
s390-opc.o without instruction descriptions: 216368 bytes
s390-opc.o with instruction descriptions : 348432 bytes
binutils/
* NEWS: Mention new s390-specific disassembler option
"insndesc".
include/
* opcode/s390.h (struct s390_opcode): Add field to hold
instruction description.
opcodes/
* s390-mkopc.c: Copy instruction description from s390-opc.txt
into generated operation code table s390-opc.tab.
* s390-opc.c (s390_opformats): Provide NULL as description in
.insn pseudo-mnemonics opcode table.
* s390-dis.c: Add s390-specific disassembler option "insndesc"
and optionally print the instruction description as comment in
the disassembly when it is specified.
gas/
* testsuite/gas/s390/s390.exp: Add new test disassembly test
case "zarch-insndesc".
* testsuite/gas/s390/zarch-insndesc.s: New test case for s390-
specific disassembler option "insndesc".
* testsuite/gas/s390/zarch-insndesc.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
This patch add supports for FEAT_SPECRES2 "Enhanced speculation
restriction instructions" adding the "cosp" instruction.
This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is
enabled by the +predres2 march flag.
The description of instructions 'th.fmv.hw.x' and 'th.fmv.x.hw' of the
XTheadFmv extension in T-Head specific is incorrect, and it also has
some impact on the implementation of the binutils, so this patch
corrects this.
For details see:
https://github.com/T-head-Semi/thead-extension-spec/pull/34
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-fmv.d: Correct test.
* testsuite/gas/riscv/x-thead-fmv.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_FMV_HW_X): Correct coding.
(MASK_TH_FMV_HW_X): Likewise.
(MATCH_TH_FMV_X_HW): Likewise.
(MASK_TH_FMV_X_HW): Likewise.
opcodes/ChangeLog:
* riscv-opc.c: Correct operands.
