mirror of
https://github.com/espressif/binutils-gdb.git
synced 2025-06-12 03:26:19 +08:00
77 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| 213516ef31 |
Update copyright year range in header of all files managed by GDB
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023. |
|||
| 64760036a8 |
[gdb/python] Fix gdb.python/py-finish-breakpoint2.exp for -m32
[ Partial resubmission of an earlier submission by Andrew ( https://sourceware.org/pipermail/gdb-patches/2012-September/096347.html ), so listing him as co-author. ] With x86_64-linux and target board unix/-m32, we have: ... (gdb) continue^M Continuing.^M Exception #10^M ^M Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M 23 throw new int (e);^M (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... The following scenario happens: - set breakpoint in throw_exception_1, a function that throws an exception - continue - hit breakpoint, with call stack main.c:38 -> throw_exception_1 - set a finish breakpoint - continue - hit the breakpoint again, with call stack main.c:48 -> throw_exception -> throw_exception_1 Due to the exception, the function call did not properly terminate, and the finish breakpoint didn't trigger. This is expected behaviour. However, the intention is that gdb detects this situation at the next stop and calls the out_of_scope callback, which would result here in this test-case in a rather confusing "exception did not finish" message. So the problem is that this message doesn't show up, in other words, the out_of_scope callback is not called. [ Note that the fact that the situation is detected only at the next stop (wherever that happens to be) could be improved upon, and the earlier submission did that by setting a longjmp breakpoint. But I'm considering this problem out-of-scope for this patch. ] Note that the message does show up later, at thread exit: ... [Inferior 1 (process 20046) exited with code 0236]^M exception did not finish ...^M ... The decision on whether to call the out_of_scope call back is taken in bpfinishpy_detect_out_scope_cb, and the interesting bit is here: ... if (b->pspace == current_inferior ()->pspace && (!target_has_registers () || frame_find_by_id (b->frame_id) == NULL)) bpfinishpy_out_of_scope (finish_bp); ... In the case of the thread exit, the callback triggers because target_has_registers () == 0. So why doesn't the callback trigger in the case of the breakpoint? Well, the b->frame_id is the frame_id of the frame of main (the frame in which the finish breakpoint is supposed to trigger), so AFAIU frame_find_by_id (b->frame_id) == NULL will only be true once we've left main, at which point I guess we don't stop till thread exit. Fix this by saving the frame in which the finish breakpoint was created, and using frame_find_by_id () == NULL on that frame instead, such that we have: ... (gdb) continue^M Continuing.^M Exception #10^M ^M Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M 23 throw new int (e);^M exception did not finish ...^M (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... Still, the test-case is failing because it's setup to match the behaviour that we get on x86_64-linux with target board unix/-m64: ... (gdb) continue^M Continuing.^M Exception #10^M stopped at ExceptionFinishBreakpoint^M (gdb) PASS: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... So what happens here? Again, due to the exception, the function call did not properly terminate, but the finish breakpoint still triggers. This is somewhat unexpected. This happens because it just so happens to be that the frame return address at which the breakpoint is set, is also the first instruction after the exception has been handled. This is a know problem, filed as PR29909, so KFAIL it, and modify the test-case to expect the out_of_scope callback. Also add a breakpoint after setting the finish breakpoint but before throwing the exception, to check that we don't call the out_of_scope callback too early. Tested on x86_64-linux, with target boards unix/-m32. Co-Authored-By: Andrew Burgess <aburgess@redhat.com> PR python/27247 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27247 |
|||
| d0d41b77c0 |
Replace gdbpy_should_stop with gdbpy_breakpoint_cond_says_stop
In 2014, the function `gdbpy_should_stop' has been replaced with `gdbpy_breakpoint_cond_says_stop' This replaces `gdbpy_should_stop' with `gdbpy_breakpoint_cond_says_stop' in the comments. Since `gdbpy_should_stop' has been renamed as noted in `gdb/ChangeLog-2014': * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. Change-Id: I0ef3491ce5e057c5e75ef8b569803b30a5838575 Approved-By: Simon Marchi <simon.marchi@efficios.com> |
|||
| 6533cbeeb8 |
Fix deletion of FinishBreakpoints
Currently, FinishBreakpoints are set at the return address of a frame based on the `finish' command, and are meant to be temporary breakpoints. However, they are not being cleaned up after use, as reported in PR python/18655. This was happening because the disposition of the breakpoint was not being set correctly. This commit fixes this issue by correctly setting the disposition in the post-stop hook of the breakpoint. It also adds a test to ensure this feature isn't regressed in the future. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18655 |
|||
| 8a3b17063e |
gdb/python: break more dependencies between gdbpy_initialize_* functions
In a later commit in this series I will propose removing all of the explicit gdbpy_initialize_* calls from python.c and replace these calls with a more generic mechanism. One of the side effects of this generic mechanism is that the order in which the various Python sub-systems within GDB are initialized is no longer guaranteed. On the whole I don't think this matters, most of the sub-systems are independent of each other, though testing did reveal a few places where we did have dependencies, though I don't think those dependencies were explicitly documented in comment anywhere. This commit is similar to the previous one, and fixes the second dependency issue that I found. In this case the finish_breakpoint_object_type uses the breakpoint_object_type as its tp_base, this means that breakpoint_object_type must have been initialized with a call to PyType_Ready before finish_breakpoint_object_type can be initialized. Previously we depended on the ordering of calls to gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in python.c. After this commit a new function gdbpy_breakpoint_init_breakpoint_type exists, this function ensures that breakpoint_object_type has been initialized, and can be called from any gdbpy_initialize_* function. I feel that this change makes the dependency explicit, which I think is a good thing. There should be no user visible changes after this commit. |
|||
| 04ea6b6314 |
Remove dead code from py-finishbreakpoint.c
PR python/16324 points out that comparing a frame id to null_frame_id can never succeed, and proposes simply removing the dead code. That is what this patch does. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16324 |
|||
| bd2b40ac12 |
Change GDB to use frame_info_ptr
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
|
|||
| a0cbd6505e |
Remove frame_id_eq
This replaces frame_id_eq with operator== and operator!=. I wrote this for a version of this series that I later abandoned; but since it simplifies the code, I left this patch in. Approved-by: Tom Tomey <tom@tromey.com> |
|||
| 27710edb4e |
gdb: remove TYPE_TARGET_TYPE
Remove the macro, replace all uses by calls to type::target_type. Change-Id: Ie51d3e1e22f94130176d6abd723255282bb6d1ed |
|||
| 264f98902f |
event_location -> location_spec
Currently, GDB internally uses the term "location" for both the
location specification the user input (linespec, explicit location, or
an address location), and for actual resolved locations, like the
breakpoint locations, or the result of decoding a location spec to
SaLs. This is expecially confusing in the breakpoints module, as
struct breakpoint has these two fields:
breakpoint::location;
breakpoint::loc;
"location" is the location spec, and "loc" is the resolved locations.
And then, we have a method called "locations()", which returns the
resolved locations as range...
The location spec type is presently called event_location:
/* Location we used to set the breakpoint. */
event_location_up location;
and it is described like this:
/* The base class for all an event locations used to set a stop event
in the inferior. */
struct event_location
{
and even that is incorrect... Location specs are used for finding
actual locations in the program in scenarios that have nothing to do
with stop events. E.g., "list" works with location specs.
To clean all this confusion up, this patch renames "event_location" to
"location_spec" throughout, and then all the variables that hold a
location spec, they are renamed to include "spec" in their name, like
e.g., "location" -> "locspec". Similarly, functions that work with
location specs, and currently have just "location" in their name are
renamed to include "spec" in their name too.
Change-Id: I5814124798aa2b2003e79496e78f95c74e5eddca
|
|||
| 74421c0bc8 |
Rename base_breakpoint -> code_breakpoint
Even after the previous patches reworking the inheritance of several
breakpoint types, the present breakpoint hierarchy looks a bit
surprising, as we have "breakpoint" as the superclass, and then
"base_breakpoint" inherits from "breakpoint". Like so, simplified:
breakpoint
base_breakpoint
ordinary_breakpoint
internal_breakpoint
momentary_breakpoint
ada_catchpoint
exception_catchpoint
tracepoint
watchpoint
catchpoint
exec_catchpoint
...
The surprising part to me is having "base_breakpoint" being a subclass
of "breakpoint". I'm just refering to naming here -- I mean, you'd
expect that it would be the top level baseclass that would be called
"base".
Just flipping the names of breakpoint and base_breakpoint around
wouldn't be super great for us, IMO, given we think of every type of
*point as a breakpoint at the user visible level. E.g., "info
breakpoints" shows watchpoints, tracepoints, etc. So it makes to call
the top level class breakpoint.
Instead, I propose renaming base_breakpoint to code_breakpoint. The
previous patches made sure that all code breakpoints inherit from
base_breakpoint, so it's fitting. Also, "code breakpoint" contrasts
nicely with a watchpoint also being typically known as a "data
breakpoint".
After this commit, the resulting hierarchy looks like:
breakpoint
code_breakpoint
ordinary_breakpoint
internal_breakpoint
momentary_breakpoint
ada_catchpoint
exception_catchpoint
tracepoint
watchpoint
catchpoint
exec_catchpoint
...
... which makes a lot more sense to me.
I've left this patch as last in the series in case people want to
bikeshed on the naming.
"code" has a nice property that it's exactly as many letters as
"base", so this patch didn't require any reindentation. :-)
Change-Id: Id8dc06683a69fad80d88e674f65e826d6a4e3f66
|
|||
| a0cd5f080b |
Remove vtable_breakpoint_ops
There's no need to have vtable_breakpoint_ops any more, so remove it in favor of base_breakpoint_ops. |
|||
| 7dd8e7ae28 |
Convert ordinary breakpoints to vtable ops
This converts "ordinary" breakpoint to use vtable_breakpoint_ops. Recall that an ordinary breakpoint is both the kind normally created by users, and also a base class used by other classes. |
|||
| e6b3636709 |
gdb: add a symbol* argument to get_return_value
Add an argument to the get_return_value function to indicate the symbol of the function the debuggee is returning from. This will be used by the following patch. Since the function return type can be deduced from the symbol remove the value_type argument which becomes redundant. No user visible change after this patch. Tested on x86_64-linux. Change-Id: Idf1279f1f7199f5022738a6679e0fa63fbd22edc Co-authored-by: Simon Marchi <simon.marchi@polymtl.ca> |
|||
| 5f9c5a63ce |
gdb: remove SYMBOL_TYPE macro
Add a getter and a setter for a symbol's type. Remove the corresponding macro and adjust all callers. Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de |
|||
| 1da5d0e664 |
Change how Python architecture and language are handled
Currently, gdb's Python layer captures the current architecture and
language when "entering" Python code. This has some undesirable
effects, and so this series changes how this is handled.
First, there is code like this:
gdbpy_enter enter_py (python_gdbarch, python_language);
This is incorrect, because both of these are NULL when not otherwise
assigned. This can cause crashes in some cases -- I've added one to
the test suite. (Note that this crasher is just an example, other
ones along the same lines are possible.)
Second, when the language is captured in this way, it means that
Python code cannot affect the current language for its own purposes.
It's reasonable to want to write code like this:
gdb.execute('set language mumble')
... stuff using the current language
gdb.execute('set language previous-value')
However, this won't actually work, because the language is captured on
entry. I've added a test to show this as well.
This patch changes gdb to try to avoid capturing the current values.
The Python concept of the current gdbarch is only set in those few
cases where a non-default value is computed or needed; and the
language is not captured at all -- instead, in the cases where it's
required, the current language is temporarily changed.
|
|||
| 4a94e36819 |
Automatic Copyright Year update after running gdb/copyright.py
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script. |
|||
| 313f3b21cb |
gdb: remove bpstat typedef, rename bpstats to bpstat
I don't find that the bpstat typedef, which hides a pointer, is particularly useful. In fact, it confused me many times, and I just see it as something to remember that adds cognitive load. Also, with C++, we might want to be able to pass bpstats objects by const-reference, not necessarily by pointer. So, remove the bpstat typedef and rename struct bpstats to bpstat (since it represents one bpstat, it makes sense that it is singular). Change-Id: I52e763b6e54ee666a9e045785f686d37b4f5f849 |
|||
| 240edef62f |
gdb: remove iterate_over_breakpoints function
Now that we have range functions that let us use ranged for loops, we can remove iterate_over_breakpoints in favor of those, which are easier to read and write. This requires exposing the declaration of all_breakpoints and all_breakpoints_safe in breakpoint.h, as well as the supporting types. Change some users of iterate_over_breakpoints to use all_breakpoints, when they don't need to delete the breakpoint, and all_breakpoints_safe otherwise. gdb/ChangeLog: * breakpoint.h (iterate_over_breakpoints): Remove. Update callers to use all_breakpoints or all_breakpoints_safe. (breakpoint_range, all_breakpoints, breakpoint_safe_range, all_breakpoints_safe): Move here. * breakpoint.c (all_breakpoints, all_breakpoints_safe): Make non-static. (iterate_over_breakpoints): Remove. * python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb): Return void. * python/py-breakpoint.c (build_bp_list): Add comment, reverse return value logic. * guile/scm-breakpoint.c (bpscm_build_bp_list): Return void. Change-Id: Idde764a1f577de0423e4f2444a7d5cdb01ba5e48 |
|||
| c90e7d6352 |
gdbsupport, gdb: give names to observers
Give a name to each observer, this will help produce more meaningful debug message. gdbsupport/ChangeLog: * observable.h (class observable) <struct observer> <observer>: Add name parameter. <name>: New field. <attach>: Add name parameter, update all callers. Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0 |
|||
| 10a636ccb4 |
gdb/breakpoint: add a 'force_condition' parameter to 'create_breakpoint'
The 'create_breakpoint' function takes a 'parse_extra' argument that
determines whether the condition, thread, and force-condition
specifiers should be parsed from the extra string or be used from the
function arguments. However, for the case when 'parse_extra' is
false, there is no way to pass the force-condition specifier. This
patch adds it as a new argument.
Also, in the case when parse_extra is false, the current behavior is
as if the condition is being forced. This is a bug. The default
behavior should reject the breakpoint. See below for a demo of this
incorrect behavior. (The MI command '-break-insert' uses the
'create_breakpoint' function with parse_extra=0.)
$ gdb -q --interpreter=mi3 /tmp/simple
=thread-group-added,id="i1"
=cmd-param-changed,param="history save",value="on"
=cmd-param-changed,param="auto-load safe-path",value="/"
~"Reading symbols from /tmp/simple...\n"
(gdb)
-break-insert -c junk -f main
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="1.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
(gdb)
break main if junk
&"break main if junk\n"
&"No symbol \"junk\" in current context.\n"
^error,msg="No symbol \"junk\" in current context."
(gdb)
break main -force-condition if junk
&"break main -force-condition if junk\n"
~"Note: breakpoint 1 also set at pc 0x114e.\n"
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
~"Breakpoint 2 at 0x114e: file /tmp/simple.c, line 2.\n"
=breakpoint-created,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="2.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
^done
(gdb)
After applying this patch, we get the behavior below:
(gdb)
-break-insert -c junk -f main
^error,msg="No symbol \"junk\" in current context."
This restores the behavior that is present in the existing releases.
gdb/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (create_breakpoint): Add a new parameter,
'force_condition'.
* breakpoint.c (create_breakpoint): Use the 'force_condition'
argument when 'parse_extra' is false to check if the condition
is invalid at all of the breakpoint locations.
Update the users below.
(break_command_1)
(dprintf_command)
(trace_command)
(ftrace_command)
(strace_command)
(create_tracepoint_from_upload): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update.
* python/py-breakpoint.c (bppy_init): Update.
* python/py-finishbreakpoint.c (bpfinishpy_init): Update.
gdb/testsuite/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.mi/mi-break.exp: Extend with checks for invalid breakpoint
conditions.
|
|||
| 3666a04883 |
Update copyright year range in all GDB files
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|||
| dda83cd783 |
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695 |
|||
| 9dccd06e8a |
Remove target_has_registers macro
This removes the target_has_registers object-like macro, replacing it with the underlying function. gdb/ChangeLog 2020-09-28 Tom Tromey <tom@tromey.com> * tui/tui-regs.c (tui_get_register) (tui_data_window::show_registers): Update. * thread.c (scoped_restore_current_thread::restore) (scoped_restore_current_thread::scoped_restore_current_thread): Update. * regcache-dump.c (regcache_print): Update. * python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb): Update. * mi/mi-main.c (mi_cmd_data_write_register_values): Update. * mep-tdep.c (current_me_module, current_options): Update. * linux-thread-db.c (thread_db_load): Update. * infcmd.c (registers_info, info_vector_command) (info_float_command): Update. * ia64-tdep.c (ia64_frame_prev_register) (ia64_sigtramp_frame_prev_register): Update. * ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update. * gcore.c (derive_stack_segment): Update. * frame.c (get_current_frame, has_stack_frames): Update. * findvar.c (language_defn::read_var_value): Update. * arm-tdep.c (arm_pc_is_thumb): Update. * target.c (target_has_registers): Rename from target_has_registers_1. * target.h (target_has_registers): Remove macro. (target_has_registers): Rename from target_has_registers_1. |
|||
| 7813437494 |
gdb: remove TYPE_CODE macro
Remove TYPE_CODE, changing all the call sites to use type::code directly. This is quite a big diff, but this was mostly done using sed and coccinelle. A few call sites were done by hand. gdb/ChangeLog: * gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use type::code instead. |
|||
| b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|||
| 2e953acac2 |
Fix a bunch of python leaks due to missing calls to tp_free in *_dealloc functions.
valgrind reports leaks in many python tests, such as: ==17162== VALGRIND_GDB_ERROR_BEGIN ==17162== 8,208 (5,472 direct, 2,736 indirect) bytes in 57 blocks are definitely lost in loss record 7,551 of 7,679 ==17162== at 0x4835753: malloc (vg_replace_malloc.c:307) ==17162== by 0x6EAFD1: _PyObject_New (object.c:279) ==17162== by 0x4720E6: blpy_iter(_object*) (py-block.c:92) ==17162== by 0x698772: PyObject_GetIter (abstract.c:2577) ==17162== by 0x2343BE: _PyEval_EvalFrameDefault (ceval.c:3159) ==17162== by 0x22E9E2: function_code_fastcall (call.c:283) ==17162== by 0x2340A8: _PyObject_Vectorcall (abstract.h:127) ==17162== by 0x2340A8: call_function (ceval.c:4987) ==17162== by 0x2340A8: _PyEval_EvalFrameDefault (ceval.c:3486) ==17162== by 0x22E9E2: function_code_fastcall (call.c:283) ==17162== by 0x82172B: _PyObject_Vectorcall (abstract.h:127) ==17162== by 0x82172B: method_vectorcall (classobject.c:67) ==17162== by 0x6AF474: _PyObject_Vectorcall (abstract.h:127) ==17162== by 0x6AF474: _PyObject_CallNoArg (abstract.h:153) ==17162== by 0x6AF474: _PyObject_CallFunctionVa (call.c:914) ==17162== by 0x6B0673: callmethod (call.c:1010) ==17162== by 0x6B0673: _PyObject_CallMethod_SizeT (call.c:1103) ==17162== by 0x477DFE: gdb_PyObject_CallMethod<> (python-internal.h:182) ==17162== by 0x477DFE: get_py_iter_from_func(_object*, char const*) (py-framefilter.c:272) ==17162== by 0x4791B4: py_print_args (py-framefilter.c:706) ==17162== by 0x4791B4: py_print_frame(_object*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, htab*) (py-framefilter.c:960) ==17162== by 0x47A130: gdbpy_apply_frame_filter(extension_language_defn const*, frame_info*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, int) (py-framefilter.c:1236) ==17162== by 0x369C39: apply_ext_lang_frame_filter(frame_info*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, int) (extension.c:563) ==17162== by 0x4EC9C9: backtrace_command_1 (stack.c:2031) ==17162== by 0x4EC9C9: backtrace_command(char const*, int) (stack.c:2183) ... Most of the leaks in python tests are due to the fact that many PyObject xxxxx_dealloc functions are missing the line to free self or obj such as: Py_TYPE (self)->tp_free (self); or Py_TYPE (obj)->tp_free (obj); With this patch, the number of python tests leaking decreases from 52 to 12. gdb/ChangeLog 2019-11-18 Philippe Waroquiers <philippe.waroquiers@skynet.be> * python/py-block.c (blpy_dealloc): Call tp_free. (blpy_block_syms_dealloc): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_dealloc): Likewise. * python/py-inferior.c (infpy_dealloc): Likewise. * python/py-lazy-string.c (stpy_dealloc): Likewise. * python/py-linetable.c (ltpy_iterator_dealloc): Likewise. * python/py-symbol.c (sympy_dealloc): Likewise. * python/py-symtab.c (stpy_dealloc): Likewise. * python/py-type.c (typy_iterator_dealloc): Likewise. |
|||
| 95da600f40 |
Change iterate_over_breakpoints to take a function_view
This allows callers to pass in capturing lambdas. Also changes the return type to bool. gdb/ChangeLog: 2019-10-15 Christian Biesinger <cbiesinger@google.com> * breakpoint.c (iterate_over_breakpoints): Change function pointer to a gdb::function_view and return value to bool. * breakpoint.h (iterate_over_breakpoints): Likewise. * dummy-frame.c (pop_dummy_frame_bpt): Update. (pop_dummy_frame): Update. * guile/scm-breakpoint.c (bpscm_build_bp_list): Update. (gdbscm_breakpoints): Update. * python/py-breakpoint.c (build_bp_list): Update. (gdbpy_breakpoints): Update. * python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb): Update. (bpfinishpy_handle_stop): Update. (bpfinishpy_handle_exit): Update. * solib-svr4.c (svr4_update_solib_event_breakpoint): Update. (svr4_update_solib_event_breakpoints): Update. Change-Id: Ia9de4deecae562a70a40f5cd49f5a74d64570251 |
|||
| 230d2906b9 |
Rename gdb exception types
This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update. |
|||
| a70b814420 |
Rewrite TRY/CATCH
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling. |
|||
| 3fabc0163a |
Do not include py-ref.h in most files
py-ref.h can really only be included from a specific spot in python-internal.h. The other includes are not useful, and cause compilation errors if the includes are ever sorted. So, remove these includes. Arguably, py-ref.h should simply not be a separate header. gdb/ChangeLog 2019-01-22 Tom Tromey <tom@tromey.com> * python/py-arch.c: Do not include py-ref.h. * python/py-bpevent.c: Do not include py-ref.h. * python/py-cmd.c: Do not include py-ref.h. * python/py-continueevent.c: Do not include py-ref.h. * python/py-event.h: Do not include py-ref.h. * python/py-evtregistry.c: Do not include py-ref.h. * python/py-finishbreakpoint.c: Do not include py-ref.h. * python/py-frame.c: Do not include py-ref.h. * python/py-framefilter.c: Do not include py-ref.h. * python/py-function.c: Do not include py-ref.h. * python/py-infevents.c: Do not include py-ref.h. * python/py-linetable.c: Do not include py-ref.h. * python/py-objfile.c: Do not include py-ref.h. * python/py-param.c: Do not include py-ref.h. * python/py-prettyprint.c: Do not include py-ref.h. * python/py-progspace.c: Do not include py-ref.h. * python/py-symbol.c: Do not include py-ref.h. * python/py-symtab.c: Do not include py-ref.h. * python/py-type.c: Do not include py-ref.h. * python/py-unwind.c: Do not include py-ref.h. * python/py-utils.c: Do not include py-ref.h. * python/py-value.c: Do not include py-ref.h. * python/py-varobj.c: Do not include py-ref.h. * python/py-xmethods.c: Do not include py-ref.h. * python/python.c: Do not include py-ref.h. * varobj.c: Do not include py-ref.h. |
|||
| f097f5ad80 |
Fix crash in "finish"
PR gdb/28155 notes a crash in "finish" that occurs with a particular source file compiled by clang. The bug is the typical gdb problem of a missing call to check_typedef. clang emits a function whose return type is a typedef to void. get_return_value asserts that the return type is not void, but the callers were not using check_typedef first. gdb/ChangeLog 2019-01-06 Tom Tromey <tom@tromey.com> PR gdb/28155: * python/py-finishbreakpoint.c (bpfinishpy_init): Use check_typedef. * infcmd.c (finish_command_fsm_should_stop): Use check_typedef. (print_return_value): Likewise. gdb/testsuite/ChangeLog 2019-01-06 Tom Tromey <tom@tromey.com> PR gdb/28155: * gdb.dwarf2/typedef-void-finish.exp: New file. |
|||
| 42a4f53d2b |
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. |
|||
| 00431a78b2 |
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid. |
|||
| 76727919ce |
Convert observers to C++
This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove. |
|||
| e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|||
| ffc2605c41 |
Introduce event_location_up
This removes make_cleanup_delete_event_location and instead changes the various location functions to return an event_location_up, a new unique_ptr typedef. This is largely straightforward, but be sure to examine the init_breakpoint_sal change. I believe the code I deleted there is dead, because "location != NULL" can never be true in that branch; but you should double-check. gdb/ChangeLog 2017-04-12 Tom Tromey <tom@tromey.com> * tracepoint.c (scope_info): Update. * spu-tdep.c (spu_catch_start): Update. * python/python.c (gdbpy_decode_line): Update. * python/py-finishbreakpoint.c (bpfinishpy_init): Update. * python/py-breakpoint.c (bppy_init): Update. * probe.c (parse_probes): Update. * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update. * location.h (event_location_deleter): New struct. (event_location_up): New typedef. (new_linespec_location, new_address_location, new_probe_location) (new_explicit_location, copy_event_location) (string_to_event_location, string_to_event_location_basic) (string_to_explicit_location): Update return type. (make_cleanup_delete_event_location): Remove. * location.c (new_linespec_location, new_address_location) (new_probe_location, new_explicit_location, copy_event_location): Return event_location_up. (delete_event_location_cleanup) (make_cleanup_delete_event_location): Remove. (string_to_explicit_location, string_to_event_location_basic) (string_to_event_location): Return event_location_up. * linespec.c (canonicalize_linespec, event_location_to_sals) (decode_line_with_current_source) (decode_line_with_last_displayed, decode_objc): Update. * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update. * completer.c (location_completer): Update. * cli/cli-cmds.c (edit_command, list_command): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint) (create_thread_event_breakpoint): Update. (init_breakpoint_sal): Update. Remove some dead code. (create_breakpoint_sal): Change type of "location". Update. (create_breakpoints_sal, create_breakpoint, break_command_1) (dprintf_command, break_range_command, until_break_command) (init_ada_exception_breakpoint) (strace_marker_create_sals_from_location) (update_static_tracepoint, trace_command, ftrace_command) (strace_command, create_tracepoint_from_upload): Update. * break-catch-throw.c (re_set_exception_catchpoint): Update. * ax-gdb.c (agent_command_1): Update. |
|||
| a121b7c1ac |
-Wwrite-strings: The Rest
This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify. |
|||
| 2adadf5170 |
-Wwrite-strings: Add a PyArg_ParseTupleAndKeywords "const char *" overload
-Wwrite-strings flags code like:
static char *keywords[] = {"command", "from_tty", "to_string", NULL };
as needing "(char *)" casts, because string literals are "const char []".
We can get rid of the casts by changing the array type like this:
- static char *keywords[] = {"command", "from_tty", "to_string", NULL };
+ static const char *keywords[] = {"command", "from_tty", "to_string", NULL };
However, passing the such array to PyArg_ParseTupleAndKeywords no longer
works OOTB, because PyArg_ParseTupleAndKeywords expects a "char **":
PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw,
const char *format,
char *keywords[], ...);
and "const char **" is not implicitly convertible to "char **". C++
is more tolerant that C here WRT aliasing, and a const_cast<char **>
is fine. However, to avoid having all callers do the cast themselves,
this commit defines a gdb_PyArg_ParseTupleAndKeywords function here
with a corresponding 'keywords' parameter type that does the cast in a
single place.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* python/python-internal.h (gdb_PyArg_ParseTupleAndKeywords): New
static inline function.
* python/py-arch.c (archpy_disassemble): Constify 'keywords'
array and use gdb_PyArg_ParseTupleAndKeywords.
* python/py-cmd.c (cmdpy_init): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-inferior.c (infpy_read_memory, infpy_write_memory)
(infpy_search_memory): Likewise.
* python/py-objfile.c (objfpy_add_separate_debug_file)
(gdbpy_lookup_objfile): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol)
(gdbpy_lookup_global_symbol): Likewise.
* python/py-type.c (gdbpy_lookup_type): Likewise.
* python/py-value.c (valpy_lazy_string, valpy_string): Likewise.
* python/python.c (execute_gdb_command, gdbpy_write, gdbpy_flush):
Likewise.
|
|||
| 0d1f4ceb39 |
-Wwrite-strings: Wrap PyGetSetDef for construction with string literals
Unfortunately, PyGetSetDef's 'name' and 'doc' members are 'char *'
instead of 'const char *', meaning that in order to list-initialize
PyGetSetDef arrays using string literals requires writing explicit
'char *' casts. For example:
static PyGetSetDef value_object_getset[] = {
- { "address", valpy_get_address, NULL, "The address of the value.",
+ { (char *) "address", valpy_get_address, NULL,
+ (char *) "The address of the value.",
NULL },
- { "is_optimized_out", valpy_get_is_optimized_out, NULL,
- "Boolean telling whether the value is optimized "
+ { (char *) "is_optimized_out", valpy_get_is_optimized_out, NULL,
+ (char *) "Boolean telling whether the value is optimized "
"out (i.e., not available).",
NULL },
- { "type", valpy_get_type, NULL, "Type of the value.", NULL },
- { "dynamic_type", valpy_get_dynamic_type, NULL,
- "Dynamic type of the value.", NULL },
- { "is_lazy", valpy_get_is_lazy, NULL,
- "Boolean telling whether the value is lazy (not fetched yet\n\
+ { (char *) "type", valpy_get_type, NULL,
+ (char *) "Type of the value.", NULL },
+ { (char *) "dynamic_type", valpy_get_dynamic_type, NULL,
+ (char *) "Dynamic type of the value.", NULL },
+ { (char *) "is_lazy", valpy_get_is_lazy, NULL,
+ (char *) "Boolean telling whether the value is lazy (not fetched yet\n\
from the inferior). A lazy value is fetched when needed, or when\n\
the \"fetch_lazy()\" method is called.", NULL },
{NULL} /* Sentinel */
We have ~20 such arrays, and I first wrote a patch that fixed all of
them like that... It's not pretty...
One way to make these a bit less ugly would be add a new macro that
hides the casts, like:
#define GDBPY_GSDEF(NAME, GET, SET, DOC, CLOSURE) \
{ (char *) NAME, GET, SET, (char *) DOC, CLOSURE }
and then use it like:
static PyGetSetDef value_object_getset[] = {
GDBPY_GSDEF ("address", valpy_get_address, NULL,
"The address of the value.", NULL),
GDBPY_GSDEF ("is_optimized_out", valpy_get_is_optimized_out, NULL,
"Boolean telling whether the value is optimized ", NULL),
{NULL} /* Sentinel */
};
But since we have C++11, which gives us constexpr and list
initialization, I thought of a way that requires no changes where the
arrays are initialized:
We add a new type that extends PyGetSetDef (called gdb_PyGetSetDef),
and add constexpr constructors that accept const 'name' and 'doc', and
then list/aggregate initialization simply "calls" these matching
constructors instead.
I put "calls" in quotes, because given "constexpr", it's all done at
compile time, and there's no overhead either in binary size or at run
time. In fact, we get identical binaries, before/after this change.
Unlike the fixes that fix some old Python API to match the API of more
recent Python, this switches to using explicit "gdb_PyGetSetDef"
everywhere, just to be clear that we are using our own version of it.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* python/python-internal.h (gdb_PyGetSetDef): New type.
* python/py-block.c (block_object_getset)
(breakpoint_object_getset): Now a gdb_PyGetSetDef array.
* python/py-event.c (event_object_getset)
(finish_breakpoint_object_getset): Likewise.
* python/py-inferior.c (inferior_object_getset): Likewise.
* python/py-infthread.c (thread_object_getset): Likewise.
* python/py-lazy-string.c (lazy_string_object_getset): Likewise.
* python/py-linetable.c (linetable_entry_object_getset): Likewise.
* python/py-objfile.c (objfile_getset): Likewise.
* python/py-progspace.c (pspace_getset): Likewise.
* python/py-record-btrace.c (btpy_insn_getset, btpy_call_getset):
Likewise.
* python/py-record.c (recpy_record_getset): Likewise.
* python/py-symbol.c (symbol_object_getset): Likewise.
* python/py-symtab.c (symtab_object_getset, sal_object_getset):
Likewise.
* python/py-type.c (type_object_getset, field_object_getset):
Likewise.
* python/py-value.c (value_object_getset): Likewise.
|
|||
| 7780f18678 |
Turn gdbpy_ref into a template
This turns gdbpy_ref into a template class, so that it can be used to wrap subclasses of PyObject. The default argument remains PyObject; and this necessitated renaming uses of "gdbpy_ref" to "gdbpy_ref<>". gdb/ChangeLog 2017-02-10 Tom Tromey <tom@tromey.com> * python/py-ref.h (gdbpy_ref_policy): Now a template. (gdbpy_ref): Now a template; allow subclasses of PyObject to be used. * python/py-arch.c, python/py-bpevent.c, python/py-breakpoint.c, python/py-cmd.c, python/py-continueevent.c, python/py-event.c, python/py-exitedevent.c, python/py-finishbreakpoint.c, python/py-framefilter.c, python/py-function.c, python/py-inferior.c, python/py-infevents.c, python/py-linetable.c, python/py-newobjfileevent.c, python/py-param.c, python/py-prettyprint.c, python/py-ref.h, python/py-signalevent.c, python/py-stopevent.c, python/py-symbol.c, python/py-threadevent.c, python/py-type.c, python/py-unwind.c, python/py-utils.c, python/py-value.c, python/py-varobj.c, python/py-xmethods.c, python/python.c, varobj.c: Change gdbpy_ref to gdbpy_ref<>. |
|||
| 16361ffbd1 |
Use gdbpy_ref in bpfinishpy_out_of_scope
This changes bpfinishpy_out_of_scope to use gdbpy_ref. 2017-01-10 Tom Tromey <tom@tromey.com> * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope): Use gdbpy_ref. |
|||
| 6e7c365ee0 |
Use gdbpy_enter in py-finishbreakpoint.c
Change py-finishbreakpoint.c to use gdbpy_enter. 2017-01-10 Tom Tromey <tom@tromey.com> * python/py-finishbreakpoint.c (bpfinishpy_handle_stop) (bpfinishpy_handle_exit): Use gdbpy_enter. |
|||
| 61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|||
| 870f88f755 |
remove trivialy unused variables
gdb/ChangeLog: 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused variables. * aarch64-tdep.c (aarch64_skip_prologue): Likewise. (aarch64_scan_prologue): Likewise. (aarch64_prologue_prev_register): Likewise. (aarch64_dwarf2_prev_register): Likewise. (pass_in_v): Likewise. (aarch64_push_dummy_call): Likewise. (aarch64_breakpoint_from_pc): Likewise. (aarch64_return_in_memory): Likewise. (aarch64_return_value): Likewise. (aarch64_displaced_step_b_cond): Likewise. (aarch64_displaced_step_cb): Likewise. (aarch64_displaced_step_tb): Likewise. (aarch64_gdbarch_init): Likewise. (aarch64_process_record): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise. * alpha-tdep.c (_initialize_alpha_tdep): Likewise. * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise. * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise. * amd64-tdep.c (fixup_riprel): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise. (amd64_windows_frame_decode_insns): Likewise. (amd64_windows_frame_cache): Likewise. (amd64_windows_frame_prev_register): Likewise. (amd64_windows_frame_this_id): Likewise. (amd64_windows_init_abi): Likewise. * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise. * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise. (arm_epilogue_frame_prev_register): Likewise. (arm_record_vdata_transfer_insn): Likewise. (arm_record_exreg_ld_st_insn): Likewise. * auto-load.c (execute_script_contents): Likewise. (print_scripts): Likewise. * avr-tdep.c (avr_frame_prev_register): Likewise. (avr_push_dummy_call): Likewise. * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise. * break-catch-throw.c (fetch_probe_arguments): Likewise. * breakpoint.c (breakpoint_xfer_memory): Likewise. (breakpoint_init_inferior): Likewise. (breakpoint_inserted_here_p): Likewise. (software_breakpoint_inserted_here_p): Likewise. (hardware_breakpoint_inserted_here_p): Likewise. (bpstat_what): Likewise. (break_range_command): Likewise. (save_breakpoints): Likewise. * coffread.c (coff_symfile_read): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. (cris_scan_prologue): Likewise. (cris_register_size): Likewise. (_initialize_cris_tdep): Likewise. * d-exp.y: Likewise. * dbxread.c (dbx_read_symtab): Likewise. (process_one_symbol): Likewise. (coffstab_build_psymtabs): Likewise. (elfstab_build_psymtabs): Likewise. * dicos-tdep.c (dicos_init_abi): Likewise. * disasm.c (do_mixed_source_and_assembly): Likewise. (gdb_disassembly): Likewise. * dtrace-probe.c (dtrace_process_dof): Likewise. * dwarf2read.c (error_check_comp_unit_head): Likewise. (build_type_psymtabs_1): Likewise. (skip_one_die): Likewise. (process_imported_unit_die): Likewise. (dwarf2_physname): Likewise. (read_file_scope): Likewise. (setup_type_unit_groups): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_cu): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (free_dwo_file): Likewise. (check_producer): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (read_unsigned_leb128): Likewise. (read_signed_leb128): Likewise. (dwarf2_const_value): Likewise. (follow_die_sig_1): Likewise. (dwarf_decode_macro_bytes): Likewise. * extension.c (restore_active_ext_lang): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * ft32-tdep.c (ft32_analyze_prologue): Likewise. * gdbtypes.c (lookup_typename): Likewise. (resolve_dynamic_range): Likewise. (check_typedef): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Likewise. (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa32_push_dummy_call): Likewise. (hppa_frame_this_id): Likewise. (_initialize_hppa_tdep): Likewise. * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise. * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise. * i386-tdep.c (i386_bnd_type): Likewise. (i386_gdbarch_init): Likewise. (i386_mpx_bd_base): Likewise. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise. * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise. * ia64-tdep.c (examine_prologue): Likewise. (ia64_frame_cache): Likewise. (ia64_push_dummy_call): Likewise. * infcmd.c (finish_command_fsm_async_reply_reason): Likewise. (default_print_one_register_info): Likewise. * infrun.c (infrun_thread_ptid_changed): Likewise. (thread_still_needs_step_over): Likewise. (stop_all_threads): Likewise. (restart_threads): Likewise. (keep_going_stepped_thread): Likewise. * iq2000-tdep.c (iq2000_scan_prologue): Likewise. * language.c (language_init_primitive_type_symbols): Likewise. * linespec.c (add_sal_to_sals): Likewise. * linux-nat.c (status_callback): Likewise. (kill_unfollowed_fork_children): Likewise. (linux_nat_kill): Likewise. * linux-tdep.c (linux_fill_prpsinfo): Likewise. * linux-thread-db.c (thread_db_notice_clone): Likewise. (record_thread): Likewise. * location.c (string_to_event_location_basic): Likewise. * m32c-tdep.c (m32c_prev_register): Likewise. * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise. * m32r-tdep.c (decode_prologue): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * machoread.c (macho_symtab_read): Likewise. (macho_symfile_read): Likewise. (macho_symfile_offsets): Likewise. * maint.c (set_per_command_cmd): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_exec_run): Likewise. (output_register): Likewise. (mi_cmd_execute): Likewise. (mi_cmd_trace_define_variable): Likewise. (print_variable_or_computed): Likewise. * minsyms.c (prim_record_minimal_symbol_full): Likewise. * mn10300-tdep.c (mn10300_frame_prev_register): Likewise. * msp430-tdep.c (msp430_pseudo_register_write): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nios2-tdep.c (nios2_analyze_prologue): Likewise. (nios2_push_dummy_call): Likewise. (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. (nios2_stub_frame_sniffer): Likewise. (nios2_gdbarch_init): Likewise. * ppc-ravenscar-thread.c: Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * python/py-evts.c (add_new_registry): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. (bpfinishpy_detect_out_scope_cb): Likewise. * python/py-framefilter.c (py_print_value): Likewise. * python/py-inferior.c (infpy_write_memory): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-infthread.c (thpy_get_ptid): Likewise. * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise. (ltpy_get_all_source_lines): Likewise. (ltpy_is_valid): Likewise. (ltpy_iternext): Likewise. * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise. * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise. (unwind_infopy_str): Likewise. * python/py-varobj.c (py_varobj_get_iterator): Likewise. * ravenscar-thread.c (ravenscar_inferior_created): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise. (s390_frame_prev_register): Likewise. (s390_dwarf2_frame_init_reg): Likewise. (s390_record_vr): Likewise. (s390_process_record): Likewise. * score-tdep.c (score_push_dummy_call): Likewise. (score3_analyze_prologue): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. * sh64-tdep.c (sh64_analyze_prologue): Likewise. (sh64_push_dummy_call): Likewise. (sh64_extract_return_value): Likewise. (sh64_do_fp_register): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Likewise. * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise. (darwin_solib_read_all_image_info_addr): Likewise. * solib-dsbt.c (enable_break): Likewise. * solib-frv.c (enable_break2): Likewise. (frv_fdpic_find_canonical_descriptor): Likewise. * solib-svr4.c (svr4_handle_solib_event): Likewise. * sparc-tdep.c (sparc_skip_stack_check): Likewise. * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise. * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stack.c (read_frame_local): Likewise. * symfile.c (symbol_file_add_separate): Likewise. (remove_symbol_file_command): Likewise. * symmisc.c (maintenance_print_one_line_table): Likewise. * symtab.c (symbol_cache_flush): Likewise. (basic_lookup_transparent_type): Likewise. (sort_search_symbols_remove_dups): Likewise. * target.c (target_memory_map): Likewise. (target_detach): Likewise. (target_resume): Likewise. (acquire_fileio_fd): Likewise. (target_store_registers): Likewise. * thread.c (print_thread_info_1): Likewise. * tic6x-tdep.c (tic6x_analyze_prologue): Likewise. * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. (tilegx_analyze_prologue): Likewise. (tilegx_stack_frame_destroyed_p): Likewise. (tilegx_frame_cache): Likewise. * tracefile.c (trace_save): Likewise. * tracepoint.c (encode_actions_and_make_cleanup): Likewise. (start_tracing): Likewise. (print_one_static_tracepoint_marker): Likewise. * tui/tui.c (tui_enable): Likewise. * valops.c (value_struct_elt_bitpos): Likewise. (find_overload_match): Likewise. (find_oload_champ): Likewise. * value.c (value_contents_copy_raw): Likewise. * windows-tdep.c (windows_get_tlb_type): Likewise. * x86-linux-nat.c (x86_linux_enable_btrace): Likewise. * xcoffread.c (record_minimal_symbol): Likewise. (scan_xcoff_symtab): Likewise. * xtensa-tdep.c (execute_code): Likewise. (xtensa_gdbarch_init): Likewise. (_initialize_xtensa_tdep): Likewise. |
|||
| 305e13e67f |
Fix regression introduced in "break *<EXPR>" by explicit location patches.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:
(gdb) b *main
Breakpoint 1 at 0x51a: file hello.c, line 3.
(gdb) run
Starting program: /[...]/hello
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Just for the record, this regression was introduced by:
commit a06efdd6effd149a1d392df8d62824e44872003a
Date: Tue Aug 11 17:09:35 2015 -0700
Subject: Explicit locations: introduce address locations
What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.
However, this does not work in general, as demonstrated in the example
above.
This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.
gdb/ChangeLog:
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
gdb/testsuite/ChangeLog:
* gdb.base/break-fun-addr.exp: New file.
* gdb.base/break-fun-addr1.c: New file.
* gdb.base/break-fun-addr2.c: New file.
|
|||
| 5d5658a1d3 |
Per-inferior/Inferior-qualified thread IDs
This commit changes GDB to track thread numbers per-inferior. Then, if you're debugging multiple inferiors, GDB displays "inferior-num.thread-num" instead of just "thread-num" whenever it needs to display a thread: (gdb) info inferiors Num Description Executable 1 process 6022 /home/pedro/gdb/tests/threads * 2 process 6037 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame 1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running) 1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running) 1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running) 2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running) 2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running) * 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running) (gdb) ... (gdb) thread 1.1 [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))] (gdb) ... etc. You can still use "thread NUM", in which case GDB infers you're referring to thread NUM of the current inferior. The $_thread convenience var and Python's InferiorThread.num attribute are remapped to the new per-inferior thread number. It's a backward compatibility break, but since it only matters when debugging multiple inferiors, I think it's worth doing. Because MI thread IDs need to be a single integer, we keep giving threads a global identifier, _in addition_ to the per-inferior number, and make MI always refer to the global thread IDs. IOW, nothing changes from a MI frontend's perspective. Similarly, since Python's Breakpoint.thread and Guile's breakpoint-thread/set-breakpoint-thread breakpoint methods need to work with integers, those are adjusted to work with global thread IDs too. Follow up patches will provide convenient means to access threads' global IDs. To avoid potencially confusing users (which also avoids updating much of the testsuite), if there's only one inferior and its ID is "1", IOW, the user hasn't done anything multi-process/inferior related, then the "INF." part of thread IDs is not shown. E.g,.: (gdb) info inferiors Num Description Executable * 1 process 15275 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) add-inferior Added inferior 2 (gdb) info threads Id Target Id Frame * 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * NEWS: Mention that thread IDs are now per inferior and global thread IDs. * Makefile.in (SFILES): Add tid-parse.c. (COMMON_OBS): Add tid-parse.o. (HFILES_NO_SRCDIR): Add tid-parse.h. * ada-tasks.c: Adjust to use ptid_to_global_thread_id. * breakpoint.c (insert_breakpoint_locations) (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions) (print_one_breakpoint_location, set_longjmp_breakpoint) (check_longjmp_breakpoint_for_call_dummy) (set_momentary_breakpoint): Adjust to use global IDs. (find_condition_and_thread, watch_command_1): Use parse_thread_id. (until_break_command, longjmp_bkpt_dtor) (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust to use global IDs. * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use ptid_to_global_thread_id. * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. * gdbthread.h (struct thread_info): Rename field 'num' to 'global_num. Add new fields 'per_inf_num' and 'inf'. (thread_id_to_pid): Rename thread_id_to_pid to global_thread_id_to_ptid. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (find_thread_id): Rename to ... (find_thread_global_id): ... this. (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare. (print_thread_info): Add comment. * tid-parse.h: New file. * tid-parse.c: New file. * infcmd.c (step_command_fsm_prepare) (step_command_fsm_should_stop): Adjust to use the global thread ID. (until_next_command, until_next_command) (finish_command_fsm_should_stop): Adjust to use the global thread ID. (attach_post_wait): Adjust to check the inferior number too. * inferior.h (struct inferior) <highest_thread_num>: New field. * infrun.c (handle_signal_stop) (insert_exception_resume_breakpoint) (insert_exception_resume_from_probe): Adjust to use the global thread ID. * record-btrace.c (record_btrace_open): Use global thread IDs. * remote.c (process_initial_stop_replies): Also consider the inferior number. * target.c (target_pre_inferior): Clear the inferior's highest thread num. * thread.c (clear_thread_inferior_resources): Adjust to use the global thread ID. (new_thread): New inferior parameter. Adjust to use it. Set both the thread's global ID and the thread's per-inferior ID. (add_thread_silent): Adjust. (find_thread_global_id): New. (find_thread_id): Make static. Adjust to rename. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (thread_id_to_pid): Rename to ... (global_thread_id_to_ptid): ... this. Adjust. (first_thread_of_process): Adjust. (do_captured_list_thread_ids): Adjust to use global thread IDs. (should_print_thread): New function. (print_thread_info): Rename to ... (print_thread_info_1): ... this, and add new show_global_ids parameter. Handle it. Iterate over inferiors. (print_thread_info): Reimplement as wrapper around print_thread_info_1. (show_inferior_qualified_tids): New function. (print_thread_id): Use it. (tp_array_compar): Compare inferior numbers too. (thread_apply_command): Use tid_range_parser. (do_captured_thread_select): Use parse_thread_id. (thread_id_make_value): Adjust. (_initialize_thread): Adjust "info threads" help string. * varobj.c (struct varobj_root): Update comment. (varobj_create): Adjust to use global thread IDs. (value_of_root_1): Adjust to use global_thread_id_to_ptid. * windows-tdep.c (display_tib): No longer accept an argument. * cli/cli-utils.c (get_number_trailer): Make extern. * cli/cli-utils.h (get_number_trailer): Declare. (get_number_const): Adjust documentation. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global thread IDs. * mi/mi-interp.c (mi_new_thread, mi_thread_exit) (mi_on_normal_stop, mi_output_running_pid, mi_on_resume): * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise. * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x): Likewise. * python/py-breakpoint.c (bppy_set_thread): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. * python/py-infthread.c (thpy_get_num): Add comment and return the per-inferior thread ID. (thread_object_getset): Update comment of "num". gdb/testsuite/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.base/break.exp: Adjust to output changes. * gdb.base/hbreak2.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/watch_thread_num.exp: Likewise. * gdb.linespec/keywords.exp: Likewise. * gdb.multi/info-threads.exp: Likewise. * gdb.threads/thread-find.exp: Likewise. * gdb.multi/tids.c: New file. * gdb.multi/tids.exp: New file. gdb/doc/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Document per-inferior thread IDs, qualified thread IDs, global thread IDs and thread ID lists. (Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to thread IDs. (Convenience Vars): Document the $_thread convenience variable. (Ada Tasks): Adjust to refer to thread IDs. (GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking Commands, GDB/MI Variable Objects): Update to mention global thread IDs. * guile.texi (Breakpoints In Guile) <breakpoint-thread/set-breakpoint-thread breakpoint>: Mention global thread IDs instead of thread IDs. * python.texi (Threads In Python): Adjust documentation of InferiorThread.num. (Breakpoint.thread): Mention global thread IDs instead of thread IDs. |
|||
| 618f726fcb |
GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|||
| 0700e23e5f |
Garbage collect dummy_frame_ctx_saver
Since the "finish" command and infcall's FSMs are now responsible for saving the return value, the dummy_frame_ctx_saver is no longer needed anywhere. gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * infcall.c (struct dummy_frame_context_saver): Delete. (dummy_frame_context_saver_free, dummy_frame_context_saver_dtor) (dummy_frame_context_saver_drop) (dummy_frame_context_saver_cleanup) (dummy_frame_context_saver_get_regs) (dummy_frame_context_saver_setup): Delete. * infcall.h (dummy_frame_context_saver_drop) (dummy_frame_context_saver_cleanup) (dummy_frame_context_saver_get_regs, dummy_frame_context_saver): Delete. (get_return_value): Remove 'ctx_saver' paremeter. Adjust. * inferior.h (get_return_value): Remove 'ctx_saver' paremeter. * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Adjust. |
|||
| 63e43d3aed |
DWARF: handle non-local references in nested functions
GDB's current behavior when dealing with non-local references in the
context of nested fuctions is approximative:
- code using valops.c:value_of_variable read the first available stack
frame that holds the corresponding variable (whereas there can be
multiple candidates for this);
- code directly relying on read_var_value will instead read non-local
variables in frames where they are not even defined.
This change adds the necessary context to symbol reads (to get the block
they belong to) and to blocks (the static link property, if any) so that
GDB can make the proper decisions when dealing with non-local varibale
references.
gdb/ChangeLog:
* ada-lang.c (ada_read_var_value): Add a var_block argument
and pass it to default_read_var_value.
* block.c (block_static_link): New accessor.
* block.h (block_static_link): Declare it.
* buildsym.c (finish_block_internal): Add a static_link
argument. If there is a static link, associate it to the new
block.
(finish_block): Add a static link argument and pass it to
finish_block_internal.
(end_symtab_get_static_block): Update calls to finish_block and
to finish_block_internal.
(end_symtab_with_blockvector): Update call to
finish_block_internal.
* buildsym.h: Forward-declare struct dynamic_prop.
(struct context_stack): Add a static_link field.
(finish_block): Add a static link argument.
* c-exp.y: Remove an obsolete comment (evaluation of variables
already start from the selected frame, and now they climb *up*
the call stack) and propagate the block information to the
produced expression.
* d-exp.y: Likewise.
* f-exp.y: Likewise.
* go-exp.y: Likewise.
* jv-exp.y: Likewise.
* m2-exp.y: Likewise.
* p-exp.y: Likewise.
* coffread.c (coff_symtab_read): Update calls to finish_block.
* dbxread.c (process_one_symbol): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Promote the
"sym" parameter to struct block_symbol, update its uses and pass
its block to calls to read_var_value.
(convert_symbol_sym): Update the calls to convert_one_symbol.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
call to read_var_value.
* dwarf2loc.c (block_op_get_frame_base): New.
(dwarf2_block_frame_base_locexpr_funcs): Implement the
get_frame_base method.
(dwarf2_block_frame_base_loclist_funcs): Likewise.
(dwarf2locexpr_baton_eval): Add a frame argument and use it
instead of the selected frame in order to evaluate the
expression.
(dwarf2_evaluate_property): Add a frame argument. Update call
to dwarf2_locexpr_baton_eval to provide a frame in available and
to handle the absence of address stack.
* dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
* dwarf2read.c (attr_to_dynamic_prop): Add a forward
declaration.
(read_func_scope): Record any available static link description.
Update call to finish_block.
(read_lexical_block_scope): Update call to finish_block.
* findvar.c (follow_static_link): New.
(get_hosting_frame): New.
(default_read_var_value): Add a var_block argument. Use
get_hosting_frame to handle non-local references.
(read_var_value): Add a var_block argument and pass it to the
LA_READ_VAR_VALUE method.
* gdbtypes.c (resolve_dynamic_range): Update calls to
dwarf2_evaluate_property.
(resolve_dynamic_type_internal): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* guile/scm-symbol.c (gdbscm_symbol_value): Update call to
read_var_value (TODO).
* infcmd.c (finish_command_continuation): Update call to
read_var_value, passing it the block coming from symbol lookup.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* language.h (struct language_defn): Add a var_block argument to
the LA_READ_VAR_VALUE method.
* objfiles.c (struct static_link_htab_entry): New.
(static_link_htab_entry_hash): New.
(static_link_htab_entry_eq): New.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
(free_objfile): Free the STATIC_LINKS hashed map if needed.
* objfiles.h: Include hashtab.h.
(struct objfile): Add a static_links field.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
* printcmd.c (print_variable_and_value): Update call to
read_var_value.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-frame.c (frapy_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* python/py-framefilter.c (extract_sym): Add a sym_block
parameter and set the pointed value to NULL (TODO).
(enumerate_args): Update call to extract_sym.
(enumerate_locals): Update calls to extract_sym and to
read_var_value.
* python/py-symbol.c (sympy_value): Update call to
read_var_value (TODO).
* stack.c (read_frame_local): Update call to read_var_value.
(read_frame_arg): Likewise.
(return_command): Likewise.
* symtab.h (struct symbol_block_ops): Add a get_frame_base
method.
(struct symbol): Add a block field.
(SYMBOL_BLOCK): New accessor.
* valops.c (value_of_variable): Remove frame/block handling and
pass the block argument to read_var_value, which does this job
now.
(value_struct_elt_for_reference): Update calls to
read_var_value.
(value_of_this): Pass the block found to read_var_value.
* value.h (read_var_value): Add a var_block argument.
(default_read_var_value): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/nested-subp1.exp: New file.
* gdb.base/nested-subp1.c: New file.
* gdb.base/nested-subp2.exp: New file.
* gdb.base/nested-subp2.c: New file.
* gdb.base/nested-subp3.exp: New file.
* gdb.base/nested-subp3.c: New file.
|
