* i387-tdep.c (i387_supply_register): When called with NULL as a
buffer, mark the register as not provided (to mirror the behavior
of supply_register).
(i387_supply_fxsave): Ditto.
(i387_supply_fsave): Ditto (inherits the behavior from
i387_supply_register).
* i387-tdep.c (print_i387_value, print_i387_ext,
print_i387_status_word, print_i387_control_word): Add `struct
ui_file *' argument and use it for output.
(i387_print_float_info): Renamed from i387_float_info. Add
`struct gdbarch *' and `struct ui_file *' arguments and use the
latter for output.
* i386-tdep.c: Include "i387-tdep.h".
(i386_gdbarch_init): Set print_float_info.
* config/i386/tm-i386.h (i387_float_info): Remove prototype.
(FLOAT_INFO): Remove define.
Testing: I tested on native Red Hat Linux 7 using gcc 3.0.
The "info float" command exercises print_i387_value.
2001-07-06 Michael Chastain <chastain@redhat.com>
* i387-tdep.c (print_i387_value): Fix pointer glitch.
===
Index: i387-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/i387-tdep.c,v
retrieving revision 1.11
diff -c -1 -0 -p -r1.11 i387-tdep.c
*** gdb/i387-tdep.c 2001/07/04 21:14:05 1.11
--- gdb/i387-tdep.c 2001/07/06 12:47:00
*************** print_i387_value (char *raw)
*** 163,184 ****
DOUBLEST value;
int len = TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT;
char *tmp = alloca (len);
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (&tmp, raw, FPU_REG_RAW_SIZE);
! memset (&tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
--- 163,184 ----
DOUBLEST value;
int len = TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT;
char *tmp = alloca (len);
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (tmp, raw, FPU_REG_RAW_SIZE);
! memset (tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
* command.c copying.c copying.awk core-aout.c core-regset.c
corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c
infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c
symmisc.c valarith.c: Add prototypes.
* defs.h: Add prototype for utils.c::do_run_cleanups.
* gdbtypes.c: Add prototypes.
(make_pointer_type): Add braces to remove nested if-else ambiguity.
(make_reference_type): Ditto.
* printcmd.c (printf_command): Initialize 'f' and 'string' at
function startup to suppress possibly-used-before-initialized warning.
* remote-utils.c: Add prototypes.
(sr_pollchar): Add braces to remove nested if-else ambiguity.
* ser-tcp.c: Add prototypes.
(wait_for): Add braces to remove nested if-else ambiguity.
(tcp_readchar): Ditto.
* ser-unix.c: Add prototypes.
(get_tty_state): Don't define errno here.
(get_tty_state): Don't define errno here.
(hardwire_readchar): Only define 't' if we are compiling in a Cygwin
environment.
* symtab.c: Add prototypes.
(find_methods): Add braces to remove nested if-else ambiguity.
(search_symbols): Set 'i' to an initial value to suppress a
possibly-used-before-initialized warning.
* valops.c: Add prototypes.
(value_cast): Set 'eltype2' to an initial value to suppress a
possibly-used-before-initialized warning.
(value_of_variable): Add braces to remove nested if-else ambiguity.
(value_of_this): Ditto.
* valprint.c: Add prototypes.
(print_floating): Add braces to remove nested if-else ambiguity.
Looks like a big change, but it is really just a lot of small stuff.
In the cases where GCC was flagging a possible use-before-initialized
warning on variables, it turned out that these were being used properly
but GCC couldn't see that.
passing them to print_387_status.
(print_387_status): Don't subtract top from 7 before using it.
* i387-tdep.c: Remove comment about AIX wanting "top" subtracted
from 7; the above explains it.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
* configure.in: Use them.
* alldeps.mak: List them.
* coffread.c (decode_base_type): Deal with anonymous enum type.
* i387-tdep.c (print_387_status_word): Add comment re "top".
* i386-tdep.c [I386_AIX_TARGET] (i386_extract_return_value): New func.
* dbxread.c: Use SEEK_SET and SEEK_CUR, not L_*. Define them if and
only if not defined by a header file.
* mipsread.c: Don't define L_SET or L_INCR.
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
* tm-68k.h (FPI_REGNUM): Add.
* infrun.c (child_create_inferior): flush stdout and stderr
before forking.
* configure.in: Handle amigados, amix hosts and targets.
* inflow.c: Handle TIOCGLTC_BROKEN for Amiga.
From Andreas Schwab:
* values.c (show_convenience): Use printf_filtered.
* main.c (define_command): Check result of lookup_command for
exact match.
(echo_command): Use printf_filtered, and force output out.
* dbxread.c (read_enum_type): Avoid Modula-2 kludge that breaks C
programs.
* i387-tdep.c (double_to_i387): Fix typo for double_to_ieee_extended.
* utils.c (_initialize_utils): If !ISATTY, don't paginate.
