mirror of
https://github.com/espressif/binutils-gdb.git
synced 2025-05-20 16:56:29 +08:00
115 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| a391a7a8c5 |
sme2: Core file support for ZT register set
This patch adds support for ZT register dumps/reads for core files. The ZT register is available when the SME2 feature is advertised as available by the Linux Kernel. Unlike the enablement for SME1 and the ZA register, support for SME2 is rather simple given the fixed size of the ZT0 register. Validated on the Fast Models. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| 189e5663eb |
sme2: signal frame support
Teach gdb about the ZT state on signal frames and how to restore the contents of the registers. There is a new ZT_MAGIC context that the Linux Kernel uses to communicate the ZT register state to gdb. As mentioned before, the ZT state should only be available when the ZA state is available. Validated under Fast Models. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| 69bfb2b6d0 |
sme: Core file support for Linux
This patch enables dumping SME state via gdb's gcore command and also enables gdb to read SME state from a core file generated by the Linux Kernel. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| b93d537fba |
corefile/bug: Add hook to control the use of target description notes from corefiles
Due to the nature of the AArch64 SVE/SME extensions in GDB, each thread can potentially have distinct target descriptions/gdbarches. When loading a gcore-generated core file, at the moment GDB gives priority to the target description dumped to NT_GDB_TDESC. Though technically correct for most targets, it doesn't work correctly for AArch64 with SVE or SME support. The correct approach for AArch64/Linux is to either have per-thread target description notes in the corefiles or to rely on the gdbarch_core_read_description hook, so it can figure out the proper target description for a given thread based on the various available register notes. The former, although more correct, doesn't address the case of existing gdb's that only output a single target description note. This patch goes for the latter, and adds a new gdbarch hook to conditionalize the use of the corefile target description note. The hook is called use_target_description_from_corefile_notes. The hook defaults to returning true, meaning targets will use the corefile target description note. AArch64 Linux overrides the hook to return false when it detects any of the SVE or SME register notes in the corefile. Otherwise it should be fine for AArch64 Linux to use the corefile target description note. When we support per-thread target description notes, then we can augment the AArch64 Linux hook to rely on those notes. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Approved-By: Simon Marchi <simon.marchi@efficios.com> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| e58e9cc14e |
sme: Support TPIDR2 signal frame context
The Linux Kernel defines a separate context for the TPIDR2 register in a signal frame. Handle this additional context in gdb so this register gets restored properly when unwinding through signal frames. The TPIDR2 register is closely related to SME, and is available when SME support is reported. This is tested by testcases that are available in a later patch in the series. Regressions-tested on aarch64-linux Ubuntu 22.04/20.04. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| 5add3fce49 |
sme: Fixup sigframe gdbarch when vg/svg changes
With SME, where you have two different vector lengths (vl and svl), it may be the case that the current frame has a set of vector lengths (A) but the signal context has a distinct set of vector lengths (B). In this case, we may run into a situation where GDB attempts to use a gdbarch created for set A, but it is really dealing with a frame that was using set B. This is problematic, specially with SME, because now we have a different number of pseudo-registers and types that gets cached on creation of each gdbarch variation. For AArch64 we really need to be able to use the correct gdbarch for each frame, and I noticed the signal frame (tramp-frame) doesn't have a settable prev_arch field. So it ends up using the default frame_unwind_arch function and eventually calling get_frame_arch (next_frame). That means the previous frame will always have the same gdbarch as the current frame. This patch first refactors the AArch64/Linux signal context code, simplifying it and making it reusable for our purposes of calculating the previous frame's gdbarch. I introduced a struct that holds information that we have found in the signal context, and with which we can make various decisions. Finally, a small change to tramp-frame.c and tramp-frame.h to expose a prev_arch hook that the architecture can set. With this new field, AArch64/Linux can implement a hook that looks at the signal context and infers the gdbarch for the previous frame. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Approved-By: Simon Marchi <simon.marchi@efficios.com> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| f62b3d21ec |
sme: Signal frame support
Teach gdb about the ZA/SSVE state on signal frames and how to restore the contents of the registers. There is a new ZA_MAGIC context that the Linux Kernel uses to communicate the ZA register state to gdb. The SVE_MAGIC context has also been adjusted to contain a flag indicating whether it is a SVE or SSVE state. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| 1bb099a244 |
sve: Fix signal frame z/v register restore
While doing some SME work, I ran into the situation where the Z register contents restored from a signal frame are incorrect if the signal frame only contains fpsimd state and no sve state. This happens because we only restore the v register values in that case, and don't do anything for the z registers. Fix this by initializing the z registers to 0 and then copying over the overlapping part of the v registers to the z registers. While at it, refactor the code a bit to simplify it and make it smaller. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> |
|||
| deb65a3cd8 |
gdb: add gdbarch::displaced_step_buffer_length
The gdbarch::max_insn_length field is used mostly to support displaced stepping; it controls the size of the buffers allocated for the displaced-step instruction, and is also used when first copying the instruction, and later, when fixing up the instruction, in order to read in and parse the instruction being stepped. However, it has started to be used in other places in GDB, for example, it's used in the Python disassembler API, and it is used on amd64 as part of branch-tracing instruction classification. The problem is that the value assigned to max_insn_length is not always the maximum instruction length, but sometimes is a multiple of that length, as required to support displaced stepping, see rs600, ARM, and AArch64 for examples of this. It seems to me that we are overloading the meaning of the max_insn_length field, and I think that could potentially lead to confusion. I propose that we add a new gdbarch field, gdbarch::displaced_step_buffer_length, this new field will do exactly what it says on the tin; represent the required displaced step buffer size. The max_insn_length field can then do exactly what it claims to do; represent the maximum length of a single instruction. As some architectures (e.g. i386, and amd64) only require their displaced step buffers to be a single instruction in size, I propose that the default for displaced_step_buffer_length will be the value of max_insn_length. Architectures than need more buffer space can then override this default as needed. I've updated all architectures to setup the new field if appropriate, and I've audited all calls to gdbarch_max_insn_length and switched to gdbarch_displaced_step_buffer_length where appropriate. There should be no user visible changes after this commit. Approved-By: Simon Marchi <simon.marchi@efficios.com> |
|||
| 6d0020873d |
[aarch64] Enable pointer authentication support for aarch64 bare metal/kernel mode addresses
At the moment GDB only handles pointer authentication (pauth) for userspace
addresses and if we're debugging a Linux-hosted program.
The Linux Kernel can be configured to use pauth instructions for some
additional security hardening, but GDB doesn't handle this well.
To overcome this limitation, GDB needs a couple things:
1 - The target needs to advertise pauth support.
2 - The hook to remove non-address bits from a pointer needs to be registered
in aarch64-tdep.c as opposed to aarch64-linux-tdep.c.
There is a patch for QEMU that addresses the first point, and it makes
QEMU's gdbstub expose a couple more pauth mask registers, so overall we will
have up to 4 pauth masks (2 masks or 4 masks):
pauth_dmask
pauth_cmask
pauth_dmask_high
pauth_cmask_high
pauth_dmask and pauth_cmask are the masks used to remove pauth signatures
from userspace addresses. pauth_dmask_high and pauth_cmask_high masks are used
to remove pauth signatures from kernel addresses.
The second point is easily addressed by moving code around.
When debugging a Linux Kernel built with pauth with an unpatched GDB, we get
the following backtrace:
#0 __fput (file=0xffff0000c17a6400) at /repos/linux/fs/file_table.c:296
#1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
#2 0x30008000080ade30 [PAC] in ?? ()
#3 0x30d48000080ade30 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
With a patched GDB, we get something a lot more meaningful:
#0 __fput (file=0xffff0000c1bcfa00) at /repos/linux/fs/file_table.c:296
#1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
#2 0xffff8000080ade30 [PAC] in task_work_run () at /repos/linux/kernel/task_work.c:179
#3 0xffff80000801db90 [PAC] in resume_user_mode_work (regs=0xffff80000a96beb0) at /repos/linux/include/linux/resume_user_mode.h:49
#4 do_notify_resume (regs=regs@entry=0xffff80000a96beb0, thread_flags=4) at /repos/linux/arch/arm64/kernel/signal.c:1127
#5 0xffff800008fb9974 [PAC] in prepare_exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:137
#6 exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:142
#7 el0_svc (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:638
#8 0xffff800008fb9d34 [PAC] in el0t_64_sync_handler (regs=<optimized out>) at /repos/linux/arch/arm64/kernel/entry-common.c:655
#9 0xffff800008011548 [PAC] in el0t_64_sync () at /repos/linux/arch/arm64/kernel/entry.S:586
Backtrace stopped: Cannot access memory at address 0xffff80000a96c0c8
|
|||
| bbe912ba88 |
Turn some value_contents functions into methods
This turns value_contents_raw, value_contents_writeable, and value_contents_all_raw into methods on value. The remaining functions will be changed later in the series; they were a bit trickier and so I didn't include them in this patch. Approved-By: Simon Marchi <simon.marchi@efficios.com> |
|||
| 213516ef31 |
Update copyright year range in header of all files managed by GDB
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023. |
|||
| d88cb738e6 |
[aarch64] Fix removal of non-address bits for PAuth
PR gdb/28947 The address_significant gdbarch setting was introduced as a way to remove non-address bits from pointers, and it is specified by a constant. This constant represents the number of address bits in a pointer. Right now AArch64 is the only architecture that uses it, and 56 was a correct option so far. But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes from the address space to store the required information. We could also have cases where we're using both PAuth and MTE. We could adjust the constant to 48 to cover those cases, but this doesn't cover the case where GDB needs to sign-extend kernel addresses after removal of the non-address bits. This has worked so far because bit 55 is used to select between kernel-space and user-space addresses. But trying to clear a range of bits crossing the bit 55 boundary requires the hook to be smarter. The following patch renames the gdbarch hook from significant_addr_bit to remove_non_address_bits and passes a pointer as opposed to the number of bits. The hook is now responsible for removing the required non-address bits and sign-extending the address if needed. While at it, make GDB and GDBServer share some more code for aarch64 and add a new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp. Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947 Approved-By: Simon Marchi <simon.marchi@efficios.com> |
|||
| ba60b96371 |
[aarch64] Add TPIDR2 register support for Linux
With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and it will be added to the existing NT_ARM_TLS register set. Kernel patches are being reviewed here: https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/ From GDB's perspective, we handle it in a similar way to the existing TPIDR register. But we need to consider cases of systems that only have TPIDR and systems that have both TPIDR and TPIDR2. With that in mind, the following patch adds the required code to support TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a dynamically-generated target description as opposed to a static target description containing only TPIDR. That means we can remove the gdb/features/aarch64-tls.xml file and replace the existing gdb/features/aarch64-tls.c auto-generated file with a new file that dynamically generates the target description containing either TPIDR alone or TPIDR and TPIDR2. In the future, when *BSD's start to support this register, they can just enable it as is being done for the AArch64 Linux target. The core file read/write code has been updated to support TPIDR2 as well. On GDBserver's side, there is a small change to the find_regno function to expose a non-throwing version of it. It always seemed strange to me how find_regno causes the whole operation to abort if it doesn't find a particular register name. The patch moves code from find_regno into find_regno_no_throw and makes find_regno call find_regno_no_throw instead. This allows us to do register name lookups to find a particular register number without risking erroring out if nothing is found. The patch also adjusts the feature detection code for aarch64-fbsd, since the infrastructure is shared amongst all aarch64 targets. I haven't added code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if that will happen. |
|||
| 1639fab33b |
gdb: rename target_read_auxv(target_ops *) to target_read_auxv_raw
Having two overloads of target_read_auxv that don't have the same goals is confusing. Rename the one that reads from an explicit target_ops to target_read_auxv_raw. Also, it occured to me that the non-raw version could use the raw version, that reduces duplication a bit. Change-Id: I28e5f7cecbfcacd0174d4686efb3e4a23b4ad491 |
|||
| 82d23ca811 |
gdb: fix auxv caching
There's a flaw in the interaction of the auxv caching and the fact that target_auxv_search allows reading auxv from an arbitrary target_ops (passed in as a parameter). This has consequences as explained in this thread: https://inbox.sourceware.org/gdb-patches/20220719144542.1478037-1-luis.machado@arm.com/ In summary, when loading an AArch64 core file with MTE support by passing the executable and core file names directly to GDB, we see the MTE info: $ ./gdb -nx --data-directory=data-directory -q aarch64-mte-gcore aarch64-mte-gcore.core ... Program terminated with signal SIGSEGV, Segmentation fault Memory tag violation while accessing address 0x0000ffff8ef5e000 Allocation tag 0x1 Logical tag 0x0. #0 0x0000aaaade3d0b4c in ?? () (gdb) But if we do it as two separate commands (file and core) we don't: $ ./gdb -nx --data-directory=data-directory -q -ex "file aarch64-mte-gcore" -ex "core aarch64-mte-gcore.core" ... Program terminated with signal SIGSEGV, Segmentation fault. #0 0x0000aaaade3d0b4c in ?? () (gdb) The problem with the latter is that auxv data gets improperly cached between the two commands. When executing the file command, auxv gets first queried here, when loading the executable: #0 target_auxv_search (ops=0x55555b842400 <exec_ops>, match=0x9, valp=0x7fffffffc5d0) at /home/simark/src/binutils-gdb/gdb/auxv.c:383 #1 0x0000555557e576f2 in svr4_exec_displacement (displacementp=0x7fffffffc8c0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2482 #2 0x0000555557e594d1 in svr4_relocate_main_executable () at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2878 #3 0x0000555557e5989e in svr4_solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2933 #4 0x0000555557e6e49f in solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib.c:1253 #5 0x0000555557f33e29 in symbol_file_command (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/symfile.c:1655 #6 0x00005555573319c3 in file_command (arg=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:555 #7 0x0000555556e47185 in do_simple_func (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1, c=0x612000047740) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:95 #8 0x0000555556e551c9 in cmd_func (cmd=0x612000047740, args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2543 #9 0x00005555580e63fd in execute_command (p=0x7fffffffe02c "e", from_tty=1) at /home/simark/src/binutils-gdb/gdb/top.c:692 #10 0x0000555557771913 in catch_command_errors (command=0x5555580e55ad <execute_command(char const*, int)>, arg=0x7fffffffe017 "file aarch64-mte-gcore", from_tty=1, do_bp_actions=true) at /home/simark/src/binutils-gdb/gdb/main.c:513 #11 0x0000555557771fba in execute_cmdargs (cmdarg_vec=0x7fffffffd570, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffd230) at /home/simark/src/binutils-gdb/gdb/main.c:608 #12 0x00005555577755ac in captured_main_1 (context=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1299 #13 0x0000555557775c2d in captured_main (data=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1320 #14 0x0000555557775cc2 in gdb_main (args=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1345 #15 0x00005555568bdcbe in main (argc=10, argv=0x7fffffffdba8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32 Here, target_auxv_search is called on the inferior's target stack. The target stack only contains the exec target, so the query returns empty auxv data. This gets cached for that inferior in `auxv_inferior_data`. In its constructor (before it is pushed to the inferior's target stack), the core_target needs to identify the right target description from the core, and for that asks the gdbarch to read a target description from the core file. Because some implementations of gdbarch_core_read_description (such as AArch64's) need to read auxv data from the core in order to determine the right target description, the core_target passes a pointer to itself, allowing implementations to call target_auxv_search it. However, because we have previously cached (empty) auxv data for that inferior, target_auxv_search searched that cached (empty) auxv data, not auxv data read from the core. Remember that this data was obtained by reading auxv on the inferior's target stack, which only contained an exec target. The problem I see is that while target_auxv_search offers the flexibility of reading from an arbitrary (passed as an argument) target, the caching doesn't do the distinction of which target is being queried, and where the cached data came from. So, you could read auxv from a target A, it gets cached, then you try to read auxv from a target B, and it returns the cached data from target A. That sounds wrong. In our case, we expect to read different auxv data from the core target than what we have read from the target stack earlier, so it doesn't make sense to hit the cache in this case. To fix this, I propose splitting the code paths that read auxv data from an inferior's target stack and those that read from a passed-in target. The code path that reads from the target stack will keep caching, whereas the one that reads from a passed-in target won't. And since, searching in auxv data is independent from where this data came from, split the "read" part from the "search" part. From what I understand, auxv caching was introduced mostly to reduce latency on remote connections, when doing many queries. With the change I propose, only the queries done while constructing the core_target end up not using cached auxv data. This is fine, because there are just a handful of queries max, done at this point, and reading core files is local. The changes to auxv functions are: - Introduce 2 target_read_auxv functions. One reads from an explicit target_ops and doesn't do caching (to be used in gdbarch_core_read_description context). The other takes no argument, reads from the current inferior's target stack (it looks just like a standard target function wrapper) and does caching. The first target_read_auxv actually replaces get_auxv_inferior_data, since it became a trivial wrapper around it. - Change the existing target_auxv_search to not read auxv data from the target, but to accept it as a parameter (a gdb::byte_vector). This function doesn't care where the data came from, it just searches in it. It still needs to take a target_ops and gdbarch to know how to parse auxv entries. - Add a convenience target_auxv_search overload that reads auxv data from the inferior's target stack and searches in it. This overload is useful to replace the exist target_auxv_search calls that passed the `current_inferior ()->top_target ()` target and keep the call sites short. - Modify parse_auxv to accept a target_ops and gdbarch to use for parsing entries. Not strictly related to the rest of this change, but it seems like a good change in the context. Changes in architecture-specific files (tdep and nat): - In linux-tdep, linux_get_hwcap and linux_get_hwcap2 get split in two, similar to target_auxv_search. One version receives auxv data, target and arch as parameters. The other gets everything from the current inferior. The latter is for convenience, to avoid making call sites too ugly. - Call sites of linux_get_hwcap and linux_get_hwcap2 are adjusted to use either of the new versions. The call sites in gdbarch_core_read_description context explicitly read auxv data from the passed-in target and call the linux_get_hwcap{,2} function with parameters. Other call sites use the versions without parameters. - Same idea for arm_fbsd_read_description_auxv. - Call sites of target_auxv_search that passed `current_inferior ()->top_target ()` are changed to use the target_auxv_search overload that works in the current inferior. Reviewed-By: John Baldwin <jhb@FreeBSD.org> Reviewed-By: Luis Machado <luis.machado@arm.com> Change-Id: Ib775a220cf1e76443fb7da2fdff8fc631128fe66 |
|||
| bd2b40ac12 |
Change GDB to use frame_info_ptr
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
|
|||
| 08106042d9 |
gdb: move the type cast into gdbarch_tdep
I built GDB for all targets on a x86-64/GNU-Linux system, and
then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run"
the binary on the native target. I got this error:
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) file /tmp/hello.rv32.exe
Reading symbols from /tmp/hello.rv32.exe...
(gdb) show architecture
The target architecture is set to "auto" (currently "riscv:rv32").
(gdb) run
Starting program: /tmp/hello.rv32.exe
../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed.
What's going on here is this; initially the architecture is i386, this
is based on the default architecture, which is set based on the native
target. After loading the RISC-V executable the architecture of the
current inferior is updated based on the architecture of the
executable.
When we "run", GDB does a fork & exec, with the inferior being
controlled through ptrace. GDB sees an initial stop from the inferior
as soon as the inferior comes to life. In response to this stop GDB
ends up calling save_stop_reason (linux-nat.c), which ends up trying
to read register from the inferior, to do this we end up calling
target_ops::fetch_registers, which, for the x86-64 native target,
calls amd64_linux_nat_target::fetch_registers.
After this I eventually end up in i387_supply_fxsave, different x86
based targets will end in different functions to fetch registers, but
it doesn't really matter which function we end up in, the problem is
this line, which is repeated in many places:
i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch);
The problem here is that the ARCH in this line comes from the current
inferior, which, as we discussed above, will be a RISC-V gdbarch, the
tdep field will actually be of type riscv_gdbarch_tdep, not
i386_gdbarch_tdep. After this cast we are relying on undefined
behaviour, in my case I happen to trigger an assert, but this might
not always be the case.
The thing I tried that exposed this problem was of course, trying to
start an executable of the wrong architecture on a native target. I
don't think that the correct solution for this problem is to detect,
at the point of cast, that the gdbarch_tdep object is of the wrong
type, but, I did wonder, is there a way that we could protect
ourselves from incorrectly casting the gdbarch_tdep object?
I think that there is something we can do here, and this commit is the
first step in that direction, though no actual check is added by this
commit.
This commit can be split into two parts:
(1) In gdbarch.h and arch-utils.c. In these files I have modified
gdbarch_tdep (the function) so that it now takes a template argument,
like this:
template<typename TDepType>
static inline TDepType *
gdbarch_tdep (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch);
return static_cast<TDepType *> (tdep);
}
After this change we are no better protected, but the cast is now
done within the gdbarch_tdep function rather than at the call sites,
this leads to the second, much larger change in this commit,
(2) Everywhere gdbarch_tdep is called, we make changes like this:
- i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch);
+ i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch);
There should be no functional change after this commit.
In the next commit I will build on this change to add an assertion in
gdbarch_tdep that checks we are casting to the correct type.
|
|||
| 68cffbbd44 |
[AArch64] MTE corefile support
Teach GDB how to dump memory tags for AArch64 when using the gcore command and how to read memory tag data back from a core file generated by GDB (via gcore) or by the Linux kernel. The format is documented in the Linux Kernel documentation [1]. Each tagged memory range (listed in /proc/<pid>/smaps) gets dumped to its own PT_AARCH64_MEMTAG_MTE segment. A section named ".memtag" is created for each of those segments when reading the core file back. To save a little bit of space, given MTE tags only take 4 bits, the memory tags are stored packed as 2 tags per byte. When reading the data back, the tags are unpacked. I've added a new testcase to exercise the feature. Build-tested with --enable-targets=all and regression tested on aarch64-linux Ubuntu 20.04. [1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support) |
|||
| 43f074cde4 |
[gdb/record] Support recording of getrandom
Add missing support for recording of linux syscall getrandom. Tested on x86_64-linux with native and target board unix/-m32. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22081 |
|||
| 0ee6b1c511 |
Use aarch64_features to describe register features in target descriptions.
Replace the sve bool member of aarch64_features with a vq member that holds the vector quotient. It is zero if SVE is not present. Add std::hash<> specialization and operator== so that aarch64_features can be used as a key with std::unordered_map<>. Change the various functions that create or lookup aarch64 target descriptions to accept a const aarch64_features object rather than a growing number of arguments. Replace the multi-dimension tdesc_aarch64_list arrays used to cache target descriptions with unordered_maps indexed by aarch64_feature. |
|||
| 224151d774 | Read the tpidr register from NT_ARM_TLS core dump notes on Linux Aarch64. | |||
| 414d5848bb | Add an aarch64-tls feature which includes the tpidr register. | |||
| 6cb06a8cda |
Unify gdb printf functions
Now that filtered and unfiltered output can be treated identically, we can unify the printf family of functions. This is done under the name "gdb_printf". Most of this patch was written by script. |
|||
| 4a94e36819 |
Automatic Copyright Year update after running gdb/copyright.py
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script. |
|||
| d68510ac19 |
Use correct stream for process record output
The process record code often emits unfiltered output. In some cases, this output ought to go to gdb_stderr (but see below). In other cases, the output is guarded by a logging variable and so ought to go to gdb_stdlog. This patch makes these changes. Note that in many cases, the output to stderr is followed by a "return -1", which is how process record indicates an error. It seems to me that calling error here would be preferable, because, in many cases, that's all the caller does when it sees a -1. However, I haven't made this change. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 |
|||
| 345bd07cce |
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types. This is not possible at the moment (in theory), because of the one definition rule. To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and make them inherit from a gdbarch_tdep base class. The inheritance is necessary to be able to pass pointers to all these <arch>_gdbarch_tdep objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep. These objects are never deleted through a base class pointer, so I didn't include a virtual destructor. In the future, if gdbarch objects deletable, I could imagine that the gdbarch_tdep objects could become owned by the gdbarch objects, and then it would become useful to have a virtual destructor (so that the gdbarch object can delete the owned gdbarch_tdep object). But that's not necessary right now. It turns out that RISC-V already has a gdbarch_tdep that is non-default-constructible, so that provides a good motivation for this change. Most changes are fairly straightforward, mostly needing to add some casts all over the place. There is however the xtensa architecture, doing its own little weird thing to define its gdbarch_tdep. I did my best to adapt it, but I can't test those changes. Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b |
|||
| 50888e42dc |
gdb: change functions returning value contents to use gdb::array_view
The bug fixed by this [1] patch was caused by an out-of-bounds access to a value's content. The code gets the value's content (just a pointer) and then indexes it with a non-sensical index. This made me think of changing functions that return value contents to return array_views instead of a plain pointer. This has the advantage that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view are checked, making bugs more apparent / easier to find. This patch changes the return types of these functions, and updates callers to call .data() on the result, meaning it's not changing anything in practice. Additional work will be needed (which can be done little by little) to make callers propagate the use of array_view and reap the benefits. [1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3 |
|||
| c0154a4a21 |
gdb: Don't assume r_ldsomap when r_version > 1 on Linux
The r_ldsomap field is specific to Solaris (part of librtld_db), and should never be accessed for Linux. glibc is planning to add a field to support multiple namespaces. But there will be no r_ldsomap when r_version is bumped to 2. Add linux_[ilp32|lp64]_fetch_link_map_offsets to set r_ldsomap_offset to -1 and use them for Linux targets. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28236 |
|||
| a52d0b9de1 |
Sanitize the address before working with allocation tags
Remove the logical tag/top byte from the address whenever we have to work with allocation tags. gdb/ChangeLog: 2021-06-28 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_memtag_matches_p): Remove the top byte. (aarch64_linux_set_memtags): Likewise. (aarch64_linux_get_memtag): Likewise. (aarch64_linux_report_signal_info): Likewise. |
|||
| e660f4e905 |
Fix FFR register size for core files.
The FFR register has a size of VL bits, not 32 bits. This causes issues when writing core files with the gcore command and when reading them. The FFR register sometimes shows up with garbage data. gdb/ChangeLog: 2021-06-28 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Fix FFR register size. |
|||
| 0a3b55a669 |
Fix tag_ctl register size in the core file.
This register should be 64 bits in size, but the current code only saves 32 bits. This is due to an early assumption that tag_ctl would be 32 bits in size. gdb/ChangeLog: 2021-06-28 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Update tag_ctl register size. * aarch64-linux-tdep.h (AARCH64_LINUX_SIZEOF_MTE_REGSET): Set to 8 and update comments. |
|||
| ffcc2a1549 |
AArch64: Add MTE register set support for core files
This patch handles the tagged_addr_ctrl register that is exported when generating a core file. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Handle MTE register set. * aarch64-linux-tdep.h (AARCH64_LINUX_SIZEOF_MTE_REGSET): Define. |
|||
| cf44c9fa1b |
AArch64: Report tag violation error information
Whenever a memory tag violation occurs, we get a SIGSEGV. Additional information can be obtained through the siginfo data structure. For AArch64 the Linux kernel may expose the fault address and tag information, if we have a synchronous event. Otherwise there is no fault address available. The synchronous event looks like this: -- (gdb) continue Continuing. Program received signal SIGSEGV, Segmentation fault Memory tag violation while accessing address 0x0500fffff7ff8000 Allocation tag 0x1. Logical tag 0x5 -- The asynchronous event looks like this: -- (gdb) continue Continuing. Program received signal SIGSEGV, Segmentation fault Memory tag violation Fault address unavailable. -- gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_report_signal_info): New function. (aarch64_linux_init_abi): Register aarch64_linux_report_signal_info as the report_signal_info hook. * arch/aarch64-linux.h (SEGV_MTEAERR): Define. (SEGV_MTESERR): Define. |
|||
| b4a7d4fcfe |
AArch64: Add unit testing for logical tag set/get operations
Add some unit testing to exercise setting/getting logical tags in the AArch64 implementation. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c: Include gdbsupport/selftest.h. (aarch64_linux_ltag_tests): New function. (_initialize_aarch64_linux_tdep): Register aarch64_linux_ltag_tests. |
|||
| c7782e50b1 |
AArch64: Implement the memory tagging gdbarch hooks
This patch implements the memory tagging gdbarch hooks for AArch64, for the MTE feature. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c: Include target.h, arch-utils.h, value.h. (aarch64_mte_get_atag, aarch64_linux_tagged_address_p) (aarch64_linux_memtag_mismatch_p, aarch64_linux_set_memtags) (aarch64_linux_get_memtag, aarch64_linux_memtag_to_string): New functions. (aarch64_linux_init_abi): Initialize MTE-related gdbarch hooks. * arch/aarch64-mte-linux.c (aarch64_mte_make_ltag_bits) (aarch64_mte_make_ltag, aarch64_linux_set_ltag) (aarch64_linux_get_ltag): New functions. * arch/aarch64-mte-linux.h (AARCH64_MTE_LOGICAL_TAG_START_BIT) (AARCH64_MTE_LOGICAL_MAX_VALUE): Define. (aarch64_mte_make_ltag_bits, aarch64_mte_make_ltag) (aarch64_mte_set_ltag, aarch64_mte_get_ltag): New prototypes. |
|||
| c1bd443b4d |
AArch64: Add target description/feature for MTE registers
This patch adds a target description and feature "mte" for aarch64. It includes one new register, tag_ctl, that can be used to configure the tag generation rules and sync/async modes. It is 64-bit in size. The patch also adjusts the code that creates the target descriptions at runtime based on CPU feature checks. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Take MTE flag into account. Slight refactor to hwcap flag checking. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Likewise. * aarch64-tdep.c (tdesc_aarch64_list): Add one more dimension for MTE. (aarch64_read_description): Add mte_p parameter and update to use it. Update the documentation. (aarch64_gdbarch_init): Update call to aarch64_read_description. * aarch64-tdep.h (aarch64_read_description): Add mte_p parameter. * arch/aarch64.c: Include ../features/aarch64-mte.c. (aarch64_create_target_description): Add mte_p parameter and update the code to use it. * arch/aarch64.h (aarch64_create_target_description): Add mte_p parameter. * features/Makefile (FEATURE_XMLFILES): Add aarch64-mte.xml. * features/aarch64-mte.c: New file, generated. * features/aarch64-mte.xml: New file. gdbserver/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * linux-aarch64-ipa.cc (get_ipa_tdesc): Update call to aarch64_linux_read_description. (initialize_low_tracepoint): Likewise. * linux-aarch64-low.cc (aarch64_target::low_arch_setup): Take MTE flag into account. * linux-aarch64-tdesc.cc (tdesc_aarch64_list): Add one more dimension for MTE. (aarch64_linux_read_description): Add mte_p parameter and update to use it. * linux-aarch64-tdesc.h (aarch64_linux_read_description): Add mte_p parameter. |
|||
| 0424512519 |
AArch64: Add MTE CPU feature check support
This patch is a preparation for the next patches implementing MTE. It just adds a HWCAP2 constant for MTE, creates a new generic arch/aarch64-mte-linux.h file and includes that file in the source files that will use it. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * Makefile.in (HFILES_NO_SRCDIR): Add arch/aarch64-mte-linux.h. * aarch64-linux-nat.c: Include arch/aarch64-mte-linux.h. * aarch64-linux-tdep.c: Likewise * arch/aarch64-mte-linux.h: New file. gdbserver/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * linux-aarch64-low.cc: Include arch/aarch64-mte-linux.h. |
|||
| 4c5e7a930a |
Convert stap probes to create operations
This changes the stap probe code to create operations, rather than exp_elements. gdb/ChangeLog 2021-03-08 Tom Tromey <tom@tromey.com> * stap-probe.c (binop_maker_ftype): New typedef. (stap_maker_map): New global. (stap_make_binop): New function. (stap_parse_register_operand): Return operation_up. (stap_parse_single_operand, stap_parse_argument_conditionally) (stap_parse_argument_1): Likewise. (stap_parse_argument): Create operations. (stap_probe::parse_arguments): Update. (_initialize_stap_probe): Initialize stap_maker_map. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Change return type. * i386-tdep.h (i386_stap_parse_special_token): Change return type. * i386-tdep.c (i386_stap_parse_special_token_triplet) (i386_stap_parse_special_token_three_arg_disp) (i386_stap_parse_special_token): Change return type. * gdbarch.sh (stap_parse_special_token): Change return type. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * arm-linux-tdep.c (arm_stap_parse_special_token): Change return type. * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Change return type. |
|||
| 6bd434d6ca |
gdb: make some variables static
I'm trying to enable clang's -Wmissing-variable-declarations warning. This patch fixes all the obvious spots where we can simply add "static" (at least, found when building on x86-64 Linux). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static. * aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind, aarch64_stub_unwind, aarch64_normal_base, ): Make static. * arm-linux-tdep.c (arm_prologue_unwind): Make static. * arm-tdep.c (struct frame_unwind): Make static. * auto-load.c (auto_load_safe_path_vec): Make static. * csky-tdep.c (csky_stub_unwind): Make static. * gdbarch.c (gdbarch_data_registry): Make static. * gnu-v2-abi.c (gnu_v2_abi_ops): Make static. * i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static. * i386-tdep.c (i386_frame_setup_skip_insns, i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns): Make static. * infrun.c (observer_mode): Make static. * linux-nat.c (sigchld_action): Make static. * linux-thread-db.c (thread_db_list): Make static. * maint-test-options.c (maintenance_test_options_list): * mep-tdep.c (mep_csr_registers): Make static. * mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name. (stats): Make static. * nat/linux-osdata.c (struct osdata_type): Make static. * ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static. * progspace.c (last_program_space_num): Make static. * python/py-param.c (struct parm_constant): Remove struct type name. (parm_constants): Make static. * python/py-record-btrace.c (btpy_list_methods): Make static. * python/py-record.c (recpy_gap_type): Make static. * record.c (record_goto_cmdlist): Make static. * regcache.c (regcache_descr_handle): Make static. * registry.h (DEFINE_REGISTRY): Make definition static. * symmisc.c (std_in, std_out, std_err): Make static. * top.c (previous_saved_command_line): Make static. * tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make static. * unittests/command-def-selftests.c (nr_duplicates, nr_invalid_prefixcmd, lists): Make static. * unittests/observable-selftests.c (test_notification): Make static. * unittests/optional/assignment/1.cc (counter): Make static. * unittests/optional/assignment/2.cc (counter): Make static. * unittests/optional/assignment/3.cc (counter): Make static. * unittests/optional/assignment/4.cc (counter): Make static. * unittests/optional/assignment/5.cc (counter): Make static. * unittests/optional/assignment/6.cc (counter): Make static. gdbserver/ChangeLog: * ax.cc (bytecode_address_table): Make static. * debug.cc (debug_file): Make static. * linux-low.cc (stopping_threads): Make static. (step_over_bkpt): Make static. * linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static. * tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt, alloced_trace_state_variables, trace_buffer_ctrl, tracing_start_time, tracing_stop_time, tracing_user_name, tracing_notes, tracing_stop_note): Make static. Change-Id: Ic1d8034723b7802502bda23770893be2338ab020 |
|||
| ccbe4c82d5 |
Use gdb::array_view for setting value bytes in trad-frame
This patch updates the functions setting value bytes in trad-frame to use a gdb::array_view instead of passing a buffer and a size. gdb/ChangeLog: 2021-01-19 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg): Pass in an array_view. * trad-frame.c (trad_frame_set_value_bytes): Use gdb::array_view instead of buffer and size. (trad_frame_set_reg_value_bytes): Likewise. * trad-frame.h (trad_frame_set_reg_value_bytes): Likewise. (trad_frame_set_value_bytes): Likewise. |
|||
| 3666a04883 |
Update copyright year range in all GDB files
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|||
| 6afcd2d416 |
[AArch64] SVE/FPSIMD fixup for big endian
The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype. |
|||
| 480af54cf6 |
gdb: make displaced stepping implementation capable of managing multiple buffers
The displaced_step_buffer class, introduced in the previous patch, manages access to a single displaced step buffer. Change it into displaced_step_buffers (note the plural), which manages access to multiple displaced step buffers. When preparing a displaced step for a thread, it looks for an unused buffer. For now, all users still pass a single displaced step buffer, so no real behavior change is expected here. The following patch makes a user pass more than one buffer, so the functionality introduced by this patch is going to be useful in the next one. gdb/ChangeLog: * displaced-stepping.h (struct displaced_step_buffer): Rename to... (struct displaced_step_buffers): ... this. <m_addr, m_current_thread, m_copy_insn_closure>: Remove. <struct displaced_step_buffer>: New inner class. <m_buffers>: New. * displaced-stepping.c (displaced_step_buffer::prepare): Rename to... (displaced_step_buffers::prepare): ... this, adjust for multiple buffers. (displaced_step_buffer::finish): Rename to... (displaced_step_buffers::finish): ... this, adjust for multiple buffers. (displaced_step_buffer::copy_insn_closure_by_addr): Rename to... (displaced_step_buffers::copy_insn_closure_by_addr): ... this, adjust for multiple buffers. (displaced_step_buffer::restore_in_ptid): Rename to... (displaced_step_buffers::restore_in_ptid): ... this, adjust for multiple buffers. * linux-tdep.h (linux_init_abi): Change supports_displaced_step for num_disp_step_buffers. * linux-tdep.c (struct linux_gdbarch_data) <num_disp_step_buffers>: New field. (struct linux_info) <disp_step_buf>: Rename to... <disp_step_bufs>: ... this, change type to displaced_step_buffers. (linux_displaced_step_prepare): Use linux_gdbarch_data::num_disp_step_buffers to create that number of buffers. (linux_displaced_step_finish): Adjust. (linux_displaced_step_copy_insn_closure_by_addr): Adjust. (linux_displaced_step_restore_all_in_ptid): Adjust. (linux_init_abi): Change supports_displaced_step parameter for num_disp_step_buffers, save it in linux_gdbarch_data. * aarch64-linux-tdep.c (aarch64_linux_init_abi): Adjust. * alpha-linux-tdep.c (alpha_linux_init_abi): Adjust. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Change supports_displaced_step parameter for num_disp_step_buffers. (amd64_linux_init_abi): Adjust. (amd64_x32_linux_init_abi): Adjust. * arc-linux-tdep.c (arc_linux_init_osabi): Adjust. * arm-linux-tdep.c (arm_linux_init_abi): Adjust. * bfin-linux-tdep.c (bfin_linux_init_abi): Adjust. * cris-linux-tdep.c (cris_linux_init_abi): Adjust. * csky-linux-tdep.c (csky_linux_init_abi): Adjust. * frv-linux-tdep.c (frv_linux_init_abi): Adjust. * hppa-linux-tdep.c (hppa_linux_init_abi): Adjust. * i386-linux-tdep.c (i386_linux_init_abi): Adjust. * ia64-linux-tdep.c (ia64_linux_init_abi): Adjust. * m32r-linux-tdep.c (m32r_linux_init_abi): Adjust. * m68k-linux-tdep.c (m68k_linux_init_abi): * microblaze-linux-tdep.c (microblaze_linux_init_abi): * mips-linux-tdep.c (mips_linux_init_abi): Adjust. * mn10300-linux-tdep.c (am33_linux_init_osabi): Adjust. * nios2-linux-tdep.c (nios2_linux_init_abi): Adjust. * or1k-linux-tdep.c (or1k_linux_init_abi): Adjust. * ppc-linux-tdep.c (ppc_linux_init_abi): Adjust. * riscv-linux-tdep.c (riscv_linux_init_abi): Adjust. * rs6000-tdep.c (struct ppc_inferior_data) <disp_step_buf>: Change type to displaced_step_buffers. * s390-linux-tdep.c (s390_linux_init_abi_any): Adjust. * sh-linux-tdep.c (sh_linux_init_abi): Adjust. * sparc-linux-tdep.c (sparc32_linux_init_abi): Adjust. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Adjust. * tic6x-linux-tdep.c (tic6x_uclinux_init_abi): Adjust. * tilegx-linux-tdep.c (tilegx_linux_init_abi): Adjust. * xtensa-linux-tdep.c (xtensa_linux_init_abi): Adjust. Change-Id: Ia9c02f207da2c9e1d9188020139619122392bb70 |
|||
| 187b041e25 |
gdb: move displaced stepping logic to gdbarch, allow starting concurrent displaced steps
Today, GDB only allows a single displaced stepping operation to happen
per inferior at a time. There is a single displaced stepping buffer per
inferior, whose address is fixed (obtained with
gdbarch_displaced_step_location), managed by infrun.c.
In the case of the AMD ROCm target [1] (in the context of which this
work has been done), it is typical to have thousands of threads (or
waves, in SMT terminology) executing the same code, hitting the same
breakpoint (possibly conditional) and needing to to displaced step it at
the same time. The limitation of only one displaced step executing at a
any given time becomes a real bottleneck.
To fix this bottleneck, we want to make it possible for threads of a
same inferior to execute multiple displaced steps in parallel. This
patch builds the foundation for that.
In essence, this patch moves the task of preparing a displaced step and
cleaning up after to gdbarch functions. This allows using different
schemes for allocating and managing displaced stepping buffers for
different platforms. The gdbarch decides how to assign a buffer to a
thread that needs to execute a displaced step.
On the ROCm target, we are able to allocate one displaced stepping
buffer per thread, so a thread will never have to wait to execute a
displaced step.
On Linux, the entry point of the executable if used as the displaced
stepping buffer, since we assume that this code won't get used after
startup. From what I saw (I checked with a binary generated against
glibc and musl), on AMD64 we have enough space there to fit two
displaced stepping buffers. A subsequent patch makes AMD64/Linux use
two buffers.
In addition to having multiple displaced stepping buffers, there is also
the idea of sharing displaced stepping buffers between threads. Two
threads doing displaced steps for the same PC could use the same buffer
at the same time. Two threads stepping over the same instruction (same
opcode) at two different PCs may also be able to share a displaced
stepping buffer. This is an idea for future patches, but the
architecture built by this patch is made to allow this.
Now, the implementation details. The main part of this patch is moving
the responsibility of preparing and finishing a displaced step to the
gdbarch. Before this patch, preparing a displaced step is driven by the
displaced_step_prepare_throw function. It does some calls to the
gdbarch to do some low-level operations, but the high-level logic is
there. The steps are roughly:
- Ask the gdbarch for the displaced step buffer location
- Save the existing bytes in the displaced step buffer
- Ask the gdbarch to copy the instruction into the displaced step buffer
- Set the pc of the thread to the beginning of the displaced step buffer
Similarly, the "fixup" phase, executed after the instruction was
successfully single-stepped, is driven by the infrun code (function
displaced_step_finish). The steps are roughly:
- Restore the original bytes in the displaced stepping buffer
- Ask the gdbarch to fixup the instruction result (adjust the target's
registers or memory to do as if the instruction had been executed in
its original location)
The displaced_step_inferior_state::step_thread field indicates which
thread (if any) is currently using the displaced stepping buffer, so it
is used by displaced_step_prepare_throw to check if the displaced
stepping buffer is free to use or not.
This patch defers the whole task of preparing and cleaning up after a
displaced step to the gdbarch. Two new main gdbarch methods are added,
with the following semantics:
- gdbarch_displaced_step_prepare: Prepare for the given thread to
execute a displaced step of the instruction located at its current PC.
Upon return, everything should be ready for GDB to resume the thread
(with either a single step or continue, as indicated by
gdbarch_displaced_step_hw_singlestep) to make it displaced step the
instruction.
- gdbarch_displaced_step_finish: Called when the thread stopped after
having started a displaced step. Verify if the instruction was
executed, if so apply any fixup required to compensate for the fact
that the instruction was executed at a different place than its
original pc. Release any resources that were allocated for this
displaced step. Upon return, everything should be ready for GDB to
resume the thread in its "normal" code path.
The displaced_step_prepare_throw function now pretty much just offloads
to gdbarch_displaced_step_prepare and the displaced_step_finish function
offloads to gdbarch_displaced_step_finish.
The gdbarch_displaced_step_location method is now unnecessary, so is
removed. Indeed, the core of GDB doesn't know how many displaced step
buffers there are nor where they are.
To keep the existing behavior for existing architectures, the logic that
was previously implemented in infrun.c for preparing and finishing a
displaced step is moved to displaced-stepping.c, to the
displaced_step_buffer class. Architectures are modified to implement
the new gdbarch methods using this class. The behavior is not expected
to change.
The other important change (which arises from the above) is that the
core of GDB no longer prevents concurrent displaced steps. Before this
patch, start_step_over walks the global step over chain and tries to
initiate a step over (whether it is in-line or displaced). It follows
these rules:
- if an in-line step is in progress (in any inferior), don't start any
other step over
- if a displaced step is in progress for an inferior, don't start
another displaced step for that inferior
After starting a displaced step for a given inferior, it won't start
another displaced step for that inferior.
In the new code, start_step_over simply tries to initiate step overs for
all the threads in the list. But because threads may be added back to
the global list as it iterates the global list, trying to initiate step
overs, start_step_over now starts by stealing the global queue into a
local queue and iterates on the local queue. In the typical case, each
thread will either:
- have initiated a displaced step and be resumed
- have been added back by the global step over queue by
displaced_step_prepare_throw, because the gdbarch will have returned
that there aren't enough resources (i.e. buffers) to initiate a
displaced step for that thread
Lastly, if start_step_over initiates an in-line step, it stops
iterating, and moves back whatever remaining threads it had in its local
step over queue to the global step over queue.
Two other gdbarch methods are added, to handle some slightly annoying
corner cases. They feel awkwardly specific to these cases, but I don't
see any way around them:
- gdbarch_displaced_step_copy_insn_closure_by_addr: in
arm_pc_is_thumb, arm-tdep.c wants to get the closure for a given
buffer address.
- gdbarch_displaced_step_restore_all_in_ptid: when a process forks
(at least on Linux), the address space is copied. If some displaced
step buffers were in use at the time of the fork, we need to restore
the original bytes in the child's address space.
These two adjustments are also made in infrun.c:
- prepare_for_detach: there may be multiple threads doing displaced
steps when we detach, so wait until all of them are done
- handle_inferior_event: when we handle a fork event for a given
thread, it's possible that other threads are doing a displaced step at
the same time. Make sure to restore the displaced step buffer
contents in the child for them.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
gdb/ChangeLog:
* displaced-stepping.h (struct
displaced_step_copy_insn_closure): Adjust comments.
(struct displaced_step_inferior_state) <step_thread,
step_gdbarch, step_closure, step_original, step_copy,
step_saved_copy>: Remove fields.
(struct displaced_step_thread_state): New.
(struct displaced_step_buffer): New.
* displaced-stepping.c (displaced_step_buffer::prepare): New.
(write_memory_ptid): Move from infrun.c.
(displaced_step_instruction_executed_successfully): New,
factored out of displaced_step_finish.
(displaced_step_buffer::finish): New.
(displaced_step_buffer::copy_insn_closure_by_addr): New.
(displaced_step_buffer::restore_in_ptid): New.
* gdbarch.sh (displaced_step_location): Remove.
(displaced_step_prepare, displaced_step_finish,
displaced_step_copy_insn_closure_by_addr,
displaced_step_restore_all_in_ptid): New.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* gdbthread.h (class thread_info) <displaced_step_state>: New
field.
(thread_step_over_chain_remove): New declaration.
(thread_step_over_chain_next): New declaration.
(thread_step_over_chain_length): New declaration.
* thread.c (thread_step_over_chain_remove): Make non-static.
(thread_step_over_chain_next): New.
(global_thread_step_over_chain_next): Use
thread_step_over_chain_next.
(thread_step_over_chain_length): New.
(global_thread_step_over_chain_enqueue): Add debug print.
(global_thread_step_over_chain_remove): Add debug print.
* infrun.h (get_displaced_step_copy_insn_closure_by_addr):
Remove.
* infrun.c (get_displaced_stepping_state): New.
(displaced_step_in_progress_any_inferior): Remove.
(displaced_step_in_progress_thread): Adjust.
(displaced_step_in_progress): Adjust.
(displaced_step_in_progress_any_thread): New.
(get_displaced_step_copy_insn_closure_by_addr): Remove.
(gdbarch_supports_displaced_stepping): Use
gdbarch_displaced_step_prepare_p.
(displaced_step_reset): Change parameter from inferior to
thread.
(displaced_step_prepare_throw): Implement using
gdbarch_displaced_step_prepare.
(write_memory_ptid): Move to displaced-step.c.
(displaced_step_restore): Remove.
(displaced_step_finish): Implement using
gdbarch_displaced_step_finish.
(start_step_over): Allow starting more than one displaced step.
(prepare_for_detach): Handle possibly multiple threads doing
displaced steps.
(handle_inferior_event): Handle possibility that fork event
happens while another thread displaced steps.
* linux-tdep.h (linux_displaced_step_prepare): New.
(linux_displaced_step_finish): New.
(linux_displaced_step_copy_insn_closure_by_addr): New.
(linux_displaced_step_restore_all_in_ptid): New.
(linux_init_abi): Add supports_displaced_step parameter.
* linux-tdep.c (struct linux_info) <disp_step_buf>: New field.
(linux_displaced_step_prepare): New.
(linux_displaced_step_finish): New.
(linux_displaced_step_copy_insn_closure_by_addr): New.
(linux_displaced_step_restore_all_in_ptid): New.
(linux_init_abi): Add supports_displaced_step parameter,
register displaced step methods if true.
(_initialize_linux_tdep): Register inferior_execd observer.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
supports_displaced_step parameter, adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
(amd64_linux_init_abi): Adjust call to
amd64_linux_init_abi_common.
(amd64_x32_linux_init_abi): Likewise.
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* alpha-linux-tdep.c (alpha_linux_init_abi): Adjust call to
linux_init_abi.
* arc-linux-tdep.c (arc_linux_init_osabi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* cris-linux-tdep.c (cris_linux_init_abi): Likewise.
* csky-linux-tdep.c (csky_linux_init_abi): Likewise.
* frv-linux-tdep.c (frv_linux_init_abi): Likewise.
* hppa-linux-tdep.c (hppa_linux_init_abi): Likewise.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m68k-linux-tdep.c (m68k_linux_init_abi): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mn10300-linux-tdep.c (am33_linux_init_osabi): Likewise.
* nios2-linux-tdep.c (nios2_linux_init_abi): Likewise.
* or1k-linux-tdep.c (or1k_linux_init_abi): Likewise.
* riscv-linux-tdep.c (riscv_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_any): Likewise.
* sh-linux-tdep.c (sh_linux_init_abi): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* tic6x-linux-tdep.c (tic6x_uclinux_init_abi): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* xtensa-linux-tdep.c (xtensa_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
* arm-tdep.c (arm_pc_is_thumb): Call
gdbarch_displaced_step_copy_insn_closure_by_addr instead of
get_displaced_step_copy_insn_closure_by_addr.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Adjust calls to
clear gdbarch methods.
* rs6000-tdep.c (struct ppc_inferior_data): New structure.
(get_ppc_per_inferior): New function.
(ppc_displaced_step_prepare): New function.
(ppc_displaced_step_finish): New function.
(ppc_displaced_step_restore_all_in_ptid): New function.
(rs6000_gdbarch_init): Register new gdbarch methods.
* s390-tdep.c (s390_gdbarch_init): Don't call
set_gdbarch_displaced_step_location, set new gdbarch methods.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.exp: Adjust pattern.
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.threads/non-stop-fair-events.exp: Likewise.
Change-Id: I387cd235a442d0620ec43608fd3dc0097fcbf8c8
|
|||
| dda83cd783 |
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695 |
|||
| 89203d4062 |
Update comments about removed function
regset_from_core_section doesn't exist anymore; it has been replaced by the iterate_over_regset_sections gdbarch method. Update comments accordingly to not confuse readers. gdb/ChangeLog: 2020-01-24 Christian Biesinger <cbiesinger@google.com> * aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections): Update comment. * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Likewise. * arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise. * gdbcore.h (deprecated_add_core_fns): Update comment to point to the correct replacement (iterate_over_regset_sections). * riscv-fbsd-tdep.c (riscv_fbsd_iterate_over_regset_sections): Update comment. Change-Id: I5eea4d18e15edae5d6dfd5d0d6241e5b2ae40daa |
|||
| 6c2659886f |
gdb: add back declarations for _initialize functions
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|||
| b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|||
| be155ebb94 |
Remove unused includes in aarch64-linux-tdep.c
include-what-you-use reports: ../../../src/binutils-gdb/gdb/aarch64-linux-tdep.c should remove these lines: - #include "arch-utils.h" // lines 24-24 - #include "auxv.h" // lines 48-48 - #include "cli/cli-utils.h" // lines 39-39 - #include "elf/common.h" // lines 49-49 - #include "inferior.h" // lines 35-35 Add an include for "target/target.h", otherwise target_read_memory isn't found. gdb/ChangeLog: * aarch64-linux-tdep.c: Remove includes. |
