This kills off another compile-time option by moving the setting to
the individual arch runtimes. This will allow dynamic selection by
the arch when doing a single build with multiple arches.
The sim_model_init rework is a little funky. In the past it was
disabled entirely if no default model was set. We maintain the
spirit of the logic by gating the fallback logic on whether the
port has defined any models.
We want to do a single build with all arches in one binary which means
we need to namespace sim_machs on a per-arch basis. Move it from a
global variable to the sim description structure so it can be setup at
runtime.
Changing the SIM_MODEL->num from an enum to an int is unfortunate, but
we specifically don't want to maintain a centralized list anymore, and
this was never used directly in common code, just passed to per-arch
callbacks.
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
This function has done only one thing: post-process command line
settings to see if profiling or tracing has been enabled, and if
so, set the run_fast_p flag in the simulator state. That flag is
only used in one place: to select the fast or slow cgen engine.
By inlining the run_fast_p logic to the one place it's used, we
can delete a good amount of logic specific to cgen ports: both
the call to cgen_init and the conditional simulator state. This
in turn allows us to have a single simulator state struct across
all ports so we can share objects more between them, and makes
the sim_open calls look more consistent.
The cleanup to use BFD_VMA_FMT also adjusted this line, but used the
incorrect format: while BFD_VMA_FMT needs an explicit "x", PRIx32 does
not, so the spurious "x" here confused the parser and broke execution.
The defs.h header will take care of including the various config.h
headers. For now, it's just config.h, but we'll add more when we
integrate gnulib in.
This header should be used instead of config.h, and should be the
first include in every .c file. We won't rely on the old behavior
where we expected files to include the port's sim-main.h which then
includes the common sim-basics.h which then includes config.h. We
have a ton of code that includes things before sim-main.h, and it
sometimes needs to be that way. Creating a dedicated header avoids
the ordering mess and implicit inclusion that shows up otherwise.
A lot of this code predates the bfd_vma format define, so we have a
random mix of casts to known types so we can printf the value. Use
the BFD_VMA_FMT that now exists to simplify and reliability output
across different build configs.
Since we require C11 now, we can assume many headers exist, and
clean up all of the conditional includes. It's not like any of
this code actually accounted for the headers not existing, just
whether we could include them.
The strings.h cleanup is a little nuanced: it isn't in C11, but
every use of it in the codebase will include strings.h only if
string.h doesn't exist. Since we now assume the C11 string.h
exists, we'll never include strings.h, so we can delete it.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Fix a long standing todo where we let getopt write directly to stderr
when an invalid option is passed. Use the sim io funcs instead as they
go through the filtered callbacks that gdb wants.
The global current_state handle to the current simulator state is a
design idea that was half implemented, but never really cleaned up.
The point was to have a global variable pointing to the state so that
funcs could more quickly & easily access the state anywhere. We've
instead moved in the direction of passing state around everywhere and
don't have any intention of moving back.
I also can't find any references to gdb using this variable, or to
cgen related "dump_regs" functions, both of which were used in the
comments related to this code.
Pretty much all targets are using this module already, so add it to the
common list of objects. The only oddball out here is cris and that's
because it supports loading via an offset for all the phdrs. We drop
support for that.
The point of passing down the cpu to core reads/writes is to signal which
cpu is making the access. For system accesses (such as internal memory
initialization), passing the cpu down doesn't make sense, and in the case
of early init like cris, can cause crashes. Since the cpu isn't fully set
up at this point, if the core code tries to access some fields (like the
PC reg), it'll crash. While cris shouldn't be doing this setup here (it
should be in the inferior stage), we'll deal with that later.
For targets that process argv in sim_create_inferior, improve the code:
- provide more details in the comment
- make the check for when to re-init more robust
- clean out legacy sim_copy_argv code
This will be cleaned up more in the future when we have a common inferior
creation function, but at least help new ports get it right until then.
The cris port was using the device framework to handle two addresses when
the --cris-900000xx flag was specified. That can be implemented using the
newer hardware framework instead which allows us to drop the device logic
entirely, as well as delete the tconfig.h file. Basically we create a new
cris_900000xx device model and move the read logic out of devices.c and
into that. The rest of the devices logic was callback to the hardware
framework already.
We've moved custom option install for other targets to sim_open, so update
cris too. It's the last one using MODULE_LIST, so we can drop that from
the common code too.
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* wrapper.c: Include config.h before system header files.
* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.
* sim-if.c: Include config.h before system header files.
* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.
* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.
* interp.c: Include config.h before system header files.
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
(cris_start_address, cris_program_offset): New variables.
(OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
enums.
(cris_options): New options --cris-program-offset and
--cris-start-address.
(cris_option_handler): Handle new options.
(cris_program_offset_write, cris_set_section_offset_iterator)
(cris_offset_sections, cris_offset_sections): New functions.
(sim_load): Use cris_program_offset_write as function argument to
cris_load_elf_file, not sim_write.
(struct offsetinfo): New struct.
(cris_handle_interpreter): Fix typo in comment.
(sim_open): Call cris_offset_sections as soon as the bfd of the
infile is available. Gate bfd validity checks on abfd non-NULL.
(sim_create_inferior): Let cris_start_address when != -1 override
other start-address choices.
* cris/sim-if.c: Include elf-bfd.h.
(struct progbounds): New members end_loadmem, start_nonloadmem.
(xprintf, eprintf): New functions, copied from common/sim-load.c.
(cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
(get_progbounds_iterator): Renamed from get_progbounds. Make
static. Update head comment. Set new struct progbounds members.
(exec_load_addr, interp_load_addr, interp_start_addr): New static
variables.
(aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
(aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
functions.
(sim_open): New constant array auxv_entries. Rewrite AUX_ENT
handling to use auxv_entries. Improve error message and checking
for invalid programs. Use new variable abfd for the program
instead of for each access reaching into sd to get it.
(sim_create_inferior): If non-zero, use interp_start_addr instead
of the program start address.
(cris_disassemble_insn): Remove incorrect and unclear, supposedly
stale comment. Always specify little-endian.
(cris_unknown_syscall_action): Declare.
* cris/sim-if.c (cris_unknown_syscall_action): Define.
(cris_options): Add cris-unknown-syscall option.
(cris_option_handler): Correct comment about and error message for
invalid --cris-cycles argument. Handle --cris-unknown-syscall.
* cris/traps.c: Include stdarg.h
(cris_unknown_syscall): New function.
(cris_break_13_handler): Instead of sim_io_eprintf and
sim_engine_halt, call cris_unknown_syscall to handle more or less
unknown syscalls. Adjust code as necessary to handle return
value.
