This converts block_scope, block_set_scope, block_using, and
block_set_using to be methods. These are all done at once to make it
easier to also convert block_initialize_namespace at the same time.
This was mostly written by script.
When a symbol's block is set, the block has the runtime section offset
applied. So, it seems to me that the symbol implicitly is in the same
section as the block. Therefore, this patch sets the symbol's section
index at this same spot.
The previous patch hard-coded SECT_OFF_TEXT into the buildsym code.
After this, it's clear that there is only one caller of
compunit_symtab::set_block_line_section, and it always passes
SECT_OFF_TEXT. So, remove compunit_symtab::m_block_line_section and
use SECT_OFF_TEXT instead.
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
The bit of code removed by this patch was introduced to fix the same
kind of problem that the previous patch fixes. That is, to try to match
existing subfiles when different name forms are used to refer to a same
file.
The thread for the patch that introduced this code is:
https://pi.simark.ca/gdb-patches/45F8CBDF.9090501@hq.tensilica.com/
The important bits are that the compiler produced a compilation unit
with:
DW_AT_name : test.c
DW_AT_comp_dir : /home/maxim/W/BadgerPass/PR_14999
and DWARF v2 line table with:
The Directory Table:
/home/maxim/W/BadgerPass/PR_14999
The File Name Table:
Entry Dir Time Size Name
1 1 1173897037 152 test.c
Because the main symtab was created with only DW_AT_name, it was named
"test.c". And because the path built from the line header contained the
"directory" part, it was "/home/maxim/W/BadgerPass/PR_14999/test.c".
Because of this mismatch, thing didn't work, so they added this code to
prepend the compilation directory to the existing subfile names, so that
this specific case would work.
With the changes done earlier in this series, where subfiles are
identified using the "most complete path possible", this case would be
handled. The main subfile's would be
"/home/maxim/W/BadgerPass/PR_14999/test.c" from the start
(DW_AT_comp_dir + DW_AT_name). It's not so different from some DWARF 5
cases actually, which make the compilation directory explicit in the
line table header.
I therefore think that this code is no longer needed. It does feel like
a quick hack to make one specific case work, and we have a more general
solution now. Also, this code was introduced to work around a problem
in the DWARF debug info or the DWARF debug info reader. In general, I
think it's preferable for these hacks to be located in the specific
debug info reader code, rather than in the common code.
Even though this code was added to work around a DWARF reader problem,
it's possible that some other debug info reader has started taking
advantage of this code in the mean time. It's very difficult to
know or verify, but I think the likelyhood is quite small, so I'm
proposing to get rid of it to simplify things a little bit.
Change-Id: I710b8ec0d449d1b110d67ddf9fcbdb2b37108306
Printing macros defined in the main source file doesn't work reliably
using various toolchains, especially when DWARF 5 is used. For example,
using the binaries produced by either of these commands:
$ gcc --version
gcc (GCC) 11.2.0
$ ld --version
GNU ld (GNU Binutils) 2.38
$ gcc test.c -g3 -gdwarf-5
$ clang --version
clang version 13.0.1
$ clang test.c -gdwarf-5 -fdebug-macro
I get:
$ ./gdb -nx -q --data-directory=data-directory a.out
(gdb) start
Temporary breakpoint 1 at 0x111d: file test.c, line 6.
Starting program: /home/simark/build/binutils-gdb-one-target/gdb/a.out
Temporary breakpoint 1, main () at test.c:6
6 return ZERO;
(gdb) p ZERO
No symbol "ZERO" in current context.
When starting to investigate this (taking the gcc-compiled binary as an
example), we see that GDB fails to look up the appropriate macro scope
when evaluating the expression. While stopped in
macro_lookup_inclusion:
(top-gdb) p name
$1 = 0x62100011a980 "test.c"
(top-gdb) p source.filename
$2 = 0x62100011a9a0 "/home/simark/build/binutils-gdb-one-target/gdb/test.c"
`source` is the macro_source_file that we would expect GDB to find.
`name` comes from the symtab::filename field of the symtab we are
stopped in. GDB doesn't find the appropriate macro_source_file because
the name of the macro_source_file doesn't match exactly the name of the
symtab.
The name of the main symtab comes from the compilation unit's
DW_AT_name, passed to the buildsym_compunit's constructor:
4815d6125e/gdb/dwarf2/read.c (L10627-10630)
The contents of DW_AT_name, in this case, is "test.c". It is typically
(what I witnessed all compilers do) the same string that was passed to
the compiler on the command-line.
The name of the macro_source_file comes from the line number program
header's file table, from the call to the line_header::file_file_name
method:
4815d6125e/gdb/dwarf2/macro.c (L54-65)
line_header::file_file_name prepends the directory path that the file
entry refers to, in the file table (if the file name is not already
absolute). In this case, the file name is "test.c", appended to the
directory "/home/simark/build/binutils-gdb-one-target/gdb".
Because the symtab's name is not created the same way as the
macro_source_file's name is created, we get this mismatch. GDB fails to
find the appropriate macro scope for the symtab, and we can't print
macros when stopped in that symtab.
To make this work, we must ensure that paths produced in these two ways
end up identical. This can be tricky because of the different ways a
path can be passed to the compiler by the user.
Another thing to consider is that while the main symtab's name (or
subfile, before it becomes a symtab) is created using DW_AT_name, the
main symtab is also referred to using its entry in the line table
header's file table, when processing the line table. We must therefore
ensure that the same name is produced in both cases, so that a call to
"start_subfile" for the main subfile will correctly find the
already-created subfile, created by buildsym_compunit's constructor. If
we fail to do that, things still often work, because of a fallback: the
watch_main_source_file_lossage method. This method determines that if
the main subfile has no symbols but there exists another subfile with
the same basename (e.g. "test.c") that does have symbols, it's probably
because there was some filename mismatch. So it replaces the main
subfile with that other subfile. I think that heuristic is useful as a
last effort to work around any bug or bad debug info, but I don't think
we should design things such as to rely on it. It's a heuristic, it can
get things wrong. So in my search for a fix, it is important that given
some good debug info, we don't end up relying on that for things to
work.
A first attempt at fixing this was to try to prepend the compilation
directory here or not prepend it there. In practice, because of all the
possible combinations of debug info the compilers produce, it was not
possible to get something that would produce reliable, consistent paths.
Another attempt at fixing this was to make both macro_source_file
objects and symtab objects use the most complete form of path possible.
That means to prepend directories at least until we get an absolute
path. In theory, we should end up with the same path in all cases.
This generally worked, but because it changed the symtab names, it
resulted in user-visible changes (for example, paths to source files in
Breakpoint hit messages becoming always absolute). I didn't find this
very good, first because there is a "set filename-display" setting that
lets the user control how they want the paths to be displayed, and that
would suddenly make this setting completely ineffective (although even
today, it is a bit dependent on the debug info). Second, it would
require a good amount of testsuite tweaks to make tests accept these
suddenly absolute paths.
This new patch is a slight variation of that: it adds a new field called
"filename_for_id" in struct symtab and struct subfile, next to the
existing filename field. The goal is to separate the internal ids used
for finding objects from the names used for presentation. This field is
used for identifying subfiles, symtabs and macro_source_files
internally. For DWARF symtabs, this new field is meant to contain the
"most complete possible" path, as discussed above. So for a given file,
it must always be in the same form, everywhere. The existing
symtab::filename field remains the one used for printing to the user, so
there shouldn't be any change in how paths are printed.
Changes in the core symtab files are:
- Add "name_for_id" and "filename_for_id" fields to "struct subfile"
and "struct symtab", next to existing "name" and "filename" fields.
- Make buildsym_compunit::buildsym_compunit and
buildsym_compunit::start_subfile accept a "name_for_id" parameter
next to the existing "name" ones.
- Make buildsym_compunit::start_subfile use "name_for_id" for looking
up existing subfiles. This is the key thing for making calls
to start_subfile for the main source file look up the existing
subfile successfully, and avoid relying on
watch_main_source_file_lossage.
- Make sal_macro_scope pass "filename_for_id", rather than "filename",
to macro_lookup_inclusion. This is the key thing to making the
lookup work and macro printing work.
Changes in the DWARF files are:
- Make line_header::file_file_name return the "most complete possible"
name. The only pre-existing user of this method is the macro code,
to give the macro_source_file objects their name. And we now want
them to have this "most complete possible" name, which will match the
corresponding symtab's "filename_for_id".
- Make dwarf2_cu::start_compunit_symtab pass the "most complete
possible" name for the main symtab's "filename_for_id". In this
context, where the info comes from the compilation unit's DW_AT_name
/ DW_AT_comp_dir, it means prepending DW_AT_comp_dir to DW_AT_name if
DW_AT_name is not already absolute.
- Change dwarf2_start_subfile to build a name_for_id for the subfile
being started. The simplest way is to re-use
line_header::file_file_name, since the callers always have a
file_entry handy. This ensures that it will get the exact same path
representation as the macro code does, for the same file (since it
also uses line_header::file_file_name).
- Update calls to allocate_symtab to pass the "name_for_id" from the
subfile.
Tests exercising all this are added by the following patch.
Of all the cases I tried, the only one I found that ends up relying on
watch_main_source_file_lossage is the following one:
$ clang --version
clang version 13.0.1
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
$ clang ./test.c -g3 -O0 -gdwarf-4
$ ./gdb -nx --data-directory=data-directory -q -readnow -iex "set debug symtab-create 1" a.out
...
[symtab-create] start_subfile: name = test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/test.c
[symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
[symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
[symtab-create] start_subfile: found existing symtab with name_for_id /home/simark/build/binutils-gdb-one-target/gdb/./test.c (/home/simark/build/binutils-gdb-one-target/gdb/./test.c)
[symtab-create] watch_main_source_file_lossage: using subfile ./test.c as the main subfile
As we can see, there are two forms used for "test.c", one with a "." and
one without. This comes from the fact that the compilation unit DIE
contains:
DW_AT_name ("test.c")
DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
without a ".", and the line table for that file contains:
include_directories[ 1] = "."
file_names[ 1]:
name: "test.c"
dir_index: 1
When assembling the filename from that entry, we get a ".".
It is a bit unexpected that the main filename resulting from the line
table header does not match exactly the name in the compilation unit.
For instance, gcc uses "./test.c" for the DW_AT_name, which gives
identical paths in the compilation unit and in the line table header.
Similarly, with DWARF 5:
$ clang ./test.c -g3 -O0 -gdwarf-5
clang create two entries that refer to the same file but are of in a different
form.
include_directories[ 0] = "/home/simark/build/binutils-gdb-one-target/gdb"
include_directories[ 1] = "."
file_names[ 0]:
name: "test.c"
dir_index: 0
file_names[ 1]:
name: "test.c"
dir_index: 1
The first file name produces a path without a "." while the second does.
This is not caught by watch_main_source_file_lossage, because of
dwarf_decode_lines that creates a symtab for each file entry in the line
table. It therefore appears as "non-empty" to
watch_main_source_file_lossage. This results in two symtabs:
(gdb) maintenance info symtabs
{ objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00)
{ ((struct compunit_symtab *) 0x62100011aca0)
debugformat DWARF 5
producer clang version 13.0.1
name test.c
dirname /home/simark/build/binutils-gdb-one-target/gdb
blockvector ((struct blockvector *) 0x621000129ec0)
user ((struct compunit_symtab *) (null))
{ symtab test.c ((struct symtab *) 0x62100011ad20)
fullname (null)
linetable ((struct linetable *) 0x0)
}
{ symtab ./test.c ((struct symtab *) 0x62100011ad60)
fullname (null)
linetable ((struct linetable *) 0x621000129ef0)
}
}
}
I am not sure what is the consequence of this, but this is also what
happens before my patch, so I think its acceptable to leave it as-is.
To handle these two cases nicely, I think we will need a function that
removes the unnecessary "." from path names, something that can be done
later.
Finally, I made a change in find_file_and_directory is necessary to
avoid breaking test
gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42
Without that change, we would get:
(gdb) info source
Current source file is /dir/d/dw2-compdir-oldgcc42.S
Compilation directory is /dir/d
whereas the expected result is:
(gdb) info source
Current source file is dw2-compdir-oldgcc42.S
Compilation directory is /dir/d
This test was added here:
https://sourceware.org/pipermail/gdb-patches/2012-November/098144.html
Long story short, GCC <= 4.2 apparently had a bug where it would
generate a DW_AT_name with a full path ("/dir/d/dw2-compdir-oldgcc42.S")
and no DW_AT_comp_dir. The line table has one entry with filename
"dw2-compdir-oldgcc42.S", which refers to directory 0. Directory 0
normally refers to the compilation unit's comp dir, but it is
non-existent in this case.
This caused some symtab lookup problems, and to work around them, some
workaround was added, which today reads as:
if (res.get_comp_dir () == nullptr
&& producer_is_gcc_lt_4_3 (cu)
&& res.get_name () != nullptr
&& IS_ABSOLUTE_PATH (res.get_name ()))
res.set_comp_dir (ldirname (res.get_name ()));
Source: 6577f365eb/gdb/dwarf2/read.c (L9428-9432)
It extracts an artificial DW_AT_comp_dir from DW_AT_name, if there is no
DW_AT_comp_dir and DW_AT_name is absolute.
Prior to my patch, a subfile would get created with filename
"/dir/d/dw2-compdir-oldgcc42.S", from DW_AT_name, and another would get
created with filename "dw2-compdir-oldgcc42.S" from the line table's
file table. Then watch_main_source_file_lossage would kick in and merge
them, keeping only the "dw2-compdir-oldgcc42.S" one:
[symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name dw2-compdir-oldgcc42.S (dw2-compdir-oldgcc42.S)
[symtab-create] watch_main_source_file_lossage: using subfile dw2-compdir-oldgcc42.S as the main subfile
And so "info source" would show "dw2-compdir-oldgcc42.S" as the
filename.
With my patch applied, but without the change in
find_file_and_directory, both DW_AT_name and the line table would try to
start a subfile with the same filename_for_id, and there was no need for
watch_main_source_file_lossage - which is what we want:
[symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
But since the one with name == "/dir/d/dw2-compdir-oldgcc42.S", coming
from DW_AT_name, gets created first, it wins, and the symtab ends up
with "/dir/d/dw2-compdir-oldgcc42.S" as the name, "info source" shows
"/dir/d/dw2-compdir-oldgcc42.S" and the test breaks.
This is not wrong per-se, after all DW_AT_name is
"/dir/d/dw2-compdir-oldgcc42.S", so it wouldn't be wrong to report the
current source file as "/dir/d/dw2-compdir-oldgcc42.S". If you compile
a file passing "/an/absolute/path.c", DW_AT_name typically contains (at
least with GCC) "/an/absolute/path.c" and GDB tells you that the source
file is "/an/absolute/path.c". But we can also keep the existing
behavior fairly easily with a little change in find_file_and_directory.
When extracting an artificial DW_AT_comp_dir from DW_AT_name, we now
modify the name to just keep the file part. The result is coherent with
what compilers do when you compile a file by just passing its filename
("gcc path.c -g"):
DW_AT_name ("path.c")
DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
With this change, filename_for_id is still the full name,
"/dir/d/dw2-compdir-oldgcc42.S", but the filename of the subfile /
symtab (what ends up shown by "info source") is just
"dw2-compdir-oldgcc42.S", and that makes the test happy.
Change-Id: I8b5cc4bb3052afdb172ee815c051187290566307
Mutable addrmaps currently require an obstack. This was probably done
to avoid having to call splay_tree_delete, but examination of the code
shows that all mutable obstacks have a limited lifetime -- now it's
simple to treat them as ordinary C++ objects, in some cases
stack-allocating them, and have a destructor to make the needed call.
This patch implements this change.
Replace with calls to blockvector::blocks, and the appropriate method
call on the returned array_view.
Change-Id: I04d1f39603e4d4c21c96822421431d9a029d8ddd
In this review [1], Eli pointed out that we should be careful when
concatenating file names to avoid duplicated slashes. On Windows, a
double slash at the beginning of a file path has a special meaning. So
naively concatenating "/" and "foo/bar" would give "//foo/bar", which
would not give the desired results. We already have a few spots doing:
if (first_path ends with a slash)
path = first_path + second_path
else
path = first_path + slash + second_path
In general, I think it's nice to avoid superfluous slashes in file
paths, since they might end up visible to the user and look a bit
unprofessional.
Introduce the path_join function that can be used to join multiple path
components together (along with unit tests).
I initially wanted to make it possible to join two absolute paths, to
support the use case of prepending a sysroot path to a target file path,
or the prepending the debug-file-directory to a target file path. But
the code in solib_find_1 shows that it is more complex than this anyway
(for example, when the right hand side is a Windows path with a drive
letter). So I don't think we need to support that case in path_join.
That also keeps the implementation simpler.
Change a few spots to use path_join to show how it can be used. I
believe that all the spots I changed are guarded by some checks that
ensure the right hand side operand is not an absolute path.
Regression-tested on Ubuntu 18.04. Built-tested on Windows, and I also
ran the new unit-test there.
[1] https://sourceware.org/pipermail/gdb-patches/2022-April/187559.html
Change-Id: I0df889f7e3f644e045f42ff429277b732eb6c752
Change this field to an std::vector to facilitate memory management.
Since the linetable_entry array is copied into the symtab resulting from
the subfile, it is possible to change it without changing how symtab
stores the linetable entries (which would be a much larger change).
There is a small change in buildsym_compunit::record_line to avoid
accessing a now invalid linetable_entry. Before this patch, we keep a
pointer to the last linetable entry, pop it from the vector, and then
read last->line. It works with the manually-maintained array, but since
we now use std::vector::pop_back, I am afraid that it could be flagged
as an invalid access by the various static / dynamic analysis tools to
access the linetable_entry object after popping it from the vector.
Instead, record just the line number in an optional and use it.
There are substantial changes in xcoffread.c that simplify the code, but
I can't test them. I was hesitant to do this change because of that,
but I decided to send it anyway. I don't think that an almost dead
platform should hold back improving the code in the common parts of GDB.
The changes in xcoffread.c are:
- Make arrange_linetable "arrange" the linetable passed as a parameter,
instead of returning possibly a new one, possibly the same one.
- In the "Process main file's line numbers.", I'm not too sure what
happens. We get the lintable from "main_subfile", "arrange" it, but
then assign the result to the current subfile, obtained with
get_current_subfile. I assume that the current subfile is also the
main one, so now I just call arrange_linetable on the main subfile's
line table.
- Remove that weird "Useless if!!!" FIXME comment. It's been there
forever, but the "if" is still there, so I guess the "if" can stay
there.
Change-Id: I11799006fd85189e8cf5bd3a168f8f38c2c27a80
Change subfile::name to be a string, for easier memory management.
Change buildsym_compunit::m_comp_dir as well, since we move one in to
the other at some point in patch_subfile_names, so it's easier to do
both at the same time. There are various NULL checks for both fields
currently, replace them with empty checks, I think it ends up
equivalent.
I can't test the change in xcoffread.c, it's best-effort.
Change-Id: I62b5fb08b2089e096768a090627ac7617e90a016
Allocate struct subfile with new, initialize its fields instead of
memset-ing it to 0. Use a unique_ptr for the window after a subfile has
been allocated but before it is linked in the buildsym_compunit's list
of subfile (and therefore owned by the buildsym_compunit.
I can't test the change in xcoffread.c, it's best-effort. I couldn't
find where subfiles are freed in that file, I assume they were
intentionally (or not) leaked.
Change-Id: Ib3b6877de31b7e65bc466682f08dbf5840225f24
Add support for DW_LNS_set_prologue_end when building line-tables. This
attribute can be set by the compiler to indicate that an instruction is
an adequate place to set a breakpoint just after the prologue of a
function.
The compiler might set multiple prologue_end, but considering how
current skip_prologue_using_sal works, this commit modifies it to accept
the first instruction with this marker (if any) to be the place where a
breakpoint should be placed to be at the end of the prologue.
The need for this support came from a problematic usecase generated by
hipcc (i.e. clang). The problem is as follows: There's a function
(lets call it foo) which covers PC from 0xa800 to 0xa950. The body of
foo begins with a call to an inlined function, covering from 0xa800 to
0xa94c. The issue is that when placing a breakpoint at 'foo', GDB
inserts the breakpoint at 0xa818. The 0x18 offset is what GDB thinks is
foo's first address past the prologue.
Later, when hitting the breakpoint, GDB reports the stop within the
inlined function because the PC falls in its range while the user
expects to stop in FOO.
Looking at the line-table for this location, we have:
INDEX LINE ADDRESS IS-STMT
[...]
14 293 0x000000000000a66c Y
15 END 0x000000000000a6e0 Y
16 287 0x000000000000a800 Y
17 END 0x000000000000a818 Y
18 287 0x000000000000a824 Y
[...]
For comparison, let's look at llvm-dwarfdump's output for this CU:
Address Line Column File ISA Discriminator Flags
------------------ ------ ------ ------ --- ------------- -------------
[...]
0x000000000000a66c 293 12 2 0 0 is_stmt
0x000000000000a6e0 96 43 82 0 0 is_stmt
0x000000000000a6f8 102 18 82 0 0 is_stmt
0x000000000000a70c 102 24 82 0 0
0x000000000000a710 102 18 82 0 0
0x000000000000a72c 101 16 82 0 0 is_stmt
0x000000000000a73c 2915 50 83 0 0 is_stmt
0x000000000000a74c 110 1 1 0 0 is_stmt
0x000000000000a750 110 1 1 0 0 is_stmt end_sequence
0x000000000000a800 107 0 1 0 0 is_stmt
0x000000000000a800 287 12 2 0 0 is_stmt prologue_end
0x000000000000a818 114 59 81 0 0 is_stmt
0x000000000000a824 287 12 2 0 0 is_stmt
0x000000000000a828 100 58 82 0 0 is_stmt
[...]
The main difference we are interested in here is that llvm-dwarfdump's
output tells us that 0xa800 is an adequate place to place a breakpoint
past a function prologue. Since we know that foo covers from 0xa800 to
0xa94c, 0xa800 is the address at which the breakpoint should be placed
if the user wants to break in foo.
This commit proposes to add support for the prologue_end flag in the
line-program processing.
The processing of this prologue_end flag is made in skip_prologue_sal,
before it calls gdbarch_skip_prologue_noexcept. The intent is that if
the compiler gave information on where the prologue ends, we should use
this information and not try to rely on architecture dependent logic to
guess it.
The testsuite have been executed using this patch on GNU/Linux x86_64.
Testcases have been compiled with both gcc/g++ (verison 9.4.0) and
clang/clang++ (version 10.0.0) since at the time of writing GCC does not
set the prologue_end marker. Tests done with GCC 11.2.0 (not over the
entire testsuite) show that it does not emit this flag either.
No regression have been observed with GCC or Clang. Note that when
using Clang, this patch fixes a failure in
gdb.opt/inline-small-func.exp.
Change-Id: I720449a8a9b2e1fb45b54c6095d3b1e9da9152f8
Currently when recording a line entry (with
buildsym_compunit::record_line), a boolean argument argument is used to
indicate that the is_stmt flag should be set for this particular record.
As a later commit will add support for new flags, instead of adding a
parameter to record_line for each possible flag, transform the current
is_stmt parameter into a enum flag. This flags parameter will allow
greater flexibility in future commits.
This enum flags type is not propagated into the linetable_entry type as
this would require a lot of changes across the codebase for no practical
gain (it currently uses a bitfield where each interesting flag only
occupy 1 bit in the structure).
Tested on x86_64-linux, no regression observed.
Change-Id: I5d061fa67bdb34918742505ff983d37453839d6a
It's a bit confusing because we have both "compunit_symtab" and "symtab"
types, and many methods and functions containing "start_symtab" or
"end_symtab", which actually deal with compunit_symtabs. I believe this
comes from the time before compunit_symtab was introduced, where
symtab did the job of both.
Rename everything I found containing start_symtab or end_symtab to use
start_compunit_symtab or end_compunit_symtab.
Change-Id: If3849b156f6433640173085ad479b6a0b085ade2
Add a getter and a setter for a symbol's type. Remove the corresponding
macro and adjust all callers.
Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de
Add a getter and a setter for whether a symbol is an argument. Remove
the corresponding macro and adjust all callers.
Change-Id: I71b4f0465f3dfd2ed8b9e140bd3f7d5eb8d9ee81
Add a getter and a setter for a symtab's language. Remove the
corresponding macro and adjust all callers.
Change-Id: I9f4d840b11c19f80f39bac1bce020fdd1739e11f
Add a getter and a setter for a symtab's linetable. Remove the
corresponding macro and adjust all callers.
Change-Id: I159183fc0ccd8e18ab937b3c2f09ef2244ec6e9c
Add a getter and a setter for a compunit_symtab's macro table. Remove the
corresponding macro and adjust all callers.
Change-Id: I00615ea72d5ac43d9a865e941cb2de0a979c173a
Add a getter and a setter for a compunit_symtab's block line section. Remove
the corresponding macro and adjust all callers.
Change-Id: I3eb1a323388ad55eae8bfa45f5bc4a08dc3df455
Add a getter and a setter for a compunit_symtab's blockvector. Remove
the corresponding macro and adjust all callers.
Change-Id: I99484c6619dcbbea7c5d89c72aa660316ca62f64
Add a getter and a setter for a compunit_symtab's dirname. Remove the
corresponding macro and adjust all callers.
Change-Id: If2f39b295fd26822586485e04a8b8b5aa5cc9b2e
Add a getter and a setter for a compunit_symtab's producer. Remove the
corresponding macro and adjust all callers.
Change-Id: Ia1d6d8a0e247a08a21af23819d71e49b37d8931b
Add a getter and a setter for a compunit_symtab's debugformat. Remove
the corresponding macro and adjust all callers.
Change-Id: I1667b02d5322346f8e23abd9f8a584afbcd75975
I think that most remaining uses of COMPUNIT_FILETABS intend to get the
primary filetab of the compunit_symtab specifically (and not to iterate
over all filetabs, for example, those cases would use compunit_filetabs,
which has been converted to compunit_symtab::filetabs), so replace mosts
uses with compunit_symtab::primary_filetab.
In jit.c, function finalize_symtab, we can save the symtab object
returned by allocate_symtab and use it, it makes things simpler.
Change-Id: I4e51d6d4b40759de8768b61292e5e13c8eae2e38
Add a method to set the primary filetab of the CU. This is currently
done in buildsym_compunit::end_symtab_with_blockvector.
Change-Id: I16c51a6b90a4cb4c0c5f183b0f2e12bc64b6fd74
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
While working on PR26935 I noticed that when running test-case
gdb.base/morestack.exp with target board unix/-m32/-fPIE/-pie and ld linker,
I get this linetable fragment for morestack.S using readelf -wL:
...
CU: ../../../../libgcc/config/i386/morestack.S:
Line number Starting address View Stmt
109 0xc9c x
...
838 0xe03 x
- 0xe04
636 0 x
637 0x3 x
- 0x4
...
but with "maint info line-table" I get:
...
INDEX LINE ADDRESS IS-STMT
0 END 0x00000004 Y
1 109 0x00000c9c Y
...
110 838 0x00000e03 Y
111 END 0x00000e04 Y
...
So, apparently the entries with addresses 0x0 and 0x3 are filtered out
because the addresses are out of range, but the same doesn't happen with the
end-of-seq terminator.
Fix this by filtering out end-of-seq terminators that do not actually
terminate anything.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-01-04 Tom de Vries <tdevries@suse.de>
* buildsym.c (buildsym_compunit::record_line): Filter out end-of-seq
terminators that do not terminate anything.
gdb/testsuite/ChangeLog:
2021-01-04 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: New file.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Consider test-case gdb.dwarf2/dw2-ranges-base.exp. It has (ignoring
non-sensical entries that are filtered out by buildsym_compunit::record_line)
a line-table for dw2-ranges-base.c like this:
...
Line Number Statements:
[0x0000014e] Extended opcode 2: set Address to 0x4004ba
[0x00000159] Advance Line by 10 to 11
[0x0000015b] Copy
[0x0000015c] Advance PC by 12 to 0x4004c6
[0x0000015e] Extended opcode 1: End of Sequence
[0x00000161] Extended opcode 2: set Address to 0x4004ae
[0x0000016c] Advance Line by 20 to 21
[0x0000016e] Copy
[0x0000016f] Advance PC by 12 to 0x4004ba
[0x00000171] Extended opcode 1: End of Sequence
[0x00000174] Extended opcode 2: set Address to 0x4004a7
[0x0000017f] Advance Line by 30 to 31
[0x00000181] Copy
[0x00000182] Advance PC by 7 to 0x4004ae
[0x00000184] Extended opcode 1: End of Sequence
...
If we disable the sorting in buildsym_compunit::end_symtab_with_blockvector,
we have the unsorted line table:
...
INDEX LINE ADDRESS IS-STMT
0 11 0x00000000004004ba Y
1 END 0x00000000004004c6 Y
2 21 0x00000000004004ae Y
3 END 0x00000000004004ba Y
4 31 0x00000000004004a7 Y
5 END 0x00000000004004ae Y
...
It contains 3 sequences, 11/END, 21/END and 31/END.
We want to sort the 3 sequences relative to each other, while sorting on
address, to get:
...
INDEX LINE ADDRESS IS-STMT
0 31 0x00000000004004a7 Y
1 END 0x00000000004004ae Y
2 21 0x00000000004004ae Y
3 END 0x00000000004004ba Y
4 11 0x00000000004004ba Y
5 END 0x00000000004004c6 Y
...
However, if we re-enable the sorting, we have instead:
...
INDEX LINE ADDRESS IS-STMT
0 31 0x00000000004004a7 Y
1 21 0x00000000004004ae Y
2 END 0x00000000004004ae Y
3 11 0x00000000004004ba Y
4 END 0x00000000004004ba Y
5 END 0x00000000004004c6 Y
...
This is a regression since commit 3d92a3e313 "gdb: Don't reorder line table
entries too much when sorting", that introduced sorting on address while
keeping entries with the same address in pre-sort order.
Indeed the entries 1 and 2 are in pre-sort order (they map to entries 2 and 5
in the unsorted line table), but entry 1 does not belong in the sequence
terminated by 2.
Fix this by handling End-Of-Sequence entries in the sorting function, such
that they are sorted before other entries with the same address.
Also, revert the find_pc_sect_line workaround introduced in commit 3d92a3e313,
since that's no longer necessary.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-07-06 Tom de Vries <tdevries@suse.de>
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Handle
End-Of-Sequence in lte_is_less_than.
* symtab.c (find_pc_sect_line): Revert change from commit 3d92a3e313
"gdb: Don't reorder line table entries too much when sorting".
gdb/testsuite/ChangeLog:
2020-07-06 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-ranges-base.exp: Test line-table order.
Add the `type` and `set_type` methods on `struct field`, in order to
remoremove the `FIELD_TYPE` macro. In this patch, the `FIELD_TYPE`
macro is changed to use `field::type`, so all the call sites that are
useused to set the field's type are changed to use `field::set_type`.
The next patch will remove `FIELD_TYPE` completely.
Note that because of the name clash between the existing field named
`type` and the new method, I renamed the field `m_type`. It is not
private per-se, because we can't make `struct field` a non-POD yet, but
it should be considered private anyway (not accessed outside `struct
field`).
gdb/ChangeLog:
* gdbtypes.h (struct field) <type, set_type>: New methods.
Rename `type` field to...
<m_type>: ... this. Change references throughout to use type or
set_type methods.
(FIELD_TYPE): Use field::type. Change call sites that modify
the field's type to use field::set_type instead.
Change-Id: Ie21f866e3b7f8a51ea49b722d07d272a724459a0
