This adds a new flag to the reloc howtos that can be used to
incrementally change targets over to simple bfd_install_relocation
that just installs the addend without any weird adjustments.
I've made a few other changes to bfd_install_relocation, removing dead
code and comments that are really only applicable to
bfd_perform_relocation.
There is also a reloc offset bounds check change. I've moved the
check to where data is accessed, as it seems reasonable to me to not
perform the check unless it is needed. There is precedence for this;
Relocations against absolute symbols already avoided the check.
I also tried always performing the reloc offset check, and ran into
testsuite failures due to _NONE and _ALIGN relocs at the end of
sections. These likely would be fixed if all such reloc howtos had
size set to zero, but I would rather not edit lots of files when it
involves checking that target code does not use the size.
* reloc.c (struct reloc_howto_struct): Add install_addend.
(HOWTO_INSTALL_ADDEND): Define.
(HOWTO): Init new field with HOWTO_INSTALL_ADDEND.
(bfd_install_relocation): Remove comments copied from
bfd_perform_relocation that aren't applicable here. Remove
code dealing with output_offset and output_section. Just set
relocation to addend if install_addend. Move reloc offset
bounds check to just before section data is accessed, avoiding
the check when data is not accessed.
* bfd-in2.h: Regenerate.
We already use C99's __func__ in places, use it more generally. This
patch doesn't change uses in the testsuite. I've also left one in
gold.h that is protected by GCC_VERSION < 4003. If any of the
remaining uses bothers anyone I invite patches.
bfd/
* bfd-in.h: Replace __FUNCTION__ with __func__.
* elf32-bfin.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfxx-sparc.c: Likewise.
* bfd-in2.h: Regenerate.
gas/
* config/tc-cris.c: Replace __FUNCTION__ with __func__.
* config/tc-m68hc11.c: Likewise.
* config/tc-msp430.c: Likewise.
gold/
* dwp.h: Replace __FUNCTION__ with __func__.
* gold.h: Likewise, except for use inside GCC_VERSION < 4003.
ld/
* emultempl/pe.em: Replace __FUNCTION__ with __func__.
* emultempl/pep.em: Likewise.
* pe-dll.c: Likewise.
Commit b1c95bc4dd73 resulted in
...bfd.texi:246: @include: could not find init.texi
which went unnoticed due to not building in a clean directory.
This fixes the problem by moving bfd_init earlier, giving it a
doc node, and stitching the nodes back together.
* bfd.c (bfd_init): Move earlier. Give it a doc inode.
Adjust other inodes to suit.
* doc/bfd.texi: Don't include init.texi. Adjust nodes to suit.
init.c contains just one function that doesn't do much. Move it to
bfd.c and give it something to do, initialising static state. So far
the only initialisation is for bfd.c static variables.
The idea behind reinitialising state is to see whether some set of
flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways
that can't occur in reality, feeding multiple testcases into the
internals of binutils. So one testcase may affect the result of the
next testcase.
* init.c: Delete file. Move bfd_init to..
* bfd.c (bfd_init): ..here. Init static variables.
* Makefile.am (BFD32_LIBS): Remove init.lo.
(BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c.
* doc/local.mk: Remove mention of init.texi and init.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This patch removes the bfd_malloc in default_indirect_link_order and
bfd_simple_get_relocated_section_contents, pushing the allocation down
to bfd_get_relocated_section_contents. The idea is to make use of the
allocation done with sanity checking in bfd_get_full_section_contents,
which is called by bfd_generic_get_relocated_section_contents.
Doing this exposed a bug in bfd_get_full_section_contents. With
relaxation it is possible that an input section rawsize is different
to the section size. In that case we want to use the larger of
rawsize (the on-disk size for input sections) and size.
* reloc.c (bfd_generic_get_relocated_section_contents),
* reloc16.c (bfd_coff_reloc16_get_relocated_section_contents),
* coff-alpha.c (alpha_ecoff_get_relocated_section_contents),
* coff-sh.c (sh_coff_get_relocated_section_contents),
* elf-m10200.c (mn10200_elf_get_relocated_section_contents),
* elf-m10300.c (mn10300_elf_get_relocated_section_contents),
* elf32-avr.c (elf32_avr_get_relocated_section_contents),
* elf32-cr16.c (elf32_cr16_get_relocated_section_contents),
* elf32-crx.c (elf32_crx_get_relocated_section_contents),
* elf32-h8300.c (elf32_h8_get_relocated_section_contents),
* elf32-nds32.c (nds32_elf_get_relocated_section_contents),
* elf32-sh.c (sh_elf_get_relocated_section_contents),
* elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents):
Handle NULL data buffer.
* bfd.c (bfd_get_section_alloc_size): New function.
* bfd-in2.h: Regenerate.
* compress.c (bfd_get_full_section_contents): Correct section
malloc size.
* linker.c (default_indirect_link_order): Don't malloc memory
here before calling bfd_get_relocated_section_contents.
* simple.c (bfd_simple_get_relocated_section_contents): Likewise.
Commit 5aa0f10c424e added a per_xvec_warn array to provide support for
warnings from elf_object_p (and a later patch for warnings from
pe_bfd_object_p) to be cached and then only printed if the target
matches. It was quite limited in the style of message supported, only
one message could be printed, and didn't really meet the stated aim of
only warning when a target matches: There are many other errors and
warnings that can be emitted by functions called from elf_object_p.
So this patch extends the error handler functions to support printing
to a string buffer, extends per_xvec_warn to support multiple errors/
warnings, and hooks this all into bfd_check_format_matches. If
bfd_check_format_matches succeeds then any errors/warnings are printed
for the matching target. If bfd_check_format_matches fails either due
to no match or to multiple matches and only one target vector produced
errors, then those errors are printed.
* bfd.c (MAX_ARGS): Define, use throughout.
(print_func): New typedef.
(_bfd_doprnt): Add new print param. Replace calls to fprintf
with print.
(PRINT_TYPE): Similarly.
(error_handler_fprintf): Renamed from error_handler_internal.
Use _bfd_get_error_program_name. Add fprintf arg. Move code
setting up args..
(_bfd_doprnt_scan): ..to here. Add ap param.
(struct buf_stream): New.
(err_sprintf): New function.
(error_handler_bfd): New static variable.
(error_handler_sprintf): New function.
(_bfd_set_error_handler_caching): New function.
(_bfd_get_error_program_name): New function.
* elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in
warning messages.
(elf_object_p): Likewise.
* format.c (print_warnmsg): New function.
(clear_warnmsg): Rewrite.
(null_error_handler): New function.
(bfd_check_format_matches): Ignore warnings from recursive calls
checking first element of an archive. Use caching error handler
otherwise. Print warnings on successful match, or when only one
target has emitted warnings/errors.
* peicode.h (pe_bfd_object_p): Use _bfd_error_handler in
warning messages.
* targets.c (per_xvec_warn): Change type of array elements.
(struct per_xvec_message): New.
(_bfd_per_xvec_warn): Rewrite.
* Makefile.am (LIBBFD_H_FILES): Add bfd.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
Tidies:
- Move stuff from bfd-in.h and libbfd.c to compress.c
- Delete COMPRESS_DEBUG from enum compressed_debug_section_type
- Move compress_debug field out of link_info to ld_config.
Fixes:
- Correct test in bfd_convert_section_setup to use obfd flags,
not ibfd.
- Apply bfd_applicable_file_flags to compression bfd flags added
by gas and ld to the output bfd.
bfd/
* bfd-in.h (enum compressed_debug_section_type),
(struct compressed_type_tuple),
(bfd_get_compression_algorithm),
(bfd_get_compression_algorithm_name),
* libbfd.c (compressed_debug_section_names),
(bfd_get_compression_algorithm),
(bfd_get_compression_algorithm_name): Move..
* compress.c: ..to here, deleting COMPRESS_DEBUG from
enum compressed_debug_section_type.
(bfd_convert_section_setup): Test obfd flags not ibfd for
compression flags.
* elf.c (elf_fake_sections): Replace link_info->compress_debug
test with abfd->flags test.
* bfd-in2.h: Regenerate.
binutils/
* objcopy.c (copy_file): Tidy setting of bfd compress flags.
Expand comment.
gas/
* write.c (compress_debug): Test bfd compress flags rather than
flag_compress_debug.
(write_object_file): Apply bfd_applicable_file_flags to compress
debug flags added to output bfd.
include/
* bfdlink.h (struct bfd_link_info): Delete compress_debug.
ld/
* ld.h (ld_config_type): Add compress_debug.
* emultempl/elf.em: Replace references to link_info.compress_debug
with config.compress_debug.
* lexsup.c (elf_static_list_options): Likewise.
* ldmain.c (main): Likewise. Apply bfd_applicable_file_flags
to compress debug flags added to output bfd.
This flag also isn't needed, except for some sanity checks which we
can omit.
* elf.c (elf_fake_sections): Don't set SEC_ELF_COMPRESS for
compressed debug sections, just leave sh_name as -1.
(assign_file_positions_for_non_load_sections),
(assign_file_positions_except_relocs): Decide whether a section
needs compressing and thus should not have its file offset set
by looking at sh_name.
(_bfd_elf_assign_file_positions_for_non_load): Similarly decide
which sections need compressing.
* elflink.c (bfd_elf_final_link): Don't test SEC_ELF_COMPRESS.
* merge.c (_bfd_write_merged_section): Likewise.
* section.c (SEC_ELF_COMPRESS): Don't define.
(SEC_ELF_PURECODE): Renumber.
* bfd-in2.h: Regenerate.
SEC_ELF_RENAME is a flag used to effect section name changes when
compressing/decompressing zlib-gnu debug sections. This can be
accomplished more directly in one of the objcopy specific bfd
functions. Renaming for ld input is simplified too. Ld input object
files always have BFD_DECOMPRESS set.
bfd/
* compress.c (bfd_convert_section_size): Rename to..
(bfd_convert_section_setup): ..this. Handle objcopy renaming
of compressed/decompressed debug sections.
* elf.c (_bfd_elf_make_section_from_shdr): Only rename zdebug
input for linker.
(elf_fake_sections): Don't handle renaming of debug sections for
objcopy here.
* section.c (SEC_ELF_RENAME): Delete.
* bfd-in2.h: Regenerate.
binutils/
* objcopy.c (setup_section): Call bfd_convert_section_setup.
Don't call bfd_convert_section_size.
Define an enum instead of using ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD
in bfd and binutils, and move some functions from bfd.c to compress.c.
When looking at the COFF/PE debug compression support, I wondered
about extending it to support zstd. I likely won't do that, but
the compression header ch_type field isn't just ELF specific if these
headers are to be used in COFF/PE too.
bfd/
* bfd.c (bfd_update_compression_header),
(bfd_check_compression_header, bfd_get_compression_header_size),
(bfd_convert_section_size, bfd_convert_section_contents): Move to..
* compress.c: ..here.
(enum compression_type): New. Use it throughout file.
* elf.c (_bfd_elf_make_section_from_shdr): Replace uses of
ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with ch_compress_zlib and
ch_compress_zstd.
* bfd-in2.h: Regenerate.
binutils/
* readelf.c (process_section_headers, dump_section_as_strings),
(dump_section_as_bytes, load_specific_debug_section): Replace
uses of ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with
ch_compress_zlib and ch_compress_zstd.
Move a couple of elf.c functions to compress.c.
* compress.c (bfd_debug_name_to_zdebug): New inline function.
(bfd_zdebug_name_to_debug): Likewise.
* elf.c (convert_debug_to_zdebug, convert_zdebug_to_debug): Delete.
(_bfd_elf_make_section_from_shdr, elf_fake_sections),
(_bfd_elf_assign_file_positions_for_non_load): Adjust to suit.
* coffgen.c (make_a_section_from_file): Use new inlines here.
The linker merges all the input .sframe sections. When merging, the
linker verifies that all the input .sframe sections have the same
abi/arch.
The linker uses libsframe library to perform key actions on the
.sframe sections - decode, read, and create output data. This
implies buildsystem changes to make and install libsframe before
libbfd.
The linker places the output .sframe section in a new segment of its
own: PT_GNU_SFRAME. A new segment is not added, however, if the
generated .sframe section is empty.
When a section is discarded from the final link, the corresponding
entries in the .sframe section for those functions are also deleted.
The linker sorts the SFrame FDEs on start address by default and sets
the SFRAME_F_FDE_SORTED flag in the .sframe section.
This patch also adds support for generation of SFrame unwind
information for the .plt* sections on x86_64. SFrame unwind info is
generated for IBT enabled PLT, lazy/non-lazy PLT.
The existing linker option --no-ld-generated-unwind-info has been
adapted to include the control of whether .sframe unwind information
will be generated for the linker generated sections like PLT.
Changes to the linker script have been made as necessary.
ChangeLog:
* Makefile.def: Add install dependency on libsframe for libbfd.
* Makefile.in: Regenerated.
* bfd/Makefile.am: Add elf-sframe.c
* bfd/Makefile.in: Regenerated.
* bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
* bfd/configure: Regenerate.
* bfd/configure.ac: Add elf-sframe.lo.
* bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
(struct sframe_dec_info): Likewise.
(struct sframe_enc_info): Likewise.
(struct elf_link_hash_table): New member for encoded .sframe
object.
(struct output_elf_obj_tdata): New member.
(elf_sframe): New access macro.
(_bfd_elf_set_section_sframe): New declaration.
* bfd/elf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
(bfd_section_from_phdr): Likewise.
(get_program_header_size): Likewise.
(_bfd_elf_map_sections_to_segments): Likewise.
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
contents to the .sframe sections or .plt* entries.
* bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
SEC_INFO_TYPE_SFRAME.
(_bfd_elf_default_action_discarded): Handle .sframe section.
(elf_link_input_bfd): Merge .sframe section.
(bfd_elf_final_link): Write the output .sframe section.
(bfd_elf_discard_info): Handle discarding .sframe section.
* bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
.sframe section for .plt and .plt.sec.
(_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
.plt* sections.
* bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
definition.
(SFRAME_PLT0_MAX_NUM_FRES): Likewise.
(SFRAME_PLTN_MAX_NUM_FRES): Likewise.
(struct elf_x86_sframe_plt): New structure.
(struct elf_x86_link_hash_table): New member.
(struct elf_x86_init_table): New members for .sframe
creation.
* bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
* binutils/readelf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
* ld/ld.texi: Update documentation for
--no-ld-generated-unwind-info.
* ld/scripttempl/elf.sc: Support .sframe sections.
* ld/Makefile.am (TESTSFRAMELIB): Use it.
(check-DEJAGNU): Likewise.
* ld/Makefile.in: Regenerated.
* ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
* ld/configure: Regenerated.
* bfd/elf-sframe.c: New file.
include/ChangeLog:
* elf/common.h (PT_GNU_SFRAME): New definition.
* elf/internal.h (struct elf_segment_map): Handle new segment
type PT_GNU_SFRAME.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
sframe-simple-1.
* ld/testsuite/ld-aarch64/sframe-bar.s: New file.
* ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
* ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-sframe/sframe-empty.d: New test.
* ld/testsuite/ld-sframe/sframe-empty.s: New file.
* ld/testsuite/ld-sframe/sframe.exp: New testsuite.
* ld/testsuite/ld-x86-64/sframe-bar.s: New file.
* ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
sframe-simple-1, sframe-plt-1.
* ld/testsuite/lib/ld-lib.exp: Add new proc to check if
assembler supports SFrame section.
* ld/testsuite/ld-sframe/discard.d: New file.
* ld/testsuite/ld-sframe/discard.ld: Likewise.
* ld/testsuite/ld-sframe/discard.s: Likewise.
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
So we had a zlib-gabi .debug_info section that increased in size with
zstd, so much so that it was better to leave the section
uncompressed. Things went horribly wrong when the section was read
again later. The section was read again off disk using the
uncompressed size. So you get the zlib section again with some
garbage at the end. Fix that particular problem by setting the
section flag SEC_IN_MEMORY. Any future read will get sec->contents.
Also, if the section is to be left uncompressed, the input
SHF_COMPRESSED flag needs to be reset otherwise objcopy will copy it
to output.
Finally, bfd_convert_section_contents needed a small update to handle
zstd compressed sections, and I've deleted bfd_cache_section_contents.
* bfd.c (bfd_convert_section_contents): Handle zstd.
* compress.c (bfd_compress_section_contents): When section
contents are uncompressed set SEC_IN_MEMORY flag,
compress_status to COMRESS_SECTION_NONE, and clear
SHF_COMPRESSED. Set SEC_IN_MEMORY for compressed contents.
(bfd_get_full_section_contents): Don't check section size
against file size when SEC_IN_MEMORY.
(bfd_cache_section_contents): Delete function.
* elf32-arm.c (elf32_arm_get_synthetic_symtab): Expand
bfd_cache_section_contents here.
* bfd-in2.h: Regenerate.
bfd/ChangeLog:
* bfd-in.h (bfd_hash_set_default_size): Add COMPRESS_UNKNOWN
enum value.
(struct compressed_type_tuple): New.
* bfd-in2.h (bfd_hash_set_default_size): Regenerate.
(struct compressed_type_tuple): Likewise.
* libbfd.c (ARRAY_SIZE): New macro.
(bfd_get_compression_algorithm): New function.
(bfd_get_compression_algorithm_name): Likewise.
gas/ChangeLog:
* as.c: Do not special-case, use the new functions.
ld/ChangeLog:
* emultempl/elf.em: Do not special-case, use the new functions.
* lexsup.c (elf_static_list_options): Likewise.
Commit 2cac01e3ffff lacked support for objcopy changing compression
style. Add that support, which meant a rewrite of
bfd_compress_section_contents. In the process I've fixed some memory
leaks.
* compress.c (bfd_is_section_compressed_info): Rename from
bfd_is_section_compressed_with_header and add ch_type param
to return compression header ch_type field.
Update all callers.
(decompress_section_contents): Remove buffer and size params.
Rewrite. Update callers.
(bfd_init_section_compress_status): Free contents on failure.
(bfd_compress_section): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Support objcopy
changing between any of the three compression schemes. Report
"unable to compress/decompress" rather than "unable to
initialize compress/decompress status" on compress/decompress
failures.
* bfd-in2.h: Regenerate.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with
the addition of a parameter for specifying the filename of a supplementary
debug file such as one referenced by .gnu_debugaltlink or .debug_sup.
This patch focuses on implementing bfd_find_nearest_line_with_alt
support for ELF/DWARF2 .gnu_debugaltlink. For other targets this
function simply sets the invalid_operation bfd_error.
Don't overload bfd_reloc_outofrange with what is really a domain error
(target at odd address), or an overflow.
PR 11290
* reloc.c (bfd_reloc_other): Correct comment.
* elf32-avr.c (avr_final_link_relocate): Return bfd_reloc_other
for unaligned reloc target values. Return bfd_reloc_overflow
when stubs are too far away and when R_AVR_LDS_STS_16,
R_AVR_PORT6, or R_AVR_PORT5 overflow.
(elf32_avr_relocate_section): Report more descriptive relocation
errors.
* bfd-in2.h: Regenerate.
bfd_set_section_alignment currently always returns true. This patch
changes it to return false on silly alignment values, avoiding yet
another way to trigger ubsan errors like coffcode.h:3192:12: runtime
error: shift exponent 299 is too large for 32-bit type 'int'. We'll
catch that one in objcopy.c:setup_sections. However, setup_sections
gives up on other setup operations that are necessary even after an
error of some sort. Change that to keep going, which might change the
error message but that shouldn't matter in the least.
bfd/
* section.c (bfd_set_section_alignment): Return false and
don't set alignment_power for stupidly large alignments.
* bfd-in2.h: Regenerate.
* coffcode.h (coff_compute_section_file_positions): Don't use
an int constant when calculating alignment.
binutils/
* objcopy.c (setup_section): Keep on going after hitting
non-fatal errors.
PR 29389
bfd * bfd.c (BFD_CLOSED_BY_CACHE): New bfd flag.
* cache.c (bfd_cache_delete): Set BFD_CLOSED_BY_DELETE on the
closed bfd.
(bfd_cache_lookup_worker): Clear BFD_CLOSED_BY_DELETE on the newly
reopened bfd.
* opncls.c (bfd_set_filename): Refuse to change the name of a bfd
that has been closed by bfd_cache_delete. Mark changed bfds as
uncacheable.
* bfd-in2.h: Regenerate.
ld * ldlang.h (lang_input_statement_struct): Add sort_key field.
* emultempl/pe.em (after_open): If multiple import libraries refer
to the same bfd, store their names in the sort_key field.
* emultempl/pep.em (after_open): Likewise.
* ldlang.c (sort_filename): New function. Returns the filename to
be used when sorting input files.
(wild_sort): Use the sort_filename function.
These two macros print either a 16 digit hex number or an 8 digit
hex number. Unfortunately they depend on both target and host, which
means that the output for 32-bit targets may be either 8 or 16 hex
digits.
Replace them in most cases with code that prints a bfd_vma using
PRIx64. In some cases, deliberately lose the leading zeros.
This change some output, notably in base/offset fields of m68k
disassembly which I think looks better that way, and in error
messages. I've kept leading zeros in symbol dumps (objdump -t)
and in PE header dumps.
bfd/
* bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
* bfd-in2.h: Regenerate.
* bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
(bfd_fprintf_vma): Don't use fprintf_vma.
* coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(xcoff_ppc_relocate_section): Likewise.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* mmo.c (mmo_write_symbols_and_terminator): Likewise.
* srec.c (srec_write_symbols): Likewise.
* elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
* pei-x86_64.c (pex64_dump_xdata): Likewise.
(pex64_bfd_print_pdata_section): Likewise.
* som.c (som_print_symbol): Likewise.
* ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
opcodes/
* dis-buf.c (perror_memory, generic_print_address): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* i386-dis.c (print_operand_value, print_displacement): Likewise.
* m68k-dis.c (print_base, print_indexed): Likewise.
* ns32k-dis.c (print_insn_arg): Likewise.
* ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
(opcode_fprintf_vma): Delete.
(print_main_table): Use PRIx64 to print opcode.
binutils/
* od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
* objcopy.c (copy_object): Don't use sprintf_vma. Instead use
PRIx64 to print bfd_vma values.
(copy_main): Likewise.
* readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
(dynamic_section_mips_val): Likewise.
(print_vma): Don't use printf_vma. Instead use PRIx64 to print
bfd_vma values.
(dump_ia64_vms_dynamic_fixups): Likewise.
(process_version_sections): Likewise.
* rddbg.c (stab_context): Likewise.
gas/
* config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(md_assemble): Likewise.
* config/tc-mips.c (load_register, macro): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(print_dependency): Likewise.
* listing.c (list_symbol_table): Use bfd_sprintf_vma.
* symbols.c (print_symbol_value_1): Use %p to print pointers.
(print_binary): Likewise.
(print_expr_1): Use PRIx64 to print bfd_vma values.
* write.c (print_fixup): Use %p to print pointers. Don't use
fprintf_vma.
* testsuite/gas/all/overflow.l: Update expected output.
* testsuite/gas/m68k/mcf-mov3q.d: Likewise.
* testsuite/gas/m68k/operands.d: Likewise.
* testsuite/gas/s12z/truncated.d: Likewise.
ld/
* deffilep.y (def_file_print): Don't use fprintf_vma. Instead
use PRIx64 to print bfd_vma values.
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
* ldlang.c (lang_map): Use %V to print region origin.
(lang_one_common): Don't use sprintf_vma.
* ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
* pe-dll.c (pe_dll_generate_def_file): Likewise.
gdb/
* remote.c (remote_target::trace_set_readonly_regions): Replace
uses of sprintf_vma with bfd_sprintf_vma.
There is a problem with my commit 0e3c1eebb2, which replaced
bfd_uint64_t with uint64_t: Some hosts typedef int64_t to long long
even when long is the same size as long long. That confuses the code
choosing one of "l", "ll", or "I64" for BFD_VMA_FMT, and results in
warnings.
Write a direct configure test for the printf int64_t style instead.
This removes the last use of BFD_HOST_64BIT_LONG, so delete that.
Note that the changes to configure.com are pure guesswork.
PR 29348
* bfd-in.h (BFD_HOST_64BIT_LONG): Don't define.
(BFD_VMA_FMT): Define using BFD_INT64_FMT when 64-bit.
(bfd_vma, bfd_signed_vma): Move comments to 64-bit typedefs.
* configure.ac (BFD_HOST_64BIT_LONG): Delete.
(BFD_INT64_FMT): New config test.
* configure.com: Update similarly.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
Some R_LARCH_64 in section .eh_frame will to generate
R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL
from R_LARCH_64 in setction .eh_frame and not generate
dynamic relocation for R_LARCH_32_PCREL.
Add New relocate type R_LARCH_32_PCREL for .eh_frame.
include/elf/
loongarch.h
bfd/
bfd/bfd-in2.h
libbfd.h
reloc.c
elfxx-loongarch.c
elfnn-loongarch.c
gas/config/
tc-loongarch.c
binutils/
readelf.c
ld/testsuite/ld-elf/
eh5.d
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation,
since R_MIPS_16 specifies a 16-bit field in a 32-bit word.
BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data
directives, expects fixups to operate on the whole of a 16-bit word.
This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd
reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in
md_apply_fix for cases where the fixup can be applied at assembly
time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object
file relocation, and thus .half, .hword, .short and .dc.w must be
resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this
patch since it isn't used.
PR 3243
PR 26542
* reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16.
* elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16.
* elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16.
* elfn32-mips.c (mips_reloc_map): Likewise.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16.
(macro_build): Likewise.
(mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16.
(md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done.
ld/
* testsuite/ld-mips-elf/reloc-local-overflow.d,
* testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite.
I expect the encoded reloc.size field originally came from aout
r_length ecoding, but somehow went wrong for 64-bit relocs (which
should have been encoded as 3). Toss all that out, just use a byte
size instead. The changes outside of reloc.c in this patch should
make the code independent of how reloc.size is encoded.
* reloc.c (struct reloc_howto_struct): Increase size field by
one bit. Comment.
(HOWTO_RSIZE): Don't encode size.
(bfd_get_reloc_size): Adjust, and make it an inline function.
(read_reloc, write_reloc): Adjust.
* bfd-in2.h: Regenerate.
* aout-ns32k.c: Include libbfd.h.
(put_reloc): Don't use howto->size directly. Calculate r_length
using bfd_log2 and bfd_get_reloc_size.
* aoutx.h (swap_std_reloc_out): Likewise.
(aout_link_reloc_link_order): Likewise.
* i386lynx.c (swap_std_reloc_out
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out
* pdp11.c (aout_link_reloc_link_order
* coff-arm.c (coff_arm_reloc): Don't use howto->size directly,
use bfd_get_reloc_size instead and adjust switch cases.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Likewise.
* cpu-ns32k.c (do_ns32k_reloc): Likewise.
* elf32-arc.c (arc_do_relocation): Likewise.
* elf32-arm.c (elf32_arm_final_link_relocate): Likewise.
* elf32-bfin.c (bfin_bfd_reloc): Likewise.
* elf32-cr16.c (cr16_elf_final_link_relocate): Likewise.
* elf32-cris.c (cris_elf_pcrel_reloc): Likewise.
* elf32-crx.c (crx_elf_final_link_relocate): Likewise.
* elf32-csky.c (csky_elf_relocate_section): Likewise.
* elf32-d10v.c (extract_rel_addend, insert_rel_addend): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-m32r.c (m32r_elf_generic_reloc): Likewise.
* elf32-nds32.c (nds32_elf_generic_reloc): Likewise.
* syms.c (_bfd_stab_section_find_nearest_line): Likewise.
* coff-rs6000.c (xcoff_ppc_relocate_section): Adjust howto.size.
* coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise.
bfd_hostptr_t is defined as a type large enough to hold either a long
or a pointer. It mostly appears in the coff backend code in casts.
include/coff/internal.h struct internal_syment and union
internal_auxent have the only uses in data structures, where
comparison with include/coff/external.h and other code reveals that
the type only needs to be large enough for a 32-bit integer or a
pointer. That should mean replacing with uintptr_t is OK.
Requiring C99 means that uses of bfd_uint64_t can be replaced with
uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and
BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_*
and tidies a few places that print 64-bit values.
For better packing on 64-bit hosts.
* section.c (struct bfd_section): Move next and prev field earlier.
Move alignment_power later.
(BFD_FAKE_SECTION): Adjust to suit.
* bfd-in2.h: Regenerate.
bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
Target specific data shouldn't be put in struct bfd_section.
* section.c (struct bfd_section): Delete relax and relax_count.
(BFD_FAKE_SECTION): Adjust to suit.
(struct relax_table): Move to..
* elf32-microblaze.c (struct relax_table): ..here.
(struct _microblaze_elf_section_data): New.
(microblaze_elf_section_data): Define.
(microblaze_elf_new_section_hook): New function.
(bfd_elf32_new_section_hook): Define.
(calc_fixup): Return a size_t. Adjust to suit new location of
relax and relax_count.
(microblaze_elf_relax_section): Adjust to suit new location of
relax and relax_count. Make some variables size_t.
* bfd-in2.h: Regenerate.
Add support for the AMDGCN architecture to BFD.
This is the bare minimum to get
$ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
$ make all-binutils
working later in this series.
The specific AMDGCN models added here are a bit arbitrary, based on
what we intend to initially support in GDB. This list will need to be
updated in the future anyway. The complete up-to-date list of existing
AMDGPU models can be found here:
https://llvm.org/docs/AMDGPUUsage.html#processors
The ELF format for this architecture is documented here:
https://llvm.org/docs/AMDGPUUsage.html#elf-code-object
The flags for the "HSA" OS ABI are properly versioned and documented on
that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
nor versioned. Taking a peek at the LLVM source code, we see that they
encode their flags the same way as HSA v3. For example, for PAL:
c8b614cd74/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp (L601)
So at least, we know that all AMDGPU objects (of which AMDGCN objects
are a subset of) at the time of writing encode the specific GPU model in
the EF_AMDGPU_MACH field of e_flags.
bfd/ChangeLog:
* Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES):
Add cpu-amdgcn.c.
(BFD64_BACKENDS): Add elf64-amdgcn.lo.
(BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c.
* Makefile.in: Re-generate.
* cpu-amdgcn.c: New.
* elf64-amdgcn.c: New.
* archures.c (bfd_architecture): Add bfd_arch_amdgcn and related
mach defines.
(bfd_amdgcn_arch): New.
(bfd_archures_list): Add bfd_amdgcn_arch.
* bfd-in2.h: Re-generate.
* config.bfd: Handle amdgcn* target.
* configure.ac: Handle amdgcn_elf64_le_vec.
* configure: Re-generate.
* elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA.
* targets.c (amdgcn_elf64_le_vec): New.
(_bfd_target_vector): Add amdgcn_elf64_le_vec.
include/ChangeLog:
* elf/amdgpu.h: New.
* elf/common.h (ELFOSABI_AMDGPU_HSA): Add.
Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
"DO NOT EDIT!" says the comment at the top of bfd-in2.h. Move the new
type field where it belongs.
PR ld/28841
* section.c (struct bfd_section): Add type. Formatting.
(BFD_FAKE_SECTION): Formatting.
* bfd-in2.h: Regenerate.
Now that ld properly aligns the end of the relro segment, the hack to
make relro work on powerpc can disappear.
bfd/
* bfd.c (bfd_emul_get_commonpagesize): Remove relro param.
Don't return bed->relropagesize.
* elf-bfd.h (struct elf_backend_data): Remove relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Remove.
* elf32-ppc.c (ELF_RELROPAGESIZE): Don't define.
* elf64-ppc.c: Likewise.
* bfd-in2.h: Regenerate.
ld/
* ldemul.c (after_parse_default): Adjust
bfd_emul_get_commonpagesize call.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
No need to use anything fancy, plain inline works just as well.
* bfd-in.h (INLINE): Don't define.
* bfd-in2.h: Regenerate.
* aoutx.h: Replace use of INLINE with inline.
* elf-eh-frame.c: Likewise.
* elf32-score7.c: Likewise.
* elfxx-mips.c: Likewise.
* ihex.c: Likewise.
* mach-o.c: Likewise.
* mmo.c: Likewise.
