The particular choices of address indexing, along with their encoding
for RCPC3 instructions lead to the requirement of a new set of operand
descriptions, along with the relevant inserter/extractor set.
That is, for the integer load/stores, there is only a single valid
indexing offset quantity and offset mode is allowed - The value is
always equivalent to the amount of data read/stored by the
operation and the offset is post-indexed for Load-Acquire RCpc, and
pre-indexed with writeback for Store-Release insns.
This indexing quantity/mode pair is selected by the setting of a
single bit in the instruction. To represent these insns, we add the
following operand types:
- AARCH64_OPND_RCPC3_ADDR_OPT_POSTIND
- AARCH64_OPND_RCPC3_ADDR_OPT_PREIND_WB
In the case of loads and stores involving SIMD/FP registers, the
optional offset is encoded as an 8-bit signed immediate, but neither
post-indexing or pre-indexing with writeback is available. This
created the need for an operand type similar to
AARCH64_OPND_ADDR_OFFSET, with the difference that FLD_index should
not be checked.
We thus introduce the AARCH64_OPND_RCPC3_ADDR_OFFSET operand, a
variant of AARCH64_OPND_ADDR_OFFSET, w/o the FLD_index bitfield.
Beyond the need to encode any registers involved in data transfer and
the address base register for load/stores, it is necessary to specify
the data register addressing mode and whether the address register is
to be pre/post-indexed, whereby loads may be post-indexed and stores
pre-indexed with write-back.
The use of a single bit to specify both the indexing mode and indexing
value requires a novel function be written to accommodate this for
address operand insertion in assembly and another for extraction in
disassembly, along with the definition of two insn fields for use with
these instructions.
This therefore defines the following functions:
- aarch64_ins_rcpc3_addr_opt_offset
- aarch64_ins_rcpc3_addr_offset
- aarch64_ext_rcpc3_addr_opt_offset
- aarch64_ext_rcpc3_addr_offset
It extends the `do_special_{encoding|decoding}' functions and defines
two rcpc3 instruction fields:
- FLD_opc2
- FLD_rcpc3_size
The allowed immediate offsets in integer rcpc3 load store instructions
are not encoded explicitly in the instruction itself, being rather
implicitly equivalent to the amount of data loaded/stored by the
instruction.
This leads to the requirement that this quantity be calculated based on
the number of registers involved in the transfer, either as data
source or destination registers and their respective qualifiers.
This is done via `calc_ldst_datasize (const aarch64_opnd_info *opnds)'
implemented here, using a cumulative sum of qualifier sizes preceding
the address operand in the OPNDS operand list argument.
Indicating the presence of the Armv8.2-a feature adding further
support for the Release Consistency Model, the `+rcpc3' architectural
extension flag is added to the list of possible `-march' options in
Binutils, together with the necessary macro for encoding rcpc3
instructions.
Hi,
This patch add support for SVE2.1 instructions ld1q,
ld2q, ld3q and ld4q, st1q, st2q, st3q and st4q.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for SVE2.1 instruction dupq, eorqv and extq.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SVE2p1 (SVE2.1 Extension) feature
along with +sve2p1 optional flag to enabe this feature.
Also support for following SVE2p1 instructions is added
addqv, andqv, smaxqv, sminqv, umaxqv, uminqv and uminqv.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SME2p1 and "movaz" instructions
along with the optional flag +sme2p1.
Following "movaz" instructions are add:
Move and zero two ZA tile slices to vector registers.
Move and zero four ZA tile slices to vector registers.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for SVE2.1 and SME2.1 non-widening BFloat16
(FEAT_B16B16) instructions.
Following instructions predicated, unpredicated and indexed
variants are added in this patch.
bfadd, bfclamp, bfmax bfmaxnm, bfmin,bfminnm,
bfmla,bfmls,bfmul and bfsub.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Additionally, change FEAT_XS tlbi variants to be gated on "+xs" instead of
"+d128". This is an incremental improvement; there are still some FEAT_XS tlbi
variants that are gated incorrectly or missing entirely.
This patch adds support for the new AArch64 system registers that are part of the following extensions:
* FEAT_DEBUGv8p9
* FEAT_PMUv3p9
* FEAT_PMUv3_SS
* FEAT_PMUv3_ICNTR
* FEAT_SEBEP
This patch adds support for FEAT_THE doubleword and quadword instructions.
doubleword insturctions are enabled by "+the" flag whereas quadword
instructions are enabled on passing both "+the and +d128" flags.
Support for following sets of instructions is added in this patch.
Read check write compare and swap doubleword:
(rcwcas, rcwcasa, rcwcasal, rcwcasl)
Read check write compare and swap quadword:
(rcwcasp,rcwcaspa, rcwcaspal, rcwcaspl)
Read check write software compare and swap doubleword:
(rcwscas, rcwscasa, rcwscasal, rcwscasl)
Read check write software compare and swap quadword:
(rcwscasp, rcwscaspa, rcwscaspal, rcwscaspl)
Read check write atomic bit clear on doubleword:
(rcwclr, rcwclra, rcwclral, rcwclrl)
Read check write atomic bit clear on quadword:
(rcwclrp, rcwclrpa, rcwclrpal, rcwclrpl)
Read check write software atomic bit clear on doubleword:
(rcwsclr, rcwsclra, rcwsclral, rcwsclrl)
Read check write software atomic bit clear on quadword:
(rcwsclrp,rcwsclrpa, rcwsclrpal,rcwsclrpl)
Read check write atomic bit set on doubleword:
(rcwset,rcwseta, rcwsetal,rcwsetl)
Read check write atomic bit set on quadword:
(rcwsetp,rcwsetpa,rcwsetpal,rcwsetpl)
Read check write software atomic bit set on doubleword:
(rcwsset,rcwsseta,rcwssetal,rcwssetl)
Read check write software atomic bit set on quadword:
(rcwssetp,rcwssetpa,rcwssetpal,rcwssetpl)
Read check write swap doubleword:
(rcwswp,rcwswpa,rcwswpal,rcwswpl)
Read check write swap quadword:
(rcwswpp,rcwswppa, rcwswppal,rcwswppl)
Read check write software swap doubleword:
(rcwsswp,rcwsswpa,rcwsswpal,rcwsswpl)
Read check write software swap quadword:
(rcwsswpp,rcwsswppa,rcwsswppal,rcwsswppl)
With the addition of 128-bit system registers to the Arm architecture
starting with Armv9.4-a, a mechanism for manipulating their contents
is introduced with the `msrr' and `mrrs' instruction pair.
These move values from one such 128-bit system register into a pair of
contiguous general-purpose registers and vice-versa, as for example:
msrr ttlb0_el1, x0, x1
mrrs x0, x1, ttlb0_el1
This patch adds the necessary support for these instructions, adding
checks for system-register width by defining a new operand type in the
form of `AARCH64_OPND_SYSREG128' and the `aarch64_sys_reg_128bit_p'
predicate, responsible for checking whether the requested system
register table entry is marked as implemented in the 128-bit mode via
the F_REG_128 flag.
The addition of 128-bit page table descriptors and, with it, the
addition of 128-bit system registers for these means that special
"invalidate translation table entry" instructions are needed to cope
with the new 128-bit model. This is introduced with the `tlbpi'
instruction, implemented here.
While CRn and CRm fields in the SYSP instruction are 4-bit wide and
are thus able to accommodate values in the range 0-15, the
specifications for the SYSP instructions limit their ranges to 8-9 for
CRm and 0-7 in the case of CRn.
This led to the need to signal in some way to the operand parser that
a given operand is under special restrictions regarding its use. This
is done via the new `F_OPD_NARROW' flag, indicating a narrowing in the
range of operand values for fields in the instruction tagged with the
flag.
The flag is then used in `parse_operands' when the instruction is
assembled, but needs not be taken into consideration during
disassembly.
Two of the instructions added by the `+d128' architectural extension
add the flexibility to have two optional operands. Prior to the
addition of the `tlbip' and `sysp' instructions, no mnemonic allowed
more than one such optional operand.
With `tlbip' as an example, some TLBIP instruction names do not allow
for any optional operands, while others allow for both to be optional.
In the latter case, it is possible that either the second operand
alone is omitted or both operands are omitted.
Therefore, a considerable degree of flexibility needed to be added to
the way operands were parsed. It was, however, possible to achieve
this with relatively few changes to existing code.
it is noteworthy that opcode flags specifying the optional operand
number are non-orthogonal. For example, we have:
#define F_OPD1_OPT (2 << 12) : 0b10 << 12
#define F_OPD2_OPT (3 << 12) : 0b11 << 12
such that by virtue of the observation that
(F_OPD1_OPT | F_OPD2_OPT) == F_OPD2_OPT
it is impossible to mark both operands 1 and 2 as optional for an
instruction and it is assumed that a maximum of 1 operand can ever be
optional. This is not overly-problematic given that, for optional
pairs, the second optional operand is always found immediately after
the first. Thus, it suffices for us to flag that there is a second
optional operand. With this fact, we can infer its position in the
mnemonic from the position of the first (e.g. if the second operand in
the mnemonic is optional, we know the third is too). We therefore
define the `F_OPD_PAIR_OPT' flag and calculate its position in the
mnemonic from the value encoded by the `F_OPD<n>_OPT' flag.
Another observation is that there is a tight coupling between default
values assigned to the two registers when one (or both) are omitted
from the mnemonic. Namely, if Xt1 has a value of 0x1f (the zero
register is specified), Xt2 defaults to the same value, otherwise Xt2
will be assigned Xt + 1. This meant that where you have default value
validation, in checking the second optional operand's value, it is
also necessary to look at the value assigned to the
previously-processed operand value before deciding its validity. Thus
`process_omitted_operand' needs not only access to its `operand'
argument, but also to the global `inst' struct.
Analysis of the allowed operand values for `sysp' and `tlbip' reveals
a significant departure from the allowed behavior for operand register
pairs (hitherto labeled AARCH64_OPND_PAIRREG) observed for other
insns in this category.
For instructions `casp', `mrrs' and `msrr' the register pair must
always start at an even index and the second register in the pair is
the index + 1. This precludes the use of xzr as the first register,
given it corresponds to register number 31.
This is different in the case of `sysp' and `tlbip', however. These
allow the use of xzr and, where the first operand in the pair is
omitted, this is the default value assigned to it. When this
operand is assigned xzr, it is expected that the second operand will
likewise take on a value of xzr.
These two instructions therefore "break" two rules of register pairs:
* The first of the two registers is odd-numbered.
* The index of the second register is equal to that of the first,
and not n+1.
To allow for this departure from hitherto standard behavior, we
extend the functionality of the assembler by defining an extension of
the AARCH64_OPND_PAIRREG, called AARCH64_OPND_PAIRREG_OR_XZR.
It is used in defining `sysp' and `tlbip' and allows
`operand_general_constraint_met_p' to allow the pair to both take on
the value of xzr.
Given the introduction of the new Armv9.4-a `sysp' insn using the
following syntax:
sysp #<op1>, <Cn>, <Cm>, #<op2>{, <Xt1>, <Xt2>}
and by extension the need to encode 6 assembly operands, extend
Binutils to handle instructions taking 6 operands, up from a previous
maximum of 5.
Indicating the presence of the Armv9.4-a features concerning 128-bit
Page Table Descriptors, 128-bit System Registers and Instructions,
the "+d128" architectural extension flag is added to the list of
possible -march options in Binutils, together with the necessary macro
for encoding d128 instructions.
This patch adds AArch32 support for -march=armv8.9-a and
-march=armv9.4-a. The behaviour of the new options can be
expressed using a combination of existing feature flags
and tables.
The cpu_arch_ver entries for ARM_ARCH_V9_4A and ARM_ARCH_V8_9A
are technically redundant but it including them for macro code
consistency across architectures.
Since the particularity of "th.vsetvli" was not taken into account in the
initial support patches for XTheadVector, the program operation failed
due to instruction coding errors. According to T-Head SPEC ([1]), the
"vsetvl" in the XTheadVector extension consists of SEW, LMUL and EDIV,
which is quite different from the "V" extension. Therefore, we cannot
simply reuse the processing of vsetvl in V extension.
We have set up tens of thousands of test cases to ensure that no
further encoding issues are there, and and execute all compiled test
files on real HW and make sure they don't trigger SIGILL.
Ref:
[1] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add handling for
th.vsetvli.
(my_getThVsetvliExpression): New function.
(riscv_ip): Likewise.
* testsuite/gas/riscv/x-thead-vector.d: Likewise.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv.h (OP_MASK_XTHEADVLMUL): New macro.
(OP_SH_XTHEADVLMUL): Likewise.
(OP_MASK_XTHEADVSEW): Likewise.
(OP_SH_XTHEADVSEW): Likewise.
(OP_MASK_XTHEADVEDIV): Likewise.
(OP_SH_XTHEADVEDIV): Likewise.
(OP_MASK_XTHEADVTYPE_RES): Likewise.
(OP_SH_XTHEADVTYPE_RES): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Likewise.
* riscv-opc.c: Likewise.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Print instruction description as comment in disassembly with s390
architecture specific option "insndesc":
- For objdump it can be enabled with option "-M insndesc"
- In gdb it can be enabled with "set disassembler-options insndesc"
Since comments are not column aligned the output can enhanced for
readability by postprocessing using a filter such as "expand":
... | expand -t 8,16,24,32,40,80
Or when using in combination with objdump option --visualize-jumps:
... | expand | sed -e 's/ *#/\t#/' | expand -t 1,80
Note that the instruction descriptions add about 128 KB to s390-opc.o:
s390-opc.o without instruction descriptions: 216368 bytes
s390-opc.o with instruction descriptions : 348432 bytes
binutils/
* NEWS: Mention new s390-specific disassembler option
"insndesc".
include/
* opcode/s390.h (struct s390_opcode): Add field to hold
instruction description.
opcodes/
* s390-mkopc.c: Copy instruction description from s390-opc.txt
into generated operation code table s390-opc.tab.
* s390-opc.c (s390_opformats): Provide NULL as description in
.insn pseudo-mnemonics opcode table.
* s390-dis.c: Add s390-specific disassembler option "insndesc"
and optionally print the instruction description as comment in
the disassembly when it is specified.
gas/
* testsuite/gas/s390/s390.exp: Add new test disassembly test
case "zarch-insndesc".
* testsuite/gas/s390/zarch-insndesc.s: New test case for s390-
specific disassembler option "insndesc".
* testsuite/gas/s390/zarch-insndesc.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
This patch add supports for FEAT_SPECRES2 "Enhanced speculation
restriction instructions" adding the "cosp" instruction.
This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is
enabled by the +predres2 march flag.
The description of instructions 'th.fmv.hw.x' and 'th.fmv.x.hw' of the
XTheadFmv extension in T-Head specific is incorrect, and it also has
some impact on the implementation of the binutils, so this patch
corrects this.
For details see:
https://github.com/T-head-Semi/thead-extension-spec/pull/34
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-fmv.d: Correct test.
* testsuite/gas/riscv/x-thead-fmv.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_FMV_HW_X): Correct coding.
(MASK_TH_FMV_HW_X): Likewise.
(MATCH_TH_FMV_X_HW): Likewise.
(MASK_TH_FMV_X_HW): Likewise.
opcodes/ChangeLog:
* riscv-opc.c: Correct operands.
Add support for jump visualization for the s390 architecture in
disassembly:
objdump -d --visualize-jumps ...
Annotate the (conditional) jump and branch relative instructions with
information required for jump visualization:
- jump: Unconditional jump / branch relative.
- condjump: Conditional jump / branch relative.
- jumpsr: Jump / branch relative to subroutine.
Unconditional jump and branch relative instructions are annotated as
jump.
Conditional jump and branch relative instructions, jump / branch
relative on count/index, and compare and jump / branch relative
instructions are annotated as condjump.
Jump and save (jas, jasl) and branch relative and save (bras, brasl)
instructions are annotated as jumpsr (jump to subroutine).
Provide instruction information required for jump visualization during
disassembly.
The instruction type is provided after determining the opcode.
For non-code it is set to dis_noninsn. Otherwise it defaults to
dis_nonbranch. No annotation is done for data reference instructions
(i.e. instruction types dis_dref and dis_dref2). Note that the
instruction type needs to be provided before printing of the
instruction, as it is used in print_address_func() to translate the
argument value into an address if it is assumed to be a PC-relative
offset. Note that this is never the case on s390, as
print_address_func() is only called with addresses and never with
offsets.
The target of the (conditional) jump and branch relative instructions
is provided during print, when the PC relative operand is decoded.
include/
* opcode/s390.h: Define opcode flags to annotate instruction
class information for jump visualization:
S390_INSTR_FLAG_CLASS_BRANCH, S390_INSTR_FLAG_CLASS_RELATIVE,
S390_INSTR_FLAG_CLASS_CONDITIONAL, and
S390_INSTR_FLAG_CLASS_SUBROUTINE.
Define opcode flags mask S390_INSTR_FLAG_CLASS_MASK for above
instruction class information.
Define helpers for common instruction class flag combinations:
S390_INSTR_FLAGS_CLASS_JUMP, S390_INSTR_FLAGS_CLASS_CONDJUMP,
and S390_INSTR_FLAGS_CLASS_JUMPSR.
opcodes/
* s390-mkopc.c: Add opcode flags to annotate information
for jump visualization: jump, condjump, and jumpsr.
* s390-opc.txt: Annotate (conditional) jump and branch relative
instructions with information for jump visualization.
* s390-dis.c (print_insn_s390, s390_print_insn_with_opcode):
Provide instruction information for jump visualization.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
SiFive has define as set of flexible instruction for extending vector
coprocessor, it able to encoding opcode like .insn but with predefined
format.
List of instructions:
sf.vc.x
sf.vc.i
sf.vc.vv
sf.vc.xv
sf.vc.iv
sf.vc.fv
sf.vc.vvv
sf.vc.xvv
sf.vc.ivv
sf.vc.fvv
sf.vc.vvw
sf.vc.xvw
sf.vc.ivw
sf.vc.fvw
sf.vc.v.x
sf.vc.v.i
sf.vc.v.vv
sf.vc.v.xv
sf.vc.v.iv
sf.vc.v.fv
sf.vc.v.vvv
sf.vc.v.xvv
sf.vc.v.ivv
sf.vc.v.fvv
sf.vc.v.vvw
sf.vc.v.xvw
sf.vc.v.ivw
sf.vc.v.fvw
Spec of Xsfvcp
https://www.sifive.com/document-file/sifive-vector-coprocessor-interface-vcix-software
Co-authored-by: Hau Hsu <hau.hsu@sifive.com>
Co-authored-by: Kito Cheng <kito.cheng@sifive.com>
Back then when the support for the RISC-V vector crypto extensions
was merged, the specification was frozen, but not ratified.
A frozen specification is allowed to change within tight bounds
before ratification and this has happend with the vector crypto
extensions.
The following changes were applied:
* A new extension Zvkb was defined, which is a strict subset of Zvbb.
* Zvkn and Zvks include now Zvkb instead of Zvbb.
This patch implements these changes between the frozen and the
ratified specification.
Note, that this technically an incompatible change of Zvkn and Zvks,
but I am not aware of any project that depends on the currently
implemented behaviour of Zvkn and Zvks. So this patch should be fine.
Reported-By: Jerry Shih <jerry.shih@sifive.com>
Reported-By: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Fold M_{S,Z}EXTH, deriving signed-ness from the incoming mnemonic. Fold
riscv_ext()'s calls md_assemblef(), the first of which were entirely
identical, while the other pair differed in just a single character.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds permutation instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
permutation instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMVXS): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds mask instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
mask instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMPOPCM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds floating-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
floating-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VFSQRTV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds fixed-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
fixed-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAADDVV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds integer arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
integer arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VADCVVM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds the sub-extension "XTheadZvamo" for the
"XTheadVector" extension, and it provides AMO instructions
for T-Head VECTOR vendor extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add support
for "XTheadZvamo" extension.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-zvamo.d: New test.
* testsuite/gas/riscv/x-thead-vector-zvamo.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAMOADDWV): New.
* opcode/riscv.h (enum riscv_insn_class): Add insn class.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore it
makes sense to group them into smaller chunks in form of vendor
extensions.
This patch adds provides load/store segment instructions for T-Head VECTOR
vendor extension, which same as the "Zvlsseg" extension in RVI 0.71 vector
extension, but belongs to the "XTheadVector" extension. The 'th' prefix
and the "XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add test.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLSEG2BV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds load/store instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
load/store instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLBV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the CSRs for XTheadVector. Because of the
conflict between encoding and teh 'V' extension, it is implemented
by alias. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add the class for
the CSRs of the "XTheadVector" extension.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/x-thead-vector-csr-warn.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr-warn.l: New test.
* testsuite/gas/riscv/x-thead-vector-csr.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (DECLARE_CSR_ALIAS): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Prefix the CSRs disassembly with 'th'.
T-Head has a range of vendor-specific instructions ([2]).
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the "XTheadVector" extension, a collection of
T-Head-specific vector instructions. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the RISC-V
toolchain conventions ([1]).
Here are some things that need to be explained:
The "XTheadVector" extension is not a custom-extension, but
a non-standard non-conforming extension. The encoding space
of the "TheadVector" instructions overlaps with those of
the 'V' extension. This encoding space conflict is not on
purpose, but the result of issues in the past that have
been resolved since. Therefore, the "XTheadVector" extension
and the 'V' extension are in conflict.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
[2] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): The
"XTheadVector" extension and the 'V' extension are in conflict.
(riscv_multi_subset_supports): Likewise..
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-fail.d: New test.
* testsuite/gas/riscv/x-thead-vector-fail.l: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class):
This patch adds the permission model enhancement and memory
attribute index enhancement features and their corresponding
system registers in AArch64 assembler.
Permission Indirection Extension (FEAT_S1PIE, FEAT_S2PIE)
Permission Overlay Extension (FEAT_S1POE, FEAT_S2POE)
Memory Attribute Index Enhancement (FEAT_AIE)
Extension to Translation Control Registers (FEAT_TCR2)
These features are available by default from Armv9.4-A architecture.
