When running test-case gdb.linespec/explicit.exp with GLIBC debuginfo
installed, I run into:
...
(gdb) break -source exp^GlFAIL: gdb.linespec/explicit.exp: complete \
non-unique file name (timeout)
...
The regexp that times out is:
...
-re "break -source exp\\\x07licit" {
...
and the reason it times out is that gdb only outputs an "l" after the tab, while
the regexp expect a futher "icit".
This is a regression since commit 507dd60e28 "[gdb/testsuite, 1/2] Fix
gdb.linespec/explicit.exp with check-read1", where I merged the matching for
the two cases where GLIBC debuginfo is either installed or not, as it turns
out incorrectly, presumably because even though I tested with GLIBC debuginfo
info installed and deinstalled, that didn't make a difference because I didn't
use configure flag --with-separate-debug-dir=/usr/lib/debug.
Fix this by not explictly matching the "icit" part.
Tested on x86_64-linux, with and without GLIBC debuginfo installed, both with
make targets check and check-read1.
gdb/testsuite/ChangeLog:
2020-03-12 Tom de Vries <tdevries@suse.de>
* gdb.linespec/explicit.exp: Fix "complete non-unique file name" test
in presence of GLIBC debuginfo.
In commit 1281424ccf "[gdb/testsuite] Fix core file load FAIL in
tls-core.exp", I've made this change:
...
- -re ": No such file or directory.*\r\n$gdb_prompt $" {
+ -re "$core: No such file or directory.*\r\n$gdb_prompt $" {
...
However, the $core variable contains a filename which needs to be matched
as a literal string, not as a regexp.
Fix this by using string_to_regexp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-12 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_core_cmd): Use string_to_regexp for regexp-matching
$core.
After deinstalling package glibc-debugsource, I run into the following FAIL
with test-case gdb.threads/tls-core.exp:
...
(gdb) core gdb/testsuite/outputs/gdb.threads/tls-core/tls-core.core^M
[New LWP 30081]^M
[New LWP 30080]^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib64/libthread_db.so.1".^M
Core was generated by `gdb/testsuite/outputs/gdb.threads/tls-core/tls-c'.^M
Program terminated with signal SIGABRT, Aborted.^M
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.^M
[Current thread is 1 (Thread 0x7fb568d4b700 (LWP 30081))]^M
(gdb) FAIL: gdb.threads/tls-core.exp: native: load core file (file not found)
...
The problem is that this gdb_test_multiple clause in gdb_core_cmd:
...
-re ": No such file or directory.*\r\n$gdb_prompt $" {
fail "$test (file not found)"
return -1
}
...
triggers on the message about raise.c, while it is intended to catch:
...
$ gdb
(gdb) core bla
/home/vries/bla: No such file or directory.
...
Fix this by making the regexp more precise:
...
- -re ": No such file or directory.*\r\n$gdb_prompt $" {
+ -re "$core: No such file or directory.*\r\n$gdb_prompt $" {
...
Tested on x86_64-linux.
Also tested the test-case with this patch in place to verify that the regexp
still triggers:
...
- set core_loaded [gdb_core_cmd $corefile $test]
+ set core_loaded [gdb_core_cmd $corefile/bla $test]
...
gdb/testsuite/ChangeLog:
2020-03-12 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_core_cmd): Make "No such file or directory" regexp
more precise.
* readelf.c (process_section_headers): Don't just set
filedata->section_headers NULL, free it first. Similarly for
dynamic_symbols, dynamic_strings, dynamic_syminfo and
symtab_shndx_list. Zero associated counts too.
(process_object): Free symtab_shndx_list.
(process_file): Free various allocated filedata tables.
A patch somewhat like this patch has been in Fedora GDB for well over
a decade. The Fedora patch was written by Jan Kratochvil. The Fedora
version prints a warning and attempts to continue. This version will
error out, fatally. An earlier version of this patch was more like
the Fedora version than this one. Simon Marchi recommended use of an
assertion to test for the infinite recursion; I decided to use an
explicit test (with an "if" statement) along with a call to
internal_error() if the condition is met. This way, I could include
a plea to file a bug report.
It was motivated by a customer reported bug (back in 2006!) which
showed infinite mutual recursion between find_pc_sect_line and
find_pc_line. Here is a portion of the backtrace from the bug report:
(gdb) bt
#0 0x00000000004450a4 in lookup_minimal_symbol_by_pc_section (
pc=251700325328, section=0x570f500) at gdb/minsyms.c:484
#1 0x00000000004bbfb2 in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2057
#2 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#3 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
... (lots and lots of the same two functions with the same parameters)
#1070 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1071 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
#1072 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1073 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
#1074 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1075 0x00000000004bc1ff in find_pc_sect_line (pc=251696794399,
section=0x59b0df8, notcurrent=0) at gdb/symtab.c:2081
#1076 0x00000000004bc480 in find_pc_line (pc=251696794399, notcurrent=0)
at gdb/symtab.c:2232
#1077 0x000000000055550e in find_frame_sal (frame=0xb3f3e0, sal=0x7fff1d1a8200)
at gdb/frame.c:1392
#1078 0x00000000004d86fd in set_current_sal_from_frame (frame=0x1648, center=1)
at gdb/stack.c:379
#1079 0x00000000004cf137 in normal_stop () at gdb/infrun.c:3147
...
The test case was a large application. Attempts were made to make a
small(er) test case, but those attempts were not successful.
Therefore, I cannot provide a new test for this patch.
That said, we ought to guard against recursively calling
find_pc_sect_line (via find_pc_line) with the identical PC value that
it had been called with. Should this happen, infinite recursion (as
shown in the above backtrace) is the result. This patch prevents
that from happening.
If this should happens, there is a bug somewhere, perhaps in GDB, perhaps
in some other part of the toolchain or a library. We error out fatally
with a message briefly describing the condition along with a plea to file
a bug report.
I spent some time looking at the surrounding code and commentary which
handle the case of PC being in a stub/trampoline. It first appeared
in the public GDB repository in April, 1999. The ChangeLog entry for
this commit is from 1998-12-31. The relevant portion is:
(find_pc_sect_line): Return correct information if pc is in import
or export stub (trampoline).
What's remarkable about the overall ChangeLog entry is that it's over
2500+ lines long! I believe that this was part of the infamous "HP
merge" (in which insufficient due diligence was given in accepting
a large batch of changes from an outside source). In the years that
followed, much of this code was either significantly revised or
outright removed.
For this particular case, I'm grateful that extensive comments were
provided by "RT". (I haven't been able to figure out who RT is/was.)
I've decided against attempting to revise this stub/trampoline handling
code any further than adding Jan's test which prevents an obvious case
of infinite recursion.
I've tested on Fedora 31, x86-64. I see no regressions. I've also
searched the logfile for the new message, but as expected, no message
was found (which is good).
gdb/ChangeLog:
* symtab.c (find_pc_sect_line): Add check which prevents infinite
recursion.
Change-Id: I595470be6ab5f61ca7e4e9e70c61a252c0deaeaa
When on a MinGW host, standard_output_file uses a regular expression to
convert Unix-style paths of the form "/c/foo" to "c:/foo". This is
needed because the paths we pass to GDB (for example, with the "file"
command) need to be in the Windows form.
However, the regexp only works if your binutils-gdb repo is under a
`/[a-z]/...` path (the Unix paths mapping to Windows drives).
Presumably, that works if you clone the repo in Windows, then access it
through `/c/...`.
In my case, I've cloned the repository directly inside my MinGW shell,
so in /home/smarchi. The regexp therefore doesn't work for me. The
path doesn't get transformed, and the file command fails when running
any test:
(gdb) file /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.arch/i386-bp_permanent/i386-bp_permanent
/home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.arch/i386-bp_permanent/i386-bp_permanent: No such file or directory.
A safer way to do this is to execute `pwd -W` while in the directory we
want the path for, this is what this patch does.
I have also considered using the using the cygpath utility to do the
conversion. It can be used to convert any MinGW path into its Windows
equivalent. Despite originally coming from Cygwin, the cygpath utility
is distributed by MinGW-w64 and can be used in that environment.
However, it's not distributed with the non-MinGW-w64 MinGW.
The `pwd -W` trick only works with directories that exist, which is the
case here, so it's sufficient.
With this, the file command in the test succeeds:
(gdb) file C:/msys64/home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.arch/i386-bp_permanent/i386-bp_permanent
Reading symbols from C:/msys64/home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.arch/i386-bp_permanent/i386-bp_permanent...
gdb/testsuite/ChangeLog:
* lib/gdb.exp (standard_output_file): Use `pwd -W` to convert
from Unix to Windows path.
While compiling with clang, I noticed it didn't catch cases where my
function declaration didn't match my function definition. This is
normally caught by gcc with -Wmissing-declarations.
On clang, this is caught by -Wmissing-prototypes instead.
Note that on gcc, -Wmissing-prototypes also exists, but is only valid
for C and Objective-C. It gets correctly rejected by the configure
script since gcc rejects it with:
cc1plus: error: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ -Werror
So this warning flag ends up not used for gcc (which is what we want).
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
* warning.m4: Enable -Wmissing-prototypes.
When building gdb using configure flag
--with-separate-debug-dir=/usr/lib/debug, and running test-case
gdb.ada/minsyms.exp, I run into:
...
(gdb) PASS: gdb.ada/minsyms.exp: print some_minsym
print integer(some_minsym)^M
A syntax error in expression, near `some_minsym)'.^M
(gdb) FAIL: gdb.ada/minsyms.exp: print integer(some_minsym)
...
and 2 other FAILs.
This is due to the fact that the language after arriving at the ada main
function turns out to be auto/c. [ This has been filed as PR25655 -
"Language is not auto/ada in main ada function for exec without debug info". ]
When building gdb without the configure flag mentioned above, we have instead
auto/ada in the ada main function, and all tests pass.
Fix the FAILs by working around PR25655 in the test-case, and manually setting
the language to ada.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.ada/minsyms.exp: Set language to ada.
When running gdb.server/sysroot.exp, I run into this FAIL:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, __printf (format=0x4005c4 "Hello World!\n") at printf.c:28^M
28 {^M
(gdb) FAIL: gdb.server/sysroot.exp: sysroot=local: continue to printf
...
for this test:
...
gdb_test "continue" "Breakpoint $decimal.* printf .*" "continue to printf"
...
Without debug info for glibc installed, we have instead:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x00007ffff773c550 in printf () from /lib64/libc.so.6^M
(gdb) PASS: gdb.server/sysroot.exp: sysroot=local: continue to printf
...
Fix this by allowing for GLIBC's printf alias __printf to be printed:
...
gdb_test "continue" "Breakpoint $decimal.* (__)?printf .*" \
"continue to printf"
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.server/sysroot.exp: Allow GLIBC's printf alias __printf.
Add 3 command-line options to generate lfence for load, indirect near
branch and ret to help mitigate:
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00334.htmlhttp://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-0551
1. -mlfence-after-load=[no|yes]:
-mlfence-after-load=yes generates lfence after load instructions.
2. -mlfence-before-indirect-branch=[none|all|memory|register]:
a. -mlfence-before-indirect-branch=all generates lfence before indirect
near branches via register and a warning before indirect near branches
via memory.
b. -mlfence-before-indirect-branch=memory issue a warning before
indirect near branches via memory.
c. -mlfence-before-indirect-branch=register generates lfence before
indirect near branches via register.
Note that lfence won't be generated before indirect near branches via
register with -mlfence-after-load=yes since lfence will be generated
after loading branch target register.
3. -mlfence-before-ret=[none|or|not]
a. -mlfence-before-ret=or generates or with lfence before ret.
b. -mlfence-before-ret=not generates not with lfence before ret.
A warning will be issued and lfence won't be generated before indirect
near branch and ret if the previous item is a prefix or a constant
directive, which may be used to hardcode an instruction, since there
is no clear instruction boundary.
* config/tc-i386.c (lfence_after_load): New.
(lfence_before_indirect_branch_kind): New.
(lfence_before_indirect_branch): New.
(lfence_before_ret_kind): New.
(lfence_before_ret): New.
(last_insn): New.
(load_insn_p): New.
(insert_lfence_after): New.
(insert_lfence_before): New.
(md_assemble): Call insert_lfence_before and insert_lfence_after.
Set last_insn.
(OPTION_MLFENCE_AFTER_LOAD): New.
(OPTION_MLFENCE_BEFORE_INDIRECT_BRANCH): New.
(OPTION_MLFENCE_BEFORE_RET): New.
(md_longopts): Add -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(md_parse_option): Handle -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(md_show_usage): Display -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
* doc/c-i386.texi: Document -mlfence-after-load=,
-mlfence-before-indirect-branch= and -mlfence-before-ret=.
When running gdb.btrace/reconnect.exp, I run into the follow FAIL:
...
(gdb) stepi 19^M
0x00007ffff7dd8b67 59 return (ElfW(Addr)) &_DYNAMIC - \
elf_machine_dynamic ();^M
(gdb) FAIL: gdb.btrace/reconnect.exp: first: stepi 19
...
The corresponding test looks like:
...
gdb_test "stepi 19" "0x.* in .* from .*"
...
which matches the usual:
...
(gdb) stepi 19^M
0x00007ffff7dd8b67 in _dl_start () from target:/lib64/ld-linux-x86-64.so.2^M
(gdb) PASS: gdb.btrace/reconnect.exp: first: stepi 19
...
which I also get when removing configure flag
--with-separate-debug-dir=/usr/lib/debug.
Fix this by allowing the source line pattern in the test regexp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.btrace/reconnect.exp: Allow source line pattern after stepi.
A comment in ada-typeprint.c mentions the Unchecked_Variant pragma.
However, this does not exist, and the comment should actually mention
Unchecked_Union.
gdb/ChangeLog
2020-03-11 Tom Tromey <tromey@adacore.com>
* ada-typeprint.c (print_choices): Fix comment.
While working on a variant part patch, I notcied that
gdb.dwarf2/variant.exp does not mark the discriminant members as
DW_AT_artificial. However, it should, as this is what the real Rust
compiler does, and how the Rust language support is supposed to work.
gdb/testsuite/ChangeLog
2020-03-11 Tom Tromey <tromey@adacore.com>
* gdb.dwarf2/variant.exp: Mark discriminants as artificial.
When running test-case gdb.base/foll-fork.exp, I see:
...
(gdb) catch fork^M
Catchpoint 2 (fork)^M
Reading in symbols for ../sysdeps/x86/libc-start.c...^M
(gdb) FAIL: gdb.base/foll-fork.exp: explicit child follow, set catch fork
...
The problem is that the test regexp does not expect the "Reading in symbols"
message:
...
gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" \
"explicit child follow, set catch fork"
...
which is generated due to the verbose setting.
Fix this by allowing the message in the regexp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.base/foll-fork.exp: Allow "Reading in symbols" messages.
I'm running into the following failure (and 17 more like it) in
gdb.base/break-interp.exp:
...
(gdb) bt^M
#0 0x00007fde85a3b0c1 in __GI___nanosleep \
(requested_time=requested_time@entry=0x7ffe5044ee70, \
remaining=remaining@entry=0x7ffe5044ee70) at nanosleep.c:27^M
#1 0x00007fde85a3affa in __sleep (seconds=0) at sleep.c:55^M
#2 0x00007fde8606789c in libfunc (Reading in symbols for libc-start.c...^M
action=0x7ffe5044fa12 "sleep") at gdb.base/break-interp-lib.c:41^M
#3 0x0000000000400708 in main ()^M
Reading in symbols for ../sysdeps/x86_64/start.S...^M
(gdb) FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: \
BINprelinkNOdebugNOpieNO: INNER: attach: attach main bt
...
The problem is that the test uses verbose mode to detect the "PIE (Position
Independent Executable) displacement" messages, but the verbose mode also
triggers "Reading in symbols for" messages, which may appear in the middle of
a backtrace (or not, depending on whether debug info is available).
[ In fact, the messages appear in the middle of a backtrace line, which is
PR25613. ]
Fix these FAILs by limiting the scope of verbose to the parts of the test that
need it.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.base/break-interp.exp: Limit verbose scope.
With test-case gdb.fortran/logical.exp, I run into:
...
(gdb) PASS: gdb.fortran/logical.exp: var=l: get hexadecimal valueof "&l"
set *((uint8_t *) 0x7fffffffd2bc) = 0xff^M
No symbol "uint8_t" in current context.^M
(gdb) FAIL: gdb.fortran/logical.exp: var=l: byte 0: set contents of byte at offset 0
...
Fix this by using the fortran-native type character instead.
Tested on x86_64-linux, with gcc 7.5.0.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.fortran/logical.f90: Define variable with character type.
* gdb.fortran/logical.exp: Use character type instead of uint8_t.
This commit:
commit 8c95582da858ac981f689a6f599acacb8c5c490f
Date: Mon Dec 30 21:04:51 2019 +0000
gdb: Add support for tracking the DWARF line table is-stmt field
Introduced an invalid memory access, by reading outside the bounds of
an array.
This would cause this valgrind error:
==7633== Invalid read of size 4
==7633== at 0x4D002C: buildsym_compunit::record_line(subfile*, int, unsigned long, bool) (buildsym.c:688)
==7633== by 0x5F60A5: dwarf_record_line_1(gdbarch*, subfile*, unsigned int, unsigned long, bool, dwarf2_cu*) (read.c:19956)
==7633== by 0x5F63B0: lnp_state_machine::record_line(bool) (read.c:20024)
==7633== by 0x5F5DD5: lnp_state_machine::handle_special_opcode(unsigned char) (read.c:19851)
==7633== by 0x5F6706: dwarf_decode_lines_1(line_header*, dwarf2_cu*, int, unsigned long) (read.c:20135)
==7633== by 0x5F6C57: dwarf_decode_lines(line_header*, char const*, dwarf2_cu*, dwarf2_psymtab*, unsigned long, int) (read.c:20328)
==7633== by 0x5DF5F1: handle_DW_AT_stmt_list(die_info*, dwarf2_cu*, char const*, unsigned long) (read.c:10748)
==7633== by 0x5DF823: read_file_scope(die_info*, dwarf2_cu*) (read.c:10796)
==7633== by 0x5DDA63: process_die(die_info*, dwarf2_cu*) (read.c:9815)
==7633== by 0x5DD44A: process_full_comp_unit(dwarf2_per_cu_data*, language) (read.c:9580)
==7633== by 0x5DAB58: process_queue(dwarf2_per_objfile*) (read.c:8867)
==7633== by 0x5CB30E: dw2_do_instantiate_symtab(dwarf2_per_cu_data*, bool) (read.c:2374)
==7633== Address 0xa467f48 is 8 bytes before a block of size 16,024 alloc'd
==7633== at 0x4C2CDCB: malloc (vg_replace_malloc.c:299)
==7633== by 0x451FC4: xmalloc (alloc.c:60)
==7633== by 0x4CFFDF: buildsym_compunit::record_line(subfile*, int, unsigned long, bool) (buildsym.c:678)
==7633== by 0x5F60A5: dwarf_record_line_1(gdbarch*, subfile*, unsigned int, unsigned long, bool, dwarf2_cu*) (read.c:19956)
==7633== by 0x5F63B0: lnp_state_machine::record_line(bool) (read.c:20024)
==7633== by 0x5F5DD5: lnp_state_machine::handle_special_opcode(unsigned char) (read.c:19851)
==7633== by 0x5F6706: dwarf_decode_lines_1(line_header*, dwarf2_cu*, int, unsigned long) (read.c:20135)
==7633== by 0x5F6C57: dwarf_decode_lines(line_header*, char const*, dwarf2_cu*, dwarf2_psymtab*, unsigned long, int) (read.c:20328)
==7633== by 0x5DF5F1: handle_DW_AT_stmt_list(die_info*, dwarf2_cu*, char const*, unsigned long) (read.c:10748)
==7633== by 0x5DF823: read_file_scope(die_info*, dwarf2_cu*) (read.c:10796)
==7633== by 0x5DDA63: process_die(die_info*, dwarf2_cu*) (read.c:9815)
==7633== by 0x5DD44A: process_full_comp_unit(dwarf2_per_cu_data*, language) (read.c:9580)
gdb/ChangeLog:
* buildsyms.c (buildsym_compunit::record_line): Avoid accessing
previous item in the list, when the list has no items.
PR 25611
PR 25614
* dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
li_segment_size fields.
* dwarf.c (read_debug_line_header): Record the address size and
segment selector size values (if present) in the lineinfo
structure.
(display_formatted_table): Warn if the format count is empty but
the table itself is not empty.
Display the format count and entry count at the start of the table
dump.
(display_debug_lines_raw): Display the address size and segement
selector size fields, if present.
* testsuite/binutils-all/dw5.W: Update expected output.
gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
(DWARF2_FILE_SIZE_NAME): Default to -1.
(DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
whichever is higher.
(DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
(NUM_MD5_BYTES): Define.
(struct file entry): Add md5 field.
(get_filenum): Delete and replace with...
(get_basename): New function.
(get_directory_table_entry): New function.
(allocate_filenum): New function.
(allocate_filename_to_slot): New function.
(dwarf2_where): Use new functions.
(dwarf2_directive_filename): Add support for extended .file
pseudo-op.
(dwarf2_directive_loc): Allow the use of file number zero with
DWARF 5 or higher.
(out_file_list): Rename to...
(out_dir_and_file_list): Add DWARF 5 support.
(out_debug_line): Emit extra values into the section header for
DWARF 5.
(out_debug_str): Allow for file 0 to be used with DWARF 5.
* doc/as.texi (.file): Update the description of this pseudo-op.
* testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
* testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
* testsuite/gas/lns/lns-diag-1.l: Update expected error message.
* NEWS: Mention the new feature.
The test-case gdb.base/list-ambiguous.exp normally passes, but with target
board readnow, some tests fail.
In particular, for this test, edit doesn't fail as expected:
...
# While at it, test the "edit" command as well, since it shares
# code with "list".
gdb_test "edit $symbol" \
"Specified line is ambiguous:\r\n${h0_re}\r\n${h1_re}"
...
and the editor is launched, in my case:
...
$ echo $EDITOR
/home/vries/bin/emacs-nw.sh
...
which result in all subsequent tests failing with timeout, and an editor
backup file in my sources:
...
$ git status --ignored
On branch master
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
gdb/testsuite/gdb.base/#list-ambiguous0.c#
nothing to commit, working tree clean
...
Fix this by setting EDITOR to true before starting gdb in this test-case.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.base/list-ambiguous.exp: Set EDITOR to true.
This is similar to cbbbc402e059ee345cb781d3ceb757ae1cc679ee and fixes
a link error with duplicately defined symbols on FreeBSD.
libctf/ChangeLog:
* swap.h (bswap_identity_64): Make static.
If this code dealing with possible conversion of inline plt sequences
is ever executed, ld will hang. A binary with such sequences and of
code size larger than approximately 90% the reach of an unconditional
branch is the trigger. Oops.
* elf64-ppc.c (ppc64_elf_inline_plt): Do increment rel in for loop.
With the right set of options, the second block of code dealing with
padding can see a different section count. So don't use the new count.
Since I was editing those lines, I've also changed the code allocating
arrays a little.
array = malloc (n * sizeof (*array));
for an array of ints is just better than
array = malloc (n * sizeof (int));
It's easier to write correctly in the first place and more robust
against code changes that might modify the array element type.
PR 25651
* objcopy.c (copy_object): Test "gaps" not gap_fill_set or
pad_to_set on second block of code dealing with padding.
Replace "c" with "num_sec" and don't recalculate number of
sections on second block. Size arrays using sizeof (element)
rather than sizeof (element type).
Not just SHF_EXCLUDE but any of these flags ought to prevent merging
of sections for ld -r.
* ldelf.c (elf_orphan_compatible): Return false when two sections
have differing SHF_MASKPROC or SHF_MASKOS flags.
When using the executable from test-case gdb.ada/access_to_packed_array.exp
(read-in using -readnow) and printing the symbols using "maint print symbols",
we run into a segv:
...
$ gdb -readnow -batch access_to_packed_array/foo -ex "maint print symbols"
...
info: array (<>) of character; computed at runtime
ptr: range 0 .. 2147483647; computed at runtime
Aborted (core dumped)
...
What happens is that dwarf2_evaluate_property gets called and sets the local
frame variable to the current frame, which happens to be NULL. Subsequently
the PROP_LOCLIST handling code is executed, where get_frame_address_in_block
gets called with argument NULL, and the segv is triggered.
Fix this by handling a NULL frame in the PROP_LOCLIST handling code in
dwarf2_evaluate_property.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* dwarf2/loc.c (dwarf2_evaluate_property): Handle NULL frame in
PROP_LOCLIST handling code.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.ada/access_to_packed_array.exp: Test printing of expanded
symtabs.
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
This commit adds the ability to set and toggle the DWARF line table
is-stmt flag.
A DWARF line table can now be created with the attribute
'default_is_stmt' like this:
lines {version 2 default_is_stmt 0} label {
...
}
If 'default_is_stmt' is not specified then the current default is 1,
which matches the existing behaviour.
Inside the DWARF line table program you can now make use of
{DW_LNS_negate_stmt} to toggle the is-stmt flag, for example this
meaningless program:
lines {version 2 default_is_stmt 0} label {
include_dir "some_directory"
file_name "some_filename" 1
program {
{DW_LNS_negate_stmt}
{DW_LNE_end_sequence}
}
}
This new functionality will be used in a later commit.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf::lines) Add support for modifying the
is-stmt flag in the line table.
Change-Id: Ia3f61d523826382dd2333f65b9aae368ad29c4a5
ubsan complains about memcpy with a NULL src even when size is zero.
* objdump.c (disassemble_section): Don't call qsort unless
sym count is at least two.
(disassemble_data): Don't call memcpy with NULL src.
ihex_set_section_contents sorts records stored on the tdata.ihex_data
list by address, but ihex_write_object_contents went too far in
assuming they were not overlapping. This patch fixes the problem by
not assuming anything about addresses in ihex_write_object_contents.
PR 25648
* ihex.c (ihex_write_object_contents): Don't assume ordering of
addresses here. Remove dead code.
Since i386-opc.tbl contains '\' to avoid very long lines and i386-gen
requires that each instruction must be in one line, also pass -P to
$(CPP) to inhibit generation of linemarkers in the output from the
preprocessor to support i386-gen.
* Makefile.am ($(srcdir)/i386-init.h): Also pass -P to $(CPP).
* Makefile.in: Regenerated.
When trying to run tests using target board cc-with-dwz after a clean build, I
run into:
...
ERROR: tcl error sourcing board description file for target cc-with-tweaks.exp.
couldn't open "build/gdb/testsuite/cache/gdb.sh.17028": \
no such file or directory
couldn't open "build/gdb/testsuite/cache/gdb.sh.17028": \
no such file or directory
while executing
"open $tmp_filename w"
(procedure "cached_file" line 9)
invoked from within
"cached_file gdb.sh "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS \"\$@\"" 1"
...
The problem is that cached_file is trying to create a file
build/gdb/testsuite/cache/gdb.sh.17028 in a non-existing directory.
Fix this by creating the cache dir in cached_file.
Tested on x86_64-linux, with target board cc-with-tweaks, and native.
gdb/testsuite/ChangeLog:
2020-03-09 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (cached_file): Create cache dir.
PR 25645
* readelf.c (dump_ia64_vms_dynamic_fixups): Pass size and nmemb
to get_data rather than multiplying.
(dump_ia64_vms_dynamic_relocs): Likewise.
(process_version_sections): Correct order of size and nmemb args
in get_data call.
(process_mips_specific): Likewise.
These all follow an almost common pattern, again with the exception of
being commutative, which can be easily taken care of.
Note that, as an intended side effect (and in fact one of the reason to
introduce templates), AVX long-form pseudo-ops get introduced alongside
the already existing AVX512 ones.
In order to reduce redundancy as well as the chance of things going out
of sync (see a later patch for an example), make the opcode table
generator capable of recognizing and expanding templated templates. Use
the new capability for compacting the general purpose conditional insns.
* wasm-module.c (wasm_scan): Sanity check file name length
before allocating memory. Move common section setup code. Do
without bfd_tell to calculate section size.
I noticed a couple of typos in gdb_binary_search.h. This fixes them.
gdbsupport/ChangeLog
2020-03-08 Tom Tromey <tom@tromey.com>
* gdb_binary_search.h: Fix two typos.
When running with target board unix/-feliminate-dwarf2-dups, we run into these
FAILs:
...
FAIL: gdb.cp/rvalue-ref-params.exp: print value of f1 on Child&& in f2
FAIL: gdb.cp/ref-params.exp: print value of f1 on Child in main
FAIL: gdb.cp/ref-params.exp: print value of f2 on Child in main
FAIL: gdb.cp/ref-params.exp: print value of f1 on Child& in f2
FAIL: gdb.cp/ref-params.exp: print mf1(MQ)
FAIL: gdb.cp/ref-params.exp: print mf2(MQ)
FAIL: gdb.cp/ref-params.exp: print f1(MQR)
FAIL: gdb.cp/ref-params.exp: print mf1(MQR)
FAIL: gdb.cp/ref-params.exp: print mf2(MQR)
...
This is due to comparing the result of build_executable to 1, while
build_executable returns either 0 for success, or -1 for failure.
Fix this by comparing with -1 instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-03-07 Tom de Vries <tdevries@suse.de>
* gdb.cp/ref-params.exp: Compare build_executable result with -1.
* gdb.cp/rvalue-ref-params.exp: Same.
Gcc supports an option -feliminate-dwarf2-dups (up until gcc-7, removed in
gcc-8).
When running tests with target board unix/-feliminate-dwarf2-dups, we run
into:
...
(gdb) PASS: gdb.ada/arraydim.exp: print m'length(3)
ptype global_3dim_for_gdb_testing^M
type = array (Unexpected type in ada_discrete_type_low_bound.^M
(gdb) FAIL: gdb.ada/arraydim.exp: ptype global_3dim_for_gdb_testing
...
The DWARF for the variable global_3dim_for_gdb_testing looks as follows:
...
<0><824>: Abbrev Number: 1 (DW_TAG_compile_unit)
<825> DW_AT_name : src/gdb/testsuite/gdb.ada/arraydim/inc.c
<1><832>: Abbrev Number: 2 (DW_TAG_array_type)
<833> DW_AT_type : <0x874>
<2><837>: Abbrev Number: 3 (DW_TAG_subrange_type)
<838> DW_AT_type : <0x84a>
<83c> DW_AT_upper_bound : 0
<2><83d>: Abbrev Number: 3 (DW_TAG_subrange_type)
<83e> DW_AT_type : <0x84a>
<842> DW_AT_upper_bound : 1
<2><843>: Abbrev Number: 3 (DW_TAG_subrange_type)
<844> DW_AT_type : <0x84a>
<848> DW_AT_upper_bound : 2
<2><849>: Abbrev Number: 0
<1><84a>: Abbrev Number: 4 (DW_TAG_typedef)
<84b> DW_AT_type : <0x86d>
<1><84f>: Abbrev Number: 0
<0><85b>: Abbrev Number: 5 (DW_TAG_compile_unit)
<861> DW_AT_name : src/gdb/testsuite/gdb.ada/arraydim/inc.c
<1><86d>: Abbrev Number: 6 (DW_TAG_base_type)
<86e> DW_AT_byte_size : 8
<86f> DW_AT_encoding : 7 (unsigned)
<870> DW_AT_name : long unsigned int
<1><874>: Abbrev Number: 7 (DW_TAG_base_type)
<875> DW_AT_byte_size : 4
<876> DW_AT_encoding : 5 (signed)
<877> DW_AT_name : int
<1><87b>: Abbrev Number: 8 (DW_TAG_variable)
<87c> DW_AT_name : global_3dim_for_gdb_testing
<882> DW_AT_type : <0x832>
<886> DW_AT_external : 1
...
The DWARF contains an anonymous typedef at 0x84a, referring to 0x86d.
Strictly speaking, the anonymous typedef is illegal DWARF, because a
DW_TAG_typedef is defined to have an DW_AT_name attribute containing the name
of the typedef as it appears in the source program.
The DWARF reading code creates a corresponding type for this typedef, which
goes on to confuse the code handling arrays.
Rather than trying to support the type representing this anonymous typedef in
all the locations where it causes problems, fix this by treating the anonymous
typedef as a forwarder DIE in the DWARF reader.
Tested on x86_64-linux, with target boards unix and
unix/-feliminate-dwarf2-dups.
This fixes ~85 failures for unix/-feliminate-dwarf2-dups.
gdb/ChangeLog:
2020-03-07 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (read_typedef): Treat anonymous typedef as forwarder
DIE.
While working on complex number support, I found a couple of
apparently obsolete coments. This removes them.
2020-03-07 Tom Tromey <tom@tromey.com>
* valops.c (value_literal_complex): Remove obsolete comment.
* gdbtypes.h (enum type_code) <TYPE_CODE_FLT>: Remove obsolete
comment.
Fixes a fail on hppa64-hp-hpux, where anything in the first column is
a label.
* testsuite/gas/elf/dwarf-5-file0.s: Don't start directives in
first column.
In commit 2b44a6a237 (" binutils: doc: make `make clean` clean more
things"), I moved the doc build artifacts to MOSTLYCLEANFILES, which
made them get removed by "make clean".
Because generating binutils.info requires makeinfo, and we do not want
to require makeinfo when building from the tarball, binutils.info should
not get removed by "make clean" (otherwise, it won't be included in the
tarball).
And to be consistent with other projects (e.g. ld and gas), we also want
to ship the built man pages in the tarball.
This patch puts back all these in MAINTAINERCLEANFILES, so that they are
bundled in the tarball, and only cleaned if you use "make
maintainer-clean".
Tested by building a source release and confirming they are present.
binutils/ChangeLog:
PR 25491
* doc/Makefile.am: Rename MOSTLYCLEANFILES to MAINTAINERCLEANFILES.
* doc/Makefile.in: Re-generate.
