This patch adds a test case to test the performance of GDB doing
disassembly.
gdb/testsuite/
2013-11-28 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (with_gdb_prompt): New proc.
* gdb.perf/disassemble.exp: New.
* gdb.perf/disassemble.py: New.
Avoid false positives if the search pattern "lose" is found in path
descriptions in comments generated by the preprocessor.
See <https://sourceware.org/bugzilla/show_bug.cgi?id=16152>.
gdb/
2013-11-27 Steffen Sledz <sledz@dresearch-fe.de>
* configure.ac: Tighten Cygwin detection check.
* configure: Rebuild.
value_of_register_lazy uses the type of REGNUM in FRAME, but given
multi-arch, the arch of FRAME might be different from the previous
frame's arch, and therefore the type of register REGNUM should be
retrieved from the unwound arch. This used to be correct before the
previous change.
Tested on x86_64 Fedora 17.
gdb/
2013-11-27 Pedro Alves <palves@redhat.com>
* frame-unwind.c (frame_unwind_got_optimized): Use the type of the
register in the previous frame's arch.
"set debug frame 1" is printing "<optimized out>" for not saved
registers. That's because the unwinders are returning optimized out
not_lval values instead of optimized out lval_register values. "<not
saved>" is how val_print_optimized_out prints lval_register values.
...
- { frame_unwind_register_value (frame=0,regnum=7(rsp),...) -> <optimized out> }
+ { frame_unwind_register_value (frame=0,regnum=7(rsp),...) -> <not saved> }
...
Tested on x86_64 Fedora 17.
2013-11-27 Pedro Alves <palves@redhat.com>
* frame-unwind.c (frame_unwind_got_optimized): Return
an lval_register value instead of a not_lval value.
bfd/
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pei-x86_64.c (pex_regs): Make it const. Add comments.
(pex64_get_runtime_function): Do not split UnwindData.
(pex64_get_unwind_info): Extract the chain and the handler.
(pex64_xdata_print_uwd_codes): Rewritten: do not reverse print
the opcode, handle version 2, add consistency check, make the
code host neutral.
(pex64_dump_xdata): Change arguments to pass the section and its
content. Handle version 2, change output.
(pex64_bfd_print_pdata): Add comments, load section for xdata.
Avoid duplicate outputs.
include/coff
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pe.h (struct pex64_runtime_function): Remove isChained.
(UWOP_SAVE_XMM): Add comment.
(struct pex64_unwind_info): Remove extra fields.
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* binutils-all/objcopy.exp: Consider mips-mti-elf the same as
mips-sde-elf
* binutils-all/readelf.exp: Likewise
gas/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* gas/mips/mips.exp: Consider mips-mti-elf the same as mips-sde-elf
ld/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/mips-elf.exp: Consider mips-mti-elf the same as
mips-sde-elf
libiberty/
PR other/59195
* cp-demangle.c (struct d_info_checkpoint): New struct.
(struct d_print_info): Add current_template field.
(d_operator_name): Set flag when processing a conversion
operator.
(cplus_demangle_type): When processing <template-args> for
a conversion operator, backtrack if necessary.
(d_expression_1): Renamed from d_expression.
(d_expression): New wrapper around d_expression_1.
(d_checkpoint): New function.
(d_backtrack): New function.
(d_print_init): Initialize current_template.
(d_print_comp): Set current_template.
(d_print_cast): Put current_template in scope for
printing conversion operator name.
(cplus_demangle_init_info): Initialize is_expression and
is_conversion.
* cp-demangle.h (struct d_info): Add is_expression and
is_conversion fields.
* testsuite/demangle-expected: New test cases.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@205292 138bc75d-0d04-0410-961f-82ee72b054a4
If a value is entirely optimized out, then there's nothing for
value_fetch_lazy to fetch. Sequences like:
if (value_lazy (retval))
value_fetch_lazy (retval);
End up allocating the value contents buffer, wasting memory, for no
use.
gdb/ChangeLog
2013-11-26 Andrew Burgess <aburgess@broadcom.com>
* value.c (allocate_optimized_out_value): Mark value as non-lazy.
The code for handling GOT references to ifunc symbols in static links
was missing.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Handle STT_GNU_IFUNC symbols correctly in static links.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-22.
* ld-aarch64/ifunc-22.d: New file.
* ld-aarch64/ifunc-22.s: Likewise.
The .got.plt header size was not being correctly taken into account
when calculating the offset for relocations against ifunc symbols.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Ensure
PLT_INDEX is calculated using correct header size.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-21 test.
* ld-aarch64/ifunc-21.d: New file.
* ld-aarch64/ifunc-21.s: Likewise.
This reverts da2b2fdf57a96f7a5b6b153e94afb747e212b17f and some
follow-up patches. They were incorrect.
2013-11-26 Tom Tromey <tromey@redhat.com>
* dwarf2-frame.c (dwarf2_frame_cache): Revert patch from
2013-11-22.
2013-11-26 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/dw2-unspecified-ret-addr.S: Remove.
* gdb.dwarf2/dw2-unspecified-ret-addr.c: Remove.
* gdb.dwarf2/dw2-unspecified-ret-addr.exp: Remove.
The MPX patch has broken the I386_XSTATE_SIZE macro. For AVX machines,
it ends up returning I386_XSTATE_SSE_SIZE. Where it first reads
I386_XSTATE_AVX_SIZE, it should have read I386_XSTATE_AVX:
#define I386_XSTATE_SIZE(XCR0) \
(((XCR0) & I386_XSTATE_BNDCFG) != 0 ? I386_XSTATE_BNDCFG_SIZE \
: (((XCR0) & I386_XSTATE_BNDREGS) != 0 ? I386_XSTATE_BNDCFG_SIZE \
- : (((XCR0) & I386_XSTATE_AVX_SIZE) != 0 ? I386_XSTATE_AVX_SIZE \
+ : (((XCR0) & I386_XSTATE_AVX) != 0 ? I386_XSTATE_AVX_SIZE \
: I386_XSTATE_SSE_SIZE)))
The patch goes a step further and improves readability of the macro,
by adding a couple other auxiliary macros.
2013-11-26 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-xstate.h (I386_XSTATE_MPX): New Macro.
(I386_XSTATE_MPX_MASK): Makes use of I386_XSTATE_MPX.
(HAS_MPX): New macro.
(HAS_AVX): New macro.
(I386_XSTATE_SIZE): Uses HAS_MPX and HAS_AVX.
This patch teaches "disassembly" use code cache mechanism to read
target code.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* disasm.c (dis_asm_read_memory): Call target_read_code
instead of target_read_memory.
Similar to stack cache, in this patch, we add
TARGET_OBJECT_CODE_MEMORY to read code from target and add a new
option "set code-cache on|off" to optimize code accesses by
using the target memory cache.
In V4:
- Remove "without affecting correctness" from NEWS and doc.
- Replace "ON" with "on" in doc.
- "access" -> "accesses".
In V3:
- Rename functions and variables.
- Update command help, doc and NEWS entry.
- Invalidate cache on option transitions, to align with
the behaviour of "stack-cache". Since cache invalidation is
transparent to users, users don't know option "stack-cache"
transitions cause code cache invalidation.
V2 was reviewed by Doug. There are some changes in V3, so I post it
here.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* NEWS: Add note on new "set code-cache" option.
* target-dcache.c (code_cache_enabled_1): New variable.
(code_cache_enabled): New variable.
(show_code_cache, set_code_cache): New function.
(code_cache_enabled_p): New function.
(_initialize_target_dcache): Register command.
* target-dcache.h (code_cache_enabled_p): Declare.
* target.c (memory_xfer_partial_1):Handle
TARGET_OBJECT_CODE_MEMORY and code_cache_enabled.
(target_read_code): New function.
* target.h (enum target_object) <TARGET_OBJECT_CODE_MEMORY>:
New.
(target_read_code): Declare.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Remote Data): Document new
"set/show stack-cache" option.
Hi,
This patch does some renamings on "stack-cache" related functions and
variables.
In the review to "code cache" series v2, we have some discussions on the
name of predicate function 'stack_cache_enabled', and have some options,
1 keep it unchanged, as it is already a predicate clearly,
2 rename it to stack_cache_enabled_p,
3 rename it to enable_stack_cache_p,
I choose #2, because 'stack_cache_enabled' is a predicate, but
it's better to add "_p" suffix to stress this. There are some other
similar patterns used in GDB source, such as unop_user_defined_p
and agent_loaded_p.
Then, I have to rename variable stack_cache_enabled_p to something
else. The option is "stack-cache", so I'd like to name the variable
associated with this command as "stack_cache". Similarly, the commands
associated with this command should be renamed to "set_stack_cache"
and "show_stack_cache" respectively.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* target-dcache.c (stack_cache_enabled_p_1): Rename to ...
(stack_cache_enabled_1): ... this. New variable.
(stack_cache_enabled_p): Rename to ...
(stack_cache_enabled): ... this. New variable.
(set_stack_cache_enabled_p): Rename to ...
(set_stack_cache): ... this. Update caller.
(show_stack_cache_enabled_p): Rename to ...
(show_stack_cache): ... this. Update caller.
(stack_cache_enabled): Rename to ...
(stack_cache_enabled_p): ... this. Update caller.
(_initialize_target_dcache): Replace "data cache" with
"target memory cache".
* target-dcache.h (stack_cache_enabled): Remove declaration.
(stack_cache_enabled_p): Add declaration.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Target Data): Replace "ON" with "on".
(Maintenance Commands): Replace "ON" and "OFF" with "on" and
"off" respectively.
* gdb.python/py-value.exp (test_lazy_strings): Tweak test names.
(test_subscript_regression): Ditto.
(top level): Run test_subscript_regression for c++ with "c++" prefix.
* cli/cli-script.c (multi_line_command_p): New function.
(recurse_read_control_structure, read_command_lines_1): Call it.
(execute_control_command): Consistently have a blank line between
each case.
Hi,
When using command -var-list-children, "displayhint" appears in the result of
each child, shown as the following output.
-var-list-children ss1 ^M
^done,numchild="2",displayhint="pp_ss",children=[child={name="ss1.a",exp="a",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"},child={name="ss1.b",exp="b",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"}],has_more="0"
Current doc on command -var-list-children doesn't reflect this. This
patch is to fix it.
gdb/doc:
2013-11-23 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Add the description
of "displayhint" to the table about child results.
PR gdb/16196:
* valprint.c (read_string): Set new variable fetchlen based on
fetchlimit and size. Use it in call to partial_memory_read.
Update comment.
PR gdb/16196:
* valprint.c (read_string): Set new variable fetchlen based on
fetchlimit and size. Use it in call to partial_memory_read.
Update comment.
Pedro asked me to add a comment to dw2-bad-cfi.S explaining the nature
of the badness.
I'm checking this in.
2013-11-22 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/dw2-bad-cfi.S: Update comment.
