* ia64-tdep.c (pseudo_regs): New enum that lists gr32-gr127, p0-p63,
bof, and nat0-nat127 as pseudo-registers.
(ia64_frame_cache): New struct used to cache frame info.
(ia64_register_reggroup_p): New routine used to override default
register grouping so registers without names are still saved and
restored.
(ia64_dwarf_reg_to_regnum): New routine to map gr32-gr127 to their
pseudo values.
(ia64_pseudo_register_read): New routine to read pseudo-registers.
(ia64_pseudo_register_write): New routine to write pseudo-registers.
(ia64_alloc_frame_cache): New routine to create a new
ia64_frame_cache.
(examine_prologue): Change prototype to add next_frame pointer.
Assume frameless until otherwise proven. Verify that the cfm for
current frame matches the cfm that should occur for the prologues
alloc insn and if equal, mark as not frameless. At end of routine,
if not frameless, calculate registers for the previous frame and store
in the cache, if a cache is provided.
(ia64_skip_prologue): Use new prototype when calling examine_prologue
and pass 0 for next_frame.
(ia64_store_return_value): Change to use convert_typed_floating()
instead of calling ia64_convert_to_raw().
(ia64_extract_return_value): Change to use convert_typed_floating()
instead of calling ia64_convert_to_virtual().
(ia64_frame_cache): New routine to support new frame model.
(ia64_frame_this_id, ia64_frame_prev_register): Ditto.
(ia64_frame_sniffer): Ditto.
(ia64_sigtramp_frame_init_saved_regs): Ditto.
(ia64_sigtramp_frame_cache, ia64_sigtramp_frame_this_id): Ditto.
(ia64_sigtramp_frame_prev_register): Ditto.
(ia64_sigtramp_frame_sniffer): Ditto.
(ia64_frame_base_address): Ditto.
(ia64_extract_struct_value_address): Change to issue error message.
(ia64_frame_align): New routine to align sp.
(ia64_push_dummy_call): New routine based on ia64_push_arguments().
(ia64_push_arguments): Removed. Logic moved to
ia64_push_dummy_call().
(ia64_push_return_address): Ditto.
(ia64_unwind_dummy_id): New function.
(ia64_unwind_pc): Ditto.
(ia64_convert_register_p): Ditto.
(ia64_register_to_value): Ditto.
(ia64_value_to_register): Ditto.
(ia64_pop_frame, ia64_pop_frame_regular): Removed.
(ia64_register_byte, ia64_register_raw_size): Ditto.
(ia64_register_virtual_size, ia64_register_virtual_byte): Ditto.
(ia64_saved_pc_after_call): Ditto.
(ia64_frame_chain, ia64_frame_saved_pc): Ditto.
(ia64_frame_init_saved_regs, ia64_get_saved_register): Ditto.
(ia64_register_convertible, ia64_register_convert_to_virtual): Ditto.
(ia64_register_convert_to_raw): Ditto.
(ia64_store_struct_return, ia64_call_dummy_words): Ditto.
(ia64_init_extra_frame_info): Ditto.
(ia64_frame_args_address, ia64_frame_locals_address): Ditto.
(ia64_gdbarch_init): Remove registering of deprecated functions that
are no longer used. Add registration of new gdbarch functions.
Remove registering deprecated_write_sp. Replace
set_gdbarch_register_virtual_type() with set_gdbarch_register_type().
Delete set_gdbarch_deprecated_register_convertible(),
set_gdbarch_deprecated_register_convert_to_virtual(), and
set_gdbarch_deprecated_register_convert_to_raw() calls. Remove
set_gdbarch_deprecated_register_size(),
set_gdbarch_deprecated_register_bytes(),
set_gdbarch_pcregnum(),
set_gdbarch_deprecated_register_byte(),
set_gdbarch_deprecated_register_raw_size(),
set_gdbarch_deprecated_max_register_raw_size(),
set_gdbarch_deprecated_register_virtual_size(),
and set_gdbarch_deprecated_max_register_virtual_size() calls.
Replace set_gdbarch_deprecated_extract_return_value() with
set_gdbarch_extract_return_value(). Remove calls to:
set_gdbarch_deprecated_saved_pc_after_call();
set_gdbarch_deprecated_frame_chain(),
set_gdbarch_deprecated_frame_saved_pc(),
set_gdbarch_deprecated_frame_init_saved_regs(),
set_gdbarch_deprecated_get_saved_register(),
set_gdbarch_deprecated_call_dummy_words(),
set_gdbarch_deprecated_sizeof_call_dummy_words(),
set_gdbarch_deprecated_init_extra_frame_info(),
set_gdbarch_deprecated_frame_args_address(),
set_gdbarch_deprecated_frame_locals_address(),
and set_gdbarch_deprecated_dummy_write_sp().
Add set_gdbarch_convert_register_p(),
set_gdbarch_register_to_value(),
set_gdbarch_value_to_register(),
set_gdbarch_push_dummy_call(),
set_gdbarch_frame_align(),
set_gdbarch_unwind_dummy_id(),
set_gdbarch_unwind_pc(),
frame_unwind_append_sniffer(),
frame_unwind_append_sniffer(),
and frame_base_set_default().
* configure.tgt: Document need for special "mipsisa64" handling.
(mipsisa64*-*-linux64): Handle as target linux64.
(mipsisa64*-*-*): Handle as target embed64.
[bfd/ChangeLog]
* coff-i860.c (coff_i860_reloc_nyi): New function.
(howto_table): Add entries for relocations PAIR, HIGHADJ, HIGH,
LOWn, SPLITn, and BRADDR.
(RTYPE2HOWTO): Check that the r_type is within the howto_table
before trying to access the entry.
(coff_i860_rtype_to_howto): Likewise.
(coff_i860_reloc_type_lookup): New function.
(i860_reloc_processing): New function.
(coff_bfd_reloc_type_lookup): Define macro.
(RELOC_PROCESSING): Define macro.
Minor formatting adjustments.
[include/coff/ChangeLog]
* coff/i860.h (COFF860_R_PAIR, COFF860_R_LOW0, COFF860_R_LOW1,
COFF860_R_LOW2, COFF860_R_LOW3, COFF860_R_LOW4, COFF860_R_SPLIT0,
COFF860_R_SPLIT1, COFF860_R_SPLIT2, COFF860_R_HIGHADJ,
COFF860_R_BRADDR): Define new relocation constants and document.
Minor formatting adjustments.
(set_screen_size): New prototype.
(init_page_info): Simplify by fetching the screen size from
Readline. Call set_screen_size.
(set_screen_size): New function.
(set_width): Add missing whitespace in comment.
(set_width_command): Call set_screen_size.
(set_height_command): New function.
(initialize_utils): Fix formatting. Make "set height" command
call set_height_command. Remove redundant code that turns off
pagination if output isn't a terminal. Remove redundant call to
set_width_command.
(sparc64_supply_rwindow, sparc64_fill_rwindow): Remove prototypes.
(sparc_supply_rwindow, sparc_fill_rwindow): New prototypes.
* sparc64-tdep.c (sparc64_pseudo_register_read): Add missing
`case' keyword.
(sparc64_register_info): Give the reister with number
SPARC64_STATE_REGNUM a name.
(sparc64_pseudo_register_write): Add support for %cwp, %pstate,
%asi and %ccr.
(sparc64_push_dummy_call): Take BIAS into account when checking
stcak alignment.
(sparc_software_single_step): Remove assertions that check whether
NPC and NNPC were zero.
(sparc_supply_rwindow): Make public. Merge functionality with
sparc64_supply_rwindow.
(sparc_fill_rwindow): Make public. Merge functionality with
sparc64_fill_rwindow.
(sparc64_supply_rwindow, sparc64_fill_rwindow): Remove.
* sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Set
SPARCBSD_FPREG_SUPPLIES_P to sparc64fbsd_fpreg_supplies_p.
* sparc64fbsd-tdep.c (sparc64fbsd_supply_reg): Call
sparc_supply_rwindow instead of sparc64_supply_rwindow.
2003-08-20 Geoffrey Keating <geoffk@apple.com>
PR 8180
* configure.in: When testing with_libs and with_headers, treat
'no' as unset. Based on a patch by Dan Kegel <dank@kegel.com>.
* configure: Regenerate.
Index: gcc/ChangeLog
2003-08-20 Geoffrey Keating <geoffk@apple.com>
PR 8180
* configure.in: When testing with_libs and with_headers, treat
'no' as unset. Based on a patch by Dan Kegel <dank@kegel.com>.
* configure: Regenerate.
(register_objfile_data, set_objfile_data, objfile_data): New
prototypes.
* objfiles.c (objfile_alloc_data, objfile_free_data): New
prototypes.
(allocate_objfile): Call objfile_alloc_data.
(free_objfile): Call objfile_free_data.
(struct objfile_data): New.
(struct objfile_data_registration): New.
(struct objfile_data_registry): New.
(objfile_data_registry): New variable.
(register_objfile_data): New function.
(objfile_alloc_data, objfile_free_data): New functions.
(set_objfile_data, objfile_data): New functions.
* dwarf2-frame.c (dwarf2_frame_data): New variable.
(dwarf2_frame_find_fde, add_fde): Use new per-objfile data mechanism.
(_initialize_dwarf2_frame): New function and prototype.
* tracepoint.c (trace_dump_command): Trace break address
is subject to DECR_PC_AFTER_BREAK.
(set_traceframe_context): Make "trace_line" an int.
Fixes suggested by Mark Newman <mark.newman@lmco.com>
* sh-tdep.h (struct gdbarch_tdep): New member FLOAT_ARGLAST_REG.
* sh-tdep.c (sh_gdbarch_init): For sh2e, sh3e, and sh4, set
FLOAT_ARG0_REGNUM and FLOAT_ARGLAST_REGNUM, to be used for
argument passing.
(sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu): New
functions, replace sh_push_dummy_call.
(sh_gdbarch_init): Set push_dummy_call to one of new methods.
