* symfile.h (ADD_PSYMBOL_VT_TO_LIST),
symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
No longer demangle partial symbols.
* symtab.c (lookup_symbol, list_symbols): Handle mangled
variables, e.g. C++ static members, via the minimal symbols.
Handle reordered functions in an objfile, for Irix 5.2 shared
libraries.
* objfiles.h (OBJF_REORDERED): New bit in the objfile flags,
set if the functions in an objfile are reordered.
* mdebugread.c (parse_partial_symbols): Detect reordered
functions in an objfile.
* symtab.c (find_pc_psymtab, find_pc_symtab): Use expensive
lookup algorithm if the functions in the objfile are reordered.
* xcoffexec.c (exec_close): If the current target has a copy
of the exec_ops sections, reflect the freeing of the sections
in current_target.
* valops.c (call_function_by_hand): Use `sizeof dummy1', not
`sizeof dummy', for constructing the call dummy code.
* config/sparc/tm-sparc.h: Add PARAMS declarations to all
function declarations.
* sparc-tdep.c (sparc_pop_frame): Cast result of
read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
* irix5-nat.c (enable_break): Set breakpoint at the entry point
of the executable, to handle the case where main resides in a
shared library.
* irix5-nat.c (solib_create_inferior_hook): Reset stop_soon_quietly
after shared library symbol reading, to get rid of a warning from
heuristic_proc_start if the startup code has no symbolic debug info.
* breakpoint.h (struct breakpoint): Add new fields language
and input_radix, to enable breakpoint resetting with the
proper language and radix.
* breakpoint.c (set_raw_breakpoint): Initialize them.
(breakpoint_re_set_one): Use them when resetting the breakpoint.
(breakpoint_re_set): Preserve current language and input_radix
across breakpoint_re_set_one calls.
* symtab.c (decode_line_1): Do not build a canonical line
specification for `*expr' line specifications.
* breakpoint.h (bpstat_stop_status): Fix prototype declaration.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
both it and TC_M88K.
(coff_adjust_section_syms): New function.
(coff_frob_section): For non-empty sections, create aux entry for the section
symbol, indicating the size.
(n_line_nos): New variable.
(add_lineno): Increment it.
(coff_add_linesym): Increment n_line_nos, don't call add_lineno.
(coff_frob_file): New function; map coff_adjust_section_syms over sections.
(obj_coff_line): Only reset line_base for .bf symbols.
* config/obj-coff.h (coff_adjust_section_syms, coff_frob_file): Declare.
(obj_frob_file): New macro.
* config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Renamed from
obj_frob_forward_symbol, and rewritten for new parameter list.
(set_endian): Mention that ``auto'' is permitted.
(set_endian_auto): New static function.
(show_endian): Change message based on target_byte_order_auto.
(set_endian_from_file): New function.
(init_main): Add command ``auto'' to endianlist.
* exec.c (exec_file_command): Call set_endian_from_file.
* defs.h (set_endian_from_file): Declare.
define TARGET_BYTE_ORDER as target_byte_order, and declare
target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
a test of TARGET_BYTE_ORDER.
* top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
defined:
(endianlist, target_byte_order): New variables.
(set_endian, set_endian_big, set_endian_little): New functions.
(show_endian): New function.
(init_cmd_lists): Initialize endianlist.
(init_main): Add commands ``set endian big'', ``set endian
little'', and ``show endian''.
* a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
BITS_BIG_ENDIAN to switch at run time rather than at compile time.
* coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
* remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
* values.c: Likewise.
* mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
run time rather than at compile time.
defined, define as 0.
(FIX_CALL_DUMMY): Rewrite to remove presumption that host and
target are similar.
* config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
* config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
* config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
(BREAKPOINT): Remove definition.
* config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
(BREAKPOINT): Remove definition.
* config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
value of 1, rather than without a value.
* config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
use COFF_DEFAULT_SECTION_ALIGNMENT_POWER instead. Force the .stab
and .stabstr sections to be aligned to no more than 2. Remove
COFF_SPARC special cases.
* coff-a29k.c: Define COFF_DEFAULT_SECTION_ALIGNMENT_POWER.
* coff-apollo.c, coff-go32.c, coff-h8300.c: Likewise.
* coff-h8500.c, coff-i386.c, coff-i960.c, coff-m68k.c: Likewise.
* coff-m88k.c, coff-rs6000.c, coff-sh.c, coff-sparc.c: Likewise.
* coff-we32k.c, coff-z8k.c: Likewise.
PR 5706.
