Move these options up to the common dir so we only test & export
them once across all ports.
The setting only affects igen based ports, and they were turning
this on by default, so keep the default in place.
This makes it easier to override to point to an older version of guile.
The current cgen code doesn't work with guile-2, so need to point to an
older guile-1.8.
The cgen scache module is enabled by every cgen port, and with the
same default value of 16k (which matches the common default value).
Let's pull this option out of the individual ports (via CPPFLAGS)
and into the common code (via config.h).
The object itself is compiled only for cgen ports atm, so that part
doesn't change. The scache code is initialized dynamically via the
modules.c logic. That's why the profile code needs an additional
CGEN_ARCH check.
This will allow us to collapse arch configure files more. Merging
the source files will require more future work, but integrating the
cgen & non-cgen worlds itself will take a lot.
These were never fully migrated from the psim to common code, and since
we've finished moving the logic into the runtime sim state, we won't ever
need these. So punt them.
This kills off another compile-time option by moving the setting to
the individual arch runtimes. This will allow dynamic selection by
the arch when doing a single build with multiple arches.
The sim_model_init rework is a little funky. In the past it was
disabled entirely if no default model was set. We maintain the
spirit of the logic by gating the fallback logic on whether the
port has defined any models.
We want to do a single build with all arches in one binary which means
we need to namespace sim_machs on a per-arch basis. Move it from a
global variable to the sim description structure so it can be setup at
runtime.
Changing the SIM_MODEL->num from an enum to an int is unfortunate, but
we specifically don't want to maintain a centralized list anymore, and
this was never used directly in common code, just passed to per-arch
callbacks.
The $(arch) variable is only setup for cgen ports, so calculate this
value dynamically. We also need to generate multiple inputs in order
to properly recreate the subdir Makefile, so list them all.
This helps these funcs get printf format checking coverage.
The sim-io.c hack as a result is a bit unfortunate, but the compiler
throws warnings when printing with empty strings. In this one case,
we actually want that due to the side-effect of the callback halting
execution for us.
These cover functions aren't used anywhere, so drop them. There was
one caller, but it's old DOS code that most likely hasn't been tested
in years, so just delete that too.
The cgen trace macros are a bit ugly in that they specify a series of
format strings & arguments in a single call. This means we pass a
non-literal string to printf and the compiler warns about it. Use
the diagnostic macros to suppress that in this one place.
If the user passed in values outside the range of [0, MAX_NR_PROCESSORS),
it would cause the code to access out-of-bind engine function pointers.
Add some asserts to catch that and to fix the related compiler warnings.
This fixes missing prototype warnings, and guarantees the prototypes
stay in sync with the function definitions. One of the macros had
fallen out by declaring the wrong return type.
If code tries to send a signal to itself, the callback layer ignores
it and forces the caller to handle it. This allows the sim to turn
that into an engine halt rather than actually killing the sim.
This will make it easier to emulate the syscall. If the kill target
is the sim itself, don't do anything. This forces the higher layers
to make a decision as to how to handle this event: like halting the
overall engine process.
We rewrite srcdir in subdir Makefiles that we generate from the common
parent dir since it points to the parent dir. Since @srcdir@ can be a
variety of formats (relative & absolute), switch to @abs_srcdir@ which
is a lot easier to adjust. Our use of srcdir in here should handle it.
There's been a prototype for this forever, but the implementation was
missing. Probably because there weren't any callers, but we'll start
using it to implement the kill function.
These ports only use the pieces that have been unified, so we can
merge them into the common configure script and get rid of their
unique one entirely.
We still compile & link separate run programs, and have dedicated
subdir Makefiles, but the configure script portion is merged.
The sim-hardware configure option allows builders to select a set of
device models to enable. But this seems like unnecessary overkill:
the existence of individual device models doesn't affect performance
at all as they are only enabled at runtime if the config uses them,
and individually these are all <5KB a piece. Stripping off a total
of ~50KB from a ~1MB binary doesn't seem useful, and it's extremely
unlikely anyone will ever bother.
So let's simplify the configure/make logic by turning sim-hardware
into a boolean option like many of the other sim options. Any ports
that have unique device models will declare them in their Makefile
instead of at configure time. This will allow us to (eventually)
unify the setting into the common dir.
Move these options up to the common dir so we only test & export
them once across all ports. It makes it available to targets that
aren't cgen-based, but those will just ignore the settings, so it
shouldn't be an issue.
I get this when building with gcc 11:
CC common/common_libcommon_a-sim-load.o
In file included from /home/simark/src/binutils-gdb/sim/common/sim-n-bits.h:27,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.c:259,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.h:599,
from /home/simark/src/binutils-gdb/sim/common/sim-basics.h:122,
from /home/simark/src/binutils-gdb/sim/common/sim-load.c:30:
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:27: error: 'offset_16' defined but not used [-Werror=unused-function]
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~
/home/simark/src/binutils-gdb/sim/../include/symcat.h:23:26: note: in definition of macro 'CONCAT2'
23 | #define CONCAT2(a,b) a##b
| ^
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:18: note: in expansion of macro 'XCONCAT2'
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~~
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:138:1: note: in expansion of macro 'offset_N'
138 | offset_N (unsigned_N *x,
| ^~~~~~~~
offset_N uses INLINE_SIM_ENDIAN, which uses UNUSED to put the "unused"
attribute. However, it appears after the function's return type, which
seems to make it not apply to the function. Moving it to before the
return type fixes the error.
Change all instances found in that file.
sim/common/ChangeLog:
* sim-inline.h: Move UNUSED before TYPE.
Change-Id: Ide20106683ed7a9ebf35d484dabf70b309cb1ba6
Move these options up to the common dir so we only test & export
them once across all ports. It also enables -Werror usage on the
common files we've been pulling out of arch subdirs.
As we merge settings from subdirs into the common configure, we
sometimes need to keep the settings working in both dirs. Create
a makefile fragment to pass them down so we don't have to run the
checks twice. For now, the file is empty, but we'll start moving
logic in shortly.
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
Start with splitting out sim/callback.h.
Use GDB's silent-rules.mk to make some rules silent by default. These
rules cover most of what is built in sim/.
gdb/ChangeLog:
* silent-rules.mk (ECHO_CCLD, ECHO_AR, ECHO_RANLIB): New.
sim/ChangeLog:
* common/Make-common.in (COMPILE, libsim.a, run$(EXEEXT),
gentmap.o, gentmap): Make rules silent.
Change-Id: Idf9ba5beaee10c7c614859ace5fbdcd1de0287db
All of the settings in here are handled by the common top-level
config.h, so drop the individual arch-config.h files entirely.
This will also help guarantee that we don't add any new arch
specific defines that would affect common code which will help
with the effort of unifying them.
