772b5e9b59
* configure.in (i[34]86-*-linux*): Add; bfd_target = i386-linux.
...
* configure.in (*-*-linux*): Remove until linux port for a
non-i386/i486 system is actually available.
1993-05-02 18:43:09 +00:00
b2057735d8
* libhppa.h: #undef e_* symbols which come from <machine/som.h>
...
when compiling under HPUX.
1993-05-01 03:05:18 +00:00
d325e28cfd
* The following patches are from Jeffrey Law <law@cs.utah.edu>.
...
* hppa.c (hppa_core_file_p): Provide a temporary dummy routine
for HOST_HPPABSD.
* bfd/hosts/hppabsd.h: Fix declarations of malloc and free.
* bfd/libhppa.h: Include sysdep here. Conditionalize
includes based on HOST_HPPAHPUX or HOST_HPPABSD.
Provide definitions for MAXCOMLEN and _PA_RISC_ID suitable
for BSD.
1993-05-01 00:57:03 +00:00
89c88702c0
Don't include system a.out.h in elf32-hppa.c.
...
Apparently include/aout/*.h isn't needed either, so just omit it.
Should compile on Solaris now...
1993-04-30 21:49:02 +00:00
9e768fa213
* coffcode.h: use dummy_reloc16_extra_cases rather than casting abort.
1993-04-30 17:22:39 +00:00
19e0e2211c
Log for changes already checked in today.
...
(Yes, this changelog entry is well tested and reasonably localized. :-)
1993-04-29 22:05:53 +00:00
c268b400ad
keep hp300hpux and hppa-elf files
1993-04-29 16:10:34 +00:00
18f81c053a
hppaosf target support
1993-04-29 15:59:58 +00:00
8ddd7ab3a9
fixed up to use elf32-target.h
1993-04-29 15:48:49 +00:00
fb6e80d50b
hppa support, initial linker support
1993-04-29 15:48:35 +00:00
8568acaa92
new reloc enum types
1993-04-29 15:38:41 +00:00
db232882e0
copyright; gas changes
1993-04-29 15:36:54 +00:00
9773646c14
Fix an unclear sentence.
1993-04-29 05:49:07 +00:00
20a9ac229e
Clean up English and Texinfo usage.
1993-04-29 03:45:24 +00:00
bafe0602a0
checkpoint hp300hpux code from HP; needs cleanup before using
1993-04-28 22:56:31 +00:00
4c85cbfac5
checkpoint hppa-elf code from Utah (Sanitize out until it's cleaned up & working)
1993-04-28 22:55:25 +00:00
9eb73722ae
add new field for subformat (for hp300 work)
1993-04-28 22:52:50 +00:00
ae06054e4b
allow overrides of armap defaults
1993-04-28 22:49:48 +00:00
9faacb925f
Support for Hitachi SH
1993-04-27 01:17:32 +00:00
31568a6f41
* trad-core.c (trad_unix_core_file_p): Check the file size.
1993-04-26 21:03:35 +00:00
e5351028c7
* sco-core.c (sco_core_vec): Add initializers for new target
...
fields.
1993-04-26 18:27:40 +00:00
35d835c405
* coffcode.h [_LIT]: Recognize .lit section.
1993-04-25 04:45:31 +00:00
5f8f6d56f2
Support for the alpha
1993-04-24 02:10:09 +00:00
9a5e3a9ac5
* Merge in HPPA/BSD changes from Utah.
...
* hppa.c: Use this for both HPUX & BSD.
* targets.c: Enable hppa_vec for both HPUX & BSD.
* config/hppabsd.mt: TDEFINES => TDEFAULTS.
* hosts/hppabsd.h: #define HOST_HPPABSD.
1993-04-24 00:00:41 +00:00
5e6d9f49be
* libbfd.c: Whitespace changes around byteswap macros.
...
* libbfd-in.h: Whitespace changes around byteswap declarations.
1993-04-21 09:31:42 +00:00
d4152352a8
* aoutf1.h (sunos4_core_file_p): Don't default bfd_error to
...
system_error anymore. It confuses bfd_check_format().
1993-04-20 23:00:58 +00:00
8171711b53
* bfd.c: Add sgi_core_data to tdata union.
...
* coff-mips.c: Add Irix 4.x core file support.
* hosts/irix4.h: #define HOST_IRIX4.
1993-04-20 06:11:51 +00:00
0f213cc206
a.out string table reduction code, take two.
...
Also fixed a bug in reading symbol tables on some systems...
1993-04-20 02:00:01 +00:00
d9fc59c93f
* trad-core.c (trad_core_vec): Add 6 new initializers to match
...
new signed get/put fields. Minor reformatting to label
some fields.
1993-04-19 23:56:57 +00:00
3f06498af4
changes for SVR3.2
1993-04-19 18:34:55 +00:00
7e4db2548b
* libbfd.c: bfd_put*: Remove casts to bfd_vma.
1993-04-19 13:35:48 +00:00
250351fc75
* aoutf1.h (internal_sunos_core): Make c_stacktop a bfd_vma.
...
(swapcore_sparc): Make sp a bfd_vma.
1993-04-17 01:44:18 +00:00
14e3c2e47d
* libbfd.c: Add signed versions of bfd_{h_,}{get,put}_signed_<size>.
...
libbfd.c, libbfd-in.h: Add _do*signed*.
targets.c, all targets: Add bfd*signed*.
bfd-in.h: Add bfd_signed_vma. Add comments.
1993-04-17 00:39:36 +00:00
34b6a8c305
Thu Apr 15 09:09:18 1993 Jim Kingdon (kingdon@cygnus.com)
...
* bfd-in.h (bfd_error), bfd.c (bfd_errmsgs): Add file_truncated.
* format.c (bfd_check_error): Check error return from
_bfd_check_format routines.
Wed Apr 14 23:48:25 1993 Jim Kingdon (kingdon@cygnus.com )
* rs6000-core.c (rs6000coff_core_p): Improve error checking and
recognize .data section if present.
1993-04-15 19:29:51 +00:00
a99c3d7094
* aoutx.h (aout_*_adjust_sizes_and_vmas): Avoid `sanity'
...
check for the case where the user sets the address of the BSS
section (and the file header can't specify this). Let the user
set it wherever they want, regardless of what goes in the header.
Fixes #ld/1826 (the fix was never checked in by Steve or Ken).
1993-04-15 08:44:58 +00:00
b07d03ba16
Fix minor merge botch in prev change.
1993-04-15 08:19:43 +00:00
7185848601
* ieee.c (ieee_slurp_sections): Pass all ieee section names
...
straight through into BFD sections. Add comments.
1993-04-15 08:05:31 +00:00
b6090f4d65
Cleanup in preparation for better 64-bit host support.
...
* bfd-in.h (bfd_64_type): Remove.
* libbfd.c (_do_getb64, _do_putb64): Use bfd_vma, not bfd_64_type.
* bfd-in.h (bfd_size): Remove.
* bfd-in.h (bfd_offset): Remove, after fixing ld/ldlang.[ch].
* bfd-in.h (bfd_word): Remove.
* reloc.c (reloc_howto_type): Replace bfd_word with bfd_vma.
* bfd-in.h (rawdata_offset): Remove.
* reloc.c (arelent): Replace rawdata_offset with bfd_size_type.
(bfd_perform_relocation): Lint.
(enum bfd_reloc_status): Comment cleanup.
1993-04-15 04:53:14 +00:00
8f8fefccf5
* aout-adobe.c, cpu-h8300.c, mipsbsd.c, srec.c: lint -Wall.
1993-04-15 04:52:32 +00:00
79f1d6a385
kill it dead
1993-04-13 05:32:52 +00:00
d0b09ced76
Clean up old comments
1993-04-12 21:18:31 +00:00
36c0a1ec22
* config/sun3.h: String argument to fprintf is const.
1993-04-09 18:50:36 +00:00
032250cda4
* coff-mips.c: Renamed PAGE_SIZE to ROUND_SIZE, to avoid confusion
...
on systems which define PAGE_SIZE in <limits.h>.
1993-04-09 17:48:10 +00:00
98a445b0fa
* trad-core.c (trad_unix_core_file_failing_signal): Use new macro
...
TRAD_UNIX_CORE_FILE_FAILING_SIGNAL to allow host files to specify
the core file failing signal.
* hosts/decstation.h (TRAD_UNIX_CORE_FILE_FAILING_SIGNAL): Define
to supply the core file failing signal.
1993-04-08 17:30:28 +00:00
a6235cbbc2
* coff-mips.c (PAGESIZE): Correct value.
...
With the wrong PAGESIZE everything worked just fine, with one
exception: emacs couldn't dump itself.
1993-04-07 18:34:25 +00:00
46bc1bf6ba
These changes make shared library support work again on 386 COFF
...
systems.
* coffcode.h (styp_to_sec_flags): Set SEC_SHARED_LIBRARY for a
STYP_NOLOAD | STYP_BSS section. Don't set SEC_NEVER_LOAD for a
STYP_INFO section.
(coff_compute_section_file_positions): Force vma and lma of _LIB
section to be zero.
(coff_set_section_contents): Count number of entries in new lma
field, not in vma.
* coffgen.c (make_a_section_from_file): Force lineno_count of
SEC_SHARED_LIBRARY section to be zero, since it is non-zero on the
SCO 3.2v4 shared library.
* seclet.c (rel): Copy over any section with contents, not just
loadable sections.
* coff-mips.c (ecoff_make_empty_symbol): Zero out newly allocated
symbol.
1993-04-06 00:53:41 +00:00
3cb4caa6b5
This makes ld -r work for i386-coff targets.
...
* coff-i386.c (coff_i386_reloc): New function, to generate
relocateable output correctly.
(howto_table): Use coff_i386_reloc for all reloc types.
(CALC_ADDEND): Use a more efficient hack to get the correct addend
for a common symbol.
(i386comm_value): Removed; no longer needed.
1993-04-05 20:09:58 +00:00
77f31b05cc
*** empty log message ***
1993-04-04 22:12:22 +00:00
55c95b041a
* coffcode.h (coff_set_section_contents): Don't write out
...
> >> * coffcode.h (coff_set_section_contents): Don't write out sections without a filepos.
1993-04-04 22:12:06 +00:00
b580c2b543
* seclet.c (seclet_dump_seclet): Correct SEC_HAS_CONTENTS test.
1993-04-02 22:36:04 +00:00
