1. Compute the desired PT_GNU_RELRO segment base and find the maximum
section alignment of sections starting from the PT_GNU_RELRO segment.
2. Find the first preceding load section.
3. Don't add the 1-page gap between the first preceding load section and
the relro segment if the maximum page size >= the maximum section
alignment. Align the PT_GNU_RELRO segment first. Subtract the maximum
page size if therer is still a 1-page gap.
PR ld/28743
PR ld/28819
* ldlang.c (lang_size_relro_segment_1): Rewrite.
* testsuite/ld-x86-64/pr28743-1.d: New file.
* testsuite/ld-x86-64/pr28743-1.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr28743-1.
When running the testsuite, I have lines similar to the following in the
gdb.sum file:
~~~
PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: first backtrace: p /x 0x7f283d2f0fd1
...
PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: binprelink=NO: binsepdebug=NO: binpie=NO: INNER: first backtrace: p /x 0x7f00de0317a5
...
~~~
The address part of the command might change between execution of the
test, which adds noise to a diff between two .sum files.
This patch changes to test name to "p /x $pc" in order to have constant
test name.
Tested on x86_64-Linux.
Change-Id: I973c1237a084dd6d424276443cbf0920533c9a21
linux-thread-db.c has a bit of unusual code that unconditionally
prints a message, but decides whether to print to gdb_stdout or
gdb_stdlog based on a debug flag. It seems better to me to simply
always print this; and this is the only spot in gdb where we
conditionally pass gdb_stdout to one of the f*_unfiltered functions.
In an earlier version of the pager rewrite series, it was important to
audit unfiltered output calls to see which were truly necessary.
This is no longer necessary, but it still seems like a decent cleanup
to change calls to avoid explicitly passing gdb_stdout. That is,
rather than using something like fprintf_unfiltered with gdb_stdout,
the code ought to use plain printf_unfiltered instead.
This patch makes this change. I went ahead and converted all the
_filtered calls I could find, as well, for the same clarity.
This changes the time / space / symtab per-command statistics code to
send its output to gdb_stdlog rather than gdb_stdout. This seems
slightly more correct to me.
The gold subdir doesn't actually have a manual, so this hack doesn't
do anything. Plus the automake cygnus option was removed years ago
by Simon in d0ac1c44885daf68f631befa37e ("Bump to autoconf 2.69 and
automake 1.15.1"). So delete it here.
This was needed when gas was using the automake cygnus option, but
this was removed years ago by Simon in d0ac1c44885daf68f631befa37e
("Bump to autoconf 2.69 and automake 1.15.1"). So delete it here.
The info pages are already & still installed by default w/out it.
The description of the Window.click method doesn't mention where the
coordinates are anchored (it's the top left corner).
This minor tweak just mentions this point.
A few Rust operations do a bit of work in their 'evaluate' functions
and then call another function -- but are also the only caller. This
patch simplifies this code by removing the extra layer.
Tested on x86-64 Fedora 34. I'm checking this in.
Rename bfdlib_LTLIBRARIES and bfdinclude_HEADERS to lib_LTLIBRARIES and
include_HEADERS to fix the missing installed library and header files in
bfd caused by
commit bd32be01c997f686ab0b53f0640eaa0aeb61fbd3
Author: Mike Frysinger <vapier@gentoo.org>
Date: Fri Dec 3 00:23:20 2021 -0500
bfd: merge doc subdir up a level
PR binutils/28807
* Makefile.am (bfdlib_LTLIBRARIES): Renamed to ...
(lib_LTLIBRARIES): This.
(bfdinclude_HEADERS): Renamed to ...
(include_HEADERS): This.
* Makefile.in: Regenerate.
* doc/local.mk (install): Removed.
This is a generated file name from a correspondingly named C file.
Rename it to avoid unique build rules since there's no difference
to the generated manual.
PR 28793:
The alignment may be removed in linker. We need to create new frag after
alignment to prevent the assembler from computing static offsets.
gas/
* config/tc-riscv.c (riscv_frag_align_code): Create new frag.
Fixes:
CXX ser-mingw.o
/home/simark/src/binutils-gdb/gdb/ser-mingw.c: In function ‘int pipe_windows_open(serial*, const char*)’:
/home/simark/src/binutils-gdb/gdb/ser-mingw.c:870:3: error: ‘gdb_argv’ was not declared in this scope
870 | gdb_argv argv (name);
| ^~~~~~~~
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28802
Change-Id: I7f3e8ec5f9ca8582d587545fdf6b69901259f199
I noticed two places in the docs where we appear to be missing @r.
makeinfo seems to do the correct things despite these being
missing (at least, I couldn't see any difference in the pdf or info
output), but it doesn't hurt to have the @r in place.
We found a case where --gc-sections can cause gdb to set an invalid
breakpoint. In the included test case, gdb will set a breakpoint with
two locations, one of which is 0x0.
The code in lnp_state_machine::check_line_address is intended to
filter out this sort of problem, but in this case, the entire CU is
empty, causing unrelocated_lowpc==0x0 -- which circumvents the check.
It seems to me that if a CU is empty like this, then it is ok to
simply ignore the line table, as there won't be any locations anyway.
Add `set print array-indexes' handling for Fortran arrays. Currently
the setting is ignored and indices are never shown.
Keep track of the most recent index handled so that any outstanding
repeated elements printed when the limit set by `set print elements' is
hit have the correct index shown.
Output now looks like:
(gdb) set print array-indexes on
(gdb) print array_1d
$1 = ((-2) = 1, (-1) = 1, (0) = 1, (1) = 1, (2) = 1)
(gdb) set print repeats 4
(gdb) set print elements 12
(gdb) print array_2d
$2 = ((-2) = ((-2) = 2, <repeats 5 times>) (-1) = ((-2) = 2, <repeats 5 times>) (0) = ((-2) = 2, (-1) = 2, ...) ...)
(gdb)
for a 5-element vector and a 5 by 5 array filled with the value of 2.
Add `set print repeats' tests for C/C++ arrays, complementing one for
Fortran arrays and covering the different interpretation of the `set
print elements' setting in particular where the per-dimension count of
the elements handled is matched against the trigger rather than the
total element count as with Fortran arrays.
Implement `set print repeats' handling for Fortran arrays. Currently
the setting is ignored and always treated as if no limit was set.
Unlike the generic array walker implemented decades ago the Fortran one
is a proper C++ class. Rather than trying to mimic the old walker then,
which turned out a bit of a challenge where interacting with the `set
print elements' setting, write it entirely from scratch, by adding an
extra specialization handler method for processing dimensions other than
the innermost one and letting the specialization class call the `walk_1'
method from the handler as it sees fit. This way repeats can be tracked
and the next inner dimension recursed into as a need arises only, or
unconditionally in the base class.
Keep track of the dimension number being handled in the class rather as
a parameter to the walker so that it does not have to be passed across
by the specialization class.
Use per-dimension element count tracking, needed to terminate processing
early when the limit set by `set print elements' is hit. This requires
extra care too where the limit triggers exactly where another element
that is a subarray begins. In that case rather than recursing we need
to terminate processing or lone `(...)' would be printed. Additionally
if the skipped element is the last one in the current dimension we need
to print `...' by hand, because `continue_walking' won't print it at the
upper level, because it can see the last element has already been taken
care of.
Preserve the existing semantics of `set print elements' where the total
count of the elements handled is matched against the trigger level which
is unlike with the C/C++ array printer where the per-dimension element
count is used instead.
Output now looks like:
(gdb) set print repeats 4
(gdb) print array_2d
$1 = ((2, <repeats 5 times>) <repeats 5 times>)
(gdb) set print elements 12
(gdb) print array_2d
$2 = ((2, <repeats 5 times>) (2, <repeats 5 times>) (2, 2, ...) ...)
(gdb)
for a 5 by 5 array filled with the value of 2.
Amend existing test cases accordingly that rely on the current incorrect
behavior and explicitly request that there be no limit for printing
repeated elements there.
Add suitable test cases as well covering sliced arrays in particular.
Co-Authored-By: Andrew Burgess <andrew.burgess@embecosm.com>
More fun with R_PPC64_NONE found in .opd. Fixed by the
allocate_dynrelocs and ppc64_elf_size_dynamic_sections changes, and
since we are doing ifunc, opd and SYMBOL_REFERENCES_LOCAL tests later,
don't duplicate that work in check_relocs.
* elf64-ppc.c (ppc64_elf_check_relocs): Remove opd and ifunc
conditions for rel_count.
(dec_dynrel_count): Likewise.
(allocate_dynrelocs): Test for opd and ifunc when allocating
relative relocs.
(ppc64_elf_size_dynamic_sections): Likewise.
Similarly to the local GOT case.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
space for PLT relocs against local syms when enable_dt_relr.
Fixes another case where we end up with superfluous R_PPC64_NONE.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
space for GOT relocs against non-TLS local syms when enable_dt_relr.
(ppc64_elf_layout_multitoc): Likewise.
