PR sim/8388
* armemu.c (WriteR15Load): New function. Determines if the state
can be changed upon a write to R15.
(LoadMult): Use WriteR15Load.
* armemu.h (WRITEDESTB): Use WriteR15Load.
From: Jayant R. Sonar <Jayant.Sonar@kpitcummins.com>
This patch adds simulator support for handling the armv7 instructions
'movw (immediate)' and 'movt'.
Compiler frequently use these instructions to load the 32bit addresses of
global variables, string pointers etc. into the general registers.
In absence of support of these instructions:
1. GDB run simulator fails to print even simple "hello world" string
on console.
2. Loading of global variable addresses into the registers fail causing
arithmetic operation failures.
Patch has been regression tested for arm-none-eabi (-march=armv7-a).
* armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
available.
* armemu.c: Use them.
* armvirt.c (ARMul_MemoryInit): Use correct type for size.
* configure.ac: Check for stdint.h.
* config.in: Regenerate.
* configure: Regenerate.
(ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is found.
* armdefs.h (struct ARMul_State): Add new field: is_v6.#
(ARM_v6_Prop): Define.
* arminit.c (ARMul_NewState): Initialise the v6 flag.
(ARMul_SelectProcessor): Determine if the v6 flag should be set.
* wrapper.c (sim_create_inferior): For unknown architectures, default to allowing the v6 instructions.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
2000-03-11 Philip Blundell <philb@gnu.org>
* armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
Patch from Allan Skillman <Allan.Skillman@arm.com>.
