Factor out new proc dump_info in test-case gdb.testsuite/dump-system-info.exp,
and in the process:
- fix a few typos
- remove unnecessary "test -r /proc/cpuinfo"
Tested on x86_64-linux.
Co-Authored-By: Pedro Alves <pedro@palves.net>
It is currently not possible to use variables in locations lists. For
example, with:
diff --git a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
index 6b4f5c8cbb8..cdbf948619f 100644
--- a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
+++ b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
@@ -30,6 +30,8 @@ if {![dwarf2_support]} {
return 0
}
+set myconst 0x123456
+
# Test with 32-bit and 64-bit DWARF.
foreach_with_prefix is_64 {false true} {
if { $is_64 } {
@@ -49,6 +51,7 @@ foreach_with_prefix is_64 {false true} {
global func1_addr func1_len
global func2_addr func2_len
global is_64
+ global myconst
# The CU uses the DW_FORM_loclistx form to refer to the .debug_loclists
# section.
@@ -107,7 +110,7 @@ foreach_with_prefix is_64 {false true} {
list_ {
# When in func1.
start_length $func1_addr $func1_len {
- DW_OP_constu 0x123456
+ DW_OP_constu $myconst
DW_OP_stack_value
}
we get:
$ make check TESTS="*/loclists-multiple-cus.exp"
...
gdb compile failed, build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S: Assembler messages:
build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S:78: Error: leb128 operand is an undefined symbol: $myconst
...
That means $myconst was copied literally to the generated assembly
file.
This patch fixes it, by running subst on the location list body, in
the context of the caller. The fix is applied to both
Dwarf::loclists::table::list_::start_length and
Dwarf::loclists::table::list_::start_end.
Reported-by: Zoran Zaric <Zoran.Zaric@amd.com>
Change-Id: I615a64431857242d9f477d5699e3732df1b31322
When running test-case gdb.dwarf2/implptr-64bit.exp with target board
unix/-m32, I noticed:
...
DUPLICATE: gdb.dwarf2/implptr-64bit.exp: failed to prepare
...
Fix this by using with_test_prefix.
Tested on x86_64-linux.
Fix these DUPLICATEs by using with_test_prefix:
...
DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 1
DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 2
...
Tested on x86_64-linux.
When doing a testrun with:
...
$ make check RUNTESTFLAGS=$(cd $src/gdb/testsuite/; echo gdb.dwarf2/*.exp)
...
I ran into:
...
ERROR: tcl error sourcing gdb.dwarf2/dw2-is-stmt.exp.
ERROR: expected integer but got "dw2-abs-hi-pc-world.c"
while executing
"incr i"
...
The variable i is set in gdb.dwarf2/dw2-abs-hi-pc.exp, and leaks to
gdb.dwarf2/dw2-is-stmt.exp. It's not removed by gdb_cleanup_globals because i
is set as global variable by runtest.exp, which does:
...
for { set i 0 } { $i < $argc } { incr i } {
...
at toplevel but forgets to unset the variable.
Fix this by removing '$' in front of the variable name when doing set:
...
-set $i 0
+set i 0
...
Tested on x86_64-linux.
Fix this duplicate:
...
DUPLICATE: gdb.base/load-command.exp: check initial value of the_variable
...
by using with_test_prefix.
Tested on x86_64-linux.
I noticed two test-case that use ldflags=-pie and ldflags-no-pie, instead of
the canonical pie and nopie options, which would typically also add
additional_flags=-fPIE respectively additional_flags=-fno-pie.
There is no indication that this is on purpose, so replace these with pie and
nopie.
Tested on x86_64-linux.
When interpreting the testsuite results, it's often relevant what kind of
machine the testsuite ran on. On a local machine one can just do
/proc/cpuinfo, but in case of running tests using a remote system
that distributes test runs to other remote systems that are not directly
accessible, that's not possible.
Fix this by dumping /proc/cpuinfo into the gdb.log, as well as lsb_release -a
and uname -a.
We could do this at the start of each test run, by putting it into unix.exp
or some such. However, this might be too verbose, so we choose to put it into
its own test-case, such that it get triggered in a full testrun, but not when
running one or a subset of tests.
We put the test-case into the gdb.testsuite directory, which is currently the
only place in the testsuite where we do not test gdb. [ Though perhaps this
could be put into a new gdb.info directory, since the test-case doesn't
actually test the testsuite. ]
Tested on x86_64-linux.
I noticed that pointer_type is declared in language.h and defined in
language.c. However, it really has to do with types, so it should
have been in gdbtypes.h all along.
This patch changes it to be a method on struct type. And, I went
through uses of TYPE_IS_REFERENCE and updated many spots to use the
new method as well. (I didn't update ones that were in arch-specific
code, as I couldn't readily test that.)
When running gdb.rust/*.exp test-cases with target board unix/-fPIE/-pie, I
run into:
...
builtin_spawn -ignore SIGHUP rustc --color never gdb.rust/watch.rs \
-g -lm -fPIE -pie -o outputs/gdb.rust/watch/watch^M
error: Unrecognized option: 'f'^M
^M
compiler exited with status 1
...
The problem is that -fPIE and -fpie are gcc options, but for rust we use
rustc, which has different compilation options.
Fix this by translating the gcc options to rustc options in gdb_compile_rust,
similar to how that is done for ada in target_compile_ada_from_dir.
Likewise for unix/-fno-PIE/-no-pie.
Tested on x86_64-linux, with:
- native
- unix/-fPIE/-pie
- unix/-fno-PIE/-no-pie
specifically, on openSUSE Leap 15.2 both with package gcc-PIE:
- installed (making gcc default to PIE)
- uninstalled (making gcc default to non-PIE).
and rustc 1.52.1.
Replace {additional_flags=-fPIE ldflags=-pie} with {pie}.
This makes sure that the test-cases properly error out when using target board
unix/-fno-PIE/-no-pie.
Tested on x86_64-linux.
When running test-case gdb.base/break-interp.exp on ubuntu 18.04.5, we have:
...
(gdb) bt^M
#0 0x00007eff7ad5ae12 in ?? () from break-interp-LDprelinkNOdebugNO^M
#1 0x00007eff7ad71f50 in ?? () from break-interp-LDprelinkNOdebugNO^M
#2 0x00007eff7ad59128 in ?? () from break-interp-LDprelinkNOdebugNO^M
#3 0x00007eff7ad58098 in ?? () from break-interp-LDprelinkNOdebugNO^M
#4 0x0000000000000002 in ?? ()^M
#5 0x00007fff505d7a32 in ?? ()^M
#6 0x00007fff505d7a94 in ?? ()^M
#7 0x0000000000000000 in ?? ()^M
(gdb) FAIL: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: \
first backtrace: dl bt
...
Using the backtrace, the test-case tries to establish that we're stopped in
dl_main.
However, the backtrace only shows an address, because:
- the dynamic linker contains no minimal symbols and no debug info, and
- gdb is build without --with-separate-debug-dir so it can't find the
corresponding .debug file, which does contain the mimimal symbols and
debug info.
As in "[gdb/testsuite] Improve probe detection in gdb.base/break-probes.exp",
fix this by doing info probes and grepping for the address.
Tested on x86_64-linux.
When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have:
...
(gdb) run^M
Starting program: break-probes^M
Stopped due to shared library event (no libraries added or removed)^M
(gdb) bt^M
#0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#4 0x0000000000000001 in ?? ()^M
#5 0x00007fffffffdaac in ?? ()^M
#6 0x0000000000000000 in ?? ()^M
(gdb) UNSUPPORTED: gdb.base/break-probes.exp: probes not present on this system
...
Using the backtrace, the test-case tries to establish that we're stopped in
dl_main, which is used as proof that we're using probes.
However, the backtrace only shows an address, because:
- the dynamic linker contains no minimal symbols and no debug info, and
- gdb is build without --with-separate-debug-dir so it can't find the
corresponding .debug file, which does contain the mimimal symbols and
debug info.
Fix this by instead printing the pc and grepping for the value in the
info probes output:
...
(gdb) p /x $pc^M
$1 = 0x7ffff7dd6e12^M
(gdb) info probes^M
Type Provider Name Where Object ^M
...
stap rtld init_start 0x00007ffff7dd6e12 /lib64/ld-linux-x86-64.so.2 ^M
...
(gdb)
...
Tested on x86_64-linux.
When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have:
...
(gdb) bt^M
#0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M
#4 0x0000000000000001 in ?? ()^M
#5 0x00007fffffffdaac in ?? ()^M
#6 0x0000000000000000 in ?? ()^M
(gdb) FAIL: gdb.base/break-probes.exp: ensure using probes
...
The test-case intends to emit an UNTESTED in this case, but fails to do so
because it tries to do it in a regexp clause in a gdb_test_multiple, which
doesn't trigger. Instead, a default clause triggers which produces the FAIL.
Also the use of UNTESTED is not appropriate, and we should use UNSUPPORTED
instead.
Fix this by silencing the FAIL, and emitting an UNSUPPORTED after the
gdb_test_multiple:
...
if { ! $using_probes } {
+ unsupported "probes not present on this system"
return -1
}
...
Tested on x86_64-linux.
This adds a testcase that tests that the unwinder produces consistent
frame info and frame IDs by making sure that "info frame" shows the
same result when stopped at a function (level == 0), compared to when
we find the same frame in the stack at a level > 0.
E.g., on x86-64, right after running to main, we see:
(gdb) info frame
Stack level 0, frame at 0x7fffffffd340:
rip = 0x555555555168 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3
source language c.
Arglist at 0x7fffffffd330, args:
Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340
Saved registers:
rbp at 0x7fffffffd330, rip at 0x7fffffffd338
(gdb)
and then after continuing to a function called by main, and selecting
the "main" frame again, we see:
(gdb) info frame
Stack level 3, frame at 0x7fffffffd340:
rip = 0x555555555172 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3
caller of frame at 0x7fffffffd330
source language c.
Arglist at 0x7fffffffd330, args:
Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340
Saved registers:
rbp at 0x7fffffffd330, rip at 0x7fffffffd338
(gdb)
The only differences should be in the stack level, the 'rip = '
address, and the presence of the "caller of frame at" info. All the
rest should be the same. If it isn't, it probably means that the
frame base, the frame ID, etc. aren't stable & consistent.
The testcase exercises both the DWARF and the heuristic unwinders,
using "maint set dwarf unwinder on/off".
Tested on {x86-64 -m64, x86-64 -m32, Aarch64, Power8} GNU/Linux.
Change-Id: I795001c82cc70d543d197415e3f80ce5dc7f3452
get_ada_task_ptid currently takes a 'long' as its 'thread' parameter
type. However, on some platforms this is actually a pointer, and
using 'long' can sometimes end up with the value being sign-extended.
This sign extension can cause problems later, if the tid is then later
used as an address again.
This patch changes the parameter type to ULONGEST and updates all the
uses. This approach preserves sign extension on the targets where it
is apparently intended, while avoiding it on others.
Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
The ptid_t 'tid' member is normally used as an address in gdb -- both
bsd-uthread and ravenscar-thread use it this way. However, because
the type is 'long', this can cause problems with sign extension.
This patch changes the type to ULONGEST to ensure that sign extension
does not occur.
I wanted to find, and potentially modify, all the spots where the
'tid' parameter to the ptid_t constructor was used. So, I temporarily
removed this parameter and then rebuilt.
In order to make it simpler to search through the "real" (nonzero)
uses of this parameter, something I knew I'd have to do multiple
times, I removed any ", 0" from constructor calls.
Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
With test-case gdb.python/py-events.exp on ubuntu 18.04.5 we run into:
...
(gdb) info threads^M
Id Target Id Frame ^M
* 1 Thread 0x7ffff7fc3740 (LWP 31467) "py-events" do_nothing () at \
src/gdb/testsuite/gdb.python/py-events-shlib.c:19^M
(gdb) FAIL: gdb.python/py-events.exp: get current thread
...
The info thread commands uses "Thread" instead of "process" because
libpthread is already loaded:
...
new objfile name: /lib/x86_64-linux-gnu/libdl.so.2^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".^M
event type: new_objfile^M
new objfile name: /lib/x86_64-linux-gnu/libpthread.so.0^M
...
and consequently thread_db_target::pid_to_str is used.
Fix this by parsing the "Thread" expression.
Tested on x86_64-linux.
The print_one_insn selftest in gdb/disasm-selftests.c contains:
...
/* If you want to see the disassembled instruction printed to gdb_stdout,
set verbose to true. */
static const bool verbose = false;
...
Make this parameter available in the maint selftest command using a new option
-verbose, such that we can do:
...
(gdb) maint selftest -verbose print_one_insn
...
Tested on x86_64-linux.
This is a testcase for the bug fixed by commit 5b4846283c3d. When
running the testcase on ia64 targets I found timeouts along with lots
of memory being consumed, due to ia64 gas not tracking text
sub-sections. Trying to add nops for ".nop 16" in ".text 1" resulting
in them being added to subsegment 0, with no increase to subsegment 1
size. This patch also fixes that problem.
Note that the testcase fails on ft32-elf, mn10200-elf, score-elf,
tic5x-elf, and xtensa-elf. The first two are relocation errors, the
last three appear to be the .nop directive failing to emit the right
number of nops. I didn't XFAIL any of them.
* config/tc-ia64.c (md): Add last_text_subseg.
(ia64_flush_insns, dot_endp): Use last_text_subseg.
(ia64_frob_label, md_assemble): Set last_text_subseg.
* testsuite/gas/elf/dwarf2-21.d,
* testsuite/gas/elf/dwarf2-21.s: New test.
* testsuite/gas/elf/elf.exp: Run it.
In test-case gdb.base/gdb-caching-proc.exp, we run all procs declared with
gdb_caching_proc. Some of these require a gdb instance, some not.
We could just do a clean_restart every time, but that would amount to 44 gdb
restarts. We try to minimize this by doing this only for the few procs that
need it, and hardcoding those in the test-case.
For those procs, we do a clean_restart, execute the proc, and then do a
gdb_exit, to make sure the gdb instance doesn't linger such that we detect
procs that need a gdb instance but are not listed in the test-case.
However, that doesn't work in the case of gnat_runtime_has_debug_info. This
proc doesn't require a gdb instance because it starts its own. But it doesn't
clean up the gdb instance, and since it's not listed, the test-case
doesn't clean up the gdb instance eiter. Consequently, the proc
supports_memtag (which should be listed, but isn't) uses the gdb instance
started by gnat_runtime_has_debug_info rather than throwing an error. Well,
unless gnat_runtime_has_debug_info fails before starting a gdb instance, in
which case we do run into the error.
Fix this by:
- doing gdb_exit unconditionally
- fixing the resulting error by adding supports_memtag in the test-case to
the "needing gdb instance" list
Tested on x86_64-linux.
For some reason these two weren't added to the list when they were orginally
added to GDB.
gdb/doc/ChangeLog:
2021-09-21 Felix Willgerodt <felix.willgerodt@intel.com>
* gdb.texinfo (Predefined Target Types): Mention ieee_half and bfloat16.
When running test-case gdb.ada/interface.exp with gcc-9, we run into:
...
(gdb) info locals^M
s = (x => 1, y => 2, w => 3, h => 4)^M
r = (x => 1, y => 2, w => 3, h => 4)^M
(gdb) FAIL: gdb.ada/interface.exp: info locals
...
The failure is caused by the regexp expecting variable r followed by
variable s.
Fix this by allowing variable s followed by variable r as well.
Tested on x86_64-linux.
In gdb/disasm-selftests.c we have:
...
selftests::register_test_foreach_arch ("print_one_insn",
selftests::print_one_insn_test);
...
and we get:
...
$ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \
| grep ^Running
Running selftest print_one_insn.
$
...
Change the semantics register_test_foreach_arch such that a version of
print_one_insn is registered for each architecture, such that we have:
...
$ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \
| grep ^Running
Running selftest print_one_insn::A6.
Running selftest print_one_insn::A7.
Running selftest print_one_insn::ARC600.
...
$
...
This makes it f.i. possible to do:
...
$ gdb -q -batch a.out -ex "maint selftest print_one_insn::armv8.1-m.main"
Running selftest print_one_insn::armv8.1-m.main.
Self test failed: self-test failed at src/gdb/disasm-selftests.c:165
Ran 1 unit tests, 1 failed
...
Tested on x86_64-linux with an --enable-targets=all build.
Change register_test to use std::function arg, such that we can do:
...
register_test (test_name, [=] () { SELF_CHECK (...); });
...
Tested on x86_64-linux.
With test-case gdb.ada/big_packed_array.exp and target board unix/-m32 I run
into:
...
(gdb) print bad^M
$2 = (0 => 0 <repeats 24 times>, 160)^M
(gdb) FAIL: gdb.ada/big_packed_array.exp: scenario=minimal: print bad
...
The problem is that while the variable is an array of 196 bits (== 24.5 bytes),
the debug information describes it as 25 unsigned char. This is PR
gcc/101643, and the test-case contains an xfail for this, which catches only:
...
(gdb) print bad^M
$2 = (0 => 0 <repeats 25 times>)^M
...
Fix this by updating the xfail pattern.
Tested on x86_64-linux.
Bug 28341 shows that GDB fails to compile when built with -std=c++11.
I don't know much about the use case, but according to the author of the
bug:
I encountered the scenario where CXX is set to "g++ -std=c++11" when
I try to compile binutils under GCC as part of the GCC 3-stage
compilation, which is common for building a cross-compiler.
The author of the bug suggests using __typeof__ instead of typeof. But
since we're using C++, we might as well use decltype, which is standard.
This is what this patch does.
The failure (and fix) can be observed by configuring GDB with CXX="g++
-std=c++11":
CXX linux-low.o
In file included from /home/simark/src/binutils-gdb/gdbserver/gdb_proc_service.h:22,
from /home/simark/src/binutils-gdb/gdbserver/linux-low.h:27,
from /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:20:
/home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:177:50: error: expected constructor, destructor, or type conversion before (token
177 | __attribute__((visibility ("default"))) typeof (SYM) SYM
| ^
/home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:179:1: note: in expansion of macro PS_EXPORT
179 | PS_EXPORT (ps_get_thread_area);
| ^~~~~~~~~
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28341
Change-Id: I84fbaae938209d8d935ca08dec9b7e6a0dd1bda0
When the RISC-V disassembler encounters an unknown instruction, it
currently just prints the value of the bytes, like this:
Dump of assembler code for function custom_insn:
0x00010132 <+0>: addi sp,sp,-16
0x00010134 <+2>: sw s0,12(sp)
0x00010136 <+4>: addi s0,sp,16
0x00010138 <+6>: 0x52018b
0x0001013c <+10>: 0x9c45
My proposal, in this patch, is to change the behaviour to this:
Dump of assembler code for function custom_insn:
0x00010132 <+0>: addi sp,sp,-16
0x00010134 <+2>: sw s0,12(sp)
0x00010136 <+4>: addi s0,sp,16
0x00010138 <+6>: .4byte 0x52018b
0x0001013c <+10>: .2byte 0x9c45
Adding the .4byte and .2byte opcodes. The benefit that I see here is
that in the patched version of the tools, the disassembler output can
be fed back into the assembler and it should assemble to the same
binary format. Before the patch, the disassembler output is invalid
assembly.
I've started a RISC-V specific test file under binutils so that I can
add a test for this change.
binutils/ChangeLog:
* testsuite/binutils-all/riscv/riscv.exp: New file.
* testsuite/binutils-all/riscv/unknown.d: New file.
* testsuite/binutils-all/riscv/unknown.s: New file.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Print a .%dbyte opcode
before an unknown instruction, '%d' is replaced with the
instruction length.
Fixes segfaults when building aarch64-linux kernel, due to only doing
part of the work necessary when allocating file numbers late. I'd
missed looping over subsegments, which resulted in some u.filename
entries left around and later interpreted as u.view.
PR 28149
* dwarf2dbg.c (purge_generated_debug): Iterate over subsegs too.
(dwarf2_finish): Call do_allocate_filenum for all subsegs too,
in a separate loop before subsegs are chained.
--enable-targets=all on a 32-bit host results in a link failure with
undefined references due to elfxx-mips.c not being compiled. This
patch fixes that by putting eelf_mipsel_haiki.c in the correct
EMULATION_SOURCES Makefile variable. I've also added a bunch of
missing file dependencies and sorted a few things so that it's easier
to verify dependencies are present.
* Makfile.am: Add missing haiku dependencies, sort.
(ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to..
(ALL_64_EMULATION_SOURCES): ..here. Sort.
* Makfile.in: Regenerate.
Don't set version info on unversioned symbols when seeing a hidden
versioned symbol after an unversioned definition and the default
versioned symbol.
bfd/
PR ld/28348
* elflink.c (elf_link_add_object_symbols): Don't set version info
on unversioned symbols.
ld/
PR ld/28348
* testsuite/ld-elf/pr28348.rd: New file.
* testsuite/ld-elf/pr28348.t: Likewise.
* testsuite/ld-elf/pr28348a.c: Likewise.
* testsuite/ld-elf/pr28348b.c: Likewise.
* testsuite/ld-elf/pr28348c.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/28348 tests.
The @inforef command is deprecated, and @xref does the samething.
Also had to update the text capitalization to match current manual.
Verified that info & HTML links work.
Now gdb is capable of debugging executable, which consists of multiple
compilation units (CUs) with the CTF debug info. An executable could
potentially have one or more archives, which, in CTF context, contain
conflicting types.
all changes were made in ctfread.c in which elfctf_build_psymtabs was
modified to handle archives, via the ctf archive iterator and its callback
build_ctf_archive_member and scan_partial_symbols was modified to scan
archives, which are treated as subfiles, to build the psymtabs.
Also changes were made to handle CTF's data object section and function
info section which now share the same format of their contents - an array
of type IDs. New functions ctf_psymtab_add_stt_entries, which is called by
ctf_psymtab_add_stt_obj and ctf_psymtab_add_stt_func, and add_stt_entries,
which is called by add_stt_obj and add_stt_func when setting up psymtabs
and full symtab, respectively.
When running test-case gdb.server/server-kill.exp with target board unix/-m32,
I run into:
...
0xf7fd6b20 in _start () from /lib/ld-linux.so.2^M
(gdb) Executing on target: kill -9 13082 (timeout = 300)
builtin_spawn -ignore SIGHUP kill -9 13082^M
bt^M
(gdb) FAIL: gdb.server/server-kill.exp: kill_pid_of=server: test_unwind_syms: bt
...
The test-case expects the backtrace command to trigger remote communication,
which then should result in a "Remote connection closed" or similar.
However, no remote communication is triggered, because we hit the "Check that
this frame is unwindable" case in get_prev_frame_always_1.
We don't hit this problem in the kill_pid_of=inferior case, because there we
run to main before doing the backtrace.
Fix this by doing the same in the kill_pid_of=server case.
Tested on x86_64-linux.
With current master and gcc 7.5.0/8.5.0, we have this timeout:
...
(gdb) print s^M
Multiple matches for s^M
[0] cancel^M
[1] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:20^M
[2] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:?^M
> FAIL: gdb.ada/interface.exp: print s (timeout)
...
[ The FAIL doesn't reproduce with gcc 9.3.1. This difference in
behaviour bisects to gcc commit d70ba0c10de.
The FAIL with earlier gcc bisects to gdb commit ba8694b650b. ]
The FAIL is caused by gcc generating this debug info describing a named
artificial variable:
...
<2><1204>: Abbrev Number: 31 (DW_TAG_variable)
<1205> DW_AT_name : s.14
<1209> DW_AT_type : <0x1213>
<120d> DW_AT_artificial : 1
<120d> DW_AT_location : 5 byte block: 91 e0 7d 23 18 \
(DW_OP_fbreg: -288; DW_OP_plus_uconst: 24)
...
An easy way to fix this would be to simply not put named artificial variables
into the symbol table. However, that causes regressions for Ada. It relies
on being able to get the value from such variables, using a named reference.
Fix this instead by marking the symbol as artificial, and:
- ignoring such symbols in ada_resolve_variable, which fixes the FAIL
- ignoring such ada symbols in do_print_variable_and_value, which prevents
them from showing up in "info locals"
Note that a fix for the latter was submitted here (
https://sourceware.org/pipermail/gdb-patches/2008-January/054994.html ), and
this patch borrows from it.
Tested on x86_64-linux.
Co-Authored-By: Joel Brobecker <brobecker@adacore.com>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28180
Mixing compiler generated line info with gas generated line info is
generally just confusing. Also .loc directives with non-zero view
fields might reference a previous .loc. It becomes a little more
tricky to locate that previous .loc if there might be gas generated
line info present too. Mind you, we turn off gas generation of line
info on seeing compiler generated line info, so any reference back
won't hit gas generated line info. At least, if the view info is
sane. Unfortunately, gas needs to handle mangled source.
PR 28149
* dwarf2dbg.c (purge_generated_debug): New function.
(dwarf2_directive_filename): Call the above.
(out_debug_line): Don't segfault after purging.
* testsuite/gas/i386/dwarf2-line-4.d: Update expected output.
* testsuite/gas/i386/dwarf4-line-1.d: Likewise.
* testsuite/gas/i386/dwarf5-line-1.d: Likewise.
* testsuite/gas/i386/dwarf5-line-2.d: Likewise.
