Fix these fails:
alpha-dec-vms +FAIL: ld-scripts/asciz
alpha-dec-vms +FAIL: ld-scripts/ascii
i386-go32 +FAIL: ld-scripts/asciz
sh-coff +FAIL: ld-scripts/asciz
It's better to positively select targets for .section support than to
try to exclude all targets that don't. Make a new is_coff_format so
we can easily select such.
binutils/
* testsuite/lib/binutils-common.exp (is_coff_format): New.
ld/
* testsuite/ld-scripts/ascii.d: Use is_elf_format and
is_coff_format to select targets, exclude ti coff.
* testsuite/ld-scripts/asciz.d: Likewise. Accept trailing zeros.
I don't see much point in cluttering the source with the PROGRESS
macros, which of course do nothing at all with the definitions in
progress.h. progress.h is unchanged apart from the copyright comment
since commit d4d4c53c68f0 in 1994.
binutils/
* ar.c: Don't include progress.h, or invoke PROGRESS macros.
* nm.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
gas/
* as.h: Don't include progress.h.
* as.c: Don't invoke PROGRESS macros.
* write.c: Likewise.
include/
* progress.h: Delete.
ld/
* ldmain.c: Don't include progress.h, or invoke PROGRESS macros.
This function is used to read sections other than stabs, and there is
now another version of it that extracts different info from the bfd
section. Rename it and return the bfd section instead of assorted
fields of the bfd section.
* objcopy.c (read_section): Renamed from read_section_stabs.
Delete size_ptr and entsize_ptr params, add contents param.
Return asection pointer. Don't unnecessarily free contents on
failure from bfd_malloc_and_get_section.
(find_stabs_section): Use read_section.
(dump_ctf, dump_section_sframe): Likewise.
(read_section_sframe): Delete.
Fuzzers have found that specifying a large stab type number results in
lots of memory being requested, as the list is extended with a 16
element array at a time until we reach the given stab type. It also
takes a long time. Of course normal sane stab types use small
positive integers, but it's not hard to modify the code to handle type
numbers starting anyhere.
* stabs.c (struct stab_types): Add base_index.
(stab_find_slot): Simplify filenum check. Delete type number
check. Don't allocate entire array from 0 to type number,
allocate a sparse array.
Before commit:
commit 2438b771ee07be19d5b01ea55e077dd8b7cef445
Date: Wed Nov 2 15:53:43 2022 +0000
opcodes/mips: use .word/.short for undefined instructions
unknown 32-bit microMIPS instructions were disassembled as a raw
32-bit number with no '.word' directive. The above commit changed
this and added a '.word' directive before the 32-bit number.
It was pointed out on the mailing list, that for microMIPS it would be
better to display such 32-bit instructions using a '.short' directive
followed by two 16-bit values.
This commit updates the mips disassembler to do this, and adds a new
test that validates this output.
This fixes some objcopy memory leaks. commit 450da4bd38ae used
xatexit to tidy most of the hash table memory, but of course that's
ineffective without a call to xexit. The other major memory leak
happens if there is an error of some sort writing the output file, due
to not closing the input file and thus not freeing memory attached to
the bfd.
* objcopy.c (copy_file): Don't return when bfd_close of output
gives an error, always bfd_close input too.
(main): Call xexit.
There is some inconsistency between the behaviour of objdump -D and
objdump -s, both supposedly operating on all sections by default.
objdump -s ignores bss sections, while objdump -D dissassembles the
zeros. Fix this by making objdump -D ignore bss sections too.
Furthermore, "objdump -s -j .bss" doesn't dump .bss as it should,
since the user is specifically asking to look at all those zeros.
This change does find some tests that used objdump -D with expected
output in bss-style sections. I've updated all the msp430 tests that
just wanted to find a non-empty section to look at section headers
instead, making the tests slightly more stringent. The ppc xcoff and
spu tests are fixed by adding -j options to objdump, which makes the
tests somewhat more lenient.
binutils/
* objdump.c (disassemble_section): Ignore sections without
contents, unless overridden by -j.
(dump_section): Allow -j to override the default of not
displaying sections without contents.
* doc/binutils.texi (objdump options): Update -D, -s and -j
description.
gas/
* testsuite/gas/ppc/xcoff-tls-32.d: Select wanted objdump
sections with -j.
* testsuite/gas/ppc/xcoff-tls-64.d: Likewise.
ld/
* testsuite/ld-msp430-elf/main-bss-lower.d,
* testsuite/ld-msp430-elf/main-bss-upper.d,
* testsuite/ld-msp430-elf/main-const-lower.d,
* testsuite/ld-msp430-elf/main-const-upper.d,
* testsuite/ld-msp430-elf/main-text-lower.d,
* testsuite/ld-msp430-elf/main-text-upper.d,
* testsuite/ld-msp430-elf/main-var-lower.d,
* testsuite/ld-msp430-elf/main-var-upper.d: Expect -wh output.
* testsuite/ld-msp430-elf/msp430-elf.exp: Use objdump -wh
rather than objdump -D or objdump -d with tests checking for
non-empty given sections.
* testsuite/ld-spu/ear.d,
* testsuite/ld-spu/icache1.d,
* testsuite/ld-spu/ovl.d,
* testsuite/ld-spu/ovl2.d: Select wanted objdump sections.
I've found that I often use dwarf-mode with relatively small test
files. In this situation, it's handy to be able to expand all the
DWARF, rather than moving to each "..." separately and using C-u C-m.
This patch implements this feature. It also makes a couple of other
minor changes:
* I removed a stale FIXME from dwarf-mode. In practice I find I often
use "g" to restore the buffer to a pristine state; checking the file
mtime would work against this.
* I tightened the regexp in dwarf-insert-substructure. This prevents
the C-m binding from trying to re-read a DIE which has already been
expanded.
* Finally, I've bumped the dwarf-mode version number so that this
version can easily be installed using package.el.
2023-02-09 Tom Tromey <tromey@adacore.com>
* dwarf-mode.el: Bump version to 1.8.
(dwarf-insert-substructure): Tighten regexp.
(dwarf-refresh-all): New defun.
(dwarf-mode-map): Bind "A" to dwarf-refresh-all.
(dwarf-mode): Remove old FIXME.
If file size is calculated by bfd_get_file_size, as it is by
_bfd_alloc_and_read calls in coff_object_p, then it is cached and when
pe_ILF_build_a_bfd converts an archive entry over to BFD_IN_MEMORY,
the file size is no longer valid. Found when attempting objdump -t on
a very small (27 bytes) ILF file and hitting the pr24707 fix (commit
781152ec18f5). So, clear file size when setting BFD_IN_MEMORY on bfds
that may have been read. (It's not necessary in writable bfds,
because caching is ignored by bfd_get_size when bfd_write_p.)
I also think the PR 24707 fix is no longer neeeded. All of the
testcases in that PR and in PR24712 are caught earlier by file size
checks when reading the symbols from file. So I'm reverting that fix,
which just compared the size of an array of symbol pointers against
file size. That's only valid if on-disk symbols are larger than a
host pointer, so the test is better done in format-specific code.
bfd/
* coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Clear cached
file size when making a BFD_IN_MEMORY bfd.
* opncls.c (bfd_make_readable): Likewise.
* peicode.h (pe_ILF_build_a_bfd): Likewise.
binutils/
PR 24707
* objdump.c (slurp_symtab): Revert PR24707 fix. Tidy.
(slurp_dynamic_symtab): Tidy.
Insn width granularity being 16 bits, producing byte granular output
isn't very useful. With there being a way to specific otherwise
unknown insns to the assembler, use that same representation (to be
precise: its <length>,<encoding> flavor) for disassembly.
After bfd_close nothing should access bfd memory. Now that bfd_close
always tidies up even after an error, attempting to tidy the cached
bfd list by calling bfd_cache_close is wrong and not needed.
PR 30060
* ar.c (remove_output): Don't call bfd_cache_close.
(output_bfd): Delete.
* arsup.c (ar_end): Call bfd_close_all_done, not bfd_cache_close.
This adjusts the testsuite to get rid of a number of XPASSes that have
appeared. Someone might like to look into a better patch for the s390
change.
aarch64-pe XPASS: weak symbols
arm-nacl XPASS: rgn-over8
mcore-pe XPASS: ld-scripts/provide-8
mips64-linux-gnuabi64 XPASS: vers4
mips64-linux-gnuabi64 XPASS: vers4b
mips-linux-gnu XPASS: vers4
mips-linux-gnu XPASS: vers4b
s390-linux-gnu XPASS: undefined line
sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME
sh-coff XPASS: objcopy object (simple copy)
sh-coff XPASS: objcopy executable (pr25662)
binutils/
* testsuite/binutils-all/objcopy.exp: Don't xfail "simple
copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails
on "ELF unknown section type" test.
ld/
* testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail
all mips, just xfail mips irix.
* testsuite/ld-gc/pr19161.d: Don't xfail sh.
* testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl.
* testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe.
* testsuite/ld-undefined/undefined.exp: Conditionally xfail
"undefined line" depending on gcc version for s390.
If objdump is used with both --disassemble=symbol and --reloc options
skip relocations that have addresses before the symbol, so that they
are not displayed.
This adds a mingw target for aarch64, including windres and dlltool.
Note that the old value of jmp_aarch64_bytes was wrong, and this does
the same thing as MSVC does.
The bfd_coff_backend_data struct should be read-only, the only thing
preventing this is that objcopy writes to one of the fields,
_bfd_coff_long_section_names. This patch creates a copy of the field
in bfd coff_obj_tdata, which makes more sense anyway. When enabling
long section names the intent is to do so for a particular bfd, not
for all bfds that might happen to be using the target xvec.
bfd/
* coffcode.h: Update coff long section name comment.
(bfd_coff_set_long_section_names_allowed): Use macro accessor
to set flag.
(bfd_coff_set_long_section_names_disallowed): Tidy.
(coff_backend_info): Return a const pointer.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table),
(bigobj_swap_table): Make const.
(bfd_coff_long_section_names): Use tdata copy.
(coff_mkobject): Set long_section_names from coff_backend_info.
* coff-go32.c (_bfd_go32_mkobject): Likewise.
* peicode.h (pe_mkobject): Likewise.
* coff-sh.c (bfd_coff_small_swap_table): Make const.
* libcoff-in.h (struct coff_tdata): Add long_section_names,
reorder fields.
* libcoff.h: Regenerate.
binutils/
* objcopy.c (set_long_section_mode): Move earlier in file.
(copy_object): Call set_long_section_mode here, after setting
output format.
(copy_file): Don't call set_long_section_mode.
This occurs when attempting to read back a section from the output
file in _bfd_XX_bfd_copy_private_bfd_data_common. The copy of the
section failed size sanity checking, thus it won't be written.
* objcopy.c (copy_object): Return false if copy_section or
copy_relocations_in_section fails.
objcopy of archive, element containing an object with a fuzzed section
size far exceeding the element size. copy_section detects this, but
the temp file is laid out for the large section. It can take a long
time to write terabytes of sparse file, a waste of time when it will
be deleted.
* objcopy.c (copy_archive): Don't write element contents after
bad status result from copy_object.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This fixes a couple of places in display_debug_lines_decoded that were
off by one in checking DWARF5 .debug_line directory indices. It also
displays the DWARF5 entry 0 for the program current directory rather
than "." as is done for pre-DWARF5. I decided against displaying
DW_AT_comp_dir for pre-DWARF5 since I figure it is better for readelf
to minimally interpret debug info.
binutils/
PR 29948
* dwarf.c (display_debug_lines_decoded): Display the given
directory entry 0 for DWARF5. Properly check directory index
against number of entries in the table. Revert to using
unsigned int for n_directories and associated variables.
Correct warning messages.
gas/
* testsuite/gas/elf/dwarf-5-loc0.d: Update.
The Emacs 28 compiler warns about dwarf-mode.el:
Warning (comp): dwarf-mode.el:180:32: Warning: Unused lexical argument `ignore'
This is easily fixed by prepending "_" to the parameter's name.
binutils/ChangeLog
2022-12-19 Tom Tromey <tromey@adacore.com>
* dwarf-mode.el (dwarf-do-refresh): Avoid compiler warning.
PR 29914
* dwarf.c (fetch_indexed_value): Fail if the section is not big
enough to contain a header size field.
(display_debug_addr): Fail if the computed address size is too big
or too small.
* dwarf.c (struct Frame_Chunk): Make col_offset an int64_t.
Adjust all places allocating col_offset and col_type to use
the size of the array element rather than the size of a type.
(frame_display_row): Adjust printing of col_offset.
(display_debug_frames): Factor out multiplication by
code_factor and data_factor. Avoid signed overflow. Use
64-bit variables.
abfd->filename will be freed if bfd_close gets far enough to delete
the bfd. It's possible to have an error from fclose at this point.
* objcopy.c (copy_archive): Dup filename before closing bfd for
potential use in bfd_nonfatal_message.
Plus segvs if the C-library doesn't handle printf %s of NULL.
PR 29872
* dwarf.c (null_name): New function.
(process_debug_info): Use it here..
(display_debug_lines_raw): ..and here..
(display_debug_lines_decoded): ..and here. xcalloc directory_table.
Simplify xcalloc of file_table.
