LoongArch defines hardware watchpoint functions for fetch operations.
After the software configures the watchpoints for fetch, the processor
hardware will monitor the access addresses of the fetch operations and
trigger a watchpoint exception when the watchpoint setting conditions
are met.
Hardware watchpoints for fetch operations is used to implement hardware
breakpoint function on LoongArch. Refer to the following document for
hardware breakpoint.
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
A simple test is as follows:
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
without this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) hbreak 8
No hardware breakpoint support in the target.
with this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) hbreak 8
Hardware assisted breakpoint 2 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 2, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 25378) exited normally]
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
LoongArch defines hardware watchpoint functions for load/store
operations. After the software configures the watchpoints for
load/store, the processor hardware will monitor the access
addresses of the load/store operations and trigger watchpoint
exception when the watchpoint setting conditions are met.
After this patch, watch/rwatch/awatch command are supported. Refer to the
following document for hardware watchpoint.
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
A simple test is as follows:
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
without this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Target does not support this type of hardware watchpoint.
...
with this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Hardware access (read/write) watchpoint 2: a
(gdb) c
Continuing.
start test
Hardware access (read/write) watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
Hardware access (read/write) watchpoint 2: a
Value = 1
0x00000001200006e0 in main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
end test
[Inferior 1 (process 22250) exited normally]
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
This function is only used by gas, so move it there. Necessary for
gas to keep track of group sections as they are created.
PR 25333
bfd/
* elf32-xtensa.c (xtensa_make_property_section): Delete.
(xtensa_property_section_name): Make public.
include/
* elf/xtensa.h (xtensa_make_property_section): Delete.
(xtensa_property_section_name): Declare
gas/
* config/tc-xtensa.c (xtensa_make_property_section): New,
moved from elf32-xtensa.c.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Add new relocs number for tls le relax.
include/ChangeLog:
* elf/loongarch.h:
(RELOC_NUMBER (R_LARCH_TLS_LE_HI20_R, 121)): New relocs number.
(RELOC_NUMBER (R_LARCH_TLS_LE_ADD_R, 122)): Likewise.
(RELOC_NUMBER (R_LARCH_TLS_LE_LO12_R, 123)): Likewise.
For
add name@gottpoff(%rip), %reg
mov name@gottpoff(%rip), %reg
add
# define R_X86_64_CODE_4_GOTTPOFF 44
and for
lea name@tlsdesc(%rip), %reg
add
# define R_X86_64_CODE_4_GOTPC32_TLSDESC 45
if the instruction starts at 4 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF and R_X86_64_GOTPC32_TLSDESC,
respectively. Linker can covert GOTTPOFF to
add $name@tpoff, %reg
mov $name@tpoff, %reg
and GOTPC32_TLSDESC to
mov $name@tpoff, %reg
mov name@gottpoff(%rip), %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTTPOFF
and BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_assemble): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
(output_insn): Don't add empty REX prefix with REX2 prefix.
(output_disp): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_apply_fix): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTTPOFF or
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC if ixp->fx_tcbit3 is set.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* testsuite/gas/i386/x86-64-gottpoff.d: New file.
* testsuite/gas/i386/x86-64-gottpoff.s: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.d: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.s: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC
ld/
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC tests.
Define NT_X86_SHSTK which is the note for x86 Shadow Stack (SHSTK) to
support Intel SHSTK in Linux kernel.
For now only userspace shadow stack and kernel IBT are supported by the
linux kernel. This note should be used instead of NT_X86_CET introduced
in the commit "x86: Add NT_X86_CET note", as it is outdated and only
used by old binutils versions.
R_LARCH_CALL36 is used for medium code model function call pcaddu18i+jirl, and
these two instructions must adjacent.
The LoongArch ABI v2.20 at here: https://github.com/loongson/la-abi-specs.
Just the lightest modifications about this, without any further checks and
considering --emit-relocs. We will need to improve it in the future, but
first do this to avoid conflicts between linker internal relocations and the
new definition of psabi. For example, TLSDESC relocs.
Passed riscv-gnu-toolchain regressions, so should be safe enough to commit.
Co-authored-by: Tsukasa OI <research_trasio@irq.a4lg.com>
bfd/
* reloc.c: Removed linker internal relocations.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elfnn-riscv.c: Defined R_RISCV_DELETE in include/elf/riscv.h.
* elfxx-riscv.c (howto_table, howto_table_internal): Moved linker
internal relocations from howto_table into howto_table_internal.
(riscv_reloc_map): Removed linker internal relocations mapping.
(riscv_elf_rtype_to_howto): Return howto of linker internal
relocations from howto_table_internal.
include/
* elf/riscv.h: Defined linker internal relocations after R_RISCV_max.
This patch adds the R_MICROBLAZE_32_NONE relocation type.
This is a 32-bit reloc that stores the 32-bit pc relative
value in two words (with an imm instruction).
Add test case to gas test suite.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michael J. Eager <eager@eagercon.com>
Linux kernel commit commit 317c8194e6ae ("rseq: Introduce feature size
and alignment ELF auxiliary vector entries") introduced two new auxvs:
AT_RSEQ_FEATURE_SIZE and AT_RSEQ_ALIGN. Support them in GDB. This
fixes auxv.exp on kernels >= v6.3.
Change-Id: I8966c4d5c73eb7b45de6d410a9b28a6628edad2e
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30540
Approved-By: Tom Tromey <tom@tromey.com>
The PLT entry in executables and shared libraries contains an indirect
branch, like
jmp *foo@GOTPCREL(%rip)
push $index_foo
jmp .PLT0
or
endbr64
jmp *foo@GOTPCREL(%rip)
NOP padding
which is used to branch to the function, foo, defined in another object.
Each R_X86_64_JUMP_SLOT relocation has a corresponding PLT entry.
The dynamic tags have been added to the x86-64 psABI to mark such PLT
entries:
6d824a52a4
Add an x86-64 linker option, -z mark-plt, to mark PLT entries with
#define DT_X86_64_PLT (DT_LOPROC + 0)
#define DT_X86_64_PLTSZ (DT_LOPROC + 1)
#define DT_X86_64_PLTENT (DT_LOPROC + 3)
1. DT_X86_64_PLT: The address of the procedure linkage table.
2. DT_X86_64_PLTSZ: The total size, in bytes, of the procedure linkage
table.
3. DT_X86_64_PLTENT: The size, in bytes, of a procedure linkage table
entry.
and set the r_addend field of the R_X86_64_JUMP_SLOT relocation to the
memory offset of the indirect branch instruction. The dynamic linker
can use these tags to update the PLT section to direct branch.
bfd/
* elf-linker-x86.h (elf_linker_x86_params): Add mark_plt.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Set the
r_addend of R_X86_64_JUMP_SLOT to the indirect branch offset
in PLT entry for -z mark-plt.
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Add
DT_X86_64_PLT, DT_X86_64_PLTSZ and DT_X86_64_PLTENT for
-z mark-plt.
(_bfd_x86_elf_finish_dynamic_sections): Set DT_X86_64_PLT,
DT_X86_64_PLTSZ and DT_X86_64_PLTENT.
(_bfd_x86_elf_get_synthetic_symtab): Ignore addend for
JUMP_SLOT relocation.
(_bfd_x86_elf_link_setup_gnu_properties): Set
plt_indirect_branch_offset.
* elfxx-x86.h (elf_x86_plt_layout): Add plt_indirect_branch_offset.
binutils/
* readelf.c (get_x86_64_dynamic_type): New function.
(get_dynamic_type): Call get_x86_64_dynamic_type.
include/
* elf/x86-64.h (DT_X86_64_PLT): New.
(DT_X86_64_PLTSZ): Likewise.
(DT_X86_64_PLTENT): Likewise.
ld/
* ld.texi: Document -z mark-plt and -z nomark-plt.
* emulparams/elf32_x86_64.sh: Source x86-64-plt.sh.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/x86-64-plt.sh: New file.
* testsuite/ld-x86-64/mark-plt-1.s: Likewise.
* testsuite/ld-x86-64/mark-plt-1a-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1a.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1b-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1b.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1c-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1c.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run -z mark-plt tests.
Add new ARCv3 CPUs and required bits to decode/encode ARCv3 ISA
opcodes. Fix 32 bit relocations which were set as signed but should be
bitfield: ARC_32_ME, ARC_GLOB_DAT, ARC_JMP_SLOT, ARC_RELATIVE. Remove
non-ABI relocation ARC_32_ME_S.
include/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
Cupertino Miranda <cupertinomiranda@gmail.com>
Bruno Mauricio <brunoasmauricio@gmail.com>
* include/elf/arc-cpu.def: Add new HS5x and HS6x CPUs.
* include/elf/arc-reloc.def: Add new ARC64 relocations.
* include/elf/arc.h (EF_ARC_CPU_ARC64): New define.
* include/opcode/arc-attrs.h (FEATURE_LIST_NAME): Update predicate.
* include/opcode/arc-func.h: Update formating.
(replace_disp8ls): New function.
(replace_disp9s): Likewise.
(replace_disp6s): Likewise.
(replace_disp7s): Likewise.
(replace_disp12s): Likewise.
* include/opcode/arc.h (ARC_OPCODE_ARC64): New define.
(ARC_OPCODE_ARC32): Likewise.
(ARC_OPERAND_FP): Likewise.
(HARD_FIELDF): Likewise.
(ARC_OPCODE_ARCVx): New macro.
(arc_flag_class): Update structure to hold new extract/insert
functions for flags.
(INSN3OP): Update macro.
(FP_SIZE, TPOF, DPOF, SOPF, COPF, CONVOPS): New enums.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
The Scalable Matrix Extension v2 (SME2) defines a new register, ZT0, that
the Linux Kernel handles through a new NT_ARM_ZT register set.
Teach binutils/BFD about it so that gdb can make use of it for reading
and writing core files. This also enables readelf/objdump to show the
correct identification for the NT_ARM_ZT register set.
Validated under Fast Models.
This patch adds support for EF_BPF_CPUVER bits in the ELF
machine-dependent header flags. These bits encode the BPF CPU
version for which the object file has been compiled for.
The BPF assembler is updated so it annotates the object files it
generates with these bits.
The BPF disassembler is updated so it honors EF_BPF_CPUVER to use the
appropriate ISA version if the user didn't specify an explicit ISA
version in the command line. Note that a value of zero in
EF_BPF_CPUVER is interpreted by the disassembler as "use the later
supported version" (the BPF CPU versions start with v1.)
The readelf utility is updated to pretty print EF_BPF_CPUVER when it
prints out the ELF header:
$ readelf -h a.out
ELF Header:
...
Flags: 0x4, CPU Version: 4
Tested in bpf-unknown-none.
include/ChangeLog:
2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf/bpf.h (EF_BPF_CPUVER): Define.
* opcode/bpf.h (BPF_XBPF): Change from 0xf to 0xff so it fits in
EF_BPF_CPUVER.
binutils/ChangeLog:
2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* readelf.c (get_machine_flags): Recognize and pretty print BPF
machine flags.
opcodes/ChangeLog:
2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-dis.c: Initialize asm_bpf_version to -1.
(print_insn_bpf): Set BPF ISA version from the cpu version ELF
header flags if no explicit version set in the command line.
* disassemble.c (disassemble_init_for_target): Remove unused code.
gas/ChangeLog:
2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.h (elf_tc_final_processing): Define.
* config/tc-bpf.c (bpf_elf_final_processing): New function.
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
The Allegrex CPU was created by Sony Interactive Entertainment to power
their portable console, the PlayStation Portable.
The pspdev organization maintains all sorts of tools to create software
for said device including documentation.
Signed-off-by: David Guillen Fandos <david@davidgf.net>
Revert value of DT_ENCODING to as it was before commit a7fd118627, and
adjust readelf.
include/
* elf/common.h (DT_ENCODING): Set back to 32.
binutils/
* readelf.c (struct filedata): Don't size dynamic_info array
using DT_ENCODING.
96d6e190e9
There are some known limitations for now,
* Do not shrink the length of the uleb128 value, even if the value is reduced
after relaxations. Also reports error if the length grows up.
* The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the
R_RISCV_SUB_ULEB128.
bfd/
* bfd-in2.h: Regenerated.
* elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the
uleb128 value, and report error if the length grows up. Called the
generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128,
to encode the uleb128 into the section contents.
(riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128
must be paired with and be placed before the R_RISCV_SUB_ULEB128.
* elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128.
(riscv_reloc_map): Likewise.
(riscv_elf_ignore_reloc): New function.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128):
New relocations to support .uleb128 subtraction.
gas/
* config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128
and BFD_RELOC_RISCV_SUB_ULEB128.
(s_riscv_leb128): Updated to allow uleb128 subtraction.
(riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction
expressions and insert fixups for them.
(riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections.
include/
* elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction.
binutils/
* testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128.
QNX provides some .note subsections. QNT_STACK is the one controling
the stack allocation.
bfd/ChangeLog:
* elf.c (BFD_QNT_CORE_INFO): Delete.
(BFD_QNT_CORE_STATUS): Likewise.
(BFD_QNT_CORE_GREG): Likewise.
(BFD_QNT_CORE_FPREG): Likewise.
(elfcore_grok_nto_note): Replace BFD_QNT_* by QNT_*.
binutils/ChangeLog:
* readelf.c (get_qnx_elfcore_note_type): New function.
(print_qnx_note): New function.
(process_note): Add support for QNX support.
include/ChangeLog:
* elf/common.h (QNT_DEBUG_FULLPATH): New define.
(QNT_DEBUG_RELOC): New define.
(QNT_STACK): New define.
(QNT_GENERATOR): New define.
(QNT_DEFAULT_LIB): New define.
(QNT_CORE_SYSINFO): New define.
(QNT_CORE_INFO): New define.
(QNT_CORE_STATUS): New define.
(QNT_CORE_GREG): New define.
(QNT_CORE_FPREG): New define.
(QNT_LINK_MAP): New define.
SFrame format is meant for generating stack traces only.
bfd/
* elf-bfd.h: Replace the use of "unwind" with "stack trace".
* elf-sframe.c: Likewise.
* elf64-x86-64.c: Likewise.
* elfxx-x86.c: Likewise.
include/
* elf/common.h: Likewise.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
The linker merges all the input .sframe sections. When merging, the
linker verifies that all the input .sframe sections have the same
abi/arch.
The linker uses libsframe library to perform key actions on the
.sframe sections - decode, read, and create output data. This
implies buildsystem changes to make and install libsframe before
libbfd.
The linker places the output .sframe section in a new segment of its
own: PT_GNU_SFRAME. A new segment is not added, however, if the
generated .sframe section is empty.
When a section is discarded from the final link, the corresponding
entries in the .sframe section for those functions are also deleted.
The linker sorts the SFrame FDEs on start address by default and sets
the SFRAME_F_FDE_SORTED flag in the .sframe section.
This patch also adds support for generation of SFrame unwind
information for the .plt* sections on x86_64. SFrame unwind info is
generated for IBT enabled PLT, lazy/non-lazy PLT.
The existing linker option --no-ld-generated-unwind-info has been
adapted to include the control of whether .sframe unwind information
will be generated for the linker generated sections like PLT.
Changes to the linker script have been made as necessary.
ChangeLog:
* Makefile.def: Add install dependency on libsframe for libbfd.
* Makefile.in: Regenerated.
* bfd/Makefile.am: Add elf-sframe.c
* bfd/Makefile.in: Regenerated.
* bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
* bfd/configure: Regenerate.
* bfd/configure.ac: Add elf-sframe.lo.
* bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
(struct sframe_dec_info): Likewise.
(struct sframe_enc_info): Likewise.
(struct elf_link_hash_table): New member for encoded .sframe
object.
(struct output_elf_obj_tdata): New member.
(elf_sframe): New access macro.
(_bfd_elf_set_section_sframe): New declaration.
* bfd/elf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
(bfd_section_from_phdr): Likewise.
(get_program_header_size): Likewise.
(_bfd_elf_map_sections_to_segments): Likewise.
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
contents to the .sframe sections or .plt* entries.
* bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
SEC_INFO_TYPE_SFRAME.
(_bfd_elf_default_action_discarded): Handle .sframe section.
(elf_link_input_bfd): Merge .sframe section.
(bfd_elf_final_link): Write the output .sframe section.
(bfd_elf_discard_info): Handle discarding .sframe section.
* bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
.sframe section for .plt and .plt.sec.
(_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
.plt* sections.
* bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
definition.
(SFRAME_PLT0_MAX_NUM_FRES): Likewise.
(SFRAME_PLTN_MAX_NUM_FRES): Likewise.
(struct elf_x86_sframe_plt): New structure.
(struct elf_x86_link_hash_table): New member.
(struct elf_x86_init_table): New members for .sframe
creation.
* bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
* binutils/readelf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
* ld/ld.texi: Update documentation for
--no-ld-generated-unwind-info.
* ld/scripttempl/elf.sc: Support .sframe sections.
* ld/Makefile.am (TESTSFRAMELIB): Use it.
(check-DEJAGNU): Likewise.
* ld/Makefile.in: Regenerated.
* ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
* ld/configure: Regenerated.
* bfd/elf-sframe.c: New file.
include/ChangeLog:
* elf/common.h (PT_GNU_SFRAME): New definition.
* elf/internal.h (struct elf_segment_map): Handle new segment
type PT_GNU_SFRAME.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
sframe-simple-1.
* ld/testsuite/ld-aarch64/sframe-bar.s: New file.
* ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
* ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-sframe/sframe-empty.d: New test.
* ld/testsuite/ld-sframe/sframe-empty.s: New file.
* ld/testsuite/ld-sframe/sframe.exp: New testsuite.
* ld/testsuite/ld-x86-64/sframe-bar.s: New file.
* ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
sframe-simple-1, sframe-plt-1.
* ld/testsuite/lib/ld-lib.exp: Add new proc to check if
assembler supports SFrame section.
* ld/testsuite/ld-sframe/discard.d: New file.
* ld/testsuite/ld-sframe/discard.ld: Likewise.
* ld/testsuite/ld-sframe/discard.s: Likewise.
FreeBSD's kernel has recently added two new ELF auxiliary vector
entries to describe the location of the user stack for the initial
thread in a process.
This change displays the proper name and description of these entries
in 'info auxv'.
This patch support ZTSO extension. It will turn on the tso flag for elf_flags
once we have enabled Ztso extension. This is intended to implement v0.1 of
the proposed specification which can be found in Chapter 25 of,
https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf.
bfd\ChangeLog:
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Set TSO flag.
* elfxx-riscv.c: Add Ztso's arch.
binutils\ChangeLog:
* readelf.c (get_machine_flags): Set TSO flag.
gas\ChangeLog:
* config/tc-riscv.c (riscv_set_tso): Ditto.
(riscv_set_arch): Ditto.
* testsuite/gas/riscv/ztso.d: New test.
include\ChangeLog:
* elf/riscv.h (EF_RISCV_TSO): Ditto.
