* buildsym.c (finish_block): Fix thinko `inner block' complaints.

* dbxread.c (process_one_symbol):  Parse N_OPT "gcc2_compiled.".
* procfs.c (proc_set_exec_trap): Set run-on-last-close flag on
child processes, to avoid dead ones "hanging around" after GDB exits.
(attach): Always stop the process if it needs it.  Set RLC flag
when attaching running processes, so it will continue if we detach
it, quit, or are killed.
(detach):  Clear faults and set RLC flag to make process run
when we close it.
(open_proc_file):  New `mode' argument for O_RDONLY or O_RDWR.
Callers changed.
(info_proc):  Open process O_RDONLY, so we can see any process,
even those controlled by debuggers.
* tm-sun4sol2.h (SUN_FIXED_LBRAC_BUG):  They did (in Sol 2).

gdb/ChangeLog

@@ -1,3 +1,20 @@
+Sun Jul  5 03:06:39 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (finish_block):  Fix thinko `inner block' complaints.
+	* dbxread.c (process_one_symbol):  Parse N_OPT "gcc2_compiled.".
+	* procfs.c (proc_set_exec_trap): Set run-on-last-close flag on
+	child processes, to avoid dead ones "hanging around" after GDB exits.
+	(attach): Always stop the process if it needs it.  Set RLC flag
+	when attaching running processes, so it will continue if we detach
+	it, quit, or are killed.
+	(detach):  Clear faults and set RLC flag to make process run
+	when we close it.
+	(open_proc_file):  New `mode' argument for O_RDONLY or O_RDWR.
+	Callers changed.
+	(info_proc):  Open process O_RDONLY, so we can see any process,
+	even those controlled by debuggers.
+	* tm-sun4sol2.h (SUN_FIXED_LBRAC_BUG):  They did (in Sol 2).
+
 Sat Jul  4 03:43:38 1992  John Gilmore  (gnu at cygnus.com)
 
 	Relocate symbols using an array of section_offsets, rather than a

gdb/buildsym.c

@@ -450,8 +450,10 @@ finish_block (symbol, listhead, old_blocks, start, end, objfile)
 	   amount of time.  */
 	if (BLOCK_START (pblock->block) < BLOCK_START (block)
 	 || BLOCK_END   (pblock->block) > BLOCK_END   (block)) {
-	  complain(symbol? &innerblock_complaint : &innerblock_anon_complaint,
+	  if (symbol)
-	           SYMBOL_NAME (symbol));
+	    complain(&innerblock_complaint, SYMBOL_NAME (symbol));
+	  else
+	    complain(&innerblock_anon_complaint, 0);
 	  BLOCK_START (pblock->block) = BLOCK_START (block);
 	  BLOCK_END   (pblock->block) = BLOCK_END   (block);
 	}

gdb/dbxread.c

@@ -1929,9 +1929,19 @@ process_one_symbol (type, desc, valu, name, section_offsets, objfile)
 	define_symbol (valu, name, desc, type, objfile);
       break;
 
+    /* We use N_OPT to carry the gcc2_compiled flag.  Sun uses it
+       for a bunch of other flags, too.  Someday we may parse their
+       flags; for now we ignore theirs and hope they'll ignore ours.  */
+    case N_OPT:			/* Solaris 2:  Compiler options */
+      if (name)
+	{
+	  if (!strcmp (name, GCC2_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 1;
+	}
+      break;
+
     /* The following symbol types can be ignored.  */
     case N_OBJ:			/* Solaris 2:  Object file dir and name */
-    case N_OPT:			/* Solaris 2:  Optimization level? */
     /*   N_UNDF: 		   Solaris 2:  file separator mark */
     /*   N_UNDF: -- we will never encounter it, since we only process one
 		    file's symbols at once.  */

gdb/procfs.c

@@ -1,5 +1,5 @@
 /* Machine independent support for SVR4 /proc (process file system) for GDB.
-   Copyright (C) 1991 Free Software Foundation, Inc.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
    Written by Fred Fish at Cygnus Support.
 
 This file is part of GDB.
@@ -362,7 +362,7 @@ static int
 proc_address_to_fd PARAMS ((CORE_ADDR, int));
 
 static int
-open_proc_file PARAMS ((int, struct procinfo *));
+open_proc_file PARAMS ((int, struct procinfo *, int));
 
 static void
 close_proc_file PARAMS ((struct procinfo *));
@@ -1279,7 +1279,7 @@ void
 inferior_proc_init (pid)
      int pid;
 {
-  if (!open_proc_file (pid, &pi))
+  if (!open_proc_file (pid, &pi, O_RDWR))
     {
       proc_init_failed ("can't open process file");
     }
@@ -1435,6 +1435,21 @@ proc_set_exec_trap ()
 #if defined (PIOCRFORK)	/* Original method */
   ioctl (fd, PIOCRFORK, NULL);
 #endif
+#endif
+
+  /* Turn on run-on-last-close flag so that this process will not hang
+     if GDB goes away for some reason.  */
+
+#if defined (PIOCSET)	/* New method */
+  {
+      long pr_flags;
+      pr_flags = PR_RLC;
+      (void) ioctl (fd, PIOCSET, &pr_flags);
+  }
+#else
+#if defined (PIOCSRLC)	/* Original method */
+  (void) ioctl (fd, PIOCSRLC, 0);
+#endif
 #endif
 }
 
@@ -1601,7 +1616,8 @@ NOTES
 
 	The option of stopping at attach time is specific to the /proc
 	versions of gdb.  Versions using ptrace force the attachee
-	to stop.
+	to stop.  (I have changed this version to do so, too.  All you
+	have to do is "continue" to make it go on. -- gnu@cygnus.com)
 
 */
 
@@ -1609,7 +1625,9 @@ int
 attach (pid)
      int pid;
 {
-  if (!open_proc_file (pid, &pi))
+  int result;
+
+  if (!open_proc_file (pid, &pi, O_RDWR))
     {
       perror_with_name (pi.pathname);
       /* NOTREACHED */
@@ -1632,8 +1650,26 @@ attach (pid)
   else
     {
       pi.was_stopped = 0;
-      if (query ("Process is currently running, stop it? "))
+      if (1 || query ("Process is currently running, stop it? "))
 	{
+	  /* Make it run again when we close it.  */
+#if defined (PIOCSET)	/* New method */
+	  {
+	      long pr_flags;
+	      pr_flags = PR_RLC;
+	      result = ioctl (pi.fd, PIOCSET, &pr_flags);
+	  }
+#else
+#if defined (PIOCSRLC)	/* Original method */
+	  result = ioctl (pi.fd, PIOCSRLC, 0);
+#endif
+#endif
+	  if (result < 0)
+	    {
+	      print_sys_errmsg (pi.pathname, errno);
+	      close_proc_file (&pi);
+	      error ("PIOCSRLC or PIOCSET failed");
+	    }
 	  if (ioctl (pi.fd, PIOCSTOP, &pi.prstatus) < 0)
 	    {
 	      print_sys_errmsg (pi.pathname, errno);
@@ -1647,7 +1683,7 @@ attach (pid)
 	  printf ("Ok, gdb will wait for process %u to stop.\n", pid);
 	}
     }
-  
+
   /*  Remember some things about the inferior that we will, or might, change
       so that we can restore them when we detach. */
   
@@ -1709,6 +1745,8 @@ void
 detach (signal)
      int signal;
 {
+  int result;
+
   if (signal)
     {
       set_proc_siginfo (&pi, signal);
@@ -1750,12 +1788,29 @@ detach (signal)
 	  if (signal || !pi.was_stopped ||
 	      query ("Was stopped when attached, make it runnable again? "))
 	    {
-	      memset (&pi.prrun, 0, sizeof (pi.prrun));
+	      /* Clear any fault that might have stopped it.  */
-	      pi.prrun.pr_flags = PRCFAULT;
+	      if (ioctl (pi.fd, PIOCCFAULT, 0))
-	      if (ioctl (pi.fd, PIOCRUN, &pi.prrun))
+  		{
+  		  print_sys_errmsg (pi.pathname, errno);
+		  printf ("PIOCCFAULT failed.\n");
+  		}
+
+	      /* Make it run again when we close it.  */
+#if defined (PIOCSET)	/* New method */
+	      {
+		  long pr_flags;
+		  pr_flags = PR_RLC;
+		  result = ioctl (pi.fd, PIOCSET, &pr_flags);
+	      }
+#else
+#if defined (PIOCSRLC)	/* Original method */
+	      result = ioctl (pi.fd, PIOCSRLC, 0);
+#endif
+#endif
+	      if (result)
 		{
 		  print_sys_errmsg (pi.pathname, errno);
-		  printf ("PIOCRUN failed.\n");
+		  printf ("PIOCSRLC or PIOCSET failed.\n");
 		}
 	    }
 	}
@@ -2238,15 +2293,16 @@ LOCAL FUNCTION
 
 SYNOPSIS
 
-	static int open_proc_file (pid, struct procinfo *pip)
+	static int open_proc_file (int pid, struct procinfo *pip, int mode)
 
 DESCRIPTION
 
-	Given a process id, close the existing open /proc entry (if any)
+	Given a process id and a mode, close the existing open /proc
-	and open one for the new process id.  Once it is open, then
+	entry (if any) and open one for the new process id, in the
-	mark the local process information structure as valid, which
+	specified mode.  Once it is open, then mark the local process
-	guarantees that the pid, fd, and pathname fields match an open
+	information structure as valid, which guarantees that the pid,
-	/proc entry.  Returns zero if the open fails, nonzero otherwise.
+	fd, and pathname fields match an open /proc entry.  Returns
+	zero if the open fails, nonzero otherwise.
 
 	Note that the pathname is left intact, even when the open fails,
 	so that callers can use it to construct meaningful error messages
@@ -2254,11 +2310,12 @@ DESCRIPTION
  */
 
 static int
-open_proc_file (pid, pip)
+open_proc_file (pid, pip, mode)
      int pid;
      struct procinfo *pip;
+     int mode;
 {
-  pip -> valid = 0;
+  pip -> valid = 0;		/* FIXME, what is this? ?!  */
   if (pip -> valid)
     {
       close (pip -> fd);
@@ -2268,7 +2325,7 @@ open_proc_file (pid, pip)
       pip -> pathname = xmalloc (32);
     }
   sprintf (pip -> pathname, PROC_NAME_FMT, pid);
-  if ((pip -> fd = open (pip -> pathname, O_RDWR)) >= 0)
+  if ((pip -> fd = open (pip -> pathname, mode)) >= 0)
     {
       pip -> valid = 1;
       pip -> pid = pid;
@@ -2843,7 +2900,7 @@ info_proc (args, from_tty)
 	      pid = pii.pid;
 	      pip = &pii;
 	      memset (&pii, 0, sizeof (pii));
-	      if (!open_proc_file (pid, pip))
+	      if (!open_proc_file (pid, pip, O_RDONLY))
 		{
 		  perror_with_name (pip -> pathname);
 		  /* NOTREACHED */

gdb/tm-sun4sol2.h

@@ -30,9 +30,16 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
 #define	BLOCK_ADDRESS_FUNCTION_RELATIVE
 
-/* Variables in the debug stabs occur after the N_LBRAC, not before it.  */
+/* Variables in the debug stabs occur after the N_LBRAC, not before it,
+   in code generated by Sun C.  */
 
-#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (!gcc_p)
+#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (!(gcc_p))
+
+/* There's no need to correct LBRAC entries by guessing how they should
+   work.  In fact, this is harmful because the LBRAC entries now all appear
+   at the end of the function, not intermixed with the SLINE entries.  */
+
+#define	SUN_FIXED_LBRAC_BUG
 
 /* May be needed, may be not?  From Pace Willisson's port.  FIXME.  */
 #define PROLOGUE_FIRSTLINE_OVERLAP